首页 |元器件品牌

G6S-2F-Y-DC6 [OMRON]

POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.033A (COIL), 6VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT;
G6S-2F-Y-DC6
型号： G6S-2F-Y-DC6
厂家： OMRON ELECTRONICS LLC    OMRON ELECTRONICS LLC
描述：

POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.033A (COIL), 6VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT

光电二极管 继电器
文件： 总12页 (文件大小：230K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
GLow6SigSnal Relay  
• Third generation surface mount design.  
• Design is based on worldwide telecommunications, data  
communications, computer peripheral and office automation  
relay requirements.  
• High dielectric withstand voltage of 2,000 VAC between coil  
and contacts (standard type).  
• Meets FCC Part 68 and Telcordia 2.5 kV surge withstand re-  
quirements.  
• European version certified for EN60950/EN41003 Supple-  
mentary Insulation at 250 V at Pollution Degree 2.  
• Available in PCB through-hole and SMT terminal  
configuration.  
• Tape and reel or tube packaging.  
Ordering Information  
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6S-2F-DC12)  
I Standard Version  
Note: Complies with UL1950 Basic Insulation at 125 V (pollution degree 1 for internal spacings, pollution degree 2 for external spacings).  
Terminal  
Contact form  
Model  
Single coil latching  
Non-latching  
G6S-2F  
Dual coil latching  
High-sensitivity  
dual coil latching  
Gull-wing  
DPDT  
G6SU-2F  
G6SU-2G  
G6SU-2  
G6SK-2F  
G6SK-2G  
G6SK-2  
G6SK-2F-H  
G6SK-2G-H  
G6SK-2-H  
Inside “L”  
DPDT  
DPDT  
G6S-2G  
G6S-2  
PCB through-hole  
I European Version  
Certified for EN60950/EN41003/UL1950 Supplementary Insulation at 250 V (pollution degree 2).  
Terminal  
Contact form  
Model  
Non-latching  
Gull-wing  
DPDT  
G6S-2F-Y  
G6S-2G-Y  
G6S-2-Y  
Inside “L”  
DPDT  
DPDT  
PCB through-hole  
168  
Low Signal Relay G6S  
Specification  
I Contact Data  
Load  
Resistive load (cos ø = 1)  
Rated load  
0.5 A at 125 VAC  
2 A at 30 VDC  
Contact material  
Ag (Au clad)  
2 A  
Max. carry current  
Max. operating voltage  
Max. operating current  
Max. switching capacity  
Min. permissible load  
250 VAC, 220 VDC  
2 A  
62.5 VA, 60 W  
10 mVDC, 10 µA  
I Coil Data  
G6S - Standard Non-latching (G6S-2F, G6S-2G, G6S-2)  
Rated  
voltage  
(VDC)  
Rated  
current  
(mA)  
Coil  
resistance  
(Ω)  
Pick-up  
voltage  
Dropout  
voltage  
Maximum  
voltage  
Power consumption (mW)  
% of rated voltage  
3
46.7  
64.3  
75% max.  
10% max.  
200% max.  
140  
4.5  
5
31.0  
28.1  
23.3  
15.5  
11.7  
8.3  
145  
178  
6
257  
9
579  
12  
24  
1,028  
2,880  
75% max.  
10% min.  
170% max.  
200  
100  
G6SU - Standard Single Coil Latching (G6SU-2F, G6SU-2G, G6SU-2)  
Rated  
voltage  
(VDC)  
Rated  
current  
(mA)  
Coil  
resistance  
(Ω)  
Set pick-up Reset pick-up  
voltage  
Maximum  
voltage  
Power consumption (mW)  
voltage  
% of rated voltage  
3
33.3  
90  
75% max.  
75% max.  
180% max.  
4.5  
5
22.2  
20.0  
16.7  
11.1  
8.3  
203  
250  
6
360  
9
810  
12  
24  
1,440  
3,840  
6.3  
75% max.  
75% max.  
180% max.  
150  
G6SK - Standard Dual Coil Latching (G6SK-2F, G6SK-2G, G6SK-2)  
Set coil  
Reset coil  
Set pick-up Resetpick-up  
Maximum  
voltage  
Power  
consumption  
(mW)  
voltage  
voltage  
Rated  
voltage  
(VDC)  
Rated  
current  
(mA)  
Coil  
resistance  
(Ω)  
Rated  
Coil  
resistance  
(Ω)  
% of rated voltage  
current  
(mA)  
3
66.6  
45  
66.6  
45  
75% max.  
