G2RL-2DC12 [OMRON]
Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 12VDC (Coil), 400mW (Coil), 8A (Contact), 300VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
| 型号： | G2RL-2DC12 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 12VDC (Coil), 400mW (Coil), 8A (Contact), 300VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总6页 (文件大小：508K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GPCB2ReRlayL
A Power Relay with Various Models
• High-sensitivity (250 mW) and High-capacity (16 A) versions.
• Designed for cooking and HVAC controls: blower motor,
damper, active air purification, duct flow boost fans, etc.
• Conforms to VDE (EN61810-1). UL recognized/ CSA certiified
• Meets EN60335-1 requirements for household products.
• Clearance and creepage distance: 10 mm/10 mm.
• Tracking resistance: CTI>250
• Coil Insulation system: Class F.
• RoHS Compliant
Ordering Information
Contact form
SPDT DPST-NO
G2RL-1 G2RL-2A
Enclosure
Classification
ratings
SPST-NO
G2RL-1A
DPDT
G2RL-2
General-purpose
High-capacity
Flux protection
Fully sealed
G2RL-1A4
G2RL-1A-E
G2RL-1A4-E
G2RL-1A-H
G2RL-14
G2RL-2A4
G2RL-24
Flux protection
Fully sealed
G2RL-1-E
G2RL-14-E
G2RL-1-H
---
---
---
---
---
---
High-sensitivity
Flux protection
Note: When ordering, add the rated coil voltage to the model number.
Example: G2RL-1A DC12
Rated coil voltage
Model Number Legend
G2RL-@@@-@
1
2
3
4
1. Number of Poles
3. Enclosure Ratings
1:
2:
1 pole
2 poles
None:Flux protection
4: Fully sealed
2. Contact Form
4. Classification
None: @PDT
None:General purpose
A:
@PST-NO
E:
H:
High capacity (1 pole)
High sensitivity (1 pole)
Specifications
■ Coils Ratings for General-purpose and High-capacity Models
Rated voltage
5 VDC
80.0 mA
62.5 Ω
12 VDC
33.3 mA
360 Ω
24 VDC
16.7 mA
1,440 Ω
48 VDC
8.96 mA
5,358 Ω
Rated current
Coil resistance
Must operate voltage
Must release voltage
Max. voltage
70% max. of the rated voltage
10% min. of the rated voltage
180% of rated voltage (at 23°C)
Approx. 400 mW
Power consumption
Approx. 430 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of 10%.
PCB Relay G2RL
221
■ Coils Ratings for High-sensitivity Models
Rated voltage
5 VDC
12 VDC
20.8 mA
576 Ω
24 VDC
10.42 mA
2,304 Ω
Rated current
50.0 mA
Coil resistance
100 Ω
Must operate voltage
Must release voltage
Max. voltage
75% max. of the rated voltage
10% min. of the rated voltage
180% of rated voltage (at 23°C)
Power consumption
Approx. 250 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of 10%.
■ Contact Ratings
Item
Number of poles
Contact material
Load
General-purpose Models
High-capacity Models
1 pole
High-sensitivity Models
1 pole
2 poles
1 pole
Ag Alloy (Cd free)
Resistive load (cosφ=1)
Rated load
12 A at 250 VAC
12 A at 24 VDC
(See note.)
8 A at 250 VAC
8 A at 30 VDC
(See note.)
16 A at 250 VAC
16 A at 24 VDC
(See note.)
10 A at 250 VAC
10 A at 24 VDC
(See note.)
Rated carry current
12 A (See note.)
8 A (70°C)/5 A (85°C)
(See note.)
16 A (See note.)
10 A (See note.)
Max. switching voltage 440 VAC, 300 VDC
Max. switching current 12 A
8 A
16 A
10 A
Max. switching power
3,000 VA (4,000 VA)
2,000 VA
4,000 VA
2,500 VA
Note: Contact your OMRON representative for the ratings on fully sealed models.
■ Characteristics
Item
General-purpose
(High-capacity) Models
General-purpose Models
2 pole
High-sensitivity Models
Number of poles
1 pole
1 pole
Contact resistance
Operate (set) time
Release (reset) time
100 mΩ max.
15 ms max.
5 ms max.
Max. operating frequency Mechanical:18,000 operation/hr
Electrical:1,800 operation/hr at rated load
Insulation resistance
Dielectric strength
1,000 MΩ min. (at 500 VDC)
5,000 VAC, 1 min between coil and 5,000 VAC, 1 min between coil and
contacts contacts
5,000 VAC, 1 min between coil and
contacts
1,000 VAC, 1 min between contacts 2,500 VAC, 1 min between contacts of 1,000 VAC, 1 min between contacts
of same polarity
different polarity
1,000 VAC, 1 min between contacts of
same polarity
of same polarity
Impulse withstand voltage 10 kV (1.2×50 μs) between coil and contact
Vibration resistance
Destruction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Destruction:1,000 m/s2 (approx. 100 G)
Malfunction:100 m/s2 (approx. 10 G)
Shock resistance
Endurance (Mechanical)
Ambient temperature
20,000,000 operations (at 18,000 operations/hr)
Operating:–40°C to 85°C (with no icing)
Storage:–40°C to 85°C (with no icing)
Ambient humidity
Weight
5% to 85%
Approx. 12 g
Note: Values in the above table are the initial values.
