G3RV-SR700-AAC/DC24_技术文档

Slim I/O Relays

G2RV-SR/G3RV-SR

Global standard size, low profile

slim (6.2 mm width) I/O relays

G2RV-SR:

G3RV-SR:

• 25% lower profile than conventional products, contributing

to a smaller control panel.

• Push-In Plus terminal blocks reduce wiring work by 60%*

compared to conventional screw terminals.

• ‘Hand-free’ structure that holds an inserted flat-blade

screwdriver to achieve easier wiring work for stranded

wires.

• Electromechanical relays (G2RV-SR) and solid state

relays (G3RV-SR) are available.

• Screw terminal terminal block models are available.

• Plug-in terminal has strong mechanical pins that do not

bend.

* According to OMRON actual measurement data from November 2015.

For the recent information on models that have been certified

for safety standards, refer to your OMRON website.

Refer to Safety Precautions on page 20.

Slim I/O Relay Types

G2RV-SR series mounted relay: electromagnetic relay ......from page 2

G3RV-SR series mounted relay: solid state relay ................from page 10

Common matter

Common precautions................................................................from page 20

Common accessories (order separately).................................page 24

1

Slim Electromechanical I/O Relay

G2RV-SR

Global standard size, low profile,

slim (6.2 mm width) I/O relay

• 25% lower profile than conventional products, contributing

to a smaller control panel.

• Opening and closing ability with one pole 6 A slim shape.

• Micro load products for one pole 50 mA using gold-plated

contacts for small load switching also available.

• Since G2RV has a transparent case, confirming the state

of the contact with the naked eye is possible.

• Screw terminal terminal block models are available.

• Plug-in type terminal has strong mechanical pins that do

not bend.

For the recent information on models that have been certified

for safety standards, refer to your OMRON website.

Refer to Safety Precautions on page 20.

Features

With latching lever

Push-In Plus Terminal Block

Standard model/Micro load

(Test switch)

Terminal x 5

• Push-in

• Screw

Short bar insertion holes

Protective cover

(Released state)

Operation

display LED

(Socket section)

Release hole

Release lever

Protective cover

(Locked condition)

Latching lever

(Test switch)

Terminal (insertion) hole

Latching lever

(Test switch)

• Circuit check operation

Confirmation, reducing the inspection effort

Mechanical

indicator

• Operation

verification

which is linked

to the contact

PAT

"Foreign matter intrusion prevention structure"

"Malfunction prevention stopper"

Transparent case

Relay contact

Easy confirmation

of the situation

Release lever

Relay easily

fixed/removed

90 mm

Plug-in terminal

Terminal has strong

mechanical pins that

do not bend.

80 mm

2

G2RV-SR

Model Number Structure

Model Number Legend

G2RV-SR @@ @ - @ @

(1)

(2) (3) (4) (5) (6)

(1) Basic model name

G2RV: Slim I/O Relay

(3) Terminal (wire connection)

50: Push-In Plus Terminal

70: Screw terminal

(5) Contact structure

Blank: Standard

AP: Microloads

(2) Sub type

(6) Rated input voltage

12, 24 VDC

24, 48 VAC/VC

SR: Slim relay + integrated low profile socket

(4) Latching lever (test switch)

0: Without latching lever

1: With latching lever

100, 110, 200, 230 VAC

Ordering Information

Terminal

(Wire connection)

Latching lever

(Test switch)

Classification

Rated input voltage (V)

Model

12

G2RV-SR500 DC12

DC

24

G2RV-SR500 DC24

24

G2RV-SR500 AC/DC24

G2RV-SR500 AC/DC48

G2RV-SR500 AC100

AC/DC

48

No

100

110

200

230

24

Standard

G2RV-SR500 AC110

AC

G2RV-SR500 AC200

G2RV-SR500 AC230

DC

G2RV-SR501 DC24

Push-In Plus

Terminal

Yes

AC/DC

24

G2RV-SR501 AC/DC24

G2RV-SR500-AP DC12

G2RV-SR500-AP DC24

G2RV-SR500-AP AC/DC24

G2RV-SR500-AP AC/DC48

G2RV-SR500-AP AC100

G2RV-SR500-AP AC110

G2RV-SR500-AP AC200

G2RV-SR500-AP AC230

G2RV-SR700 DC12

12

DC

24

AC/DC

48

Microloads

No

100

110

200

230

12

AC

DC

24

G2RV-SR700 DC24

24

G2RV-SR700 AC/DC24

G2RV-SR700 AC/DC48

G2RV-SR700 AC100

AC/DC

48

No

100

110

200

230

24

Standard

G2RV-SR700 AC110

AC

G2RV-SR700 AC200

G2RV-SR700 AC230

DC

G2RV-SR701 DC24

Screw terminal

Yes

AC/DC

24

G2RV-SR701 AC/DC24

G2RV-SR700-AP DC12

G2RV-SR700-AP DC24

G2RV-SR700-AP AC/DC24

G2RV-SR700-AP AC/DC48

G2RV-SR700-AP AC100

G2RV-SR700-AP AC110

G2RV-SR700-AP AC200

G2RV-SR700-AP AC230

12

DC

24

AC/DC

48

Microloads

No

100

110

200

230

AC

Note: Solid wire cannot be used for Push-In Plus terminal type. Make sure to use stranded wire or stranded wire with ferrules.

3

G2RV-SR

Relay for Maintenance

Model Number Legend

G2RV-1-SI-G

G2RV-1-S-G(-AP)

G2RV-1 - S @ - @ - G @

(1) (2) (3) (4) (5) (6)

(1) No. of poles

1: 1 pole

(4) Contact material

Blank: Silver alloy

AP: Silver alloy + gold plate

(2) Terminal

(5) Types of relay for exchange

G: G2RV-SR series equipped

Relay

S: plug-in

(3) Latching lever (Test switch)

Blank: Without latching lever

I: With latching lever

(6) Rated coil voltage

Number: 11, 21, 48 VDC

List of Models

Latching

Lever

(Test switch)

Rated coil

voltage (V)

Type

Model

Applicable model

11

G2RV-1-S-G DC11

G2RV-1-S-G DC21

G2RV-SR700/500 DC12V

G2RV-SR700/500 DC24V

G2RV-SR700/500 AC/DC24V

G2RV-SR700/500 AC/DC48V

G2RV-SR700/500 AC100V

G2RV-SR700/500 AC110V

G2RV-SR700/500 AC200V

G2RV-SR700/500 AC230V

G2RV-SR701/501 DC24V

G2RV-SR701/501 AC/DC24V

G2RV-SR700/500-AP DC12V

G2RV-SR700/500-AP DC24V

21

48

No

DC

Standard

G2RV-1-S-G DC48

Yes

21

11

21

G2RV-1-SI-G DC21

G2RV-1-S-AP-G DC11

G2RV-1-S-AP-G DC21

G2RV-SR700/500-AP AC/DC24V

G2RV-SR700/500-AP AC/DC48V

G2RV-SR700/500-AP AC100V

G2RV-SR700/500-AP AC110V

G2RV-SR700/500-AP AC200V

G2RV-SR700/500-AP AC230V

Microload No

48

G2RV-1-S-AP-G DC48

4

G2RV-SR

Specifications

Ratings

Coil ratings

Operation

voltage

Maximum

allowable voltage

Release

voltage

Rated current

Power consumption

Rated input

voltage

AC

Percentage of the

rated voltage

DC

Percentage of the rated voltage

AC (VA)

DC (mW)

50 Hz

60 Hz

12 VDC

–

27.2 mA

–

Approx. 300 mW

24 VDC

13.3 mA

24 VAC/VDC

48 VAC/VDC

100 VAC

110 VAC

200 VAC

230 VAC

21.1 mA 22.5 mA

13.0 mA

Approx. 0.5 VA Approx. 300 mW

Approx. 0.4 VA Approx. 250 mW

8.5 mA

7.1 mA

7.2 mA

7.3 mA

9.0 mA

7.5 mA

7.9 mA

5.2 mA

80% max.*

10% min.