75% max.  
170% max.  
200  
4.5  
5
44.4  
40.0  
33.3  
22.2  
16.7  
12.5  
101  
125  
180  
405  
720  
1,920  
44.4  
40.0  
33.3  
22.2  
16.7  
12.5  
101  
125  
180  
405  
720  
1,920  
6
9
12  
24  
75% max.  
75% max.  
140% max.  
300  
Low Signal Relay G6S  
169  
G6SK - Standard High-sensitivity Dual Coil Latching (G6SK-2F-H, G6SK-2G-H, G6SK-2-H)  
Set coil  
Reset coil  
Set pick-up Resetpick-up  
Maximum  
voltage  
Power  
consumption  
(mW)  
voltage  
voltage  
Rated  
voltage  
(VDC)  
Rated  
current  
(mA)  
Coil  
resistance  
(Ω)  
Rated  
Coil  
resistance  
(Ω)  
% of rated voltage  
current  
(mA)  
3
46.7  
64.3  
46.7  
64.3  
75% max.  
75% max.  
130% max.  
140  
4.5  
5
31.0  
28.1  
23.3  
15.6  
11.7  
8.33  
145  
31.0  
28.1  
23.3  
15.6  
11.7  
8.33  
145  
178  
178  
6
257  
257  
9
579  
579  
12  
24  
1,028  
2,880  
1,028  
2,880  
75% max.  
75% max.  
130% max.  
200  
G6S - European Version, Non-latching (G6S-2F-Y, G6S-2G-Y, G6S-2-Y)  
Rated  
voltage  
(VDC)  
Rated  
current  
(mA)  
Coil  
resistance  
(Ω)  
Pick-up  
voltage  
Dropout  
voltage  
Maximum  
voltage  
Power consumption (mW)  
% of rated voltage  
3
66.7  
45  
75% max.  
10% max.  
130% max.  
200  
4.5  
5
44.6  
40.0  
33.3  
22.2  
16.7  
9.58  
101  
125  
180  
405  
720  
2,504  
6
9
12  
24  
75% max.  
10% max.  
110% max.  
230  
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of 10%.  
2. The operating characteristics are measured at a coil temperature of 23°C (73°F) unless otherwise specified.  
3. Pick-up voltage is measured with no carry current across the contacts.  
4. Pick-up voltage will vary with temperature.  
I Characteristics  
Contact resistance (initial)  
Operate (set) time  
Release (reset) time  
Bounce time  
75 mΩ max.  
4 ms max. (mean value approx. 2.5 ms G6S; 2.0 ms G6SU, G6SK)  
4 ms max. (mean value approx. 1.5 ms G6S; 2.0 ms G6SU, G6SK)  
Approx. 0.5 ms  
Insulation resistance  
Dielectric strength  
1,000 MΩ min. (at 500 VDC)  
2,000 VAC, 50/60 Hz for 1 minute (G6S, G6SU) between coil and contacts  
1,000 VAC, 50/60 Hz for 1 minute (G6SK) between coil and contacts  
1,500 VAC, 50/60 Hz for 1 minute between contacts of different poles  
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole  
Surge withstand voltage  
2,500 V, 2 x 10 µS (conforms to Telcordia specifications) for G6S and G6SU  
1,500 V, 10 x 160 µS (conforms to FCC part 68) for G6SK between coil and contacts  
2,500 V, 2 x 10 µS (conforms to Telcordia specs.) between contacts of different poles  
1,500 V, 10 x 160 µS (conforms to FCC part 68) between contacts of same pole  
Vibration  
Shock  
Mechanical durability 10 to 55 Hz; 5 mm (0.20 in) double amplitude  
Malfunction  
durability  
10 to 55 Hz; 3.3 mm (0.13 in) double amplitude  
1,000 m/s2; approx. 100 G  
Mechanical durability  
2
Malfunction  
durability  
750 m/s ; approx. 75 G  
Ambient temperature  
Humidity  
-40 to +85°C (-40°F to +185°F)  
10% to 85% RH  
Service life  
Mechanical  
Electrical  
100,000,000 operations min. (at 36,000 operations/hour)  
See "Characteristic Data"  
Weight  
Approx. 2g (0.07 oz)  
Note: Data shown are of initial value.  
