G6K-2P-TR-DC5 [OMRON]

Power/Signal Relay;


型号：	G6K-2P-TR-DC5
厂家：	OMRON ELECTRONICS LLC
描述：	Power/Signal Relay
文件：	总10页 (文件大小：1056K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

G^Low6^SigK^{nal Relay}

• Compact fourth generation design, offers excellent board

space savings.

• Available in 2.54 and 3.2 mm coil-contact terminal spacing.

• “-Y” models meet 2.5 kV Bellcore surge requirements.

• Conforms to FCC Part 68.

• Terminal design based on Omron’s successful G6S relay.

• Available in PCB through-hole, SMT gullwing and SMT

“inside-L” terminals.

• UL recognized / CSA certified.

• Available in single coil latching.

• RoHS Compliant.

Ordering Information

To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-DC5).

Terminal

Contact form

Model

Non-latching

2.54 mm spacing

Non-latching

3.2 mm coil-contact

terminal spacing

Single coil latching

3.2 mm coil-contact

terminal spacing

Gullwing

DPDT

G6K-2F

G6K-2F-Y

G6KU-2F-Y

Inside “L”

G6K-2G

G6K-2P

G6K-2G-Y

G6K-2P-Y

G6KU-2G-Y

G6KU-2P-Y

PCB through-hole

When ordering tape packing (surface mount versions), add “-TR” to the model number (e.g., G6K-2G-TR-DC5)

Specifications

■ Contact Data

Load

Resistive load (cosφ=1)

0.3 A at 125 VAC

1 A at 30 VDC

Ag (Au clad)

Rated load

Contact material

Max. carry current

1 A

Max. operating voltage

Max. operating current

Max. switching capacity

Min. permissible load (See note)

125 VAC, 60 VDC

1 A

37.5 VA, 30W

10 μA at 10 mVDC

Note: This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary

depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.

Low Signal Relay G6K

■ Coil Data

G6K- 2.5 mm coil-contact terminal spacing, standard, non-latching (G6K-2F, G6K-2G, G6K-2P)

G6K- 3.2 mm coil-contact terminal spacing, non-latching (G6K-2F-Y, G6K-2G-Y, G6K-2P-Y)

Rated voltage Rated current Coil resistance

(VDC) (mA) (Ω)

Pick-up voltage

Dropout voltage

% of rated value

10% min.

Maximum voltage Powerconsumption

(mW)

33.0

23.2

21.1

17.6

11.3

9.1

80% max.

150% max.

Approx. 100

@ 23°C to 70°C

4.5

194

237

341

795

1,315

5,220

4.6

G6KU- 3.2 mm spacing, single coil latching (G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y)

Rated voltage Rated current Coil resistance

(VDC) (mA) (Ω)

Set-up voltage

Reset voltage

% of rated value

75% min.

Maximum voltage Powerconsumption

(mW)

33.0

23.2

21.1

17.6

11.3

9.1

75% max.

150% max.

Approx. 100

@ 23°C to 70°C

4.5

194

237

341

795

1,315

5,220

4.6

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of 10%.

2. The operating characteristics are measured at a coil temperature of 23°C unless otherwise specified.

3. Pick-up voltage will vary with temperature

4. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.

■ Characteristics

Contact resistance (See note 1)

Operate (set) time (See note 2)

Release (set) time (See note 2)

Insulation resistance (See note 3)

Dielectric strength

100 mΩ max.

3 ms max. (Approx. 1.4 ms - standard. Approx. 1.2 ms - latching)

3 ms max. (Approx. 1.3 ms - standard. Approx. 1.2 ms - latching)

1,000 MΩ min. (at 500 VDC)

1,500 VAC for 1 minute between coil contacts

1,000 VAC for 1 minute between contacts of different poles

750 VAC for 1 minute between contacts of the same pole

2,500 V, (2 x 10 μs) between coil and contacts.

(Conforms to Bellcore specifications)

Surge withstand voltage “-Y’ versions

Standard versions

1,500 V, (10 x 160 μs) between coil and contacts / contacts of different and same polarity.

(Conforms to FCC Part 68)

Vibration

Shock

Mechanical durability 10 to 55 Hz; 5.0 mm double amplitude

Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude

1,000 m/s²(approx. 100G)

750 m/s²(approx. 75G)

Mechanical durability

Malfunction durability

Ambient temperature

Humidity

-40°C to 70°C with no icing or condensation

5 to 85% RH

Service life

Mechanical

Electrical

50,000,000 operations min. (at 36,000 operations per hour)

100,000 operations min. at rated load (at 1,800 operations per hour)

Approx. 0.7 g

Weight

Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.

