E5EN-C3MT-W-500-N [OMRON]
Basic-type Digital Temperature Controller; 基本型数字温度控制器
| 型号： | E5EN-C3MT-W-500-N |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Basic-type Digital Temperature Controller |
| 文件： | 总15页 (文件大小：1122K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Basic-type Digital Temperature Controller
E5AN/E5EN(96 x 96 mm and 48 x 96 mm)
CSM_E5AN_E5EN_DS_E_3_2
New 96 x 96-mm and 48 x 96-mm Basic Temperature Controllers with
Enhanced Functions and Performance.
Improved Indication Accuracy and
Preventive Maintenance Function.
• Indication Accuracy
Thermocouple input: ±±.3% of PV (previous models: ±±.5%)
Pt input: ±±.2% of PV (previous models: ±±.5%)
Analog input: ±±.2% FS (previous models: ±±.5%)
• A PV/SV-status display function can be set to automatically
alternate between displaying the status of the Temperature
Controller (auto/manual, RUN/STOP, and alarms) and the PV or
SV.
96 × 96 mm
E5AN
48 × 96 mm
E5EN
• Preventive maintenance for relays in the Temperature Controller
using a Control Output ON/OFF Counter.
• Three-level display that simultaneously displays the PV, SV, and
MV.
Refer to Safety Precautions for E5@N/E5@N-H.
Refer to Operation for E5@N/E5@N-H for operating
procedures.
• One-touch operation with PF Key that can be assigned to auto/
manual, RUN/STOP, or other functions.
Main I/O Functions
E5AN
E5EN
3-level Display *
Simultaneously displays set items,
Event Inputs
• None
• Two
such as the PV, SV, and MV.
* A 2-level display when shipped from the factory. A
3-level display is activated if parameters are
initialized. For details on the third display level, refer
to the User’s Manual, Basic Type (Cat. No. H156).
Sensor Inputs
4-digit Display
• Universal thermocouple/Pt inputs
(Models with temperature inputs)
• Analog current/voltage inputs
(Models with analog inputs)
• Auto/manual switching
• Temperature Controller
status display
Auxiliary Outputs
• Three
• Simple program function
• Control output ON/OFF
count alarm
Control Output 2
• Voltage output
(for driving SSR)
Indication Accuracy
• Thermocouple input: ±.3% of PV
• Pt input: ±.2% of PV
• PV change rate alarm
• Models also available with
RS-485 or RS-232C
communications
•
Long-life relay
• Analog input: ±.2% FS
output (hybrid)
Sampling Period
• 25± ms
Control Output 1
• Relay output
• Voltage output (for driving SSR)
• Current output
PF Key
(Programmable function key)
This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions
and other information required for operation before attempting to use the product.
E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156)
E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers Communications Manual Basic Type (Cat. No. H158)
1
E5AN/E5EN
Lineup
3 auxiliary outputs
1 control output
2 control outputs
1 control output
2 control outputs
Temperature input
Analog input
3 auxiliary outputs
3 auxiliary outputs
3 auxiliary outputs
E5AN/E5EN
Basic Type
Terminal block
Note: Models with one control output or two control outputs can be used for heating/cooling control.
Model Number Structure
Model Number Legend
Controllers
Option Units
E53-@
E5AN/E5EN-@3@M@@-@-500-N
1
9
1 2 3 4 5 6
7
8
1. Control Output 1
1. Function
R: Relay output
Q: Voltage output (for driving SSR)
C: Current output
EN01: RS-232C communications
EN03: RS-485 communications
AKB: Event input
2. Auxiliary Outputs
3: Three outputs
3. Heater Burnout/SSR Failure, Control Output 2, or External
Power Supply for ES1B
Blank: None
Q: Control output 2 (voltage output for driving SSR)
Y: Long-life relay output (hybrid)
H: Heater burnout/SSR failure/Heater overcurrent detection (CT1)
HH: Heater burnout/SSR failure/Heater overcurrent detection
(CT2)
P: Power supply for sensor
4. Option
M: Option Unit can be mounted.
5. Input Type
T: Universal thermocouple/platinum resistance thermometer input
L: Analog current/voltage input
6. Power Supply Voltage
Blank: 100 to 240 VAC
D: 24 VAC/VDC
7. Case Color
Blank: Black
W: Silver
8. Terminal Cover
-500: With terminal cover
9. Version
N: Available only to models released after January 2008.