170  
Low Signal Relay G6S  
I Characteristic Data  
Maximum Switching Capacity  
Ambient Temperature vs.  
Maximum Coil Voltage (G6S)  
Ambient Temperature vs.  
Maximum Coil Voltage (G6SU, G6SK)  
10  
7
5
250  
250  
3-12 VDC  
G6SU  
3
200  
200  
180  
170  
AC  
resistive  
load  
A
170  
150  
1
0.7  
0.5  
150  
140  
24 VDC  
100  
100  
DC  
resistive  
load  
0.3  
B
G6SK (24 VDC)  
G6SK (3-12 VDC)  
50  
0
50  
0
0.1  
10  
30  
50 70 100  
300 500 700 1000  
-40  
-20  
0
20  
40  
60  
80  
100  
-40  
-20  
0
20  
40  
60  
80  
100  
Rated operating voltage (V)  
Ambient temperature (˚C)  
Ambient temperature (˚C)  
A
B
DC (30V, 2A)  
AC (31.25V, 2A)  
DC (220V, 0.27A)  
AC (250V, 0.25A)  
Service Life  
1000  
500  
1000  
500  
1000  
500  
300  
200  
300  
200  
300  
200  
100  
50  
100  
50  
100  
50  
30  
20  
30  
20  
30  
20  
10  
10  
10  
0
0
0.2  
0.4  
0.6  
0.8  
1.0  
0
0.1  
0.2  
0.3  
0.4  
0.5  
0.2  
0.4  
0.6  
0.8  
1.0  
Service life (x106 operations)  
Resistive load: 100 mA, 50 VDC  
Service life (x106 operations)  
Service life (x106 operations)  
Resistive load: 10 mA, 10 VDC  
Ambient temperature: +85˚  
Resistive load: 100 mA, 28 VDC  
Ambient temperature: +85˚  
Ambient temperature: +85˚  
Electrical Service Life  
Dielectric Strength (Standard Version, Non-latching)  
Detecting current: 1mA  
50  
50  
500  
300  
200  
40  
40  
100  
30  
20  
30  
20  
30 VDC  
70  
50  
30  
125 VAC  
10  
0
10  
0
10  
0
0.4  
0.8  
1.2  
1.6  
2.0  
1000  
1500  
2000  
2500  
3000  
3500  
1000  
1500  
2000  
2500  
3000  
3500  
Breakdown voltage (V)  
Rated operating current (A)  
Breakdown voltage (V)  
Between coil and contacts  
Between contacts of different poles  
Between contacts of same pole.  
Low Signal Relay G6S  
171  
Impulse Withstand Voltage (Standard Version, Non-latching)  
(2 x 10 µs)  
(10 x 160 µs)  
(10 x 160 µs)  
15  
9
9
10  
6
3
6
5
0
3
0
0
1500  
2000  
2500  
3000  
3500  
4000  
3500  
4000  
4500  
5000  
5500  
6000  
3500  
4000  
4500  
5000  
5500  
6000  
Breakdown voltage (V)  
Breakdown voltage (V)  
Breakdown voltage (V)  
Between contacts of same pole  
Between coil and contacts  
Between contacts of different poles  
Between coil and contacts  
Impulse Withstand Voltage (European version)  
(2 x 10 µs)  
(10 x 160 µs)  
15  
(10 x 160 µs)  
9
9
10  
6
6
5
0
3
0
3
0
1500  
2000  
2500  
3000  
3500  
4000  
4000  
4500  
5000  
5500  
6000  
6500  
4000  
4500  
5000  
5500  
6000  
6500  
Breakdown voltage (V)  
Breakdown voltage (V)  
Breakdown voltage (V)  
Between contacts of same pole  
Between coil and contacts  
Between coil and contacts  
Between contacts of different poles  
Between contacts of different poles  
Dielectric Strength (European Version, Non-latching)  
Detect Current: 1mA  
50  
50  
40  
40  
30  
20  
30  
20  
10  
0
10  
0
1500  
2000  
2500  
3000  
3500  
4000  
1500  
2000  
2500  
3000  
3500  
4000  
Breakdown voltage (V)  
Breakdown voltage (V)  
Between coil and contacts  
Between contacts of different poles  
Between contacts of same pole  
172  
Low Signal Relay G6S  
Dimensions  
Unit: mm (inch)  
I Standard  
G6S-2F, G6S-SF-Y  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
5.08 2.54 2.54  
(.20) (.10) (.10)  
14.8 0.2  
(.583) max.  
