E3Z-T82-D2M [OMRON]
Retroreflective Photoelectric Sensor;
| 型号： | E3Z-T82-D2M |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Retroreflective Photoelectric Sensor 传感器 换能器 |
| 文件： | 总19页 (文件大小：2809K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Compact Photoelectric Sensor with Built-in Amplifier
E3Z
CSM_E3Z_DS_E_15_1
The Standard for Photoelectric Sensors
with a Secure Track Record of One
Million Sold Yearly.
• Long sensing distance of 30 m for Through-beam Models, 4 m for
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
• Mechanical axis and optical axis offset of less than 2.5° simplifies
optical axis adjustment.
• High stability with unique algorithm that prevents interference of
external light.
Be sure to read Safety Precautions on
page 15.
Features
Industry's Top-level Sensing Distance with
Built-in Amplifier
Through-beam
A separately sold filter is available to prevent mutual interference for
Through-beam Models with red lights sources and a sensing
distance of 10 m. Reflective Models include functionality to prevent
mutual interference.
30 m
Retro-reflective with MSR function
Distance-settable
20 cm
4 m
Diffuse-reflective
Long-distance, Through-beam Sensors with a detection distance of
30 m (response time: 2 ms) are also available.
1 m
Low-temperature Operation for Applications in Cold-storage Warehouses
A wider ambient operating range from −40 to 55°C (main models with connectors). We also provide Sensor I/O Connectors with PUR Cables for
high resistance to cold environments.
Improved Matching of Optical Axis and Mechanical Axis for
Through-beam Models and Retro-reflective Models
30 m
mechanical
axis
2.5° max.
The offset between the optical axis and the mechanical axis is kept within 2.5°, so the optical axis can
be accurately set simply by mounting the Sensor according to the mechanical axis.
Optical axis
The receiver will always be in the range of light diffusion.
Sensor Protection against Incorrect Wiring
The Sensor includes output reverse polarity protection.
Through-beam Model receivers and Reflective Models (except the E3Z-LS)
12 to 24 VDC
Brown
1
Operation
indicator
(orange)
Stability
indicator
(green)
Load
(A diode to protect against reverse polarity is added to the output line.)
100 mA
max.
(relay)
0 V
Black
Photo-
4
3
electric
Sensor
main
ZD
Blue
circuit
Protection for NPN output models
Complete Compliance with the EU's RoHS Directive
Lead, mercury, cadmium hexachrome, polybrominated biphenyl (PBB), and polybrominated
diphenyl ether (PBDE) have all been eliminated. Also, burnable polyethylene packaging has
been used.
Pb
eco
1
E3Z
Ordering Information
Sensors [Refer to Dimensions on page 16.]
Red light
Infrared light
Model
Sensing method
Appearance
Connection method
Sensing distance
NPN output
E3Z-T61 2M
PNP output
E3Z-T81 2M
Emitter E3Z-T81-L 2M
Receiver E3Z-T81-D 2M
Pre-wired (2 m)
Emitter E3Z-T61-L 2M
Receiver E3Z-T61-D 2M
15 m
E3Z-T66
E3Z-T86
Standard M8 connector
Pre-wired (2 m)
Emitter E3Z-T66-L
Receiver E3Z-T66-D
Emitter E3Z-T86-L
Receiver E3Z-T86-D
E3Z-T61A 2M
Emitter E3Z-T61-A-L 2M
Receiver E3Z-T61-A-D 2M Receiver E3Z-T81-A-D 2M
E3Z-T81A 2M
Emitter E3Z-T81-A-L 2M
Through-beam
(Emitter + Receiver)
*3
10 m
E3Z-T66A
Emitter E3Z-T66-A-L
Receiver E3Z-T66-A-D
E3Z-T86A
Emitter E3Z-T86-A-L
Receiver E3Z-T86-A-D
Standard M8 connector
Pre-wired (2 m)
E3Z-T62 2M
Emitter E3Z-T62-L 2M
Receiver E3Z-T62-D 2M
E3Z-T82 2M
Emitter E3Z-T82-L 2M
Receiver E3Z-T82-D 2M
30m
E3Z-T67
Emitter E3Z-T67-L
Receiver E3Z-T67-D
E3Z-T87
Emitter E3Z-T87-L
Receiver E3Z-T87-D
Standard M8 connector
Pre-wired (2 m)
E3Z-R61 2M
E3Z-R66
E3Z-R81 2M
E3Z-R86
Retro-reflective with
MSR function
*2
4 m
*1
Standard M8 connector
Pre-wired (2 m)
(100 mm)
E3Z-D61 2M
E3Z-D66
E3Z-D81 2M
E3Z-D86
5 to 100 mm
(wide view)
Standard M8 connector
Pre-wired (2 m)
E3Z-D62 2M
E3Z-D67
E3Z-D82 2M
E3Z-D87
Diffuse-reflective
1 m
Standard M8 connector
Pre-wired (2 m)
E3Z-L61 2M
E3Z-L66
E3Z-L81 2M
E3Z-L86
90 30 mm
(narrow beam)
Standard M8 connector
20 to 40 mm (BGS min setting)
Pre-wired (2 m)
E3Z-LS61 2M
E3Z-LS66
E3Z-LS81 2M
E3Z-LS86
20 to 200 mm (BGS max setting)
40 min. Incident threshold (FGS min setting)
200 min. Incident threshold (FGS max setting)
Distance-settable
Refer to E3Z-LS.