110%

–

Approx. 0.8 VA

Approx. 1.7 VA

–

Note: The operating characteristics are measured at ambient temperature of 23°C.

* Operating voltage will be 85% max. for upside down mounting.

Contact ratings

Item

Standard (G2RV-SR700, 500, 701, 501)

For microloads (G2RV-SR700-AP, 500-AP) *2

Contact configuration

SPDT

Resistive load

(cosφ=1)

Inductive load

(cosφ=0.4, L/R=7ms)

Resistive load

(cosφ=1)

Load

6 A at 250 VAC

6 A at 30 VDC

2.5 A at 250 VAC

2 A at 30 VDC

50 mA at 30 VAC

50 mA at 36 VDC

Rated load

Rated carry current

6 A

50 mA

Maximum switching voltage

Maximum switching current

440 VAC, 125 VDC

6 A

30 VAC, 36 VDC

50 mA

1,500 VA

180 W

500 VA

60 W

Maximum switching power

–

Failure rate P value

(reference value) *1

10 mA at 5 VDC

1 mA at 100 mVDC

*1. P level: λ60=0.1×10^-6/times

This value is the value in switching frequency 120 operations/min.

*2. If the gold plating layer is destroyed, the number will be the same as the standard type.

Characteristics

Item

Contact resistance *

Operate (Set) time *

Standard (G2RV-SR700, 500, 701, 501)

100 mΩ max.

For microloads (G2RV-SR700-AP, 500-AP)

20 ms max.

AC, AC/DC: 40 ms max.

DC: 20 ms max.

Release time *

Mechanical: 18,000 operations/h

Electrical: 1,800 operations/h (rated load)

Maximum operating frequency

Insulation resistance

1,000 MΩ min. (at 500 VDC)

Between coil and contacts: 4,000VAC 50/60 Hz 1 min

Contact between the same polarity: 1,000 VAC 50/60 Hz 1 min

Dielectric strength

Destruction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)

Malfunction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)

Vibration resistance

Shock resistance

Destruction: 1,000 m/s²

Malfunction: Energized 200m/s², Non-energized 100m/s²

Mechanical 5,000,000 operations min.

Endurance *

NO contact: 70,000 operations min.

5,000,000 operations min.

Electrical

NC contact: 50,000 operations min.

Ambient operating temperature Operating: –40 to +55°C (with no icing or condensation)

Ambient operating humidity

Weight

Operating: 5 to 85% RH

Approx. 30 g

Contact material

Ag alloy

Ag alloy + Au plating

Note: Above values are initial values.

* Value is at ambient temperature of 23°C.

5

G2RV-SR

Approved standards

UL508 (file No.E41643)

Model

No. of poles

Operation coil ratings

Contact ratings

Operations

6 A at 250 VAC (Resistive load)

6 A at 30 VDC (Resistive load)

2 A at 400 VAC (Resistive

load)*

12 to 48 VDC

24 to 230 VAC

G2RV-SR series

SPDT

6,000

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).

12 mm 12 mm 12 mm

VDE (EN 61810-1)

Model

No. of poles

Operation coil ratings

12, 24 VDC

24, 48 VAC/VDC

100, 110, 200, 230 VAC

Contact ratings

Operations

6 A at 250 VAC (Resistive load)

6 A at 30 VDC (Resistive load)

2 A at 400 VAC (Resistive

load)*

50,000

6,000

G2RV-SR series

SPDT

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).

12 mm 12 mm 12 mm

Engineering Data

Endurance curve (N.O. side)

Switching capacity of DC resistive load

10.0

1000

30 VDC resistive load

250 VAC resistive load

1.0

100

30 VDC

resistive load

250 VAC resistive load

10

0

0.1

2

4

6

20

60

100

140

180

220

Opening and closing current (A)

DC switching voltage (V)

6

G2RV-SR

Dimensions

(unit: mm)

Slim I/O Relay + socket

Push-In Plus Terminal Block

Models without latching lever (without test switch)

G2RV-SR500

G2RV-SR500-AP

Terminal Arrangement/Internal Connection Diagram

(TOP VIEW)

12 VDC

78 max.

Input circuit

A1

A2

G2RV

3.4

74.5

65.89

Other voltage

35.25

18.78

Input circuit

(5.05)

A1

A2

G2RV

12

14

11

78.77

35.3

90 max.

24 VDC

Input circuit

12

14

A1

A2

G2RV

11

*

: Diode bridge

(5.05)

: Light emitting diode

18.78

35.25

51.72

59.71

6.2 max.

12

14

11

Models with latching lever (with test switch)

G2RV-SR501

Terminal Arrangement/Internal Connection Diagram

(TOP VIEW)

12 VDC

81 max.

Input circuit

A1

A2

G2RV

3.4

77.5

65.89

Other voltage

Input circuit

A1

35.25

18.78

(5.05)

A2

G2RV

12

14

11

78.77

24 VDC

35.3

90 max.

Input circuit

A1

A2

12

14

G2RV

11

*

: Diode bridge

(5.05)

: Light emitting diode

18.78

35.25

51.72

59.71

6.2 max.

12

14

11

7

G2RV-SR

Screw terminal

Models without latching lever (without test switch)

G2RV-SR700

Terminal Arrangement/Internal Connection Diagram

(TOP VIEW)

G2RV-SR700-AP

12 VDC

Input circuit

A1

78 max.

A2

G2RV

3.4

74.5

65.89

Other voltage

35.18

18.71

Input circuit

A1

(5.05)

A2

G2RV

12

14

11

78.77

35.3

90 max.

24 VDC

Input circuit

12

14

A1

A2

G2RV

11

*

: Diode bridge

(5.05)

18.71

35.18

51.65

56.2

: Light emitting diode

6.2 max.

12

14

11

Models with latching lever (with test switch)

G2RV-SR701

Terminal Arrangement/Internal Connection Diagram

(TOP VIEW)

12 VDC

Input circuit

A1

81 max.

77.5

A2

G2RV

3.4

Other voltage

Input circuit

A1

65.89

35.18

18.71

(5.05)

A2

G2RV

12

14

11

78.77

24 VDC

35.3

90 max.

Input circuit

12

14

A1

A2

G2RV

11

*

: Diode bridge

(5.05)

18.71

35.18

51.65

56.2

: Light emitting diode

6.2 max.

12

14

11

8

G2RV-SR

Relay for maintenance

Models without latching lever

G2RV-1-S-G

G2RV-1-S-AP-G

5.2 max.

30.5 max.

Terminal Arrangement/

Internal Connection Diagram

(TOP VIEW)

33 max.

(Input circuit)

16.2

12

A1 A2

14 11

1.8

0.5

2.4

3.5

5.04

22

3

Models with latching lever (test switch)

G2RV-1-SI-G

5.2 max.

30.5 max.

Terminal Arrangement/

Internal Connection Diagram

(TOP VIEW)

(Input circuit)

36 max.

12

A1 A2

14 11

16.2

0.5

1.8

2.4

3.5

5.04

22

3

9

G^Slim3^I/OR^SoV^{lid S}-^tS^ateR^Relay

Global standard size, low profile, slim

(6.2 mm width) I/O solid state relay.

• 25% lower profile than conventional products, contributing to a

smaller control panel.

• Optimal slim, high frequency, high-speed opening and closing

SSR (solid state relay).