2
E5AN/E5EN
Ordering Information
E5AN
Controllers with Terminal Blocks
Functions
Power
supply
voltage
Case
color
Auxiliary
outputs
Size
Input type
Control output 1
Model
Heater Power supply Control
burnout
for Sensor output 2
Relay output
E5AN-R3MT-500-N
E5AN-Q3MT-500-N
Voltage output
(for driving SSR)
Current output
Relay output
E5AN-C3MT-500-N
E5AN-R3HMT-500-N
1
1
2
2
Voltage output
(for driving SSR)
E5AN-Q3HMT-500-N
E5AN-R3HHMT-500-N
E5AN-Q3HHMT-500-N
Relay output
Voltage output
(for driving SSR)
Thermocouple
or
Resistance
thermometer
Voltage
output
Relay output
E5AN-R3QMT-500-N
E5AN-Q3QMT-500-N
3
Voltage output
(for driving SSR)
Voltage
output
Voltage
output
Current output
E5AN-C3QMT-500-N
E5AN-R3YMT-500-N
E5AN-Q3YMT-500-N
100 to
240 VAC
Relay output
Long-life
relay
output
Voltage output
(for driving SSR)
Current output
Relay output
E5AN-C3YMT-500-N
E5AN-R3PMT-500-N
Sensor Power
Sensor Power
Black
Voltage output
(for driving SSR)
E5AN-Q3PMT-500-N
E5AN-R3ML-500-N
E5AN-Q3ML-500-N
Relay output
Voltage output
(for driving SSR)
1/4 DIN
96 × 96 × 78
(W × H × D)
Current output
Relay output
E5AN-C3ML-500-N
E5AN-R3HML-500-N
Analog
(current/voltage)
1
1
3
Voltage output
(for driving SSR)
E5AN-Q3HML-500-N
Long-life
relay
output
Voltage output
(for driving SSR)
E5AN-Q3YML-500-N
Relay output
E5AN-R3MTD-500-N
E5AN-Q3MTD-500-N
Voltage output
(for driving SSR)
Current output
Relay output
E5AN-C3MTD-500-N
E5AN-R3HMTD-500-N
Thermocouple
24 VAC/ or
1
1
2
2
3
VDC
Resistance
thermometer
Voltage output
(for driving SSR)
E5AN-Q3HMTD-500-N
E5AN-R3HHMTD-500-N
E5AN-Q3HHMTD-500-N
E5AN-R3MT-W-500-N
E5AN-Q3MT-W-500-N
Relay output
Voltage output
(for driving SSR)
Relay output
Voltage output
(for driving SSR)
100 to
240 VAC
Current output
Relay output
E5AN-C3MT-W-500-N
E5AN-R3HMT-W-500-N
Thermocouple
or
Resistance
thermometer
1
1
Silver
3
Voltage output
(for driving SSR)
E5AN-Q3HMT-W-500-N
E5AN-R3MTD-W-500-N
E5AN-Q3MTD-W-500-N
E5AN-C3MTD-W-500-N
Relay output
24 VAC/
VDC
Voltage output
(for driving SSR)
Current output
Note: Models with analog inputs do not have temperature unit indicators.
3
E5AN/E5EN
E5EN
Controllers with Terminal Blocks
Functions
Power
supply
voltage
Case
color
Auxiliary
outputs
Size
Input type
Control output 1
Model
Heater Power supply
Control
output 2
burnout
for Sensor
Relay output
E5EN-R3MT-500-N
E5EN-Q3MT-500-N
Voltage output
(for driving SSR)
Current output
Relay output
E5EN-C3MT-500-N
E5EN-R3HMT-500-N
1
1
2
2
Voltage output
(for driving SSR)
E5EN-Q3HMT-500-N
E5EN-R3HHMT-500-N
E5EN-Q3HHMT-500-N
Relay output
Voltage output
(for driving SSR)
Voltage
output
Thermocouple
or
Resistance
thermometer
Relay output
E5EN-R3QMT-500-N
E5EN-Q3QMT-500-N
E5EN-C3QMT-500-N
E5EN-R3YMT-500-N
E5EN-Q3YMT-500-N
3
Voltage output
(for driving SSR)
Voltage
output
Voltage
output
Current output
Relay output
100 to
240 VAC
Long-life
relay output
Voltage output
(for driving SSR)
Long-life
relay output
Long-life
relay output
Current output
Relay output
E5EN-C3YMT-500-N
E5EN-R3PMT-500-N
E5EN-Q3PMT-500-N
E5EN-R3ML-500-N
E5EN-Q3ML-500-N
Black
Sensor Power
Sensor Power
Voltage output
(for driving SSR)
Relay output
Voltage output
(for driving SSR)
1/8 DIN
48 × 96 × 78
(W × H × D)
Current output
Relay output
E5EN-C3ML-500-N
E5EN-R3HML-500-N
E5EN-Q3HML-500-N
Analog
(current/voltage)
3
1
1
Voltage output
(for driving SSR)
Long-life
relay output
E5EN-Q3YML-500-N
E5EN-R3MTD-500-N
E5EN-Q3MTD-500-N
Relay output
Voltage output
(for driving SSR)
Current output
Relay output
E5EN-C3MTD-500-N
E5EN-R3HMTD-500-N
Thermocouple
24 VAC/ or
1
1
2
2
3
VDC
Resistance
thermometer
Voltage output
(for driving SSR)
E5EN-Q3HMTD-500-N
E5EN-R3HHMTD-500-N
E5EN-Q3HHMTD-500-N
E5EN-R3MT-W-500-N
E5EN-Q3MT-W-500-N
Relay output
Voltage output
(for driving SSR)
Relay output
Voltage output
(for driving SSR)
100 to
240 VAC
Current output
Relay output
E5EN-C3MT-W-500-N
E5EN-R3HMT-W-500-N
Thermocouple
or
Resistance
thermometer
1
1
Silver
3
Voltage output
(for driving SSR)
E5EN-Q3HMT-W-500-N
E5EN-R3MTD-W-500-N
E5EN-Q3MTD-W-500-N
E5EN-C3MTD-W-500-N
Relay output
24 VAC/
VDC
Voltage output
(for driving SSR)
Current output
Note: Models with analog inputs do not have temperature unit indicators.