Standard M8 Connector
Pre-wired (2 m)
E3Z-LS63 2M
E3Z-LS68
E3Z-LS83 2M
E3Z-LS88
2 to 20 mm (BGS min setting)
2 to 80 mm (BGS max setting)
Standard M8 connector
1 axis
2 axes
1 axis
2 axes
E3Z-G61 2M
E3Z-G62 2M
E3Z-G61-M3J
E3Z-G62-M3J
E3Z-L63 2M
E3Z-L68
E3Z-G81 2M
E3Z-G82 2M
E3Z-G81-M3J
E3Z-G82-M3J
E3Z-L83 2M
E3Z-J88
Pre-wired (2 m)
Slit-type Through-
beam
Refer to E3Z-G.
25 mm
Pre-wired M8 connector
Pre-wired (2 m)
Limited-reflective for
transparent glasses
30 20 mm
Standard M8 connector
Pre-wired (2 m)
*2
E3Z-B61 2M
E3Z-B66
E3Z-B81 2M
E3Z-B86
500 mm (80 mm)
Retro-reflective with-
out MSR function for
clear, plastic bottles
Standard M8 connector
Pre-wired (2 m)
*1
*2
E3Z-B62 2M
E3Z-B67
E3Z-B82 2M
E3Z-B87
2 m (500 mm)
Standard M8 connector
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
2
E3Z
Variety of Connection Specifications
The models with the connection specifications marked with a black circle in the table are available.
The model number indication is a combination of the basic model and the connection specification.
Example: E3Z-T61-M1TJ 0.3M
Basic model Connection
number
specification
NPN Output
Model
number
example
E3Z-T61
-M1TJ 0.3M
E3Z-T61
-M1J 0.3M
E3Z-T61
-M3J 0.3M
Model
E3Z-T61 0.5M
E3Z-T61 5M
Connec-
M12 pre-wired
Pre-wired
(cable length:
0.5 m)
M12 pre-wired stan- M8, 4-pin pre-wired
tion Smartclick connec-
specifica-
tion
Pre-wired
(cable length: 5 m)
dard connector (ca-
ble length: 0.3 m)
connector (cable
length: 0.3 m)
tor (cable length:
0.3 m)
Sens-
ing dis-
tance
Sensing
method
Main
features
Basic
model
-M1TJ 0.3M
0.5M
5M
-M1J 0.3M
-M3J 0.3M
number
Infrared
light
15 m
10 m
30 m
4 m
E3Z-T61
E3Z-T61A
E3Z-T62
E3Z-R61
E3Z-D61
●
---
---
●
●
●
●
●
●
●
●
---
●
●
●
●
---
●
●
●
---
---
●
Through-
beam
Red
light
2-ms re-
sponse
Retro-
reflective
MSR
function
Wide
view
100 mm
---
●
Diffuse-
reflective
(narrow-
beam re-
flective)
Long
dis-
tance
1 m
E3Z-D62
●
●
●
●
●
Narrow
beam
90 mm
200 mm
80 mm
E3Z-L61
E3Z-LS61
E3Z-LS63
E3Z-G61
●
---
---
●
●
●
●
●
●
●
●
●
---
●
FGS
function
Distance-
settable
Small
spot
---
●
---
●
---
●
1optical
axis
Slit-type
25 mm
2optical
axes
E3Z-G62
E3Z-B61
---
---
●
●
●
●
●
●
Retro-
500 mm
2 m
---
---
reflective
for clear,
plastic
No MSR
function
E3Z-B62
---
●
●
●
---
bottles
3
E3Z
PNP Output
Model
number
example
E3Z-T81
-M1TJ 0.3M
E3Z-T81
-M1J 0.3M
E3Z-T81
-M3J 0.3M
Model
E3Z-T81 0.5M
E3Z-T81 5M
Connec-
M12 pre-wired
Pre-wired
(cable length:
0.5 m)
M12 pre-wired stan- M8, 4-pin pre-wired
tion Smartclick connec-
specifica-
tion
Pre-wired
(cable length: 5 m)
dard connector (ca-
ble length: 0.3 m)
connector (cable
length: 0.3 m)
tor (cable length:
0.3 m)
Sens-
ing dis-
tance
Sensing
method
Main
features
Basic
model
-M1TJ 0.3M
0.5M
5M
-M1J 0.3M
-M3J 0.3M
number
Infrared
light
15 m
10 m
30 m
4 m
E3Z-T81
E3Z-T81A
E3Z-T82
E3Z-R81
E3Z-D81
●
---
---
●
●
---
●
●
●
●
---
---
●
●
●
---
●
●
●
---
---
●
Through-
beam
Red
light
2-ms re-
sponse
Retro-
reflective
MSR
function
Wide
view
100 mm
●
●
●
Diffuse-
reflective
(narrow-
beam
Long
dis-
tance
1 m
E3Z-D82
●
●
●
●
●
reflective)
Narrow
beam
90 mm
200 mm
80 mm
E3Z-L81
E3Z-LS81
E3Z-LS83
E3Z-G81
●
---
---
●
●
●
●
●
●
●
●
●
---
●
---
●
FGS
function
Distance-
settable
Small
spot
---
---
---
●
1optical
axis
Slit-type
25 mm
2optical
axes
E3Z-G82
E3Z-B81
---
---
●
●
---
---
●
●
●
Retro-
500 mm
2 m
---
reflective
for clear,
plastic
No MSR
function
E3Z-B82
---
●
●
●
---
bottles
4
E3Z
Oil-resistive Sensors [Refer to Dimensions on page 16.]