• Slim shape with a switching capacity up to 3 A (DC), and

2 A (AC).

• Because MOSFET is used for the outlet element for the DC

load, opening and closing load of 100 µA to 3 A is possible.

• Check operating status at a glance with the operating display

LED.

• Mounted I/O SSR (solid-state relay) uses plug-in terminals with

strong mechanical pins that do not bend.

For the recent information on models that have been certified

for safety standards, refer to your OMRON website.

Refer to Safety Precautions on page 20.

Features

Push-In Plus Terminal Block

Terminal x 5

• Push-in

• Screw

Short bar insertion holes

Release hole

Operation display LED

(Socket section)

Release lever

Operation

display LED

(SSR section)

Terminal (insertion) hole

Release lever

Relay easily

fixed/removed

90 mm

Plug-in terminal

Terminal has strong

mechanical pins that

do not bend.

80 mm

10

G3RV-SR

Model Number Structure

Model Number Legend

G3RV-SR @ @ @ - @ @

(1)

(2)

(3)

(4) (5)

(1) Basic model name

G3RV: Slim I/O Solid State Relay

(4) Output voltage specification

: AC output (triac) zero cross function available

AL : AC output (triac) zero cross function not available

: DC output (MOS FET)

A

(2) Sub type

D

SR: Slim solid relay + integrated low profile socket

(5) Rated voltage input

12, 24 VDC

24, 48 VAC/VDC

(3) Terminal (wire connection)

500: Push-In Plus Terminal

700: Screw terminal

100, 110, 200, 230 VAC

11

G3RV-SR

Ordering Information

Terminal

(wire connection)

Applicable

output load

Zero cross

function

Rated input voltage

(V)

Model

12

G3RV-SR500-D DC12

G3RV-SR500-D DC24

G3RV-SR500-D AC/DC24

G3RV-SR500-D AC/DC48

G3RV-SR500-D AC100

G3RV-SR500-D AC110

G3RV-SR500-D AC200

G3RV-SR500-D AC230

G3RV-SR500-A DC12

G3RV-SR500-A DC24

G3RV-SR500-A AC/DC24

G3RV-SR500-A AC/DC48

G3RV-SR500-A AC100

G3RV-SR500-A AC110

G3RV-SR500-A AC200

G3RV-SR500-A AC230

G3RV-SR500-AL DC12

G3RV-SR500-AL DC24

G3RV-SR500-AL AC/DC24

G3RV-SR500-AL AC/DC48

G3RV-SR500-AL AC100

G3RV-SR500-AL AC110

G3RV-SR500-AL AC200

G3RV-SR500-AL AC230

G3RV-SR700-D DC12

G3RV-SR700-D DC24

G3RV-SR700-D AC/DC24

G3RV-SR700-D AC/DC48

G3RV-SR700-D AC100

G3RV-SR700-D AC110

G3RV-SR700-D AC200

G3RV-SR700-D AC230

G3RV-SR700-A DC12

G3RV-SR700-A DC24

G3RV-SR700-A AC/DC24

G3RV-SR700-A AC/DC48

G3RV-SR700-A AC100

G3RV-SR700-A AC110

G3RV-SR700-A AC200

G3RV-SR700-A AC230

G3RV-SR700-AL DC12

G3RV-SR700-AL DC24

G3RV-SR700-AL AC/DC24

G3RV-SR700-AL AC/DC48

G3RV-SR700-AL AC100

G3RV-SR700-AL AC110

G3RV-SR700-AL AC200

G3RV-SR700-AL AC230

DC

24

AC/DC

48

DC load

AC load

DC load

AC load

—

Yes

No

—

100

110

AC

200

230

12

DC

24

AC/DC

48

Push-In Plus Terminal

100

110

AC

200

230

12

DC

24

AC/DC

48

100

110

AC

200

230

12

DC

24

AC/DC

48

100

110

AC

200

230

12

DC

24

AC/DC

48

Screw terminal

Yes

100

110

AC

200

230

12

DC

24

AC/DC

48

No

100

110

AC

200

230

Note: Solid wire cannot be used for Push-In Plus terminal type. Make sure to use stranded wire or stranded wire with ferrules.

12

G3RV-SR

Solid state relay for maintenance

Model Number Legend

G3RV-@ @ S @ @

(1) (2) (3) (4) (5)

(1) Output voltage

specification

D: DC output

(3) Terminal

S: Plug-in type

(4) Zero cross functions

2: AC output

Blank: Zero cross function available

L: Zero cross function not available

(2) Rated current

02: AC output 2 A

03: DC output 3 A

(5) Rated input voltage

Number: 12, 24, 48 VDC

List of Models

Rated

output

Load *

Rated input

voltage

(socket)

Insulation Operation Output Zero cross

Model

Applicable model

method

Display

(SSR) Function

12 VDC

G3RV-202S DC12

G3RV-202S DC24

G3RV-SR700/500-A DC12V

G3RV-SR700/500-A DC24V

24 VDC

24 VAC/VDC

48 VAC/VDC

100 VAC

110 VAC

200 VAC

230 VAC

12 VDC

G3RV-SR700/500-A AC/DC24V

G3RV-SR700/500-A AC/DC48V

G3RV-SR700/500-A AC100V

G3RV-SR700/500-A AC110V

G3RV-SR700/500-A AC200V

G3RV-SR700/500-A AC230V

G3RV-SR700/500-AL DC12V

G3RV-SR700/500-AL DC24V

G3RV-SR700/500-AL AC/DC24V

G3RV-SR700/500-AL AC/DC48V

G3RV-SR700/500-AL AC100V

G3RV-SR700/500-AL AC110V

G3RV-SR700/500-AL AC200V

G3RV-SR700/500-AL AC230V

G3RV-SR700/500-D DC12V

G3RV-SR700/500-D DC24V

G3RV-SR700/500-D AC/DC24V

G3RV-SR700/500-D AC/DC48V

G3RV-SR700/500-D AC100V

G3RV-SR700/500-D AC110V

G3RV-SR700/500-D AC200V

G3RV-SR700/500-D AC230V

Yes

G3RV-202S DC48

2 A

(at 100 to

240

Photo-

triac

AC

G3RV-202SL DC12

G3RV-202SL DC24

VAC)

24 VDC

24 VAC/VDC

48 VAC/VDC

100 VAC

110 VAC

200 VAC

230 VAC

12 VDC

Yes

(green)

No

G3RV-202SL DC48

G3RV-D03SL DC12

G3RV-D03SL DC24

24 VDC

24 VAC/VDC

48 VAC/VDC

100 VAC

110 VAC

200 VAC

230 VAC

Photo-

voltage

coupler

3 A

(at 5 to

24 VDC)

DC

–

G3RV-D03SL DC48

* Different depending on the ambient temperature.

For more details, refer to Load current vs. ambient rated temperature on page 16.