4
E5AN/E5EN
Option Units
Name
Function
RS-232C communications
RS-485 communications
Event inputs
Model
E53-EN01
E53-EN03
E53-AKB
Communications Unit
Event Input Unit
Accessories (Order Separately)
USB-Serial Conversion Cable
Current Transformers (CTs)
Model
Hole diameter
5.8 dia.
Model
E58-CIFQ1
E54-CT1
E54-CT3
12.0 dia.
Terminal Cover
CX-Thermo Support Software
Connectable models
Model
E5AN
E5EN
Model
E53-COV16
EST2-2C-MV4
Note: The Terminal Cover comes with the E5CN-@@@-500 models.
Waterproof Packing
Connectable models
Model
E5AN
E5EN
Y92S-P4
Y92S-P5
Note: The Waterproof Packing is included with the Controller.
5
E5AN/E5EN
Specifications
Ratings
No D in model number: 100 to 240 VAC, 50/60 Hz
D in model number: 24 VAC, 50/60 Hz; 24 VDC
Power supply voltage
Operating voltage range
85% to 110% of rated supply voltage
Power
consumption
100 to 240 VAC: 10 VA
24 VAC/VDC: 5.5 VA (24 VAC)/4 W (24 VDC)
Models with temperature inputs
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II
Platinum resistance thermometer: Pt100 or JPt100
Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C
Voltage input: 0 to 50 mV
Sensor input
Models with analog inputs
Current input: 4 to 20 mA or 0 to 20 mA
Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V
Input impedance
Control method
Current input: 150 Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB.)
ON/OFF control or 2-PID control (with auto-tuning)
SPST-NO, 250 VAC, 5 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V,
10 mA
Relay output
Voltage output
(for driving SSR)
Output voltage: 12 VDC 15% (PNP), max. load current: 40 mA,
With short-circuit protection circuit: Max. load current of 21 mA for control output 2
Control
output
Current output
4 to 20 mA DC/0 to 20 mA DC, load: 600 Ω max., resolution: approx. 10,000
SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 1,000,000 operations, load power supply voltage: 75
to 250 VAC (DC loads cannot be connected.), minimum applicable load: 5 V, 10 mA, leakage current: 5 mA
max. (250 VAC, 60 Hz)
Long-life relay
output
Number of outputs
3
Auxiliary
output
Output
specifications
Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable
load: 5 V, 10 mA
Number of inputs
2
Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.
Event
input
External contact
input specifications
Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.
Current flow: Approx. 7 mA per contact
External power supply for ES1B 12 VDC 10%, 20 mA, short-circuit protection circuit provided
Setting method
Digital setting using front panel keys
11-segment digital display and individual indicators (7-segments displays also possible)
Character height: E5AN: PV: 15.8 mm, SV: 9.5 mm, MV: 6.8 mm; E5EN: PV: 11.8 mm, SV: 8.1 mm, MV:
5.8 mm
Indication method
Content of 3-level display: PV/SV/MV, PV/SV/multi-SP, or soak time remain *
Number of digits: 4 for PV, SV, and MV
Up to four set points (SP0 to SP3) can be saved and selected using event inputs, key operations, or serial
communications.
Multi SP
Bank switching
Not supported.
Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout
detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop,
protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, logic
operations, PV/SV status display, simple program, automatic cooling coefficient adjustment
Other functions
Ambient operating temperature −10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C
Ambient operating humidity
Storage temperature
25% to 85%
−25 to 65°C (with no condensation or icing)
* A 2-level display when shipped from the factory. A 3-level display is activated if parameters are initialized. For details on the third display level,
refer to the User’s Manual, Basic Type (Cat. No. H156).
6
E5AN/E5EN
Input Ranges
Thermocouple/Platinum Resistance Thermometer (Universal inputs)
Input
type
Platinum resistance
Infrared temperature Analog
Thermocouple
thermometer
sensor
input
115
140
to
260
°C
60 to
PL
II
0 to
50 mV
10 to
70°C
to
165
°C
120
Name
Pt100
JPt100
K
J
T
E
L
U
N
R
S
B
W
°C
2300
2300
1800
1800
1700
1600
1500
1400
1300
1200
1100
1000
900
1700 1700
1300
1300
1300
Usable
in the
following
ranges
by
scaling:
−1999 to
9999 or
−199.9
to 999.9
850
850
850
800
700
600
600
500.0
500.0
500.0
500
400.0 400 400.0
400 400.0
400
260
300
120
0
165
0
200
100.0
0.0
100.0
90
0
100
100
0
0.0
0
0
0
0
0
−100.0
−200.0
−20.0 −100 −20.0
−100
−200 −199.9
−199.9
−200
−200 −199.9 −200
−200 −199.9 −200
Setting
number
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 24 25
19
20
21
22
23
Shaded settings are the default settings.
The applicable standards for the input types are as follows:
K, J, T, E, N, R, S, B: JIS C 1602-1995, IEC 584-1
L: Fe-CuNi, DIN 43710-1985
JPt100: JIS C 1604-1989, JIS C 1606-1989
Pt100: JIS C 1604-1997, IEC 751
U: Cu-CuNi, DIN 43710-1985
PL II: According to Platinel II electromotive force charts from BASF (previously
Engelhard)
W: W5Re/W26Re, ASTM E988-1990
Models with Analog Inputs
Input type
Current
Voltage
Input specification 4 to 20mA 0 to 20 mA
1 to 5 V
0 to 5 V
0 to 10 V
Usable in the following ranges by scaling:
−1999 to 9999, −199.9 to 999.9, −19.99 to 99.99 or −1.999 to 9.999
Setting range
Setting number
0
1
2
3
4
Shaded settings are the default settings.
7
E5AN/E5EN
Alarm Outputs
Each alarm can be independently set to one of the following 13 alarm types. The default is 2: Upper limit.
Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified.
Note: For models with heater burnout, SSR failure, and heater overcurrent detection, alarm 1 will be an OR output of the alarm selected from the
following alarm types and the alarms for heater burnout, SSR failure, and heater overcurrent. To output only a heater burnout alarm, SSR
failure alarm, and heater overcurrent alarm for alarm 1, set the alarm type to 0 (i.e., no alarm function).
Alarm output operation
Set value
Alarm type
Alarm function OFF
Description of function
When alarm value When alarm value
X is positive
X is negative
0
Output OFF
No alarm
L
H
X
Set the deviation in the set point by setting the alarm
upper limit (H) and alarm lower limit (L).
ON
OFF
1 *1
2
Upper- and lower-limit
Upper-limit
*2
SP
X
Set the upward deviation in the set point by setting
the alarm value (X).
ON
OFF
ON
OFF
SP
SP
X
X
ON
OFF
ON
OFF
Set the downward deviation in the set point by setting
the alarm value (X).
3
Lower-limit
SP
SP
L
H
H
Set the deviation in the set point by setting the alarm
upper limit (H) and alarm lower limit (L).
ON
OFF
4 *1
Upper- and lower-limit range
*3
SP
L
ON
OFF
Upper- and lower-limit with
standby sequence
A standby sequence is added to the upper- and
lower-limit alarm (1). *6
5 *1
*4
SP
*5
X
X
A standby sequence is added to the upper-limit alarm
(2). *6
ON
OFF
ON
OFF
6
Upper-limit with standby sequence
Lower-limit with standby sequence
Absolute-value upper-limit
SP
SP
X
X
ON
OFF
A standby sequence is added to the lower-limit alarm
(3). *6
ON
OFF
7
SP
X
SP
X
ON
OFF
The alarm will turn ON if the process value is larger
than the alarm value (X) regardless of the set point.
ON
OFF
8
0
0
0
0
0
X
X
X
X
X
ON
OFF
The alarm will turn ON if the process value is smaller
than the alarm value (X) regardless of the set point.