Red light
Model
Infrared light
Connection meth-
Sensing method
Appearance
Sensing distance
od
NPN output
E3Z-T61K 2M
Emitter E3Z-T61K-L 2M
Receiver E3Z-T61K-D 2M
PNP output
E3Z-T81K 2M
Emitter E3Z-T81K-L 2M
Receiver E3Z-T81K-D 2M
Pre-wired (2 m)
Through-beam
(Emitter + Receiver) *3
15 m
E3Z-T61K-M3J 0.3M
E3Z-T81K-M3J 0.3M
Pre-wired M8 connector
Emitter
E3Z-T61K-L-M3J 2M Emitter E3Z-T81K-L-M3J 2M
Receiver E3Z-T61K-D-M3J 2M Receiver E3Z-T81K-D-M3J 2M
Pre-wired (2 m)
*2
E3Z-R61K 2M
E3Z-R81K 2M
Retro-reflective with
MSR function
3 m (150 mm)
*1
Pre-wired M8 connector
Pre-wired (2 m)
E3Z-R61K-M3J 0.3M
E3Z-D61K 2M
E3Z-R81K-M3J 0.3M
E3Z-D81K 2M
5 to 100 mm (wide view)
Pre-wired M8 connector
Pre-wired (2 m)
E3Z-D61K-M3J 0.3M
E3Z-D62K 2M
E3Z-D81K-M3J 0.3M
E3Z-D82K 2M
Diffuse-reflective
1 m
Pre-wired M8 connector
E3Z-D62K-M3J 0.3M
E3Z-D82K-M3J 0.3M
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
Accessories (Order Separately)
Slit (A Slit is not provided with Through-beam Sensors) Order a Slit separately if required. [Refer to Dimensions on page 18.]
Sensing distance
Minimum detectable object
(typical)
Slit width
Model
E39-S65A
E39-S65B
E39-S65C
E39-S65D
E39-S65E
E39-S65F
Contents
E3Z-T@@
E3Z-T@@A
35 mm
0.5-mm dia.
1-mm dia.
2-mm dia.
0.5 × 10 mm
1 × 10 mm
2 × 10 mm
50 mm
200 mm
800 mm
1 m
0.2-mm dia.
0.4-mm dia.
0.7-mm dia.
0.2-mm dia.
0.5-mm dia.
0.8-mm dia.
150 mm
550 mm
700 mm
1.5 m
One set
(contains Slits for
both the Emitter and
Receiver)
2.2 m
5 m
3.5 m
Reflectors (Reflector required for Retroreflective Sensors) A Reflector is not provided with the Sensor. Be sure to order a Reflector separately.
[Refer to Dimensions on E39-L/F39-L/E39-S/E39-R]
Sensing distance (typical)*
Name
Model
E39-R1
E39-R1S
Quantity
Remarks
E3Z-R
3 m (100 mm)
(rated value)
4 m (100 mm)
(rated value)
5 m (100 mm)
2.5 m (100 mm)
3.5 m (100 mm)
E3Z-R@K
E3Z-B@1/-B@6
E3Z-B@2/-B@7
2 m (100 mm)
(rated value)
---
---
1
1
3 m (150 mm)
(rated value)
500 mm (80 mm)
(rated value)
2 m (500 mm)
(rated value)
Reflector
• Retro-reflective
models are not
provided with
Reflectors.
• The MSR function
is enabled.
---
---
---
---
---
---
---
---
---
E39-R2
E39-R9
E39-R10
1
1
1
Fog Preventive
Coating
Small Reflector
500 mm (80 mm)
(rated value)
2 m (500 mm)
(rated value)
3 m (100 mm)
---
E39-R1K
1
1.5 m (50 mm)
700 mm (150 mm)
1.1 m (150 mm)
1.4 m (150 mm)
---
---
---
---
---
---
---
---
---
---
---
---
E39-R3
1
1
1
1
E39-RS1
E39-RS2
E39-RS3
Tape Reflector
Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other than E39-R1 or E39-R1S.
*1. Refer to Reflectors on E39-L/F39-L/E39-S/E39-R for details.
*2. Values in parentheses indicates the minimum required distance between the Sensor and Reflector.
Mutual Interference Protection Filter A Filter is not provided with the Sensor (for the through-beam E3Z-T@@A). Order a Filter separately if required.
Sensing distance Appearance/Dimensions
Model
Quantity
Remarks
4.9
10.8
7.4
Can be used with the E3Z-T@@A Through-
beam models. The arrow indicates the direc-
tion of polarized light. Mutual interference
can be prevented by altering the direction of
polarized light from or to adjacent Emitters
and Receivers.
1
Two sets each for the
Emitter and Receiver
(total of four pieces)
3 m
E39-E11
31.4 11.2
0.2
5
E3Z
Mounting Brackets A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
[Refer to Dimensions on E39-L/F39-L/E39-S/E39-R]
Appearance Model (material) Quantity
Remarks
Appearance Model (material) Quantity
Remarks
E39-L153
1
E39-L98
1
Metal Protective Cover
Bracket
(SUS304) *1
(SUS304) *2
Mounting Brackets
E39-L104
1
E39-L150
1
(SUS304) *1
(SUS304)
(Sensor adjuster)
Easily mounted to the
aluminum frame rails of
conveyors and easily
adjusted.