Orientation mark  
N
A
P
FF  
A
2
J
--2  
CC  
SS  
N
DD  
66  
I
9.2 0.2  
V
12 V  
G
.65  
E
2
12  
10  
9
8
D
A
MADE IN JAPAN  
(.362)  
max.  
(.026)  
_
+
0.25  
(.01)  
8.0  
(.315)  
2.2  
(.087)  
1.25 0.2  
(.05)  
.50  
(.019)  
1
3
4
5
2.54  
(.10)  
+0.5  
5.08  
(.20)  
9.2  
1.0  
(.039)  
-0.3  
2.54  
(.10)  
G6S-2G, G6S-2G-Y  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
5.08 2.54 2.54  
(.20) (.10) (.10)  
14.8 0.2  
(.583) max.  
Orientation mark  
N
A
P
GG  
A
2
J
--2  
CC  
SS  
N
DD  
66  
I
V
12 V  
G
E
9.2 0.2 .65  
(.362) (.026)  
max.  
2
12  
10  
9
8
D
A
MADE IN JAPAN  
_
+
0.25  
(.01)  
6.1  
(.24)  
2.2  
(.087)  
1.25 0.2  
(.05)  
.50  
(.019)  
1
3
4
5
2.54  
(.10)  
+0.3  
-0.5  
5.08  
(.20)  
1.0  
(.039)  
4.9  
2.54  
(.10)  
G6S-2, G6S-2-Y  
Terminal Arrangement/  
Internal Connections  
(Bottom view)  
Mounting Holes  
(Bottom view)  
7.3 0.2  
(.287) max.  
2.54  
(.10)  
14.8 0.2  
(.583) max.  
Orientation mark  
8 -∅ 1 dia.  
holes  
N
A
YY  
DD  
P
--  
A
2
J
--2  
SS  
66  
CC  
E
N
9.2 0.2  
(.362)  
max.  
I
1
3
4
5
V
G
2
.65  
(.026)  
D
12 V  
A
MADE IN JAPAN  
+
-
5.08  
(.20)  
2.54  
(.10)  
.50  
(.019)  
0.25  
(.01)  
12  
10  
9
8
1.11  
(.04)  
10.16 0.1  
2.54  
(.10)  
5.08  
(0.20)  
1.0  
(.039)  
5.08  
(.20)  
2.54  
(.10)  
Low Signal Relay G6S  
173  
I Single Coil Latching  
G6SU-2F  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
14.8 0.2  
(.583) max.  
5.08 2.54 2.54  
(.20) (.10) (.10)  
Orientation mark  
N
A
FF  
P
2
--2  
A
J
UU  
CC  
SS  
N
DD  
66  
I
.65  
(.026)  
12  
10  
9
8
V
12 V  
A
G
9.2 0.2  
(.362)  
max.  
E
2
D
MADE IN JAPAN  
_
S R  
+
+
_
0.25  
(.01)  
8.0  
(.315)  
2.2  
(.087)  
1.25 0.2  
(.05)  
.50  
(.019)  
1
3
4
5
2.54  
(.10)  
+0.5  
5.08  
(.20)  
9.2  
-0.3  
2.54  
(.10)  
1.0  
(.39)  
G6SU-2G  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
14.8 0.2  
5.08 2.54 2.54  
(.20) (.10) (.10)  
(.583) max.  
Orientation mark  
N
A
P
GG  
A
2
--2  
CC  
J
SS  
N
I
DD  
66  
9.2 0.2  
(.362)  
max.  
V
12 V  
12  
10  
9
8
G
E
2
D
.65  
(.026)  
A
MADE IN JAPAN  
_
S R  
+
0.25  
(.01)  
+
_
6.1  
(.24)  
2.2  
(.087)  
1.25 0.2  
(.05) max.  
.50  
(.019)  
1
3
4
5
2.54  
(.10)  
5.08  
(.20)  
+0.3  
-0.5  
2.54  
(.10)  
4.9  
1.0  
(.39)  
G6SU-2  
Terminal Arrangement/  
Internal Connections  
(Bottom view)  
Mounting Holes  
(Bottom view)  
7.3 0.2  
(.287) max.  