ON
OFF
9
Absolute-value lower-limit
0
Absolute-value upper-limit with
standby sequence
ON
OFF
A standby sequence is added to the absolute-value
upper-limit alarm (8). *6
ON
OFF
10
11
0
0
X
Absolute-value lower-limit with
standby sequence
A standby sequence is added to the absolute-value
lower-limit alarm (9). *6
ON
OFF
ON
OFF
12
13
LBA (alarm 1 type only)
PV change rate alarm
---
---
*7
*8
*1. With set values 1, 4 and 5, the upper and lower limit values can
be set independently for each alarm type, and are expressed as
“L” and “H.”
*5. Set value: 5, Upper- and lower-limit with standby sequence
Always OFF when the upper-limit and lower-limit hysteresis
overlaps.
*6. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature
Controllers User's Manual Basic Type (Cat. No. H156) for
information on the operation of the standby sequence.
*7. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature
Controllers User's Manual Basic Type (Cat. No. H156) for
information on the loop burnout alarm (LBA).
*2. Set value: 1, Upper- and lower-limit alarm
Case 2
Case 1
Case 3 (Always ON)
H < 0, L < 0
H
SP
L
SP L
H
L
H SP
H < 0, L > 0
⏐H⏐ ≥ ⏐L⏐
H < 0, L > 0
⏐H⏐ < ⏐L⏐
H > 0, L < 0
⏐H⏐ > ⏐L⏐
H
L SP
*8. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature
Controllers User's Manual Basic Type (Cat. No. H156) for
information on the PV change rate alarm.
H > 0, L < 0
⏐H⏐ ≤ ⏐L⏐
SPH
L
*3. Set value: 4, Upper- and lower-limit range
Case 3 (Always OFF)
Case 1
Case 2
H < 0, L < 0
H
SP
L
L
H SP
SP L
H
H < 0, L > 0
H < 0, L > 0
H > 0, L < 0
⏐H⏐ ≥ ⏐L⏐
H
L SP
⏐H⏐ < ⏐L⏐
⏐H⏐ > ⏐L⏐
H > 0, L < 0
⏐H⏐ ≤ ⏐L⏐
L
SP H
*4. Set value: 5, Upper- and lower-limit with standby sequence
For Upper- and Lower-Limit Alarm Described Above
• Case 1 and 2
Always OFF when the upper-limit and lower-limit hysteresis
overlaps.
• Case 3: Always OFF
8
E5AN/E5EN
Characteristics
Thermocouple: ( 0.3% of indicated value or 1°C, whichever is greater) 1 digit max. *1
Platinum resistance thermometer: ( 0.2% of indicated value or 0.8°C, whichever is greater) 1 digit max.
Analog input: 0.2% FS 1 digit max.
Indication accuracy
CT input: 5% FS 1 digit max.
Transfer output accuracy 0.3% FS max.
Influence of temperature Thermocouple input (R, S, B, W, PL II): ( 1% of PV or 10°C, whichever is greater) 1 digit max.
*2
Other thermocouple input: ( 1% of PV or 4°C, whichever is greater) 1 digit max. *3
Platinum resistance thermometer: ( 1% of PV or 2°C, whichever is greater) 1 digit max.
Analog input: ( 1%FS) 1 digit max.
Influence of voltage *2
Input sampling period
250 ms
Models with thermocouple/platinum resistance thermometer input (universal input): 0.1 to 999.9 EU (in units of 0.1
Hysteresis
EU) *4
Models with analog input: 0.01 to 99.99% FS (in units of 0.01% FS)
Models with thermocouple/platinum resistance thermometer input (universal input): 0.1 to 999.9 EU (in units of 0.1
Proportional band (P)
EU) *4
Models with analog input: 0.1 to 999.9% FS (in units of 0.1% FS)
Integral time (I)
0 to 3999 s (in units of 1 s)
Derivative time (D)
Control period
0 to 3999 s (in units of 1 s) *5
0.5, 1 to 99 s (in units of 1 s)
Manual reset value
Alarm setting range
0.0 to 100.0% (in units of 0.1%)
−1999 to 9999 (decimal point position depends on input type)
Affect of signal source
resistance
Thermocouple: 0.1°C/Ω max. (100 Ω max.)
Platinum resistance thermometer: 0.1°C/Ω max. (10 Ω max.)
Insulation resistance
20 MΩ min. (at 500 VDC)
Dielectric strength
2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)
Malfunction 10 to 55 Hz, 20 m/s2 for 10 min each in X, Y, and Z directions
Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions
Malfunction 100 m/s2, 3 times each in X, Y, and Z directions
Vibration
resistance
Shock
resistance
Destruction 300 m/s2, 3 times each in X, Y, and Z directions
E5AN
E5EN
Controller: Approx. 310 g, Mounting Bracket: Approx. 100 g
Controller: Approx. 260 g, Mounting Bracket: Approx. 100 g
Front panel: IP66, Rear case: IP20, Terminals: IP00
Non-volatile memory (number of writes: 1,000,000 times)
CX-Thermo version 4.0 or higher
Weight
Degree of protection
Memory protection
Setup Tool
Provided on the bottom of the E5AN and E5EN.
