G6KU-2F-RF-S5VDC-TR09 [OMRON]
RF Relay, DPDT, Latched, 0.021A (Coil), 5VDC (Coil), 100mW (Coil), 1A (Contact), 30VDC (Contact), 1000MHz, DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT;
| 型号： | G6KU-2F-RF-S5VDC-TR09 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | RF Relay, DPDT, Latched, 0.021A (Coil), 5VDC (Coil), 100mW (Coil), 1A (Contact), 30VDC (Contact), 1000MHz, DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT 光电二极管 |
| 文件： | 总8页 (文件大小：238K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
G6K(U)-2F-RF(-S)
Surface-mounting High-frequency Relay
Surface-mounting, 1-GHz-Band,
Miniature, DPDT, High-frequency Relay
■ Superior high-frequency characteristics (at
1 GHz), such as an isolation of 20 dB min.
between contacts of the same polarity or 30 dB
min. between contacts of different polarity with an
insertion loss of 0.2 dB max.
■ Miniaturized to 10.3 × 6.9 × 5.4 mm (L × W × H).
■ Rated power consumption of 100 mW with high
sensitivity.
■ Single-side stable and single-winding latching
models available.
■ Models with a smaller footprint (G6K(U)-2F-RF-S)
are available to help save space.
RoHS Compliant
Ordering Information
■ Model Number Legend:
G6K@-@@-@-@
1
2
3
4
5
1. Relay Function
None: Single-side stable
U: Single-winding latching
2. Contact Form
2: DPDT
3. Terminal Shape
5. Ground Terminal Shape
F:
Surface-mounting terminals
None: Standard
S: Small footprint
4. Special Function
RF:
High-frequency compatible
■ List of Models
Standard Models with Surface-mounting Terminals
Classification
Structure
Contact form
Rated coil voltage
Model
Minimum quantity
packaged (See note.)
Single-side stable
Plastic sealed DPDT
3, 4.5, 5, 12, and 24 VDC G6K-2F-RF(-S)
3, 4.5, 5, 12, and 24 VDC G6KU-2F-RF(-S)
300 Units/tray
Single-winding latching
300 Units/reel
Note: When ordering Relays in tape packing, add “-TR03” or “-TR09” to the end of the model number. If “-TR” is not added, the Relays
will be provided in tray packing.
Relays per reel: 300 for “-TR03”
900 for “-TR09”
This specification, however, is not part of the relay model number, so it is not marked on the relay case.
Application Examples
• Measurement equipment
• Communications equipment
• Broadcasting and audio-visual equipment
• Medical equipment
1
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Specifications
■ Contact Ratings
■ Coil Ratings
Single-side Stable Models
Load
Resistive load
G6K-2F-RF(-S)
Rated load
125 VAC, 0.3 A
30 VDC, 1 A
1 GHz, 1 W (See note.)
Rated voltage (VDC)
Rated current (mA)
Coil resistance (Ω)
3
4.5
5
12
24
33.0
91
23.2
194
21.1
237
9.1
4.6
Rated carry current
1 A
1,315
5,220
Max. switching voltage
Max. switching current
125 VAC or 60 VDC
1 A
Must operate voltage 80% max. of rated voltage
(V)
Must release voltage 10% min. of rated voltage
(V)
Note: This value is for a V.SWR of 1.2 max. at the load.
Maximum voltage (V) 150% of rated voltage
■ High-frequency Characteristics (See
Power consumption Approx. 100 mW
(mW)
note 3.)
Frequency
1 GHz
20 dB min.
Single-winding Latching Models
G6KU-2F-RF(-S)
Item
Isolation
Between contacts
of the same polarity
Rated voltage (VDC)
Rated current (mA)
Coil resistance (Ω)
3
4.5
5
12
24
33.0
91
23.2
194
21.1
237
9.1
4.6
Between contacts
of different polarity
30 dB min.
1,315
5,220
Must operate voltage 75% max. of rated voltage
(V)
Insertion loss
0.2 dB max.
V.SWR
1.2 max.
Must release voltage 75% max. of rated voltage
(V)
Maximum carry power
Maximum switching power
3 W (See note 4.)
1 W (See note 4.)
Maximum voltage (V) 150% of rated voltage
Power consumption Approx. 100 mW
(mW)
Note: 1. The impedance of the measurement system is 50 Ω.
2. The above values are initial values.
Note: 1. The rated current and coil resistance are measured at
a coil temperature of 23°C with a tolerance of 10%.
3. Contact your OMRON representative if the Relay will
be used in applications that require high repeatability
with high-frequency characteristics in microload re-
gions.
2. The operating characteristics are measured at a coil
temperature of 23°C.
3. The maximum voltage is the highest voltage that can
4. These values are for a V.SWR of 1.2 max. at the load.
be imposed on the Relay coil instantaneously.
■ Characteristics
Item
Single-side stable models
G6K-2F-RF(-S)
Single-winding latching models
G6KU-2F-RF(-S)
Contact resistance (See note 2.)
Operating (set) time (See note 3.)
Release (reset) time (See note 3.)
Minimum set/reset pulse time
Insulation resistance (See note 4.)