E39-L43
1
Horizontal Mounting
Brackets
(SUS304) *2
E39-L151
1
For left to right adjust-
ment
(SUS304)
E39-L142
1
Horizontal Protective
Cover Bracket
(SUS304) *2
Compact Protective
Cover Bracket (For E3Z
only)
E39-L44
1
E39-L144
1
Rear Mounting Bracket
(SUS304)
(SUS304) *2
Note: 1. When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors
(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
[Refer to Dimensions for XS3, XS2, XS5. For e-CON, inquire.]
Size
Cable
Appearance
Cable type
2 m
Model
XS3F-M421-402-A
XS3F-M421-405-A
Straight *3
5 m
2 m
5 m
2 m
M8 *1
4-wire
XS3F-M422-402-A
XS3F-M422-405-A
XS2F-D421-DC0-A
L-shaped *3 *4
Straight *3
Standard
5 m
2 m
5 m
2 m
5 m
2 m
5 m
2 m
5 m
XS2F-D421-GC0-A
XS2F-D422-DC0-A
XS2F-D422-GC0-A
XS5F-D421-D80-A
XS5F-D421-G80-A
XS3F-M421-402-L
XS3F-M421-405-L
XS3F-M422-402-L
XS3F-M422-405-L
M12 *1
(For -M1J models)
3-wire
L-shaped *3
M12
4-wire
4-wire
Straight
(For -M1TJ models)
Straight *3
L-shaped *3 *4
PUR
(Polyure-
thane) cable *2
M8
Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter.
*1. Refer to Introduction to Sensor I/O Connectors for details.
*2. The Sensor can be used in low-temperature environments (−25°C to −40°C). Do not use the Sensor in locations that are subject to oil.
*3. The connector will not rotate after connecting.
*4. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
6
E3Z
Ratings and Specifications
Retro-reflective with
MSR function
(Narrow-
beam Models)
Sensing method
Through-beam
Diffuse-reflective
NPN
out-
put
Pre-wired
Connector (M8)
Pre-wired
E3Z-T61
E3Z-T66
E3Z-T81
E3Z-T86
E3Z-T62
E3Z-T67
E3Z-T82
E3Z-T87
E3Z-T61A
E3Z-T66A
E3Z-T81A
E3Z-T86A
E3Z-R61
E3Z-R66
E3Z-R81
E3Z-R86
E3Z-D61
E3Z-D62
E3Z-D67
E3Z-D82
E3Z-D87
E3Z-L61
E3Z-D66
E3Z-D81
E3Z-D86
E3Z-L66
E3Z-L81
E3Z-L86
Model
PNP
out-
put
Item
Connector (M8)
4 m (100 mm) *1
(when using E39-R1S)
3 m (100 mm) *1
100 mm
(white paper:
100 × 100 mm) 300 × 300 mm) 100 x 100 mm)
1 m
(white paper:
90 + 30 mm
(white paper,
Sensing distance
15 m
30 m
10 m
(when using E39-R1)
(2.5 dia. and
sensing dis-
tance of
Spot diameter (typical)
Standard sensing object
---
90 mm)
Opaque: 12-mm dia. min.
Opaque: 75-mm dia. min.
---
---
0.1 mm (cop-
per wire)
Minimum detectable object (typical)
Refer to Engi-
neering data
Differential travel
---
20% max. of setting distance
on page 10.
Directional angle
Both emitter and receiver: 3 to 15°
Red LED
(660 nm)
2 to 10°
---
Red LED
(650 nm)
Light source (wavelength)
Infrared LED (870 nm)
Red LED (660 nm)
Infrared LED (860 nm)
35 mA max. (Emitter: 15 mA max., Receiv-
er: 20 mA max.)
Current consumption
Protection circuits
30 mA max.
Reversed power supply polarity protection,
Output short-circuit protection, and Re-
versed output polarity protection
Reversed power supply polarity protection, Output short-circuit protection,
Mutual interference prevention, and Reversed output polarity protection
Operate or
reset:
1 ms max.
Operate or
reset:
2 ms max.
Response time
Operate or reset: 1 ms max.
Degree of protection
Connection method
IEC, IP67
Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8)
Pre-wired cable (2 m) Approx. 120 g
Approx. 65 g
Approx. 20 g
Weight
(packedstate)
Connector
Case
Approx. 30 g
PBT (polybutylene terephthalate)
Modified polyarylate
Material
Lens
Methacrylic resin
Modified polyarylate
Sensing method
Retro-reflective for clear, plastic bottles (without MSR function)
NPN output
PNP output
E3Z-B61
E3Z-B81
E3Z-B66
E3Z-B86
E3Z-B62
E3Z-B82
E3Z-B67
E3Z-B87
Model
Item
Sensing distance
500 mm (80 mm) *1 (using E39-R1S)
500-ml (65-mm dia.) transparent round plastic bottles
Red LED (660 nm)
2 m (500 mm) *1 *2 (using E39-R1S)
Standard sensing object
Light source (wavelength)
Current consumption
30 mA max.
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention,
and Reversed output polarity protection
Protection circuits
Response time
Operate or reset: 1 ms max.
IEC, IP67
Degree of protection
Pre-wired cable (standard
length: 2 m and 0.5 m)
Pre-wired cable (standard
length: 2 m and 0.5 m)
Connection method
Connector (M8, 4 pins)
Connector (M8, 4 pins)
Weight
(packed
state)
Pre-wired cable (2 m)
Standard Connector
Approx. 65 g
Approx. 20 g
Case
Lens
PBT (polybutylene terephthalate)
Modified polyarylate
Material
*1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.
*2. Plastic bottles must pass with the minimum clearance of 500 mm.