2.54  
(.10)  
14.8 0.2  
(.583) max.  
8 -∅ 1 dia.  
holes  
Orientation mark  
I
N
A
I
--  
P
2
--2  
UU  
SS  
66  
A
J
CC  
E
N
DD  
I
1
3
4
5
V
12 V  
A
G
9.2 0.2 .65  
(.362) (.026)  
max.  
2
D
MADE IN JAPAN  
_
S R  
+
+
_
5.08  
(.20)  
2.54  
(.10)  
0.25  
(.01)  
.50  
(.019)  
12  
10  
9
8
1.11  
(.04)  
10.16 0.1  
2.54  
(.10)  
1.0  
(.039)  
5.08  
(.20)  
5.08  
(.20)  
2.54  
(.10)  
174  
Low Signal Relay G6S  
I Dual Coil Latching  
G6SK-2F, G6SK-2F-H  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
2.54  
(.10)  
5.08 2.54  
(.20) (.10)  
14.8 0.2  
(.583) max.  
Orientation mark  
N
A
FF  
P
2
--2  
KK  
SS  
66  
A
J
CC  
DD  
N
I
9.2 0.2  
(.362)  
max.  
V
12 V  
12  
10  
9
8
7
6
G
E
2
D
.65  
(.026)  
A
MADE IN JAPAN  
_
S
+
_
R
+
0.25  
(.01)  
8.0  
(.315)  
2.2  
(.087)  
1.25 0.2  
(.05) max.  
.50  
(.019)  
1
3
4
5
2.54  
(.10)  
1.0  
(.39)  
+0.5  
5.08  
(.20)  
2.54 2.54  
(.10) (.10)  
9.2  
-0.3  
G6SK-2G, G6SK-2G-H  
Terminal Arrangement/  
Internal Connections  
(Top view)  
Mounting Pads  
(Top view)  
7.3 0.2  
(.287) max.  
5.08 2.54  
2.54  
14.8 0.2  
(.583) max.  
(.20) (.10) (.10)  
Orientation mark  
N
A
GG  
P
2
--2  
A
J
KK  
CC  
12  
10  
9
8
7
6
SS  
N
9.2 0.2  
DD  
66  
I
V
12 V  
G
E
2
.65  
D
A
(.362)  
max.  
MADE IN JAPAN  
_
S
+
_
(.026)  
0.25  
(.01)  
R
+
6.1  
(.24)  
2.2  
(.087)  
1.25 0.2  
(.05) max.  
.50  
(.019)  
5.08  
(.20)  
1
3
4
5
2.54  
(.10)  
+0.3  
-0.5  
1.0  
(.39)  
2.54 2.54  
(.10)(.10)  
4.9  
G6SK-2, G6SK-2-H  
Terminal Arrangement/  
Internal Connections  
(Bottom view)  
Mounting Holes  
(Bottom view)  
7.3 0.2  
(.287) max.  
14.8 0.2  
2.54  
(.10)  
(.583) max.  
10 -∅ 1 dia.  
holes  
Orientation mark  
I
N
A
I
--  
P
2
--2  
KK  
SS  
66  
A
J
CC  
E
N
9.2 0.2  
(.362)  
max.  
DD  
I
V
12 V  
.65  
(.026)  
G
2
1
3
4
5
D
6
7
A
MADE IN JAPAN  
+
S
-
+
R
-
5.08  
(.20)  
2.54  
(.10)  
.50  
0.25  
(.01)  
(.019)  
5.08  
(.20)  
12  
10  
9
8
1.11  
(.04)  
2.54  
(.10)  
5.08  
(.20)  
12.7 0.1  
1.0  
(.039)  
2.54 2.54  
(.10) (.10)  
Note: 1. Coplanarity is 0.1 mm max.  
2. and indicate mounting marks.  
I Accessories  
Tube packing  
Standard nomenclature  
50 pcs per anti-static tube  
Tape packing  
When ordering, add “TR” before the rated coil voltage (e.g., G6S-2F-TR-DC12)  
Note: TR is not part of the relay model number and will not be marked on the relay.  