100 mΩ max.
3 ms max. (approx. 1.4 ms)
3 ms max. (approx. 1.3 ms)
---
3 ms max. (approx. 1.2 ms)
3 ms max. (approx. 1.2 ms)
10 ms
1,000 MΩ min. (at 500 VDC)
750 VAC, 50/60 Hz for 1 min
Dielectric
strength
Between coil and contacts
Between contacts of different po- 750 VAC, 50/60 Hz for 1 min
larity
Between contacts of the same po- 750 VAC, 50/60 Hz for 1 min
larity
Between ground and coil/contacts 500 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 2.5-mm single amplitude (5-mm double amplitude) and
2
55 to 500 to 55 Hz, 300 m/s
Malfunction: 10 to 55 to 10 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and
2
55 to 500 to 55 Hz, 200 m/s
2
Shock resistance
Endurance
Destruction: 1,000 m/s
Malfunction: 750 m/s
2
Mechanical: 50,000,000 operations min. (at a switching frequency of 36,000 operations/hour)
Electrical:
100,000 operations min. (at a switching frequency of 1,800 operations/hour)
Ambient temperature
Ambient humidity
Weight
Operating: −40°C to 70°C (with no icing or condensation)
Operating: 5% to 85%
Approx. 0.95 g
Note:
1. The above values are initial values.
2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
3. Values in parentheses are actual values.
4. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric
strength.
2
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Engineering Data
G6K-2F-RF
Agile HP 8753D
Vector Network
Analyzer
50 Ω
terminaltion
High-frequency Characteristics
(Isolation)
High-frequency Characteristics
(Insertion Loss)
High-frequency Characteristics
(Return Loss, V.SWR)
G6K-2F-RF
G6K-2F-RF
G6K-2F-RF
Average value (initial)
Average value (initial)
Average value (initial)
0
0
0
1.8 V
Test subject: G6K-2F-RF
Number of Units: 5
Test subject: G6K-2F-RF
Number of Units: 10
Test subject: G6K-2F-RF
Number of Units: 10
·
S
10
1.7
W
10
R
0.1
20
30
40
50
60
70
1.6
20
30
40
50
60
1.5
1.4
1.3
1.2
0.2
0.3
Return loss
V.SWR
0.4
0.5
1.1
1.0
70
80
80
90
0
0.5
1
1.5
2
2.5
3
0
0.5
1
1.5
2
2.5
3
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Frequency (GHz)
Frequency (GHz)
G6K-2F-RF-S
G6K-2F-RF-S
G6K-2F-RF-S
Average value (initial)
Average value (initial)
Average value (initial)
0
0
1.8
1.7
0
V
·
S
W
R
Test subject: G6K-2F-RF-S
Number of Units: 10
Test subject: G6K-2F-RF-S
Number of Units: 5
Test subject: G6K-2F-RF-S
Number of Units: 10
10
20
30
40
50
60
70
10
20
30
40
50
60
0.1
0.2
0.3
1.6
1.5
1.4
1.3
1.2
Return loss
V.SWR
0.4
0.5
80
90
70
80
1.1
1.0
0
0.5
1
1.5
2
2.5
3
0
0.5
1
1.5
2
2.5
3
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Frequency (GHz)
Frequency (GHz)
Note: 1. Refer to the G6K specifications for basic specifications not shown above.
2. Ambient temperature condition: 23°C
3. The high-frequency characteristics depend on the mounting board. Be sure to check operation including durability in actual
equipment before use.
3
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G6K-2F-RF
G6KU-2F-RF
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6K-2F-RF
7.6
Orientation mark
5.4
3.2
8
7
6
5
4
12.8
10.3
−
0.5
0.6
6.9
7.8
1.8
+
7
2.5
1
2
3
5.4
0.3
2.5
0.8
0.5
1.35
G6KU-2F-RF
(1.35)
Orientation mark
3.2
5.4
1.95
8
7
6
5
11.5
7.6
− +
S R
+ −
Note: 1. Each value has a tolerance of 0.3 mm.
2. The coplanarity of the terminals is 0.15 mm max.
1
2
3
4
G6K-2F-RF-S
G6KU-2F-RF-S
Terminal Arrangement/Internal
Connections (Top View)
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
0.85
1.55
1.5
0.85
G6K-2F-RF-S
8.8
7.6
5.4
Orientation mark
G6K-2F-RF-S
VDC
7.8 8.6
3.2
8
1
7
2
6
3
5
4
1.2
1.6
JAPAN
−
+
10.7
10.3
2.1
1.8
7.5
7
0.6
6.9
G6KU-2F-RF-S
5.4
(1.35)
1
0.8
0.3
Orientation mark
1.8
0.5
1.35
8
7
6
5
3.2
5.4
− +
S R
7.6
+ −
1
2
3
4
Note: 1. Each value has a tolerance of 0.3 mm.
2. The coplanarity of the terminals is 0.15 mm max.
4
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Tape Packing Specifications (Surface-mounting Terminal Relays)
• Add “-TR03” or “-TR09” to the end of the model number to order
Relays in tape packing. If “-TR” is not added, the Relays will be
provided in tray packing.