7
E3Z
Sensing method
Model NPN output
PNP output
Transparent glass Limited-reflective (for transparent object detection )
E3Z-L63
E3Z-L83
E3Z-L68
E3Z-L88
Item
Sensing distance
Spot diameter
30 20 mm (transparent glasses 100 × 100 mm)
2-mm dia. min. (at sensing distance of 30 mm)
0.1 mm dia. (copper wire)
Red LED (660 nm)
Minimum detectable object (typical)
Light source (wavelength)
Current consumption
30 mA max.
Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention,
Reverse output polarity protection
Protection circuits
Response time
Operate or reset: 1 ms max.
IEC, IP67
Degree of protection
Connection method
Pre-wired (standard length: 2 m)
Approx. 65 g
M8 connector
Pre-wired cable (2 m)
Weight
(packed state)
Standard Connector
Approx. 20 g
Case
Material
PBT (polybutylene terephthalate)
Modified polyarylate
Lens
8
E3Z
Oil-resistant
Sensing method
Through-beam
Retro-reflective
E3Z-R61K
Diffuse-reflective
E3Z-D62K
NPN
Pre-wired Models E3Z-T61K
M8 Pre-wired connector E3Z-T61K-M3J
Pre-wired Models E3Z-T81K
E3Z-D61K
out-
put
E3Z-R61K-M3J
E3Z-R81K
E3Z-D61K-M3J
E3Z-D81K
E3Z-D62K-M3J
Model
PNP
out-
put
E3Z-D82K
Item
M8 Pre-wired connector E3Z-T81K-M3J
E3Z-R81K-M3J
E3Z-D81K-M3J
E3Z-D82K-M3J
3 m (150 mm) *
(when using E39-R1S)
2 m (100 mm) *
(when using E39-R1)
100 mm
(white paper: 100 ×
100 mm)
1 m
Sensing distance
15 m
(white paper: 300 ×
300 mm)
Standard sensing object
Differential travel
Opaque: 12-mm dia. min. Opaque: 75-mm dia. min.
---
---
20% max. of setting distance
---
Both emitter and receiver:
2 to 10°
Directional angle
3 to 15°
Light source (wavelength)
Infrared LED (870 nm)
Red LED (660 nm)
30 mA max.
Infrared LED (860 nm)
35 mA max. (Emitter:
15 mA max., Receiver:
20 mA max.)
Current consumption
Reversed power supply
polarity protection, Output
short-circuit protection,
and Reversed output po-
larity protection
Reversed power supply polarity protection, Output short-circuit protection, Mutual in-
terference prevention, and Reversed output polarity protection
Protection circuits
Response time
Operate or reset: 1 ms max.
Degree of protection
Connection method
IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof), excluding cables and connectors
Pre-wired cable (standard length: 2 m), M8 Pre-wired Connector
Weight
(packed
state)
Pre-wired cable (2 m)
Approx. 120 g
Approx. 50 g
Approx. 65 g
Approx. 30 g
Connector (M8, 4 pins)
Case
Lens
PBT (polybutylene terephthalate)
Modified polyarylate Methacrylic resin
Material
Modified polyarylate
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Common
Power supply voltage
12 to 24 VDC 10%, ripple (p-p): 10% max.
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max.
Residual voltage: Load current of less than 10 mA: 1 V max.
Load current of 10 to 100 mA: 2 V max.
Control output
Open collector output (NPN/PNP depending on model)
Light-ON/Dark-ON selectable
Sensitivity adjustment
One-turn adjuster
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient illumination (Receiver side)
Operating: −25 to 55°C, Some connector models: −40°C to 55°C * (with no icing or condensation)
Storage: −40 to 70°C (with no icing or condensation)
Ambient temperature range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Operation indicator (orange)
Stability indicator (green)
Indicator
Through-beam Emitter has power indicator (orange) only.
Accessories
Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.)
* The ambient temperature range during operation for connector models depends on the model. For the E3Z-T66/T86/R66/R86, the range is −40°C to 55°C. For the
E3Z-D66/D86/D67/D87, the range is −30°C to 55°C. For other connector models, the range is −25°C to −55°C.
The sensing distance for Retro-reflective Models (E3Z-R66/R86) between −40°C to −25°C, however, will be as follows (not the values in the table):
With E39-R1S: 3 m (100 mm), With E39-R1: 2 m (100 mm).
Also, use the XS3F-M42@-4@@-L Sensor I/O Connector (PUR cable) for applications between −25°C to −40°C. (Refer to page 6.)
9
E3Z
Engineering Data (Typical)
Parallel Operating Range
Through-beam Models
E3Z-T@1(T@6)
Through-beam Models
Through-beam Models
E3Z-T@A
E3Z-T@2(T@7)
1000
1000
2.0
800
800
600
Y
1.5
600
400
200
0
X
1.0
0.5
0
400
200
0
10
20
30
40
Distance
X (m)
10
20
30
40
Distance
10
20
30
40
Distance
−200
−400
−600
−800
−200
−400
−600
−800
−0.5
−1.0
−1.5
−2.0
X (m)
X (m)
Y
X
−
1000
−
1000
Through-beam Models
Through-beam Models
Retro-reflective Models
E3Z-T@1(T@6) and Slit
(A Slit is mounted to the Emitter and
Receiver.)
E3Z-T@A and Slit
(A Slit is mounted to the Emitter and
Receiver.)
