G5A-234P-DC6 [OMRON]

Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 6VDC (Coil), 200mW (Coil), 1A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;


型号：	G5A-234P-DC6
厂家：	OMRON ELECTRONICS LLC
描述：	Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 6VDC (Coil), 200mW (Coil), 1A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管继电器
文件：	总8页 (文件大小：176K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

G^Low5^SigA^{nal Relay}

• Subminiature 8.40 H x 9.90 W x 16 L mm

(0.33 H x 0.38 W x 0.63 L in).

• Unique moving magnet armature reduces relay size,

magnetic interference, and contact bounce time.

• Low nominal power consumption (200 mW).

• Bifurcated crossbar contact assures highly reliable

switching of loads as low as 10 mVDC, 0.1 mA

(reference value).

• Automatic flow or dip soldering possible.

• Available in standard, high-sensitivity, high-dielectric

(FCC part 68), low thermoelectromotive force, and

ultrasonic cleaning versions.

• Highly stable magnetic circuit for latching endurance and

excellent resistance to vibration and shock.

• Single or double coil winding types available.

Ordering Information

To Order: Select the part number and add the desired coil voltage rating (e.g., G5AU-234P-DC12).

■ Non-Latching

Type

Contact form

Construction

Semi-sealed

Model

Standard

DPDT

G5A-237P

Sealed

G5A-234P

High-sensitivity

FCC part 68

Semi-sealed

Sealed

G5A-237PH

G5A-234PH

G5A-237P-FC

G5A-234P-FC

Semi-sealed

Sealed

Note: High-sensitivity versions of the FC type are also available.

■ Latching

Type

Contact form

DPDT

Construction

Semi-sealed

Model

Double-winding latching

Single-winding latching

G5AU-237P

Standard

G5AK-237P

Sealed

G5AU-234P

G5AK-234P

High-sensitivity

FCC part 68

Semi-sealed

Sealed

G5AU-237PH

G5AU-234PH

G5AU-237P-FC

G5AU-234P-FC

Semi-sealed

Sealed

G5AK-237P-FC

G5AK-234P-FC

108

Low Signal Relay G5A

Specifications

■ Contact Data

Load

Resistive load (p.f. = 1)

0.50 A at 30 VAC, 1 A at 30 VDC

Ag (Au clad)

Inductive load (p.f. = 0.4) (L/R = 7 ms)

Rated load

0.10 A at 30 VAC, 0.20 A at 30 VDC

Contact material

Carry current

1 A

Max. operating voltage

Max. operating current

Max. switching capacity

Min. permissible load

125 VAC, 125 VDC

1 A (AC) 1 A (DC)

37.50 VA, 33 W

0.50 A (AC) 0.50 A (DC)

12.50 VA 11 W

10 µA, 10 mVDC

■ Coil Data

Standard Non-latching and FCC Part 68 Type (G5A-237P, G5A-234P, G5A-237P-FC, G5A-234P-FC)

Ratedvoltage Rated current

(VDC) (mA)

Coil

resistance

(Ω)

Coil inductance

(ref. value) (H)

Pick-up

voltage

Dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature

OFF

Armature

% of rated value

125

0.13

0.17

0.43

0.71

2.76

7.44

0.12

70% max

10% min.

150%

Approx. 200

33.30

22.20

16.70

8.30

180

0.16

0.40

0.68

2.70

7.25

405

720

2,880

8,230

5.80

Approx. 280

High-sensitivity Non-latching Type (G5A-237PH, G5A-234PH)

Ratedvoltage Rated current

(VDC) (mA)

Coil

resistance

(Ω)

Coil inductance

(ref. value) (H)

Pick-up

voltage

Dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature

OFF

Armature

% of rated value

167

0.17

0.22

0.58

0.16

80% max.

10% min.

180%

Approx. 150

240

0.21

0.54

0.96

3.80

16.70

12.50

6.50

540

960

3,700

3.90

Single-winding Latching Type. Standard and FCC Part 68 Version (G5AU-237P, G5AU-234P, G5AU-237P-FC, G5AU-234P-FC)

Ratedvoltage Rated current

(VDC) (mA)

Coil

resistance

(Ω)

Coil inductance

(ref. value) (H)

Set pick-up

voltage

Reset

dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature

OFF

Armature

% of rated value

66.70

0.02

0.06

0.08

0.17

0.29

1.10

0.02

80% max.