An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5AN and E5EN *6
Setup Tool port
Approved
UL 61010-1, CSA C22.2 No. 1010-1
standards
Standards
Conformed
EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II, Lloyd's standards *7
standards
EMI:
EN 61326
Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A
Noise Terminal Voltage:
EMS:
ESD Immunity:
Electromagnetic Field Immunity:
Burst Noise Immunity:
Conducted Disturbance Immunity:
Surge Immunity:
EN 55011 Group 1, class A
EN 61326
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-6
EN 61000-4-5
EN 61000-4-8
EN 61000-4-11
EMC
Power Frequency Magnetic Field Immunity:
Voltage Dip/Interrupting Immunity:
*1. The indication accuracy of K thermocouples in the −200 to 1300°C range, T and N thermocouples at a temperature of −100°C max., and U
and L thermocouples at any temperatures is 2°C 1 digit max. The indication accuracy of the B thermocouple at a temperature of 400°C max.
is not specified. The indication accuracy of B thermocouples in the 400 to 800°C range is 3°C max. The indication accuracy of the R and S
thermocouples at a temperature of 200°C max. is 3°C 1 digit max. The indication accuracy of W thermocouples is 0.3 of PV or 3°C,
whichever is greater, 1 digit max. The indication accuracy of PL II thermocouples is 0.3 of PV or 2°C, whichever is greater, 1 digit max.
*2. Ambient temperature: −10°C to 23°C to 55°, Voltage range: −15% to 10% of rated voltage
*3. K thermocouple at −100°C max.: 10°C max.
*4. “EU” stands for Engineering Unit and is used as the unit after scaling. For a temperature sensor, the EU is °C or °F.
*5. When robust tuning (RT) is ON, the differential time is 0.0 to 999.9 (in units of 0.1 s).
*6. External communications (RS-232C or RS-485) and cable communications for the Setup Tool can be used at the same time.
*7. Refer to information on maritime standards in Safety Precautions for E5@N/E5@N-H for compliance with Lloyd's Standards.
9
E5AN/E5EN
USB-Serial Conversion Cable
Current Transformer (Order Separately)
Ratings
Applicable OS
Windows 2000, XP, or Vista
Applicable software
CX-Thermo version 4 or higher
Dielectric strength
1,000 VAC for 1 min
E5AN/E5EN/E5CN/E5CN-U/E5AN-
H/E5EN-H/E5CN-H/E5GN
Vibration resistance 50 Hz, 98 m/s2
Applicable models
E54-CT1: Approx. 11.5 g,
E54-CT3: Approx. 50 g
Weight
USB interface standard
DTE speed
Conforms to USB Specification 1.1.
38400 bps
Accessories
(E54-CT3 only)
Armatures (2)
Plugs (2)
Computer: USB (type A plug)
Temperature Controller: Setup Tool
port (on bottom of Controller)
Connector specifications
Heater Burnout Alarms, SSR Failure
Alarms, and Heater Overcurrent Alarms
Bus power (Supplied from USB host
controller.)
Power supply
Models with detection for single-
Power supply voltage
Current consumption
5 VDC
70 mA
phase heaters: One input
CT input (for heater
Models with detection for single-
current detection)
phase or three-phase heaters: Two
Ambient operating
temperature
0 to 55°C (with no condensation or
icing)
inputs
Maximum heater current
50 A AC
Ambient operating humidity 10% to 80%
Input current indication
accuracy
−20 to 60°C (with no condensation
or icing)
5% FS 1 digit max.
Storage temperature
Heater burnout alarm
setting range *1
SSR failure alarm setting 0.1 to 49.9 A (in units of 0.1 A)
range *2 Minimum detection OFF time: 100 ms
0.1 to 49.9 A (in units of 0.1 A)
Minimum detection ON time: 100 ms
Storage humidity
Altitude
10% to 80%
2,000 m max.
Approx. 100 g
Weight
Note: A driver must be installed in the personal computer. Refer to
installation information in the operation manual for the
Conversion Cable.
Heater overcurrent alarm 0.1 to 49.9 A (in units of 0.1 A)
setting range *3 Minimum detection ON time: 100 ms
*1. For heater burnout alarms, the heater current will be measured
when the control output is ON, and the output assigned to the
alarm 1 function will turn ON if the heater current is lower than the
set value (i.e., heater burnout detection current value).