E3Z-R@1(R@6) and Reflector
200
200
250
E39-R10
E39-R1K
Y
X
Y
200
150
100
50
Y
150
150
E39-R3
X
X
100
50
100
50
0
Distance X (m)
0
−50
0
2
4
6
8
1
2
3
4
5
1
2
3
4
5
Distance
Distance
−50
−100
−150
−200
−250
−50
X (m)
X (m)
E39-S65B
E39-S65C
E39-S65D
E39-S65B
E39-S65C
E39-S65D
−100
−100
−150
−200
E39-R9
−150
−200
E39-S65E
E39-R2
E39-S65E
E39-R1
E39-R1S
E39-S65F
E39-S65F
E3Z-B@1/B@6 + E39-R1S Reflector
(Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
50
100
Reflector: E39-R1S
Reflector: E39-R1S
40
30
80
60
40
Y
Y
20
X
X
10
20
0
0
0.5
1
1.5
2
2.5
3
0.5
1
1.5
2
2.5
3
3.5
4 4.5
Distance X (m)
Distance X (m)
−20
−40
−60
−10
−20
−30
2-m type
−80
−40
−50
500-mm type
−100
10
E3Z
Operating Range
Diffuse-reflective Models
E3Z-D@1(D@6)
Diffuse-reflective Models
Narrow-beam Reflective Models
E3Z-D@2(D@7)
E3Z-L@1(L@6)
10
30
80
Sensing object: 100 × 100 mm
Sensing object: 300 × 300 mm white paper
Sensing object: 100 × 100 mm white paper
white paper
Y
8
60
40
Y
Y
20
6
X
X
X
4
10
0
20
2
0
0
50
100
150
200
250
Distance
0.2
0.4
0.6
0.8 1.0
1.2 1.4 1.6
Distance
X (m)
50
100
150
250
Distance
X (m)
200
−2
−4
−20
−40
X (m)
−10
−20
−30
−6
−60
−80
−8
−10
Excess Gain vs. Set Distance
Through-beam Models
Retro-reflective Models
Diffuse-reflective Models
E3Z-T@1(T@6)/-T@A/-T@2(T@7)
E3Z-R@1(R@6) and Reflector
E3Z-D@1(D@6)
100
100
70
50
100
Sensing object: 100 × 100 mm white paper
30
E39-R9
E39-R1K
E3Z-T@2 (T@7)
10
10
7
10
E39-R10
E3Z-T@A
5
E39-R1S
3
E39-R2
Operating
level
1
1
0.7
0.5
1
E39-R3
E3Z-T@1 (T@6)
0.3
E39-R1
4
0.1
0.1
0
0.1
0
10
20
30
40
50
60
70 80
0
50
100
150
200
250
300 350
2
6
8
10
Distance (m)
Distance (m)
Distance (m)
Diffuse-reflective Models
Narrow-beam Reflective Models
Limited reflective Models
E3Z-D@2(D@7)
E3Z-L@1(L@6)
E3Z-L@3(L@8)
100
70
50
100
70
50
100
70
50
Sensing object: 300 × 300 mm white paper
30
30
30
SUS
10
7
5
10
7
5
10
7
5
3
3
3
White paper
Operating
1
Operating
1
Operating
level
1
0.7
0.5
level
level
0.7
0.5
0.7
0.5
Glass
0.3
0.3
0.3
0.1
0.1
0.1
0
0.5
1
1.5
2
2.5
3
0
50
100
150
200
250
300 350
0
20
40
60
80
100 120
Distance (m)
Distance (m)
Distance (m)
11
E3Z
Excess Gain vs. Set Distance
E3Z-B@1/B@6 + E39-R1S
Reflector (Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
100
100
2-m type
500-mm type
10
10
1
1
0.1
0.1
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0.5
1
1.5
2
2.5
3
Distance (m)
Distance (m)
Sensing Object Size vs. Sensing Distance
Diffuse-reflective Models
Diffuse-reflective Models
Narrow-beam Reflective Models
E3Z-D@1(D@6)
E3Z-D@2(D@7)
E3Z-L@1(L@6)
300
350
4.5
d
d
d
White paper
4
300
d
250
d
d
SUS
White paper
3.5
(glossy surface)
SUS
(glossy surface)
250
200
150
100
50
200
150
100
50
3
2.5
2
1.5
1
White paper
Black paper
Black paper
0.5
0
7.5 10
20
30
100
1
2
3
5
0
50
100
150
200
250
300 350
0
50
100
150
200
250
300 350
Side length (one side) of
sensing object: d (mm)
Side length (one side) of
sensing object: d (mm)
Side length (one side) of
sensing object: d (mm)
Spot Diameter vs. Sensing Distance
Differential Travel vs. Sensing Distance
Narrow-beam Reflective Models
Narrow-beam Reflective Models
E3Z-L@1(L@6)
E3Z-L@1(L@6)
4.0
30
3.5
25
20
15
10
5
3.0
2.5
2.0
1.5
1.0
0.5
0
20
40
60
80
100 120 140 160
Distance (mm)
0
50
75
100
125
150
Distance (mm)
12
E3Z
I/O Circuit Diagrams
NPN Output
Operation
Operation
selector
Model*
mode
Timing charts
Output circuit
Incident light
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models, Limited reflective Models.