2. Values in parentheses are typical values unless otherwise stated.

3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those for checking the dielectric strength.

4. Data shown are of initial value.

Low Signal Relay G6K

■ Characteristic data

Maximum Switching Capacity

Ambient Temperature vs.

Maximum Coil Voltage

Ambient Temperature vs.

Switching Current

AC resistive load

DC resistive load

Ambient temperature (°C)

Rated operating voltage (V)

Note: The maximum coil voltage refers to the maxi-

mum value in a varying range of operating

power voltage, not a continuous voltage.

Ambient Temperature vs. Must

Electrical Service Life

Ambient Temperature vs. Must

Operate or Must Release Voltage

G6K-2G (F/P), G6K-2G (F/P)-Y

Set or Must Reset Voltage

G6KU-2G (F/P)-Y

Max. estimated value

30 VDC resistive load

Ambient temperature: 23°C

Switching frequency:

1,800 operations/hour

125 VAC resistive load

Ambient temperature: 23°C

Switching frequency:

1,800 operations/hour

Operate voltage

Release voltage

Ambient temperature (°C)

Rated operating current (A)

Electrical Service Life

Shock Malfunction

Electrical Service Life

(Contact Resistance) (See note.)

G6K-2G (F/P), G6K-2G (F/P)-Y

(with Must Operate and Must

Release Voltage) (See note.)

G6K-2G (F/P), G6K-2G (F/P)-Y

Energized

Sample: G6K-2G

contact

Not

energized

Number of Relays: 10

contact

Test conditions: 1 A resistive load at

30 VDC with an operation rate of 50%

Switching frequency: 1,800 operations/h

Test conditions: 1 A resistive load

at 30 VDC with an operation rate of 50%

Switching frequency: 1,800 operations/h

Must operate

Contact resistance

Shock direction

Unit: m/s ²

Sample: G6K-2G

Number of Relays: 10

Must release

Conditions: Shock is applied in X, Y, and Z di

rections three times each with and with

out energizing the Relays to check the

number of contact malfunctions.

Operating frequency (x10³operations)

Operating frequency (x10 operations)

Note: The tests were conducted at an

ambient temperature of 23°C.

Note: The tests were conducted at an

ambient temperature of 23°C.

Low Signal Relay G6K

Mutual Magnetic Interference

G6K-2G (F/P), G6K-2G (F/P)-Y

Mutual Magnetic Interference

G6K-2G (F/P), G6K-2G (F/P)-Y

Contact Reliability Test (See note.)

G6K-2G (F/P), G6K-2G (F/P)-Y

Must operate voltage

Must release voltage

Must operate voltage

Must release voltage

Sample: G6K-2G

Initial stage

Test

contact

Number of Relays: 10

Initial stage

Test

Test conditions: 10 mA resistive load at

10 mVDC with an operation rate of 50 %

Switching frequency: 7,200 operations/h

contact

Sample

Not energized

Average value

Test

Average value

Initial stage

Test

Sample

Energized

Average value

Operating frequency (x10³operations)

Note 1: The test was conducted at an ambient temperature of 23°C.

2: The contact resistance data are periodically measured reference values and are not values from each monitoring operation.

Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check

operation under the actual operating conditions before use.

External Magnetic Interference

G6K-2G (F/P), G6K-2G (F/P)-Y

(Average value)

Sample: G6K-2G

Number of Relays: 10

Sample: G6K-2G

Number of Relays: 10

Must operate voltage

Must release voltage

Must operate voltage

Must release voltage

Sample: G6K-2G

Number of Relays: 10

Must operate voltage

Must release voltage

External magnetic field (A/m)

High-frequency Characteristics High-frequency Characteristics High-frequency Characteristics

(Isolation)

G6K-2G (F/P), G6K-2G (F/P)-Y

(Insertion Loss)

G6K-2G (F/P), G6K-2G (F/P)-Y

(Return Loss)

G6K-2G (F/P),G6K-2G (F/P)-Y

(Average value)

100

1.4

Sample: G6K-2G

Number of Relays: 10

1.35

1.3

0.1

1.25

1.2

0.2

0.3

0.4

0.5

Return loss

1.15

1.1

1.05

Sample: G6K-2G

Number of Relays: 10

V.SWR

100

Frequency (MHz)

Note: 1. The tests were conducted at an ambient temperature of 23°C.

2. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics including

endurance in the actual machine before use.

Low Signal Relay G6K

Must Operate and Must Release Must Operate and Must Release

Vibration Resistance

G6K-2G (F/P), G6K-2G (F/P)-Y

Time Distribution (See note.)

Bounce Time Distribution (See note.)

G6K-2G (F/P) , G6K-2G (F/P)-Y

G6K-2G (F/P), G6K-2G (F/P)-Y

Sample: G6K-2G

Must operate

bounce time

Must release

bounce time

Must operate

Number of Relays:

Must release time

Must operate voltage

Must release voltage

Sample: G6K-2G

Number of Relays: 50

After test

Time (ms)

Note: The tests were conducted at an ambient temperature of 23°C.

■ Approvals

UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C

Contact form

Coil rating

3 to 24 VDC

Contact ratings

Number of test operations

6,000

DPDT

1 A at 30 VDC (Resistive)

0.5 A at 60 VDC (Resistive)

0.3 A at 125 VAC (General Use)

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Mounting Dimensions (Top View)

Tolerance: 0.1 mm

Terminal Arrangement/

Internal Connections

(Top View)

G6K-2F

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Top View) Terminal Arrangement/

G6K-2G

G6K-2P

Internal Connections

(Top View)

Tolerance: 0.1 mm

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Bottom View)

Terminal Arrangement/

Internal Connections

(Bottom View)

Tolerance: 0.1 mm

Eight, 0.8-dia. holes

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Low Signal Relay G6K

Mounting Dimensions (Top View)

Tolerance: 0.1 mm

Terminal Arrangement/

Internal Connections

(Top View)

G6K-2F-Y

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Top View)

Tolerance: 0.1 mm

Terminal Arrangement/

Internal Connections

(Top View)

G6K-2G-Y

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Bottom View) Terminal Arrangement/

Internal Connections

(Bottom View)

Tolerance: 0.1 mm

G6K-2P-Y

Eight,

0.8-dia. holes

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Terminal Arrangement/

Internal Connections

(Top View)

Mounting Dimensions (Top View)

Tolerance: 0.1 mm

G6KU-2F-Y

G6KU-2G-Y

G6KU-2P-Y

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Top View)

Tolerance: 0.1 mm

Terminal Arrangement/

Internal Connections

(Top View)

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Mounting Dimensions (Bottom View) Terminal Arrangement/

Internal Connections

(Bottom View)

Tolerance: 0.1 mm

Eight, 0.8-dia. holes

Orientation mark

Note: Each value has a tolerance of 0.3 mm.

Low Signal Relay G6K

■ Packaging Information

Tube packing

Standard nomenclature

50 pcs per anti-static tube

900 pcs per reel

2 reels per box

Tape packing

(SMT versions, only)

When ordering, add “TR” before the rated coil voltage (e.g., G6K-2G-TR-DC5).

Note: TR is not part of the relay model number and will not be marked on the relay.

Order in box multiples

(see details below)

Relays in tube packing are arranged so that the orientation mark of each Relay is on the left side.

Be sure to reference Relay orientation when mounting the Relay to the PCB.

Orientation of Relays

Stopper (gray)

Stopper (green)

Tube length: 520 mm (stopper not included)

No. of Relays per Tube: 50

■ Tape and Reel Dimensions (Surface Mount Models)

• Tape type: ETX7200 (EIAJ - Electronic Industrial Association of Japan)

• Reel type: RPM-16D (EIAJ, 330 mm diameter)

• Relays per reel: 900

3. Carrier Tape Dimensions

G6K-2F, G6K-2F-Y, G6KU-2F-Y

1. Direction of Relay Insertion

Orientation mark

Top tape

(cover tape)

Pulling

direction

Carrier tape

Emboss

tape

G6K-2G, G6K-2G-Y, G6KU-2G-Y

2. Reel Dimensions

Low Signal Relay G6K

■ Recommended Soldering Method

Temperature indicates the surface temperature of the PCBs.

IRS Method (for surface mounting terminal models)

(1) IRS Method (Mounting Solder: Lead)

(2) IRS Method (Mounting Solder: Lead-free)

Upper surface of case (peak):

255˚C max.

