G3R-IDZR1SN-DC5 [OMRON]
Trigger Output SSR, 1-Channel, 4000V Isolation;
| 型号： | G3R-IDZR1SN-DC5 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Trigger Output SSR, 1-Channel, 4000V Isolation 输出元件 光电 |
| 文件： | 总8页 (文件大小：611K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety
of sensors are available.
• Input Modules and Output Modules that have the same
form-factor as the G2R.
• Using a coupler approved by VDE 0884 and assuring an
I/O dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV. (“-UTU” models)
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■ Input Module
Isolation
Indicator
Response speed
Logic level
Rated input
voltage
Model
Supply voltage
4 to 32 VDC
Supply current
Photocoupler
Yes
—
0.1 to 100 mA
100 to 240 VAC
5 VDC
G3R-IAZR1SN
G3R-IDZR1SN
High-speed
(1 kHz)
12 to 24 VDC
5 VDC
Low-speed
(10 Hz)
G3R-IDZR1SN-1
12 to 24 VDC
■ Output Module
Isolation
Phototriac
Photocoupler
Indicator
Zero cross
function
Rated output
load
Rated input
voltage
Model
Yes
Yes
No
—
2 A at 100 to 240 VAC
5 to 24 VDC
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
2 A at 5 to 48 VDC
1.5 A at 48 to 200 VDC
Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU DC5-24.
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark attached to the top of the product
Mark indication
Specification
Input module, AC input
Input module, DC input
Output module, AC output
Output module, DC output
AC IN
DC IN
AC OUT
DC OUT
Solid State Relay G3R-I/O
431
Specifications
■ Ratings (at an Ambient Temperature of 25°C)
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
G3R-IDZR1SN
100 to 240 VAC
5 VDC
60 to 264 VAC
4 to 6 VDC
15 mA max.
8 mA max.
60 VAC max.
20 VAC min.
4 VDC max.
6.6 VDC max.
4 VDC max.
6.6 VDC max.
1 VDC min.
3.6 VDC min.
1 VDC min.
3.6 VDC min.
12 to 24 VDC
5 VDC
6.6 to 32 VDC
4 to 6 VDC
G3R-IDZR1SN-1
12 to 24 VDC
6.6 to 32 VDC
Output
Model
Logic level supply voltage
4 to 32 VDC
Logic level supply current
0.1 to 100 mA
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Output Module
Input
Model
Rated voltage
5 to 24 VDC
Operating voltage
Input current
15 mA max.
Must operate
voltage
Must release
voltage
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
4 to 32 VDC
4 VDC max.
1 VDC min.
(at 25°C)
8 mA max.
Output
Model
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
Rated load voltage
Load voltage range
Load current (see note)
Inrush current
100 to 240 VAC
75 to 264 VAC
0.05 to 2 A
30 A (60 Hz, 1 cycle)
5 to 48 VDC
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
8 A (10 ms)
48 to 200 VDC
40 to 200 VDC
0.01 to 1.5 A
Note: The minimum current value is measured at 10°C min.
432
Solid State Relay G3R-I/O
Characteristics
■ Input Module
Item
G3R-IAZR1SN
20 ms max.
G3R-IDZR1SN
0.1 ms max.
G3R-IDZR1SN-1
15 ms max.
Operate time
Release time
20 ms max.
10 Hz
0.1 ms max.
1 kHz
15 ms max.
10 Hz
Response frequency
Output ON voltage drop
Leakage current
1.6 V max.
5 μA max.
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Ambient temperature
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Weight
Operating: 45% to 85%
Approx. 18 g
■ Output Module
Item
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
1 ms max.
G3R-OA201SN
Operate time
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
20 Hz
Release time
2 ms max.
100 Hz
Response frequency
Output ON voltage drop
Leakage current
1.6 V max.
2.5 V max.
1.5 mA max.
1 mA max.