Low Signal Relay G6S  
175  
I Dimensions  
Relays per reel: 400  
Reels per packing carton: 2 (800 relays)  
+2  
-1  
(.961)  
0.5  
24.4  
2
(0.79)  
Orientation mark  
29.4 1.0 (1.16)  
Feed  
direction  
Cover tape  
0.8  
21  
(.827)  
80  
(3.15)  
330  
(12.99)  
Carrier tape  
Emboss tape  
R1.0  
13 0.2  
(.512)  
I Approvals  
UL (File No. E41515)/CSA (File No. LR24825)  
Type  
Contact form  
Coil rating  
1.5 to 48 VDC  
Contact ratings  
G6S-2F  
DPDT  
0.5 A, 125 VAC  
G6S-2F-Y  
G6S-2G  
0.3 A, 110 VDC  
2.0 A, 30 VDC  
G6S-2G-Y  
G6S-2  
G6S-2-Y  
G6SU-2F  
G6SU-2G  
G6SU-2  
G6SK-2F  
G6SK-2G  
G6SK-2  
G6SK-2F-H  
G6SK-2G-H  
G6SK-2-H  
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics  
individually defined in this catalog.  
2. In the interest of product improvement, specifications are subject to change.  
3. Complies with UL1950 Basic Insulation at 125 V (pollution degree 1 for internal spacings, pollution degree 2 for external spacings).  
176  
Low Signal Relay G6S  
Low Signal Relay G6S  
177  
Certain Terms and Conditions of Sale  
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the  
part of all catalogs, manuals or other documents, whether electronic or in writ-  
ing, relating to the sale of goods or services (collectively, the "Goods") by  
Omron Electronic Components LLC and its subsidiary companies ("Seller").  
Seller hereby objects to any terms or conditions proposed in Buyer's purchase  
order or other documents which are inconsistent with, or in addition to, these  
Terms. Please contact your Omron representative to confirm any additional  
terms for sales from your Omron company.  
Goods will be free from defects in materials and workmanship for a period of  
twelve months from the date of sale by Seller (or such other period expressed  
in writing by Seller). Seller disclaims all other warranties, express or implied.  
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,  
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-  
ITY OR FITNESS FOR  
A PARTICULAR PURPOSE OF THE GOODS.  
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE  
GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR  
INTENDED USE. Seller further disclaims all warranties and responsibility of  
any type for claims or expenses based on infringement by the Goods or other-  
wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga-  
tion hereunder shall be to replace (in the form originally shipped with Buyer  
responsible for labor charges for removal or replacement thereof) the non-  
complying Good or, at Seller's election, to repay or credit Buyer an amount  
equal to the purchase price of the Good; provided that in no event shall Seller  
be responsible for warranty, repair, indemnity or any other claims or expenses  
regarding the Goods unless Seller's analysis confirms that the Goods were  
properly handled, stored, installed and maintained and not subject to contami-  
nation, abuse, misuse or inappropriate modification. Return of any goods by  
Buyer must be approved in writing by Seller before shipment. Seller shall not  
be liable for the suitability or unsuitability or the results from the use of Goods  
in combination with any electrical or electronic components, circuits, system  
assemblies or any other materials or substances or environments. Any  
advice, recommendations or information given orally or in writing, are not to be  
construed as an amendment or addition to the above warranty.  
2. Prices. All prices stated are current, subject to change without notice by  
Seller. Buyer agrees to pay the price in effect at time of shipment.  
3. Discounts. Cash discounts, if any, will apply only on the net amount of  
invoices sent to Buyer after deducting transportation charges, taxes and  
duties, and will be allowed only if (i) the invoice is paid according to Seller's  
payment terms and (ii) Buyer has no past due amounts owing to Seller.  
4. Orders. Seller will accept no order less than $200 net billing.  
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all  
costs involved in, obtaining any government approvals required for the impor-  
tation or sale of the Goods.  
6. Taxes. All taxes, duties and other governmental charges (other than general  
real property and income taxes), including any interest or penalties thereon,  
imposed directly or indirectly on Seller or required to be collected directly or  
indirectly by Seller for the manufacture, production, sale, delivery, importation,  
consumption or use of the Goods sold hereunder (including customs duties  
and sales, excise, use, turnover and license taxes) shall be charged to and  
remitted by Buyer to Seller.  