Soldering

250 max.

Soldering

230

220 to

245

180

180 to

200

Preheating

150

Relay

terminal

section

Preheating

150

120 max.

30 max.

Time (s)

20 to 30

90 to 120

Note: The temperature profile indicates the

temperature of the relay terminal

section.

Time (s)

• The thickness of cream solder to be applied should be within a range between 150 and 200 μm on OMRON’s recommended PCB pattern.

• In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side.

Correct Soldering

Incorrect Soldering

Relay

Insufficient

amount of

solder

Excessive

amount of

solder

Terminal

Solder

PCB

Land

Visually check that the Relay is properly soldered.

Precautions

■ Correct Use

Handling

Do not unpack the relay until mounting it.

Environmental Conditions During Operation,

Storage, and Transportation

It is best to keep the relay in its packaging in a controlled environ-

ment until it is ready for mounting.

Soldering

Solder: JIS Z3282, H63A or equivalent

If the Relay is stored for a long time in an adverse environment with

high temperature, high humidity, organic gases, or sulfide gases, sul-

fide or oxide films will form on the contact surfaces. These films may

result in unstable contact, contact problems, or functional problems.

Therefore, operate, store, or transport the product under specified

environmental conditions.

Soldering temperature: Approx. 250°C (260°C if the DWS method is

used)

Soldering time: Approx. 5 s max. (approx. 2 s for the first time and

approx. 3 s for the second time if the DWS method is used)

Be sure to make a molten solder level adjustment so that the solder

will not overflow on the PCB.

Latching Relay Mounting

Make sure that the vibration or shock that is generated from other

devices, such as relays in operation, on the same panel and imposed

on the Latching Relay does not exceed the rated value, otherwise the

Latching Relay that has been set may be reset or vice versa. The

Latching Relay is reset before shipping. If excessive vibration or

shock is imposed, however, the Latching Relay may be set acciden-

tally. Be sure to apply a reset signal before use.

Claw Securing Force During Automatic

Mounting

During automatic insertion of Relays, make sure to set the securing

force of each claw to the following so that the Relays characteristics

will be maintained.

Maximum Allowable Voltage

The maximum allowable voltage of the coil can be obtained from the

coil temperature increase and the heat-resisting temperature of coil

insulating sheath material. (Exceeding the heat-resisting tempera-

ture may result in burning or short-circuiting.) The maximum allow-

able voltage also involves important restrictions which include the

following:

Direction A: 1.96 N

Direction B: 4.90 N

Direction C: 1.96 N

Low Signal Relay G6K

• Must not cause thermal changes in or deterioration of the insulating

material.

• Must not cause damage to other control devices.

• Must not cause any harmful effect on people.

• Must not cause fire.

Therefore, be sure to use the maximum allowable voltage as speci-

fied in the catalog.

As a rule, the rated voltage must be applied to the coil. A voltage

exceeding the rated value, however, can be applied to the coil pro-

vided that the voltage is less than or equal to the maximum allowable

voltage. It must be noted that continuous voltage application to the

coil will cause a coil temperature increase which may affect charac-

teristics such as electrical life and coil insulation.

Coating

The Relay mounting on the PCB may be coated or washed but do not

apply silicone coating or detergent containing silicone, otherwise the

silicone coating or detergent may remain on the surface of the Relay.

PCB Mounting

If two or more Relays are closely mounted with the long sides of the

Relays facing each other and soldering is performed with infrared

radiation, the solder may not be properly exposed to the infrared

rays. Be sure to keep the proper distance between adjacent Relays

as shown below to insure formation of good solder joints.

G6K-2G

2 mm min.

G6K-2F

2.7 mm min.

Two or more Relays may be mounted as closely as desired with the

short sides of the Relays facing each other.

Low Signal Relay G6K

All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which

can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

09/11

Specifications subject to change without notice

Printed in USA

Cat. No. X301-E-1b

Low Signal Relay G6K

G6K-2P-TR-DC5 [OMRON]

相关型号：

G6K-2P-TR-DC6

G6K-2P-TR-DC9

G6K-2P-TR24VDC

G6K-2P-TR5VDC

G6K-2P-Y

G6K-2P-Y-4.5VDC

G6K-2P-Y-5VDC

G6K-2P-Y-DC24

G6K-2P-Y-DC3

G6K-2P-Y-DC4.5

G6K-2P-Y-DC5

G6K-2P-Y-DC9