No incident light
Operation
indicator
(orange)
Output
ON
OFF
E3Z-T61(K)
12 to 24 VDC
Brown
1
L side
(LIGHT ON)
Operation
indicator
E3Z-T66
E3Z-T62
Light-ON
Stability
indicator
(Green)
ON
Load
(Relay)
100 mA
max.
transistor
OFF
(Control
output)
(Orange)
E3Z-T67
Operate
Load
Black
Photo-
electric
Sensor
main
4
3
(e.g., relay)
(Between brown (1) and black (4) leads)
E3Z-T61A
E3Z-T66A
E3Z-R61(K)
E3Z-R66
E3Z-D61(K)
E3Z-D66
E3Z-D62(K)
E3Z-D67
E3Z-L61
Reset
ZD
Blue
circuit
Incident light
0 V
No incident light
Operation
indicator
(orange)
Output
ON
OFF
ON
Connector Pin Arrangement
D side
(DARK ON)
Dark-ON
2
4
transistor
OFF
1
3
Operate
(e.g., relay)
Load
Reset
(Between brown (1) and black (4) leads)
Pin 2 is not used.
E3Z-L66
Through-beam Emitter
Brown
E3Z-B61
E3Z-B66
E3Z-B62
E3Z-B67
E3Z-L63
E3Z-L68
1
Power
indicator
(orange)
Photo-
electric
Sensor
main
Connector Pin Arrangement
2
4
12 to
1
3
24 VDC
circuit
Pins 2 and 4 are not used.
3
Blue
PNP Output
Model*
Operation
mode
Operation
selector
Timing charts
Output circuit
Incident light
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models, Limited reflective Models.
Brown
No incident light
Operation
indicator
(orange)
Output
ON
OFF
12 to 24 VDC
E3Z-T81(K)
E3Z-T86
E3Z-T82
E3Z-T87
E3Z-T81A
E3Z-T86A
E3Z-R81(K)
E3Z-R86
E3Z-D81(K)
E3Z-D86
E3Z-D82(K)
E3Z-D87
E3Z-L81
1
Operation
indicator
L side
(LIGHT ON)
Stability
ON
Light-ON
Dark-ON
indicator
(Green)
ZD
transistor
OFF
(Orange)
Black
Operate
Load
Photo-
4
3
electric
Sensor
main
(e.g., relay)
(Control
output)
Reset
Load
(Relay)
100 mA
max.
(Between blue (3) and black (4) leads)
Blue
circuit
0 V
Incident light
No incident light
Connector Pin Arrangement
Operation
indicator
(orange)
Output
ON
OFF
2
4
D side
(DARK ON)
ON
1
3
transistor
OFF
Operate
Load
Pin 2 is not used.
(e.g., relay)
Reset
(Between blue (3) and black (4) leads)
E3Z-L86
Brown
E3Z-B81
E3Z-B86
E3Z-B82
E3Z-B87
E3Z-L83
Through-beam Emitter
1
Power
indicator
(orange)
Connector Pin Arrangement
Photo-
electric
Sensor
Main
2
4
12 to 24 VDC
1
3
E3Z-L88
Circuit
Blue
Pins 2 and 4 are not used.
3
* Models numbers for Through-beam Sensors (E3Z-T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-T61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
13
E3Z
Plugs (Sensor I/O Connectors)
M8 connector
Pin arrangement
Wire color
Classifi-
cation
Wire
Connector
pin No.
Application
color
2
1
2
3
4
4
Brown
White
Blue
Brown
White
Blue
1
2
3
4
Power supply (+V)
1
3
−
Black
DC
Power supply (0 V)
Output
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Black
Note: Pin 2 is not used.
Nomenclature
Through-beam Models
(Emitter)
E3Z-T@@
E3Z-T@@A (Receiver)
Stability indicator
(green)
Operation indicator
(orange)
Sensitivity adjuster
Retro-reflective Models
E3Z-R@@
E3Z-B@@
Operation selector
Diffuse-reflective Models
E3Z-D@@
Narrow-beam Reflective Models
E3Z-L@@
Limited reflective Models
E3Z-L@@
14
E3Z
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
● Oil-resistant Models
Oil Resistance
• Although the E3Z-@@@K Sensors have oil-resistant specifications,
performance may be affected by certain types of oil. Refer to the
following table.
• E3Z-@@@K Sensors are tested for resistance to the oils given in
the following table. Refer to the information in the table when
deciding which type of oil to use.
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
Kinematic
● Wiring
Test oil clas-
sification
viscosity
(mm2/s)
at 40°C
Product name
Velocity No.3
pH
M8 Metal Connector
• Be sure to connect or disconnect the metal connector after turning
OFF the Sensor.
Lubricant
2.02
• Hold the connector cover to connect or disconnect the metal
connector.
• Secure the connector cover by hand. Do not use any pliers,
otherwise the connector may be damaged.
• The proper tightening torque range is between 0.3 and 0.4 N·m. Be
sure to tighten the connector securely, otherwise the specified
degree of protection may not be maintained or the connector may
be disconnected due to vibration.
Water insolu-
blemachining Yushiron Oil No.2 ac
oil
---
Less than 10
Yushiroken EC50T-3
7 to 9.5
7 to 9.9
7 to 9.2
7 to 9.8
Yushiron Lubic HWC68
Gryton 1700D
Watersoluble
machining oil
---
Yushironken S50N
Note: 1. The E3Z maintained a minimum insulation resistance of 100 MΩ after
it was dipped in all the above oils for 240 hours.
● Mounting
2. When using the Sensors in environments subject to oils other than
those listed above, use the figures for kinematic viscosity and pH from
the table as general guidelines. Additives and other substances
contained in oils may affect the E3Z. Be sure to consider this before
use.
Sensor Mounting
Use M3 screws to mount the sensor and tighten each screw to a
maximum torque of 0.53 N·m.