13

G3RV-SR

Specifications

Rating (ambient temperature 25°C)

Input

G3RV-SR700/500-A series

Rated current

Input voltage

Rated input

voltage

Release

voltage

Operation

voltage

AC

Percentage of the

rated voltage

DC

50 Hz

60 Hz

12 VDC

–

15 mA

10.8 V max.

21.6 V max.

43.2 V max.

90 V max.

24 VDC

12 mA

24 VAC/VDC

48 VAC/VDC

100 VAC

20 mA

10 mA

7.5 mA

7.3 mA

21 mA

11 mA

7.5 mA

7.7 mA

8.6 mA

11 mA

6 mA

1 V min.

10%

–

110 VAC

99 V max.

200 VAC

180 V max.

207 V max.

230 VAC

G3RV-SR700/500-AL series

Rated current

AC

Input voltage

Release

voltage

Operation

voltage

Rated input

voltage

Percentage of the

rated voltage

DC

50 Hz

60 Hz

12 VDC

–

15 mA

10.8 V max.

21.6 V max.

43.2 V max.

90 V max.

24 VDC

–

12 mA

24 VAC/VDC

48 VAC/VDC

100 VAC

20 mA

10 mA

7.5 mA

7.3 mA

21 mA

11 mA

7.7 mA

8.6 mA

11 mA

6 mA

1 V min.

10%

–

110 VAC

99 V max.

200 VAC

180 V max.

207 V max.

230 VAC

G3RV-SR700/500-D series

Rated current

AC

Input voltage

Rated input

voltage

Operation

voltage

Release

voltage

Percentage of the

rated voltage

DC

50 Hz

60 Hz

12 VDC

–

8 mA

10.8 V max.

21.6 V max.

43.2 V max.

90 V max.

24 VDC

–

4.5 mA

24 VAC/VDC

48 VAC/VDC

100 VAC

10.7 mA 11.1 mA 4.3 mA

9.6 mA

6.8 mA

10.2 mA 6 mA

10%

1 V min.

7.2 mA

8.1 mA

–

110 VAC

99 V max.

200 VAC

180 V max.

207 V max.

230 VAC

Output

Item

G3RV-SR700/500-A(L)

G3RV-SR700/500-D

Rated load voltage

Load voltage range

Load current

100 to 240 VAC (50/60 Hz)

75 to 264 VAC (50/60 Hz)

5 to 24 VDC

3 to 26.4 VDC

0.1 to 2 A (Ambient temperature=25°C) 100 µA to 3 A (Ambient temperature=25°C)

Inrush current resistance

Permissible l²t; Joule integral value

(reference value)

30 A (60 Hz, 1 cycle)

15A²s

30 A (60 Hz, 1 cycle)

9 A²s

400 W

72 W

Applied load capacity

(Output voltage: 200 VAC)

(Output voltage: 24 VDC)

14

G3RV-SR

Characteristics

Item

G3RV-SR700/500-A

G3RV-SR700/500-AL

3 ms max.

60 ms max.

G3RV-SR700/500-D

6 ms max.

1/2 cycle of load power supply

+1 ms max.

Operate time

Release time

60 ms max.

–

Output ON voltage drop

Output ON resistance

1.6 V (RMS) max.

–

0.3 Ω max. (at 24 VDC)

Leakage current

5 mA max. (at 200 VAC, 50/60 Hz)

10 µA max. (at 24 VDC)

Insulation resistance

Dielectric strength

Vibration resistance

Shock resistance

100 MΩ min. (at 500 VDC)

Between input and output 2,500 VAC 50/60 Hz 1 min

Malfunction: 10 to 55 to 10 Hz double amplitude 0.70 mm

300m/s²

Storage: –30 to +100°C (with no icing or no condensation)

Operating: –30 to +55°C (with no icing or no condensation)

Ambient operating temperature

Ambient operating humidity

Weight

45 to 85% RH

Approx. 38 g

2

Pollution degree

The degree of protection by

IEC60529

IP20

Rated impulse dielectric

strength

4.0 kV/III

Load category

LC-A

DC-12

1.5Ie 1.1Ue

5s ON, 10s OFF, 10 cycles

Overload current profile

Rated insulation voltage

240 V

Approved standards

UL 508 (file No.E64562)

Model

Input ratings

12, 24 VDC

24, 48 VAC/VDC

Contact ratings

24 VDC 3 A (resistive load) at 25°C

G3RV-SR700/500-D series

G3RV-SR700/500-A(L) series

100, 110, 200, 230 VAC

12, 24 VDC

24, 48 VAC/DC

240 VAC 2 A (resistive load) at 25°C

100, 110, 200, 230 VAC

TÜV 62314

Model

Input ratings

Contact ratings

12, 24 VDC

24, 48 VAC/VDC

100, 110, 200, 230 VAC

G3RV-SR700/500-D series

G3RV-SR700/500-A(L) series

24 VDC 3 A (resistive load)

12, 24 VDC

24, 48 VAC/VDC

100, 110, 200, 230 VAC

240 VAC 2 A (resistive load)

15

G3RV-SR

Engineering Data

Load current vs. ambient rated temperature

G3RV-SR700/500-A(L) series

Product mounting spacing 10 mm (Separate Mounting)

Close mounting (up to 5 units *)

5

4

3

2

4

3

2

1

0

0.2

0

−30 −20

0

20 25 40 55 60

80

100

0

20 25 40 55 60

80

100

Ambient temperature (°C)

G3RV-SR700/500-D series

Product mounting spacing 10 mm (Separate Mounting)

Close mounting (up to 5 units *)

5

4

3

2

4

3

2

1

0

0.5

0

−30 −20

0

20 25 40 55 60

80

100

−30 −20

0

20 25 40 55 60

80

100

Ambient temperature (°C)

* When five or more are installed, install with 10 mm space between

each.

For details, please refer to Mounting on page 23.

Inrush Current Resistance: Non-repetitive

Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively.

G3RV-SR700/500-A(L) series

G3RV-SR700/500-D series

40

35

30

35

30

25

20

15

10

5

25

20

15

10

5

0

10

30 50 100

300 500 1,000 3,000 5,000

Energized time (ms)

10

30 50 100

300 500 1,000 3,000 5,000

Energized time (ms)

16

G3RV-SR

Dimensions

(unit: mm)

Solid state relay + socket

Push-In Plus Terminal Block

G3RV-SR500

Terminal Arrangement/

Internal Connection Diagram

(TOP VIEW)

12 VDC

Input circuit

A1

78 max.

G3RV

A2

A2–

INPUT

3.4

74.5

A1+

65.89

13 (+)

35.25

18.78

OUTPUT

(5.05)

14 (–)

12

14

The information in

parentheses in for

a DC output.

13

78.77

35.3

90 max.

24 VDC

Input circuit

A1

A2

G3RV

A2–

INPUT

A1+

(5.05)

18.78

35.25

51.72

59.71

6.2 max.

13 (+)

OUTPUT

14 (–)

12

14

The information in

parentheses in for

a DC output.

13

Other voltage

Input circuit

A1

A2

G3RV

A2–

INPUT

A1+

13 (+)

OUTPUT

14 (–)

12

14

The information in

parentheses in for

a DC output.

13

*

: Diode bridge

: Light emitting diode

17

G3RV-SR

Screw terminal

G3RV-SR700

Terminal Arrangement/

Internal Connection Diagram

(TOP VIEW)

12 VDC

78 max.

Input circuit

A1

3.4

74.5

G3RV

A2

65.89

35.18

18.71

A2–

INPUT

(5.05)

A1+

13 (+)

OUTPUT

14 (–)

12

14

The information in

parentheses in for

a DC output.

78.77

35.3

90 max.

13

24 VDC

Input circuit

A1

A2

(5.05)

18.71

35.18

51.65

56.2

G3RV

6.2 max.

A2–

INPUT

A1+

13 (+)

OUTPUT

14 (–)

12

14

The information in

parentheses in for

a DC output.

13

Other voltage

Input circuit

A1

A2

G3RV

A2–

INPUT

A1+

13 (+)

OUTPUT

14 (–)

12

14

The information in

parentheses in for

a DC output.

13

*

: Diode bridge

: Light emitting diode

18

G3RV-SR

Solid state relay for maintenance

Terminal Arrangement/

Internal Connection Diagram

(TOP VIEW)

G3RV-D03SL

G3RV-202S(L)

G3RV-D03SL (input circuit)

Input

30.5 max.

Load

33 max.