*2. For SSR failure alarms, the heater current will be measured when
the control output is OFF, and the output assigned to the alarm 1
function will turn ON if the heater current is higher than the set
value (i.e., SSR failure detection current value).
Communications Specifications
Transmission line
connection method
RS-485: Multipoint
RS-232C: Point-to-point
RS-485 (two-wire, half duplex) or RS-
232C
Communications
*3. For heater overcurrent alarms, the heater current will be
measured when the control output is ON, and the output assigned
to the alarm 1 function will turn ON if the heater current is higher
than the set value (i.e., heater overcurrent detection current
value).
Synchronization method Start-stop synchronization
Protocol
CompoWay/F, SYSWAY, or Modbus
1200, 2400, 4800, 9600, 19200, 38400,
or 57600 bps
Baud rate
Transmission code
Data bit length *
Stop bit length *
ASCII
Electrical Life Expectancy Curve for
Relays (Reference Values)
7 or 8 bits
1 or 2 bits
Vertical parity (none, even, odd)
Frame check sequence (FCS) with
SYSWAY
500
300
Error detection
Block check character (BCC) with
CompoWay/F or CRC-16 Modbus
E5AN/E5EN
250 VAC, 30 VDC
100
(resistive load)
cosφ = 1
Flow control
Interface
None
50
30
RS-485, RS-232C
None
Retry function
Communications buffer 217 bytes
10
Communications
0 to 99 ms
Default: 20 ms
5
3
response wait time
* The baud rate, data bit length, stop bit length, and vertical parity can
be individually set using the Communications Setting Level.
1
0
1
2
3
4
5
6
Switching current (A)
Note: Do not connect a DC load to a Controller with a Long-life Relay
Output.
10
E5AN/E5EN
External Connections
• A voltage output (control output 1, for driving SSR) is not electrically insulated from the internal circuits. When using a grounding thermocouple,
do not connect any of the control output terminals to ground. If the control output terminals are connected to ground, errors will occur in the
measured temperature values as a result of leakage current.
The voltage output (control output 2, for driving SSR) has basic insulation provided for the internal circuit.
• Consult with your OMRON representative before using the external power supply for the ES1B for any other purpose.
Controllers
Option Units
The E5@N-@@@T@ is set for a K-type thermocouple
(input type = 5) by default. An input error (s.err) will
occur if the input type setting does not agree with the
temperature sensor. Check the input type.
• 100 to 240 VAC
Communications
• 24 VAC/VDC (no polarity)
E53-EN01
RS-232C
E53-EN03
RS-485
E53-AKB
Event inputs
Control output 1
Relay output
250 VAC, 5A
(resistive load)
Voltage output
(for driving SSR)
12 VDC, 40 mA
Current output
0 to 20 mA DC
4 to 20 mA DC
Load: 600 Ω max.
11
12
13
SD
RD
SG
11
12
13
B (+)
A (−)
11
EV2
Event Inputs
12
EV
1
2
3
4
5
6
7
8
11
12
13
14
15
16
17
18
19
20
Input power supply
DO NOT USE 13
EV2
CT1/CT2
EV1
CT1/CT2 Control Output 2
Control output 1
Auxiliary output 3
Auxiliary output 2
Auxiliary output 1
External Power Supply
CT1
Control output 2
External power supply
12 VDC, 20 mA
CT2
DO NOT
USE
DO NOT
Control output 2
Voltage output
USE
DO NOT
USE
(for driving SSR)
A
B
DO NOT
USE
DO NOT
USE
12 VDC, 21 mA
mA
Long-life relay output
250 VAC, 3 A
(resistive load)
9
A heater burnout alarm, heater short alarm,
heater overcurrent alarm, or input alarm is
sent to the output to which the alarm 1
function is assigned.
V
DO NOT
B
10
USE
TC/Pt
universal-input
Analog input
Auxiliary output
1, 2, 3
Relay outputs
250 VAC, 3 A
(resistive load)
11
E5AN/E5EN
Nomenclature
E5AN
E5EN
Temperature unit
Operation indicators
SUB1 SUB2
HA SUB3
SUB1
SUB2
SUB3
HA
PV
No.1 display
PV
Temperature unit
Operation indicators
No.1 display
SV
SV
No. 2 display
No. 3 display
No.2 display
OUT1
OUT2
STOP
OUT1 STOP
OUT2 CMW
MV
MV
No.3 display
Operation indicators
MANU
CMW MANU
Up Key
Programmable
Function Key/
Auto/Manual Key
Mode Key
Level Key
PF
Up Key
A/M
Programmable
Function Key/
Auto/Manual Key
Down Key
E5EN
E5AN
Down Key
Level Key
Mode Key
* A 2-level display when shipped from the factory. A 3-level display is activated if parameters are initialized. For details on the third display level,
refer to the User’s Manual, Basic Type (Cat. No. H156).