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Ambient temperature
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Weight
Operating: 45% to 85%
Approx. 18 g
Solid State Relay G3R-I/O
433
Engineering Data
Load Current vs. Ambient Temperature
G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-ODX02SN(-UTU) (4 to 60 VDC) G3R-OD201SN(-UTU) (40 to 200 VAC)
4-point mounting (see note 1)
16-point mounting (see note 2)
4-point mounting (see note 1)
16-point mounting (see note 2)
2
2
2
4-point mounting (see note 1)
1.5
1.4
1.5
1.4
1.5
Single-point
mounting
Single-point
mounting
1.1
1
1
1
Single-point
mounting
16-point mounting
(see note 2)
0.7
0.5
0.6
0.5
0.5
−30 −20
0
20 30 40 55 60
80
100
−30 −20
0
20
40 55 60
C)
80
100
−30 −20
0
20
40 55 60
C)
80
100
Ambient temperature (
°C)
Ambient temperature (
°
Ambient temperature (°
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU)
G3R-ODX02SN(-UTU)
G3R-OD201SN(-UTU)
10
10
9
9
30
8
8
7
7
6
5
6
5
20
10
4
4
3
2
1
3
2
1
0
0
10
30 50 100 200 500 1000
Energized time (ms)
5000
10
30 50
100
300 500 1000 2000
10
30 50
100
300 500 1000 2000
Energized time (ms)
Energized time (ms)
434
Solid State Relay G3R-I/O
Dimensions
Unit: mm (inch)
■ G3R
Terminal Arrangement/
Internal Connections
(Bottom View)
1
5.2
3
3
4
9.6
(+)
0.5
29 max.
(−)
17.4
4
4.75
Load
Input
1
5
28 max.
5
13 max.
7.5
4.7
0.5
4.75
4
1
5
10
(−)
(+)
2
20
■ Connecting Sockets
P2RF-05
Five, M3.5×8
G3R I/O Relay
4 dia.
4.2-dia. hole
12
71.5 max.
P2RF-05 Socket
58.5 *
M3 (M3 x16) or
3.2-dia. hole
19.5 max.
30 max.
54 max.
*
Indicates a value when using the PFP-@N
Supporting Rail.
The value is 67.5 when using the PFP-@N2.
G3R I/O Relay
59 max.
48 max.
M3.5 screw
P2RF-05-E
PFRF-05-E
Socket
3.2-dia. hole
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-@N2.
61 max.
*** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-@N2.
14.5 max.
P2R-05A
G3R I/O Relay
35.5 max.
P2R-05A Socket
Five, 3x1.5-dia. hole
(Panel thickness must
be 1.6 to 2.0 mm.)
(For use when mounting in a panel or in
the P2R-P mounting plate )
36 max.
Solid State Relay G3R-I/O
435
14.5 max.
P2R-05P
Five, 1.6-dia. hole
G3R I/O Relay
35.5 max.
P2R-05P Socket
Dimensional tolerance is 0.1.
Five, 1.6-dia. hole
36 max.
14 max.
P2R-057P
G3R I/O Relay
32 max.
P2R-057P Socket
41 max.
■ Socket Mounting Plate
Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row.
P2R-P
R2.25
10 ellipses
Square hole
■ Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535)
Model G3R-
Module type
Rating
IAZR1SN
Input
100 to 240 VAC
IDZR1SN
Input
5 VDC, 12 to 24 VDC
5 VDC, 12 to 24 VDC
5 to 24 VDC
IDZR1SN-1
OA202SZN
OA202SLN
ODX02SN
OD201SN
Input
Output
Output
Output
Output
5 to 24 VDC
5 to 24 VDC
5 to 24 VDC
Model G3R-
Module type
Output rating
IAZR1SN
Input
Input
Input
Output
32 VDC, 100 mA (General Purpose)
32 VDC, 100 mA (General Purpose)
32 VDC, 100 mA (General Purpose)
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
IDZR1SN
IDZR1SN-1
OA202SZN
264 VAC, 1 A FLA, 6 A LRA
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
OA202SLN
Output
264 VAC, 1 A FLA, 6 A LRA
60 VDC, 2 A (General Purpose)
60 VDC, 1 A (Tungsten)
ODX02SN
OD201SN
Output
Output
200 VDC, 1.5 A (General Purpose)
200 VDC, 0.75 A (Tungsten)
436
Solid State Relay G3R-I/O
Precautions
■ Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
■ Protective element
Since the SSR does not incorporate an overvoltage absorption com-
ponent, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
■ Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
G3R
G3R
Solid State Relay G3R-I/O
437
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
09/11
Specifications subject to change without notice
Printed in USA
Cat. No. X301-E-1b
Solid State Relay G3R-I/O
相关型号：
©2020 ICPDF网 联系我们和版权申明