15.8

14 13

G3RV-202S(L) (input circuit)

Input

A1 A2

1.8

3.5

2.4

22

3

5.04

5.2 max.

Load

14 13

A1 A2

19

G2RV-SR/G3RV-SR

Safety Precautions

Be sure to read the Safety Precautions for All Relays in the website at the following URL:

www.omron247.com.

Format of Warning Indications

Minor burns may occasionally occur.

Indicates a potentially hazardous situation

which, if not avoided, will result in minor or

moderate injury, or may result in serious

injury or death. Additionally, there may be

significant property damage.

Do not touch the G3RV or the heat sink while the

power is being supplied or immediately after the

power supply has been turned OFF.

WARNING

The G3RV becomes extremely hot.

Provide a space of at least 3 mm between the G2RV-

SR and ground. Not doing so may result in a ground

fault.

Indicates a potentially hazardous situation

which, if not avoided, may result in minor or

moderate injury or in property damage.

CAUTION

Indicates supplementary comments on

what to do or avoid doing, to use the

product safety.

Precautions

for Safe Use

Precautions for Safe Use

Includes operating precautions to ensure

that the product will operate properly and

that performance and functions will not be

adversely affected.

Precautions

for Correct

Use

Transport

• Do not use the product if it has been dropped on the ground.

Dropping the product may adversely affect performance.

• Do not drop the product or subject it to abnormal vibration or shock

during transportation or mounting. Doing so may result in

deterioration of performance, malfunction, or failure.

• Do not transport the product without it being packaged. Doing so

may result in damage, malfunction, or failure.

• Do not transport the G3RV under the following conditions. Doing

so may result in damage, malfunction, or deterioration of

performance characteristics.

Meaning of Graphic Symbols for Ensuring Product Safety

Indicates the possibility of electric shock under

specific conditions.

Used for general CAUTION, WARNING, or

DANGER precautions for which there is no

specified symbol. (This symbol is also used as

the alerting symbol, but shall not be used in this

meaning on the product.)

• High temperature, high humidity conditions

• Conditions such as temperature change that causes rapid

condensation

Indicates the possibility of explosion or rupture

under specific conditions.

• Condition where it is not packaged

Indicates the possibility of injuries by high

temperature under specific conditions.

Operating and Storage Environments

• Do not use or store the product in the following locations. Doing so

may result in damage, malfunction, or deterioration of performance

characteristics.

WARNING

Ensure that the socket is not charged during wiring and

maintenance. Not doing so may result in electric shock.

• Do not store in locations subject to ambient storage

temperatures outside the range –40 to 70°C (for G2RV) and

outside the range –30 to 100°C (for G3RV).

• Locations subject to relative humidity outside the range 5% to

85% (for G2RV) and outside the range 45% to 85% (for G3RV).

• Locations subject to high temperature or high humidity.

• Conditions such as temperature change that causes rapid

condensation

Do not touch the terminal section of the G2RV-SR or

the surrounding area while the power is being

supplied. Doing so may result in electric shock.

CAUTION

• Locations where corrosive gases or flammable gases are present

• Location where rainwater or water droplets gets splashed

• Location with splashes of water, oil, and chemicals, etc.

• Locations with much dust, salt, and iron powder

• Location with blockers

Minor electrical shock may occasionally occur.

Do not touch the G3RV terminal section (i.e., current

carrying parts) while the power is being supplied.

• Where static electricity or noise occurs

The G3RV may rupture if short-circuit current flows.

As protection against accidents due to short-circuiting,

be sure to install protective devices, such as fuses and

no-fuse breakers, on the power supply side.

• Where strong electromagnetic field is generated

• Where there is a risk of exposure to radioactivity

• Do not use or store Sockets in environments that contain silicone

gas, sulfidizing gas (e.g., SO²or H2S), or organic gas, or near

materials that contain silicone. Doing so may cause the contacts to

be unstable or to fail.

Minor electrical shock may occasionally occur.

Do not touch the main circuit terminals on the G3RV

immediately after the power supply has been turned

OFF.

Shock may result due to the electrical charge stored

in the built-in snubber circuit.

Handling <G3RV>

• Keep the G3RV well ventilated.

There is a risk of short-circuiting or burning due to G3RV

overheating.

Note: G3RV-202S(L), G3RV-SR500/700-A(L) series

models only

20

G2RV-SR/G3RV-SR

Mounting

Precautions for Correct Use

• Before you start wiring, please make sure that the socket is

securely attached to the mounting rail. If the socket is unstable, it

may come loose with a risk of injury towards the workers.

• Please insert the flat-blade screwdriver to the bottom of the hole. If

you do not insert the flat-blade screwdriver correctly, the cable will

not be connected correctly.

• Do not use or store the product in the following locations. Doing so

may result in damage, malfunction, or deterioration of performance

characteristics.

• Where vibration or shock is directly transmitted to the body

• Do not use the product where the socket could touch a solvent

or alkaline agent.

• When lubricant such as oil is attached to the tip of the driver, the

driver will fall off, with a risk of injury towards the workers.

• Do not insert short bar in the hole for wire or screw driver, it may

cause the result of failure of pull out.

Usage

If insert short bar in the hole for wire or screw driver and try to pull

out, it may cause damage for short bar or socket.

• Please select the load within the rated range. Doing so may result

in damage, malfunction, or failure.

• Please use the power of the rated frequency. It may cause

malfunction, failure, or risk of burnout.

Push-In Plus Terminal Block

1. Connecting Wires to the Push-In Plus Terminal Block

Part Names of the Terminal Block

<G3RV>

• Install G3RV according to instructions Mounting on page 23. If you

install in the wrong direction, abnormal heat is generated, and may

lead to short-circuiting or burning the output element.

• G3RV is an SSR that generates heat. Please observe the ambient

temperature setting range of G3RV. If installing in an enclosed

space, set a fan, and ventilate.

Release hole

Terminal (Insertion) hole

• When mounting G3RV to DIN rail, firmly fit it into the groove. If it is

not properly installed, there is a risk of it falling.

Connecting Wires with Ferrules

Insert the ferrule straight into the terminal block until the end strikes

the terminal block.

Wiring

•

For the current to be applied, make sure a wire size with margin is used.

Otherwise, excessive heat generated by the wires may cause burning

.

Release hole

• Do not attempt to use the wire if the coat is torn. Not doing so may

result in electric shock.

Terminal

(Insertion) hole

• Always turn OFF the power supply before performing wiring. Not

doing so may cause electrical shock.

Ferrules

<G3RV>

Connecting Stranded Wires

• The wires of the socket for G3RV socket should not be passed

Use the following procedure to connect the wires to the terminal block.

(1) Hold a flat-blade screwdriver at an angle and insert it into the

release hole.

through the same duct as that being connected to the high-voltage

power supply. Otherwise, inductive noise may damage the G3RV

or cause it to malfunction.

The angle should be between 10°and15°. If the flat-blade

screwdriver is inserted correctly, you will feel the spring in the

release hole respond.

Push-In Plus Terminal Block

• Do not wire anything to the release holes.

(2) With the flat-blade screwdriver still inserted into the release hole,

insert the wire into the terminal hole until it strikes the terminal

block.

•

Do not tilt or twist a flat-blade screwdriver while it is inserted into a release

hole on the terminal block. The terminal block may be damaged

.

(3) Remove the flat-blade screwdriver from the release hole.

• Insert a flat-blade screwdriver into the release holes at an angle.

The terminal block may be damaged if you insert the screwdriver

straight in.

Flat-blade screwdriver

(3)

(1)

10 to 15°

(3)

• Do not allow the flat-blade screwdriver to fall out while it is inserted

into a release hole.