Dimensions
E5AN
(Unit: mm)
Mounted Separately
Group Mounted
(96 × number of units − 3.5)+1.0
92+0.8
0
0
6
79.2
2
92+0.8
0
Group mounting does not allow waterproofing.
112
91
96 × 96
120 min.
•Recommended panel thickness is 1 to
8 mm.
•Group mounting is not possible in the
vertical direction. (Maintain the specified
mounting space between Controllers.)
•To mount the Controller so that it is
waterproof, insert the waterproof packing
onto the Controller.
•When two or more Controllers are
mounted, make sure that the surrounding
temperature does not exceed the
allowable operating temperature specified
in the specifications.
92+0.8
0
Terminal Cover
(E53-COV16)
(Accessory)
Waterproof
Packing
Mounting Bracket
(Accessory)
(Accessory)
Crimp terminal size: M3.5
12
E5AN/E5EN
E5EN
Mounted Separately
Group Mounted
(48 × number of units − 2.5)+1.0
0
6
79.2
45+0.6
0
48
2
92+0.8
0
112
96
91
Group mounting does not
allow waterproofing.
120 min.
92+0.8
0
Terminal Cover
(E53-COV16)
(Accessory)
Waterproof
Packing
Mounting Bracket
(Accessory)
(Accessory)
Crimp terminal size: M3.5
•
•
Recommended panel thickness is 1 to 8 mm.
Group mounting is not possible in the vertical direction.
(Maintain the specified mounting space between
Controllers.)
•
•
To mount the Controller so that it is waterproof, insert the
waterproof packing onto the Controller.
When two or more Controllers are mounted, make sure
that the surrounding temperature does not exceed the
allowable operating temperature specified in the
specifications.
Accessories (Order Separately)
USB-Serial Conversion Cable
E58-CIFQ1
(2,100)
1,765
250
LED (SD)
USB connector (type A plug)
Serial connector
LED (RD)
Terminal Covers
E53-COV16 (Six Covers provided.)
1.2 3.2
10
44.8
13
E5AN/E5EN
Waterproof Packing
Y92S-P4 (for DIN 96 × 96)
Y92S-P5 (for DIN 48 × 96)
Order the Waterproof Packing separately if it becomes lost or
damaged.
The Waterproof Packing can be used to achieve an IP66 degree of
protection.
(Deterioration, shrinking, or hardening of the waterproof packing may
occur depending on the operating environment. Therefore, periodic
replacement is recommended to ensure the level of waterproofing
specified in IP66. The time for periodic replacement depends on the
operating environment. Be sure to confirm this point at your site.
Consider one year a rough standard. OMRON shall not be liable for
the level of water resistance if the customer does not perform periodic
replacement.)
The Waterproof Packing does not need to be attached if a waterproof
structure is not required.
Current Transformers
E54-CT1
E54-CT1
21
2.8
Thru-current (Io) vs. Output Voltage
(Eo) (Reference Values)
Maximum continuous heater current: 50 A (50/60 Hz)
Number of windings: 400 2
15
5.8 dia.
7.5
Winding resistance: 18 2 Ω
25
3
100 V
10.5
50 Hz
∞
10
40
Distortion
factor 10%
1 kΩ
Two, 3.5 dia.
1
3%
10
1%
100 mV
30
100 Ω
10
1
E54-CT3
RL = 10 Ω
2.36 dia.
30
12 dia.
100 µV
9
10
1
10
100 mA
1
10
100 1,000 A
Thru-current (Io) A (r.m.s.)
40 × 40
E54-CT3
Thru-current (Io) vs. Output Voltage
(Eo) (Reference Values)
Two, M3 (depth: 4)
15
Maximum continuous heater current: 120 A (50/60 Hz)
(Maximum continuous heater current for an OMRON
Temperature Controller is 50 A.)
30
Number of windings: 400 2
Winding resistance: 8 0.8 Ω
E54-CT3 Accessory
• Armature
100 V
50 Hz
Distor-
Connection Example
tion
∞
factor
10%
10
1 kΩ
Armature
Plug
500 Ω
Approx. 3 dia.
3%
1%
1
100 mV
10
Lead
100 Ω
50 Ω
18
RL = 10 Ω
• Plug
1
Approx. 6 dia.
100 µV
10
1
(22)
10
100 mA
1
10
100 1,000 A
Thru-current (Io) A (r.m.s.)
14
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
·
·
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
·
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2009.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2009 All Right Reserved.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明