80% min.

200%

Approx. 200

125

180

405

720

2,880

0.05

0.07

0.14

0.24

0.85

33.30

22.20

16.70

8.30

Low Signal Relay G5A

109

Double-winding Latching Type. Standard and FCC Part 68 Version (G5AK-237P, G5AK-234P, G5AK-237P-FC, G5AK-234P-FC)

Ratedvoltage Rated current

(VDC) (mA)

Coil

resistance

(Ω)

Coil inductance

(ref. value) (H)

Set pick-up

voltage

Reset

dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature

OFF

Armature

% of rated value

66.70

0.02

0.06

0.08

0.17

0.29

1.10

0.02

80% max.

200% max.

Approx. 200

125

0.05

0.07

0.14

0.24

0.85

33.30

22.20

16.70

8.30

180

405

720

2,880

Single-winding Latching Type. High-sensitivity Version (G5AU-237PH, G5AU-234PH)

Ratedvoltage Rated current

(VDC) (mA)

Coil

resistance

(Ω)

Coil inductance

(ref. value) (H)

Set pick-up

voltage

Reset

dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature

OFF

Armature

% of rated value

250

80% max.

200% max.

Approx. 200

16.70

11.10

8.40

360

810

1,440

5,760

4.20

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of 10%.

2. The operating characteristics are measured at a coil temperature of 23°C (73°F).

■ Characteristics

Type

Non-latching

Latching

Contact resistance

Operate (set) time

Release (reset) time

Bounce time

50 mΩ max.

5 ms. max. (mean value approx 2.4 ms)

5 ms. max. (mean value approx. 1.1 ms)

Approx. 0.5 ms

5 ms. max. (mean value opprox. 2.0 ms)

5 ms. max. (mean value approx. 1.8 ms)

Operate

Release

Approx. 0.5 ms

Operating

frequency

Mechanical

Electrical

36,000 operations/hour

18,000 operations/hour (under rated load)

1,000 mΩ min. (at 500 VDC)

Insulation resistance

1,000 mΩ min. (at 250 VDC)

Dielectric strength --

Standard

1,000 VAC, 50/60 Hz for 1 minute between coil and contacts

1,000 VAC, 50/60 Hz for 1 minute between contacts of different poles

500 VAC, 50/60 Hz for 1 minute between contacts of same pole

750 VAC, 50/60 Hz for 1 minute between contacts of same pole

Set and reset coils

250 VAC, 50/60 Hz for 1 minute

Vibration

Shock

Mechanical durability 10 to 55 Hz; 1.50 mm (0.06 in) double amplitude

Malfunction durability Malfunction durability10 to 55 Hz; 1.50 mm (0.06 in) double amplitude

Mechanical durability Approx. 100 G

Malfunction durability Approx. 30 G

Ambient temperature

Humidity

-40 to 70°C (-40 to 158°F)

45% to 85% RH

Service life

Mechanical

Electrical

50 million operations min.

(at 18,000 operations/hour)

1 million operations min.

(at 18,000 operations/hour)

See “Characteristic Data”

Approx. 3 g (0.11 oz)

Weight

Note: Data shown are of initial value.

110

Low Signal Relay G5A

■ Characteristic Data

Maximum Switching Capacity

Electrical Service Life

Ambient Temperature vs.

Maximum Voltage (reference only)

Dimensions

Unit: mm (inch)

■ Non-latching

G5A-237P, G5A-237PH, G5A-237P-FC

Internal connections

(Bottom view)

Footprint

(Bottom view)

G5A-234P, G5A-234PH, G5A-234P-FC

Internal connections

(Bottom view)

Footprint

(Bottom view)

Note: 1.

and

indicate mounting orientation marks.

Low Signal Relay G5A

111

■ Latching

G5AU-237P, G5AU-237PH, G5AU-237P-FC

Internal connections

(Bottom view)

Footprint

(Bottom view)

G5AK-237P, G5AK-237PH, G5AK-237P-FC

G5AU-234P, G5AU-234PH, G5AU-234P-FC

G5AK-234P, G5AK-234PH, G5AK-234P-FC

Internal connections

Footprint

(Bottom view)

Internal connections

(Bottom view)

Footprint

(Bottom view)

Internal connections

(Bottom view)

Footprint

(Bottom view)

Note: 1.

and

indicate mounting orientation marks.