(1)

(2)

Stranded Wires

•

Do not bend the wire past its natural bending radius or pull on it

with excessive force. Doing so may cause the wire disconnection.

Checking Connections

• After insertion, pull gently on the wire to make sure that it will not

come out (i.e., to confirm that it is held by the terminal block).

• To prevent short circuits, insert the stripped part of a stranded

wire or the conductive part of a ferrule until it is hidden inside the

terminal insertion hole. (See following diagram.)

•

Do not insert more than one wire into each terminal (insertion) hole

.

• To prevent wiring materials from smoking or ignition, use the wiring

materials given in the following table.

Stripping length

Ferrules

When using

terminal

Ferrules

When not using

terminal

Recommended Wire

0.5 to 1.5 mm²/AWG20 to AWG16

10 mm

8 mm

Note: Use Ferrules with UL certification (R/C).

Disposal

• Do not dispose of the product by burning.

21

G2RV-SR/G3RV-SR

2. Removing Wires from the Push-In Plus Terminal Block

Use the following procedure to remove wires from the terminal block.

The same method is used to remove stranded wires and ferrules.

Screw Terminal

• Screw terminal

Applicable wire

size

Stripping

length

Wired type

(1) Hold a flat-blade screwdriver at an angle and insert it into the

release hole.

(2) With the flat-blade screwdriver still inserted into the release hole,

remove the wire from the terminal insertion hole.

(3) Remove the flat-blade screwdriver from the release hole.

Stranded wires, without

ferrule

0.5 to 1.5 mm²

8 mm

Stranded wires, with ferrule

and plastic collar

8 mm

Flat-blade screwdriver

Stranded wires with ferrule,

without plastic collar

(3)

(1)

10 to 15°

Wire

(3)

(1)

• Tightening Torque

0.4 N · m

(2)

• Electric wiring

Use the electric wire of specified size as shown above. The

3. Recommended ferrules and tools

Recommended Ferrules

stripped wire length is 8 mm.

Applicable

Recommended ferrules

Screw terminal

Ferrules

Conduct

length

wire

Phoenix

Contact

product

Weidmuller

product

(mm²) (AWG)

Wago product

(mm)

8 mm

0.5

0.75

1

20

18

16

8

AI0.5-8

H0.5/14

H0.75/14

H1.0/14

H1.5/14

FE-0.5-8N-WH

FE-0.75-8N-GY

FE-1.0-8N-RD

FE-1.5-8N-BK

Stripping length

AI0.75-8

AI1-8

<G2RV>

1.5

AI1.5-8

Operating latching lever

When operating the latching lever for G2RV-SR701/501

series, use a 2.5 mm width flat-blade screwdriver.

CRIMPFOX6

CRIMPFOX6T-F PZ6 roto

CRIMPFOX10S

Recommended crimp

tool

Variocrimp4

*1. Make sure that the outer diameter of the wire is smaller than the

inner diameter of the insulating sleeve of the recommended

ferrule.

• Applicable flat-blade screwdriver

Flat-blade screwdriver with parallel cutting edge: shaft diameter

2.5 mm (3.0 mm max.)

*2. Make sure that the ferrule processing dimensions conform to the

following figure.

Parallel cutting edge flat-blade screwdriver

8 mm

Shaft diameter 2.5 mm (3.0 mm max.)

Wide flat-blade screwdriver

8 mm

2.1 mm max.

Driver with a thick shaft cannot be used.

Recommended Flat-blade Screwdriver

Use a flat-blade screwdriver to connect and remove wires.

Use the following flat-blade screwdriver.

The following table is the manufacturer and format at the time in

December 2015.

• Always turn OFF the power supply before operating latching lever.

• Return to its original state after using the latching lever.

• Do not use the latching lever as a switch.

• Operation durability of the latching lever is 100 times or more.

• Do not keep the latching lever ON for a long period of time (24

hours or more) in order to maintain the operation check function.

Side

Front

2.5 mm dia.

0.4 mm

2.5 mm

Model

Manufacturer

XW4Z-00B

Omron

Wera

ESD0.40×2.5

SZF 0.4×2.5

Phoenix Contact

0.4×2.5×75 302

AEF.2.5×75

210-719

Wiha

Facom

Wago

SDI 0.4×2.5×75

Weidmuller

22

G2RV-SR/G3RV-SR

Method of operation of the latching lever

Incorrect Example

Countermeasure 1

Countermeasure 2

Recommended height of the duct is

Duct or other object

blocking airflow

Duct or other object

blocking airflow

Contact normal position

1/2 or less of the height of the SSR

Contact operating position (on-state)

Duct or

other object

blocking

airflow

Airflow

Height of SSR

Close protective cover

Open protective cover

Vertical

Direction

Metal

base

SSR

Duct or other object

blocking airflow

Duct or other object

blocking airflow

Duct or other object

blocking airflow

Do not enclose the SSR in a

duct of the same height.

It will interfere with the heat

dissipation of SSR.

Use ducts that have a

shallow depth, to provide a place the SSR on a metal base so

sufficient ventilation area. that it is not surrounded by the ducts.

If the ducts cannot be made lower,

Keep the protective cover open when using the latching lever. Move

until the latching lever clicks to the ON position (ON state). After

using the latching lever, in order to prevent malfunction, return the

switch to contact normal position (OFF state), and make sure the

protective cover is firmly closed.

Be aware of airflow

Duct or other object

blocking airflow

Using the latching lever

Exhaust

(Axial fan)

Example: check the operation of the relay and the sequence circuit

SSR

<G3RV>

• Since the G3RV uses electronic components, do not allow it to fall,

vibrate, or apply shock that exceeds the criteria. Doing so may

result in failure, malfunction, or deterioration of performance.

• Tighten screw terminal for G3RV with a torque of 0.4 N · m. It may

cause short-circuit failure or burning.

Inlet

• If the air inlet or air outlet has a filter, clean the filter regularly to

prevent it from clogging to ensure an efficient flow of air.

• Do not place objects that may obstruct the proper ventilation for

outside or inside the inlet or exhaust port, and in the outside

vicinity.

• Please use the voltage and current suitable for the input and output

terminal portion of G3RV. It may cause short-circuit failure or

burning.

Mounting

• A heat exchanger, if used, should be located in front of the G3RV

to ensure the efficiency of the heat exchanger.

Duct or other object blocking airflow

• Please observe the ambient temperature of G3RV. The rated

current of the G3RV is measured at an ambient temperature of

25°C.

60 mm min.

10 mm min.

SSR

• The G3RV uses a semiconductor in the output element.

This causes the temperature inside the control panel to increase

due to heating resulting from the flow of electrical current through

the load. The G3RV reliability can be increased by adding a

ventilation fan to the control panel to dispel this heat, thus lowering

the ambient temperature of the G3RV.

Vertical Direction

30 mm min.

(It suggests that life expectancy is doubled by each 10°C reduction

in ambient temperature.)

80 mm min.

EMI

The G3RV is a Class A product (for industrial environments).

When used in a residential environment, it may cause radio

interference. In such case, the user may be required to take

appropriate measures.

* When five or more are installed, install with 10 mm space between

each.

23

G2RV-SR/G3RV-SR

For G2RV-SR/G3VR-SR

Common Accessories (order separately)

Ordering Information

Short Bars

Maximum

energizing

current

No.of

poles

Minimum order

(Quantity)

Appearance

Pitch

Colors

Model *

2

PYDN-6.2-020@

PYDN-6.2-030@

PYDN-6.2-040@

PYDN-6.2-100@

PYDN-6.2-200@

3

Red (R),

Blue (S),

Yellow (Y)

6.2 mm

4

10

32 A

10

20

Note: Use for wiring to the adjacent socket.