222
PCB Relay G2RL
■ Approved Standards
UL Recognized (File No. E41643) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Model
Contact form
Coil ratings
Contact ratings
G2RL-1A
G2RL-1
SPST-NO
SPDT
3 to 48 VDC
12 A at 250 VAC (General use)
12 A at 24 VDC (Resistive)
16 A at 250 VAC (General use)
16 A at 24 VDC (Resistive)
G2RL-1A-E
G2RL-1-E
G2RL-1A-H
G2RL-1-H
G2RL-2A
G2RL-2
SPST-NO
SPDT
3 to 48 VDC
5 to 24 VDC
3 to 48 VDC
SPST-NO
SPDT
10 A at 250 VAC (General use)
10 A at 24 VDC (Resistive)
DPST-NO
DPDT
8 A at 277 VAC (General use)
8 A at 30 VDC (Resistive)
Note: Consult Omron for additional UL / CSA ratings
VDE (EN61810-1) (License No. 119650)
Model
Contact form
Coil ratings
Contact ratings
G2RL-1(A)
1 pole
1 pole
5, 12, 18, 22, 24, 48 VDC
12 A at 250 VAC (cosφ=1)
12 A at 24 VDC (L/R=0 ms)
AC15: 3 A at 240 VAC
DC13: 2.5 A at 24 VDC, 50 ms
G2RL-1(A)-E
5, 12, 18, 22, 24, 48 VDC
16 A at 250 VAC (cosφ=1)
16 A at 24 VDC (L/R=0 ms)
AC15:
3 A at 240 VAC (NO)
1.5 A at 240 VAC (NC)
2.5 A at 24 VDC (NO), 50 ms
DC13:
G2RL-1(A)-H
G2RL-2(A)
1 pole
5, 9, 12, 24 VDC
10 A at 250 VAC (cosφ=1)
10 A at 24 VDC (L/R=0 ms)
2 poles
5, 12, 18, 22, 24, 48 VDC
8 A at 250 VAC (cosφ=1)
8 A at 24 VDC (L/R=0 ms)
AC15:
DC13:
1.5 A at 240 VAC
2 A at 30 VDC, 50 ms
Note: To achieve approved life cycles on sealed models, the relay should be vented by removing the “knock off vent nib” on top of relay case after
the soldering/washing process.
Electrical Life Data
G2RL-1-E
16 A at 250 VAC (cosφ=1)
30,000 operations min.
16 A at 24 VDC
30,000 operations min.
8 A at 250 VAC (cosφ=0.4)
8 A at 30 VDC (L/R=7 ms)
200,000 operation min. (normally open side operation)
10,000 operation min. (normally open side operation)
G2RL-1
12 A at 250 VAC (cosφ=1)
12 A at 24 VDC
50,000 operations min.
30,000 operations min.
5 A at 250 VAC (cosφ=0.4)
5 A at 30 VDC (L/R=7 ms)
150,000 operation min. (normally open side operation)
20,000 operation min. (normally open side operation)
G2RL-1-H
G2RL-2
10 A at 250 VAC (cosφ=1)
10 A at 24 VDC
100,000 operations min.
50,000 operations min.
8 A at 250 VAC (cosφ=1)
8 A at 30 VDC
30,000 operations min.
30,000 operations min.
Note: 1. The results shown reflect values measured using very severe test conditions i.e., Duty: 1 s ON/1 s OFF.
2. In order to obtain the full rated life cycles on the fully sealed models, the relay should be properly vented by removing the “knock off vent
nib” on top of the relay case after the soldering/washing process.
3. Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed
information for the electrical endurance under your test conditions.
PCB Relay G2RL
223
Engineering Data
■ Maximum Switching Capacity
G2RL-1A, G2RL-1
G2RL-1A-E, G2RL-1-E
G2RL-2A, G2RL-2
50
50
50
AC resistive load
AC resistive load
AC resistive load
10
10
5
10
5
DC resistive
load
5
DC resistive
load
DC resistive
load
1
1
1
0.5
0.5
0.5
0.1
0.1
0.1
0
5
10 20 30 50 100
5001,000
0
5
10 20 30 50 100
5001,000
0
5
10 20 30 50 100
5001,000
Switching voltage (V)
Switching voltage (V)
Switching voltage (V)
■ Ambient Temperature
■ Ambient Temperature
vs Maximum Coil Voltage
250
vs Rated Carry Current
G2RL-1A-H, G2RL-1-H
G2RL-1A-E, G2RL-1-E
G2RL-1A, G2RL-1
AC resistive load
200
180
150
130
DC resistive
load
G2RL-1A-H, G2RL-1-H
G2RL-2A, G2RL-2
100
50
0
10 20 30 40 50 60 70 80 85 90 100
Ambient temperature (°C)
Switching voltage (V)
Ambient temperature (°C)
Note: The maximum coil voltage refers to the maximum
value in a varying range of operating power
voltage, not a continuous voltage.