112

Low Signal Relay G5A

■ Approvals

UL (File No. E41515)/CSA (File No. LR24825)

Type

G5A-234P

G5A-234PH

Contact form

DPDT

Coil ratings

1.5 to 48 VDC

Contact ratings

0.5 A, 60 VAC

1 A, 30 VDC

G5A-234P-FC

G5A-237P

G5A-237PH

G5A-237P-FC

G5AU-237P

0.5 A, 60 VAC

0.5 A, 60 VDC

1 A, 30 VDC

G5AU-237PH

G5AU-237P-FC

G5AK-237P

G5AK-237P-FC

G5AU-234P

G5AU-234PH

G5AU-234P-FC

G5AK-234P

G5AK-234P-FC

Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics

individually defined in this catalog.

2. In the interest of product improvement, specifications are subject to change.

Hints on Correct Use

Single-winding type (G5AU)

Example of low-power drive circuit

1. The figure below shows a drive circuit (JAPAN PAT. NO. 1239293)

in which the latching relay can function like a general-purpose

relay from a normal input pulse for switching.

2. Use a charging current of capacitor C to operate the latching

relay, which flows suddenly through diode D1, capacitor C, latch-

ing relay, and diode D2, and the relay contacts will be put in the

locked state.

3. Use a discharging current of capacitor C to release the latching

relay, which flows through transistor TR, capacitor C, and the

latching relay.

Note: 1. When applying the relay for practical use, make sure of the

set or reset state of the relay; then determine the circuit con-

straints.

2. Because OMRON possesses the patent of this drive circuit,

contact OMRON when adopting it.

Low Signal Relay G5A

113

Certain Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the

part of all catalogs, manuals or other documents, whether electronic or in writ-

ing, relating to the sale of goods or services (collectively, the "Goods") by

Omron Electronic Components LLC and its subsidiary companies ("Seller").

Seller hereby objects to any terms or conditions proposed in Buyer's purchase

order or other documents which are inconsistent with, or in addition to, these

Terms. Please contact your Omron representative to confirm any additional

terms for sales from your Omron company.

Goods will be free from defects in materials and workmanship for a period of

twelve months from the date of sale by Seller (or such other period expressed

in writing by Seller). Seller disclaims all other warranties, express or implied.

(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR

A PARTICULAR PURPOSE OF THE GOODS.

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Seller further disclaims all warranties and responsibility of

any type for claims or expenses based on infringement by the Goods or other-

wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga-

tion hereunder shall be to replace (in the form originally shipped with Buyer

responsible for labor charges for removal or replacement thereof) the non-

complying Good or, at Seller's election, to repay or credit Buyer an amount

equal to the purchase price of the Good; provided that in no event shall Seller

be responsible for warranty, repair, indemnity or any other claims or expenses

regarding the Goods unless Seller's analysis confirms that the Goods were

properly handled, stored, installed and maintained and not subject to contami-

nation, abuse, misuse or inappropriate modification. Return of any goods by

Buyer must be approved in writing by Seller before shipment. Seller shall not

be liable for the suitability or unsuitability or the results from the use of Goods

in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any

advice, recommendations or information given orally or in writing, are not to be

construed as an amendment or addition to the above warranty.

2. Prices. All prices stated are current, subject to change without notice by

Seller. Buyer agrees to pay the price in effect at time of shipment.

3. Discounts. Cash discounts, if any, will apply only on the net amount of

invoices sent to Buyer after deducting transportation charges, taxes and

duties, and will be allowed only if (i) the invoice is paid according to Seller's

payment terms and (ii) Buyer has no past due amounts owing to Seller.

4. Orders. Seller will accept no order less than $200 net billing.

5. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Goods.

6. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Seller or required to be collected directly or

indirectly by Seller for the manufacture, production, sale, delivery, importation,

consumption or use of the Goods sold hereunder (including customs duties

and sales, excise, use, turnover and license taxes) shall be charged to and

remitted by Buyer to Seller.

7. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Seller, Seller reserves the right to stop shipments or require satisfactory 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI-

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Seller may (without liability

and in addition to other remedies) cancel any unshipped portion of Goods sold

hereunder and stop any Goods in transit until Buyer pays all amounts, includ-

ing amounts payable hereunder, whether or not then due, which are owing to it

by Buyer. Buyer shall in any event remain liable for all unpaid accounts.