3. Carrier Tape Dimensions
G6K(U)-2F-RF
5.9 0.1
12 1.0
4
Relays per reel: 300 for “-TR03”
1.5+0.1 dia.
0.1
900 for “-TR09”
0
1.75 0.1
11.5 0.1
2
0.1
0.4 0.1
B
A
1. Direction of Relay Insertion
24 0.2
13.4 0.1
10.9 0.1
Top tape
(cover tape)
0°
3°−1°
B-B Cross Section
B
A
4.25 0.1
0°
3°−1°
Carrier tape
Embossed
tape
Pulling Direction
A-A Cross Section
G6K(U)-2F-RF
G6K(U)-2F-RF-S
Orientation mark
Orientation mark
8.5 0.1
G6K(U)-2F-RF-S
Pulling
direction
Pulling
direction
5.9 0.1
12 0.1
4
0.1
1.5+0.1 dia.
1.75 0.1
0
2
0.1
0.4 0.05
B
A
2. Reel Dimensions
11.5 0.1
24 0.3
29.5
1
11.3 0.1
25.5 0.5
13 0.2 dia.
3° max.
21 0.8 dia.
2
0.5
B-B Cross Section
B
A
3° max.
9.2 0.1
A
330 80
A-A Cross Section
R1
Enlarged View of Section A
5
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Recommended Soldering Method
The thickness of cream solder to be applied should be between
200 and 250 µm and the land pattern should be based on
OMRON’s recommended PCB pattern.
Recommended Conditions for IRS Method
(Surface-mounting Terminals)
(1) IRS Method (Mounting Solder: Lead)
To maintain the correct soldering joint shown in the following dia-
gram, we recommend applying solder with the soldering condi-
tions shown on the left.
Correct Soldering
Incorrect Soldering
Relay
Soldering
220 to
245
Terminal
Solder
Excessive
amount of
solder
Insufficient
amount of
solder
PCB
Land
180 to
200
Check the soldering in the actual mounting conditions before use.
Preheating
150
90 to 120
20 to 30
Time (s)
Note: The temperature profile indicates the temperature on the
circuit board surface.
(2) IRS Method (Mounting Solder: Lead-free)
Case top panel
(peak): 255°C max.
Soldering
250 max.
230
180
Preheating
150
Relay terminal
section
120 max.
30 max.
Time (s)
Note: The temperature profile indicates the temperature on the
PCB.
6
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
Safety Precautions
For general precautions, refer to the PCB Relays Catalog (X033).
Familiarize yourself with the precautions and glossary before
using the G6K(U)-2F-RF.
Claw Securing Force During Automatic
Mounting
During automatic insertion of Relays, be sure to set the securing
force of each claw to the following so that the Relay’s characteris-
tics will be maintained.
■ Precautions for Correct Use
Relay Handling
C
Direction A: 1.96 N max.
Direction B: 4.90 N max.
Direction C: 1.96 N max.
Use the Relay as soon as possible after opening the moisture-
proof package. If the Relay is left for a long time after opening the
moisture-proof package, the appearance may suffer and seal fail-
ure may occur after the solder mounting process. To store the
Relay after opening the moisture-proof package, place it into the
original package and seal the package with adhesive tape.
B
Secure the claws to the shaded area.
Do not attach them to the center of the
Relay or just one part of the Relay.
When washing the product after soldering the Relay to a PCB,
use a water-based solvent or alcohol-based solvent and keep the
solvent temperature to less than 40°C. Do not put the Relay in a
cold cleaning bath immediately after soldering.
Coating
Do not use silicone coating to coat the Relay when it is mounted
to the PCB. Do not wash the PCB after the Relay is mounted
using detergent containing silicone. Otherwise, the detergent may
remain on the surface of the Relay.
Environmental Conditions for Usage, Storage,
and Transport
Avoid direct sunlight when using, storing, or transporting the
Relay and maintain normal temperature, humidity, and pressure
conditions.
Repeatability
Contact your OMRON representative if the Relay will be used in
applications that require high repeatability with high-frequency
characteristics in microload regions.
Long-term, Continuous ON Contacts
Using the Relay in a circuit where the Relay will be ON continu-
ously for long periods (rather than switching) can lead to unstable
contacts because the heat generated by the coil itself will affect
the insulation and can cause a film to develop on the contact sur-
faces. We recommend using a latching relay (magnetic-holding
relay) in this kind of circuit. If a single-side stable model must be
used in this kind of circuit, we recommend adding fail-safe circuits
in case the contact fails or the coil burns out.
7
G6K(U)-2F-RF(-S)
G6K(U)-2F-RF(-S)
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K908-E1-02
In the interest of product improvement, specifications are subject to change without notice.
OMRON RELAY & DEVICES Corporation
Low Signal Relay Division
Marketing & Product Engineering Department
1110, Sugi, Yamaga-city, Kumamoto-Pref., 861-0596 Japan
Tel: (81)968-44-4194/Fax: (81)968-44-4107
0707
相关型号：
©2020 ICPDF网 联系我们和版权申明