■ Ambient Temperature vs
Must Operate and
Must Release Voltages
100
Sample: G2RL-14-E 24 VDC
Quantity: 5
Must operate voltage
Must release voltage
90
80
70
60
50
40
30
20
10
max.
min.
max.
min.
0
20
40
60
80
100 120
Ambient temperature (°C)
Note: Contact your OMRON representative for the data on fully sealed models.
■ Shock Malfunction
G2RL-1 (A)-E
G2RL-2 (A)
Y
Y
1,000
1,000
NO contact
NO contact
Sample:
G2RL-14 DC12V
Sample:
G2RL-24 DC12V
Number of Relays: 5pcs
Number of Relays: 5pcs
X'
1,000
Z
X'
1,000
Z
Conditions:
Shock is applied in X, Y,
directions three times each
Z
Conditions:
Shock is applied in X, Y,
directions three times each
Z
1,000
1,000
with and without energizing the
Relays to check the number of
malfunctions.
with and without energizing the
Relays to check the number of
malfunctions.
150
130
Requirement:
None malfunction 100m/s2
Requirement:
None malfunction 100m/s2
1,000
X
1,000
Z'
1,000
X
1,000
Z'
Shock direction
Shock direction
NC contact
NC contact
X
X'
X
X'
Y
Y
Z
Z
Z'
Z'
1,000
Unit: m/s2
1,000
Unit: m/s2
Y'
Y'
Y'
Y'
224
PCB Relay G2RL
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
G2RL-1A(-H), G2RL-1A4
(Bottom View)
Four, 1.3 0.1 dia.
holes
12.7 max.
(12.5)*
3.5
29 max.
(28.8)*
(2.5)
1
3
7.5
15.7 max.
(15.5)*
4
5
(2.3)
20
* Indicates average dimensions.
0.8
0.5
0.5
0.5
3.5
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
G2RL-1(-H), G2RL-14
(Bottom View)
Five, 1.3 0.1 dia.
holes
12.7 max.
(12.5)*
3.53.5
29 max.
(28.8)*
2
1
3
(2.5)
7.5
15.7 max.
(15.5)*
5
4
(2.3)
20
* Indicates average dimensions.
0.8
0.5
0.5
0.5
3.5
0.5
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
5
G2RL-1A-E, G2RL-1A4-E
Six, 1.3 0.1 dia.
holes
12.7 max.
(12.5)*
29 max.
(28.8)*
(2.5)
3
4
1
7.5
15.7 max.
(15.5)*
6
5
8
(2.3)
20
* Indicates average dimensions.
0.8
0.5
0.5
0.5
3.5
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
G2RL-1-E, G2RL-14-E
(Bottom View)
Eight, 1.3 0.1 dia.
holes
12.7 max.
(12.5)*
5
5
29 max.
(28.8)*
(2.5)
1
4
2
3
7.5
15.7 max.
(15.5)*
6
8
7
5
(2.3)
20
0.8
0.5
0.5
0.5
* Indicates average dimensions.
3.5
0.5
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
5
G2RL-2A, G2RL-2A4
Six, 1.3 0.1 dia.
holes
12.7 max.
(12.5)*
29 max.
(28.8)*
(2.5)
4
3
1
8
7.5
15.7 max.
(15.5)*
6
5
20
(2.3)
0.8 * Indicates average dimensions.
0.5
0.5
0.5
3.5
Terminal Arrangement/
Mounting Holes
G2RL-2, G2RL-24
Eight, 1.3 0.1 dia.
holes
Internal Connection
(Bottom View)
12.7 max.
(12.5)*
(Bottom View)
5
5
29 max.
(28.8)*
(2.5)
2
4
1
3
7.5
15.7 max.
(15.5)*
5
8
7
6
(2.3)
20
* Indicates average dimensions.
0.8
0.5
0.5
0.5
3.5
0.5
PCB Relay G2RL
225
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
09/11
Specifications subject to change without notice
Printed in USA
Cat. No. X301-E-1b
PCB Relay G2RL
相关型号：
G2RL-2DC5
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.08A (Coil), 5VDC (Coil), 400mW (Coil), 8A (Contact), 300VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明