8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Seller fully against all costs or expenses arising in

connection therewith.

RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-

TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE

GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,

NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of

Seller exceed the individual price of the Good on which liability is asserted.

14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and

its employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Seller is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any way with respect to the Goods. Without limiting the foregoing, Buyer (at

its own expense) shall indemnify and hold harmless Seller and defend or settle

any action brought against Seller to the extent that it is based on a claim that

any Good made to Buyer specifications infringed intellectual property rights of

another party.

15. Property; Confidentiality. The intellectual property embodied in the Goods is

the exclusive property of Seller and its affiliates and Buyer shall not attempt to

duplicate it in any way without the written permission of Seller. Notwithstand-

ing any charges to Buyer for engineering or tooling, all engineering and tooling

shall remain the exclusive property of Seller. All information and materials

supplied by Seller to Buyer relating to the Goods are confidential and propri-

etary, and Buyer shall limit distribution thereof to its trusted employees and

strictly prevent disclosure to any third party.

16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right

and no course of dealing between Buyer and Seller shall operate as a waiver

of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder

without Seller's written consent. (c) Amendment. These Terms constitute the

entire agreement between Buyer and Seller relating to the Goods, and no pro-

vision may be changed or waived unless in writing signed by the parties.

(d) Severability. If any provision hereof is rendered ineffective or invalid, such

provision shall not invalidate any other provision. (e) Setoff. Buyer shall have

no right to set off any amounts against the amount owing in respect of this

invoice. (f) As used herein, "including" means "including without limitation".

9. Force Majeure. Seller shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:

a. Shipments shall be by a carrier selected by Seller;

b. Such carrier shall act as the agent of Buyer and delivery to such carrier

shall constitute delivery to Buyer;

c. All sales and shipments of Goods shall be FOB shipping point (unless oth-

erwise stated in writing by Seller), at which point title to and all risk of loss of

the Goods shall pass from Seller to Buyer, provided that Seller shall retain a

security interest in the Goods until the full purchase price is paid by Buyer;

d. Delivery and shipping dates are estimates only.

e. Seller will package Goods as it deems proper for protection against normal

handling and extra charges apply to special conditions.

11. Claims. Any claim by Buyer against Seller for shortage or damage to the

Goods occurring before delivery to the carrier must be presented in writing to

Seller within 30 days of receipt of shipment and include the original transporta-

tion bill signed by the carrier noting that the carrier received the Goods from

Seller in the condition claimed.

Certain Precautions on Specifications and Use

1. Suitability of Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro

dards, codes or regulations which apply to the combination of the Good in the

gramming of a programmable Good, or any consequence thereof.

Buyer's application or use of the Good. At Buyer's request, Seller will provide 3. Performance Data. Performance data given in this catalog is provided as a

applicable third party certification documents identifying ratings and limitations

of use which apply to the Good. This information by itself is not sufficient for a

complete determination of the suitability of the Good in combination with the

end product, machine, system, or other application or use. The following are

guide for the user in determining suitability and does not constitute a warranty

It may represent the result of Seller's test conditions, and the user must corre

late it to actual application requirements. Actual performance is subject to the

Seller's Warranty and Limitations of Liability.

some examples of applications for which particular attention must be given. 4. Change in Specifications. Product specifications and accessories may be

This is not intended to be an exhaustive list of all possible uses of this Good,

nor is it intended to imply that the uses listed may be suitable for this Good:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

changed at any time based on improvements and other reasons. It is our prac

tice to change part numbers when published ratings or features are changed

or when significant construction changes are made. However, some specifica

tions of the Good may be changed without any notice. When in doubt, specia

part numbers may be assigned to fix or establish key specifications for you

application. Please consult with your Seller's representative at any time to con

firm actual specifications of purchased Good.

5. Errors and Omissions. The information in this catalog has been carefully

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors, or omissions.

(iii) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to

this Good.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR

THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.ca

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

OMRON CANADA, INC.

885 Milner Avenue

Toronto, Ontario M1B 5V8

416-286-6465

847-882-2288

Cat. No. GC RLY8A

8/04

Specifications subject to change without notice

Printed in USA

G5A-234P-DC6 [OMRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E