E3Z-@@@
E39-L104 Mounting Bracket
(sold separately)
15
E3Z
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors
Through-beam*
Pre-wired Models
E3Z-T61(K)
E3Z-T81(K)
E3Z-T61A
E3Z-T81A
E3Z-T62
E3Z-T82
12
Emitter
Power indicator
(orange)
10.8
7.2
20
2.1
3311
2.8
3
Lens
12.7
M12 Pre-wired Connector
(E3Z-T@@-M1J)
Terminal Specifi-
25.4
11
No.
1
cations
+V
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
4
2
---
Two, M3
1
3
0V
4 dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.1 mm), Standard length: 2 m
4
---
3
2
M12×1
Pins 2 and 4 are not used.
M8 Pre-wired Connector
11.2
4.5
(E3Z-T@@K-M3J)
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Operation Indicator (orange)
7.5
Standard length: 0.3 m
2
1
4
Receiver
Operation selector
Sensitivity adjuster
Stability indicator (green)
3
10.8
7.2
M8
20
2.1
3311
* The Emitter cable has two conductors and the
2.8
3
Receiver cable has three conductors.
Lens
12.7
Terminal Specifi-
25.4
11
No.
1
cations
+V
2
---
Two, M3
3
0V
4 dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter:1.1 mm), Standard length: 2 m
4
Output
Pin 2 is not used.
Through-beam*
Connector Models
E3Z-T66
12
Emitter
E3Z-T86
E3Z-T66A
E3Z-T86A
E3Z-T67
Power indicator (orange)
10.8
7.2
20
2.1
2.8
3
Lens
E3Z-T87
12.7
Terminal Specifi-
No.
1
cations
+V
3311
25.4
11
2
---
3
0V
Two, M3
10.4
4
---
M8 connector
Pins 2 and 4 are not used.
9.75
11.2
7.5
4.5
Operation Indicator (orange)
Receiver
Operation
selector
Stability indicator (green)
Sensitivity
adjuster
10.8
7.2
20
2.1
2.8
3
Lens
Terminal Specifi-
12.7
No.
1
cations
+V
31
25.4
11
2
---
Two, M3
3
0V
10.4
4
Output
M8 connector
Pin 2 is not used.
9.75
* Models numbers for Through-beam Sensors (E3Z-T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-T61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
16
E3Z
Retro-reflective Models
Pre-wired Models
E3Z-R61(K)
E3Z-R81(K)
E3Z-D61(K)
E3Z-D81(K)
E3Z-D62(K)
E3Z-D82(K)
E3Z-L61
E3Z-B61
E3Z-B81
E3Z-B62
E3Z-B82
E3Z-L63
E3Z-L83
11.2
7.5
4.5
M12 Pre-wired Connector
(E3Z-@@@-M1J)
Operation Indicator (orange)
4 dia. vinyl-insulated round cable
with 3 conductors,
Standard length: 0.3 m
4
Operation selector
Sensitivity adjuster
1
Stability indicator (green)
3
1100..88
2
20
2.1
3311
E3Z-L81
M12×1
2.8
3
Receiver
Lens 7 dia.
M8 Pre-wired Connector (E3Z-T@@K-M3J)
16.7
4 dia. vinyl-insulated round cable
with 3 conductors,
8
25.4
Standard length: 0.3 m
2
4
Two, M3
Emitter
Lens 7 dia.
1
3
M8
4 dia. vinyl-insulated round cable with 3
conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m
Terminal Specifica-
No.
1
tions
+V
2
---
3
0V
4
Output
Retro-reflective Models
Connector Models
11.2
7.5
4.5
E3Z-R66
E3Z-R86
E3Z-D66
E3Z-D86
E3Z-D67
E3Z-D87
E3Z-L66
E3Z-L86
E3Z-B66
E3Z-B86
E3Z-B67
E3Z-B87
E3Z-L68
E3Z-L88
Operation Indicator (orange)
Operation selector
Sensitivity adjuster
Stability indicator (green)
1100..88
2.1
2200
2.8
3
Receiver
Lens 7 dia.
16.7
8
3311
25.4
Emitter
Lens 7 dia.
10.4
Two, M3
M8 connector
9.75
Terminal Specifica-
No.
1
tions
+V
2
---
3
0V
4
Output
Note: The lens for the E3Z-D@1/D@6/L@@/B@@ is red. The lens for the E3Z-D@2/D@7 is black.
17
E3Z
Accessories (Order Separately)
Slits
Slits
E39-S65A
E39-S65B
E39-S65C
E39-S65D
E39-S65E
E39-S65F
10.4
A
1100..44
20.2
20..2
A
12.7
12.7
3322..22
10
3322..22
0.2-mm-thick
0.2-mm-thick
Model
E39-S65A
E39-S65B
E39-S65C
Size A
0.5 dia.
1.0 dia.
2.0 dia.
Material
Model
E39-S65D
E39-S65E
E39-S65F
Size A
Material
0.5
1.0
2.0
SUS301
stainless
steel
SUS301
stainless
steel
Slits
E39-L44
Slits
E39-L104
1
(Mounting dimensions)
(Mounting dimensions)
7.0
6.7
14°
R20
19.5
14.1
8.7
26.2
23.2
6
4.5
3
17.8
12.4
299
399
366
3
18
20°
21.5
1.8
8.8
10°
2266..66
16.2
31..2
277
Mounting Brackets
Refer to E39-R for details.
Sensor I/O Connectors
Refer to XS2@ and XS3@ for details.
18
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2012.4
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2012 All Right Reserved.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明