* Replace the box (@) in the model number with the code for the covering color. @ color selection: R = red, S = blue, Y = yellow

Labels

Appearance

Model

Minimum order

5 sheets

(1 sheet/72 pieces)

XW5Z-P2.5LB2

Separate Plate

Appearance

Model

XW5Z-EP12

PLC interface unit

Appearance

I/O classification

Common process

Connection method

Push-In

Model

P2RVC-8-I-5-1

P2RVC-8-I-7-1

P2RVC-8-I-5

PNP

For input

Screw

NPN

PNP

NPN

Push-In

P2RVC-8-O-5-1

P2RVC-8-O-7-1

P2RVC-8-O-5

For output

Screw

Push-In

Parts for DIN Track Mounting

Minimum order

(Quantity)

Appearance

Type

Model

1 m

PFP-100N

DIN Tracks

–

0.5 m

PFP-50N

End Plate*

PFP-M

PFP-S

10

Spacer

* When mounting components to DIN rail, prevent sliding using end plates (Model PFP-M).

Refer to your OMRON website for details on PFP-@.

24

G2RV-SR/G3RV-SR

● Applicable Cables

Cable

length L

(mm)

Name

Appearance

Connecting Cables

Applicable Connectors

1,000

2,000

3,000

5,000

P2RV-A100C

P2RV-A200C

P2RV-A300C

P2RV-A500C

End A

Device

end

End B

PLC interface

unit end

Cables with Loose

Wires

P2RV-A@C

8 I/O

points

Various devices

L

70

1,000

2,000

3,000

5,000

1,000

2,000

3,000

5,000

1,000

2,000

3,000

5,000

P2RV-4-100C

P2RV-4-200C

Cables with

Connectors (1:4)

P2RV-4-@C

32 output

points

PLC I/O Units with MIL connectors (1:4)

CJ1W-OD232/OD262, etc.

P2RV-4-300C

P2RV-4-500C

P2RV-4-100IMC

P2RV-4-200IMC

P2RV-4-300IMC

P2RV-4-500IMC

P2RV-4-100IFC

P2RV-4-200IFC

P2RV-4-300IFC

P2RV-4-500IFC

L

300

Cables with

Connectors (1:4)

P2RV-4-@IMC

32 input

points

PLC I/O Units with MIL connectors (1:4)

CJ1W-ID232/ID262, etc.

Cables with

Connectors (1:4)

P2RV-4-@IFC

32 input

points

PLC I/O Units with Fujitsu connectors (1:4)

CJ1W-ID231/ID261, etc.

500

1,000

500

P2RV-A050C-OMR GRT1

P2RV-A100C-OMR GRT1

P2RV-A050IC-OMR GRT1

P2RV-A100IC-OMR GRT1

P2RV-A050C-OMR NX

P2RV-A100C-OMR NX

P2RV-A050IC-OMR NX

P2RV-A100IC-OMR NX

8 output

Cables with Connectors points

(1:1)

Slice I/O Units (1:1)

For inputs: GRT1-ID8-1

For outputs: GRT1-OD8-1

P2RV-A

@

C-OMR GRT1 8 input

points

L

1,000

500

8 output

points

Cables with

Connectors (1:1)

PLC I/O Units with MIL connectors (1:1)

For inputs: NX-ID4442

For outputs: NX-OD4256

1,000

500

P2RV-A@C-OMR NX 8 input

points

1,000

25

G2RV-SR/G3RV-SR

Cable

length L

(mm)

Name

Appearance

Connecting Cables

Applicable Connectors

500

P2RV-050C-SCH-A

P2RV-100C-SCH-A

P2RV-200C-SCH-A

P2RV-300C-SCH-A

P2RV-500C-SCH-A

P2RV-050C-SCH-B

P2RV-100C-SCH-B

P2RV-200C-SCH-B

P2RV-300C-SCH-B

P2RV-500C-SCH-B

P2RV-050C-SCH-C

P2RV-100C-SCH-C

P2RV-200C-SCH-C

P2RV-300C-SCH-C

P2RV-500C-SCH-C

P2RV-050C-SCH-D

P2RV-100C-SCH-D

P2RV-200C-SCH-D

P2RV-300C-SCH-D

P2RV-500C-SCH-D

P2RV-050C-SIM-A

P2RV-100C-SIM-A

P2RV-200C-SIM-A

P2RV-300C-SIM-A

P2RV-500C-SIM-A

P2RV-050C-SIM-B

P2RV-100C-SIM-B

P2RV-200C-SIM-B

P2RV-300C-SIM-B

P2RV-500C-SIM-B

End A

Device

end

End B

PLC interface

unit end

1,000

2,000

3,000

5,000

500

32 input

points

Schneider Electric PLCs with 32-point

connectors (1:4)

For inputs: 140 DDI 353 00

For outputs: 140 DDO 353 00

1,000

2,000

3,000

5,000

500

32 output

points

Schneider Electric

PLC Connecting

Cables

L

300

P2RV-@C-SCH-@

1,000

2,000

3,000

5,000

500

16 input

points

Schneider Electric PLCs with

16-point connectors (1:2)

For inputs: BMX DDI 1602

For outputs: BMX DDO 1602

1,000

2,000

3,000

5,000

500

16 output

points

L

300

1,000

2,000

3,000

5,000

500

32 input

points

Siemens PLCs with

32-point connectors (1:4)

For inputs: 6ES7 321-1BL00-0AA0

For outputs: 6ES7 322-1BL00-0AA0

1,000

2,000

3,000

5,000

32 output

points

L

300

500

P2RV-050C-SIM-C

P2RV-100C-SIM-C

P2RV-200C-SIM-C

P2RV-300C-SIM-C

P2RV-500C-SIM-C

1,000

2,000

3,000

5,000

Siemens PLC

16 input

Siemens PLCs with

16-point connectors (1:2)

For inputs: 6ES7 321-1BH02-0AA0

Connecting Cables

points

P2RV-@C-SIM-@

500

P2RV-050C-SIM-D

P2RV-100C-SIM-D

P2RV-200C-SIM-D

P2RV-300C-SIM-D

P2RV-500C-SIM-D

P2RV-050C-SIM-E

P2RV-100C-SIM-E

P2RV-200C-SIM-E

P2RV-300C-SIM-E

P2RV-500C-SIM-E

1,000

2,000

3,000

5,000

500

32 input

points

Siemens PLCs with

32-point connectors (1:4)

For inputs: 6ES7 421-1BL-0AA0

For outputs: 6ES7 422-1BL-0AA0

1,000

2,000

3,000

5,000

32 output

points

26

G2RV-SR/G3RV-SR

PLC interface unit

Ratings / characteristics

Rated voltage

Rated current

30 VAC/DC

0.5 A/poles, 2 A/unit

Ambient operating

temperature

−40 to 55°C

Electrical schematic

Input

P2RVC-8-I-@-1 (PNP)

P2RVC-8-I-5 (NPN)

1....................8

14

11

1

2

3

4

5

6

7

8

9

10

1

2

3

4

5

6

7

8

9

10

Output

P2RVC-8-O-@-1 (PNP)

P2RVC-8-O-5 (NPN)

1....................8

A2

A1

1

2

3

4

5

6

7

8

9

10

1

2

3

4

5

6

7

8

9

10

27

G2RV-SR/G3RV-SR

Dimensions

(unit: mm)

PLC interface unit

Push-IN

P2RVC-8-I-5(-1)

P2RVC-8-O-5(-1)

49.60

67.16

12.68

7×6.20

29

Screw

P2RVC-8-I-7-1

P2RVC-8-O-7-1

49.60

67.16

12.68

7×6.20

29

28

G2RV-SR/G3RV-SR

(Except for PLC interface unit)

Common Accessories

Dimensions

(unit: mm)

Short Bars

PYDN-6.2-@@ (6.2 mm)

Maximum carry

Pitch

No. of poles

L (Length)

Colors

Model *

current

2

3

12.4

18.6

24.8

62

PYDN-6.2-020@

PYDN-6.2-030@

PYDN-6.2-040@

PYDN-6.2-100@

PYDN-6.2-200@

2

1.20

9

L

Red (R)

Blue (S)

Yellow (Y)

6.2 mm

4

32 A

14

10

20

124

6.20

Note: Use the Short Bars for crossover wiring within one Socket or between Sockets.

* Replace the box (@) in the model number with the code for the covering color.

Separate Plate

XW5Z-EP12

56

12

63

Parts for DIN Track Mounting

Refer to your OMRON website for details on the PFP-@.

29

Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,

catalogs, manuals, brochures and other documents, whether electronic or in

writing, relating to the sale of products or services (collectively, the "Products")

by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron

objects to any terms or conditions proposed in Buyer’s purchase order or other

documents which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-

out notice by Omron. Omron reserves the right to increase or decrease prices

on any unshipped portions of outstanding orders. Payments for Products are

due net 30 days unless otherwise stated in the invoice.

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Omron further disclaims all warranties and responsibility of

any type for claims or expenses based on infringement by the Products or oth-

erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-

gation hereunder shall be, at Omron’s election, to (i) replace (in the form

originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying

Product, or (iii) repay or credit Buyer an amount equal to the purchase price of

the non-complying Product; provided that in no event shall Omron be responsi-

ble for warranty, repair, indemnity or any other claims or expenses regarding

the Products unless Omron’s analysis confirms that the Products were prop-

erly handled, stored, installed and maintained and not subject to contamina-

tion, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the

use of Products in combination with any electrical or electronic components,

circuits, system assemblies or any other materials or substances or environ-

ments. Any advice, recommendations or information given orally or in writing,

are not to be construed as an amendment or addition to the above warranty.

See http://www.omron247.com or contact your Omron representative for pub-

lished information.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices

sent to Buyer after deducting transportation charges, taxes and duties, and will

be allowed only if (i) the invoice is paid according to Omron’s payment terms

and (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or

the maximum legal rate, whichever is less, on any balance not paid within the

stated terms.

5. Orders. Omron will accept no order less than $200 net billing.

6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE

imposed directly or indirectly on Omron or required to be collected directly or

indirectly by Omron for the manufacture, production, sale, delivery, importa-

tion, consumption or use of the Products sold hereunder (including customs

duties and sales, excise, use, turnover and license taxes) shall be charged to

and remitted by Buyer to Omron.

FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS

BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual

price of the Product on which liability is asserted.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Omron may (without liabil-

ity and in addition to other remedies) cancel any unshipped portion of Prod-

ucts sold hereunder and stop any Products in transit until Buyer pays all

amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all

unpaid accounts.

their employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Omron is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any way with respect to the Products. Without limiting the foregoing, Buyer (at

its own expense) shall indemnify and hold harmless Omron and defend or set-

tle any action brought against such Companies to the extent based on a claim

that any Product made to Buyer specifications infringed intellectual property

rights of another party.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

sive property of Omron Companies and Buyer shall not attempt to duplicate it

in any way without the written permission of Omron. Notwithstanding any

charges to Buyer for engineering or tooling, all engineering and tooling shall

remain the exclusive property of Omron. All information and materials supplied

by Omron to Buyer relating to the Products are confidential and proprietary,

and Buyer shall limit distribution thereof to its trusted employees and strictly

prevent disclosure to any third party.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:

a.Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.

b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and

constitute delivery to Buyer;

licenses regarding (i) export of products or information; (iii) sale of products to

“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of

regulated technology or information.

c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shall

pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right

est in the Products until the full purchase price is paid;

d.Delivery and shipping dates are estimates only; and

e.Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.

and no course of dealing between Buyer and Omron shall operate as a waiver

of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder

without Omron's written consent. (c) Law. These Terms are governed by the

law of the jurisdiction of the home office of the Omron company from which

Buyer is purchasing the Products (without regard to conflict of law princi-

ples). (d) Amendment. These Terms constitute the entire agreement between

Buyer and Omron relating to the Products, and no provision may be changed

or waived unless in writing signed by the parties. (e) Severability. If any provi-

sion hereof is rendered ineffective or invalid, such provision shall not invalidate

any other provision. (f) Setoff. Buyer shall have no right to set off any amounts

against the amount owing in respect of this invoice. (g) Definitions. As used

herein, “including” means “including without limitation”; and “Omron Compa-

nies” (or similar words) mean Omron Corporation and any direct or indirect

subsidiary or affiliate thereof.

12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writing

to Omron within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the

Products will be free from defects in materials and workmanship for a period of

twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

Certain Precautions on Specifications and Use

1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of the

Product in the Buyer’s application or use of the Product. At Buyer’s request,

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-

ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the

ratings and limitations of use which apply to the Product. This information by

itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs

user’s programming of a programmable Product, or any consequence thereof.

uct in combination with the end product, machine, system, or other application

or use. Buyer shall be solely responsible for determining appropriateness of

the particular Product with respect to Buyer’s application, product or system.

Buyer shall take application responsibility in all cases but the following is a

non-exhaustive list of applications for which particular attention must be given:

and other materials is provided as a guide for the user in determining suitabil-

ity and does not constitute a warranty. It may represent the result of Omron’s

test conditions, and the user must correlate it to actual application require-

ments. Actual performance is subject to the Omron’s Warranty and Limitations

of Liability.

(i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be

interference, or conditions or uses not described in this document.

(ii) Use in consumer products or any use in significant quantities.

(iii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety equip-

ment, and installations subject to separate industry or government regulations.

(iv) Systems, machines and equipment that could present a risk to life or prop-

erty. Please know and observe all prohibitions of use applicable to this Prod-

uct.

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Omron’s representative at any time

to confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has been

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors or omissions.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT

ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON CANADA, INC. • HEAD OFFICE

Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ARGENTINA • SALES OFFICE

Cono Sur • 54.11.4783.5300

OMRON ELECTRONICS DE MEXICO • HEAD OFFICE

México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com

OMRON CHILE • SALES OFFICE

Santiago • 56.9.9917.3920

OMRON ELECTRONICS DE MEXICO • SALES OFFICE

Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com

OTHER OMRON LATIN AMERICA SALES

54.11.4783.5300

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE

São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu

Authorized Distributor:

Controllers & I/O

• Machine Automation Controllers (MAC) • Motion Controllers

• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O

Robotics

• Industrial Robots • Mobile Robots

Operator Interfaces

• Human Machine Interface (HMI)

Motion & Drives

• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems

• Frequency Inverters

Vision, Measurement & Identification

• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems

Sensing

• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors

• Rotary Encoders • Ultrasonic Sensors

Safety

• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems

• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices

• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays

Control Components

• Power Supplies • Timers • Counters • Programmable Relays

• Digital Panel Meters • Monitoring Products

Switches & Relays

• Limit Switches • Pushbutton Switches • Electromechanical Relays

• Solid State Relays

Software

• Programming & Configuration • Runtime

J285I-E-01 06/16

Note: Specifications are subject to change.

Printed in U.S.A.

Printed on recycled paper.


型号：	G3RV-SR700-AAC/DC24
厂家：	OMRON ELECTRONICS LLC
描述：	Global standard size, low profile slim (6.2 mm width) I/O relays
文件：	总31页 (文件大小：2878K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

G3RV-SR700-AAC/DC24 [OMRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E