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory  
to Seller, Seller reserves the right to stop shipments or require satisfactory 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI-  
security or payment in advance. If Buyer fails to make payment or otherwise  
comply with these Terms or any related agreement, Seller may (without liability  
and in addition to other remedies) cancel any unshipped portion of Goods sold  
hereunder and stop any Goods in transit until Buyer pays all amounts, includ-  
ing amounts payable hereunder, whether or not then due, which are owing to it  
by Buyer. Buyer shall in any event remain liable for all unpaid accounts.  
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation  
unless Buyer indemnifies Seller fully against all costs or expenses arising in  
connection therewith.  
RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-  
TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE  
GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,  
NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of  
Seller exceed the individual price of the Good on which liability is asserted.  
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and  
its employees from and against all liabilities, losses, claims, costs and  
expenses (including attorney's fees and expenses) related to any claim, inves-  
tigation, litigation or proceeding (whether or not Seller is a party) which arises  
or is alleged to arise from Buyer's acts or omissions under these Terms or in  
any way with respect to the Goods. Without limiting the foregoing, Buyer (at  
its own expense) shall indemnify and hold harmless Seller and defend or settle  
any action brought against Seller to the extent that it is based on a claim that  
any Good made to Buyer specifications infringed intellectual property rights of  
another party.  
15. Property; Confidentiality. The intellectual property embodied in the Goods is  
the exclusive property of Seller and its affiliates and Buyer shall not attempt to  
duplicate it in any way without the written permission of Seller. Notwithstand-  
ing any charges to Buyer for engineering or tooling, all engineering and tooling  
shall remain the exclusive property of Seller. All information and materials  
supplied by Seller to Buyer relating to the Goods are confidential and propri-  
etary, and Buyer shall limit distribution thereof to its trusted employees and  
strictly prevent disclosure to any third party.  
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right  
and no course of dealing between Buyer and Seller shall operate as a waiver  
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder  
without Seller's written consent. (c) Amendment. These Terms constitute the  
entire agreement between Buyer and Seller relating to the Goods, and no pro-  
vision may be changed or waived unless in writing signed by the parties.  
(d) Severability. If any provision hereof is rendered ineffective or invalid, such  
provision shall not invalidate any other provision. (e) Setoff. Buyer shall have  
no right to set off any amounts against the amount owing in respect of this  
invoice. (f) As used herein, "including" means "including without limitation".  
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery  
resulting from causes beyond its control, including earthquakes, fires, floods,  
strikes or other labor disputes, shortage of labor or materials, accidents to  
machinery, acts of sabotage, riots, delay in or lack of transportation or the  
requirements of any government authority.  
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:  
a. Shipments shall be by a carrier selected by Seller;  
b. Such carrier shall act as the agent of Buyer and delivery to such carrier  
shall constitute delivery to Buyer;  
c. All sales and shipments of Goods shall be FOB shipping point (unless oth-  
erwise stated in writing by Seller), at which point title to and all risk of loss of  
the Goods shall pass from Seller to Buyer, provided that Seller shall retain a  
security interest in the Goods until the full purchase price is paid by Buyer;  
d. Delivery and shipping dates are estimates only.  
e. Seller will package Goods as it deems proper for protection against normal  
handling and extra charges apply to special conditions.  
11. Claims. Any claim by Buyer against Seller for shortage or damage to the  
Goods occurring before delivery to the carrier must be presented in writing to  
Seller within 30 days of receipt of shipment and include the original transporta-  
tion bill signed by the carrier noting that the carrier received the Goods from  
Seller in the condition claimed.  
Certain Precautions on Specifications and Use  
1. Suitability of Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro  
dards, codes or regulations which apply to the combination of the Good in the  
gramming of a programmable Good, or any consequence thereof.  
Buyer's application or use of the Good. At Buyer's request, Seller will provide 3. Performance Data. Performance data given in this catalog is provided as a  
applicable third party certification documents identifying ratings and limitations  
of use which apply to the Good. This information by itself is not sufficient for a  
complete determination of the suitability of the Good in combination with the  
end product, machine, system, or other application or use. The following are  
guide for the user in determining suitability and does not constitute a warranty  
It may represent the result of Seller's test conditions, and the user must corre  
late it to actual application requirements. Actual performance is subject to the  
Seller's Warranty and Limitations of Liability.  
some examples of applications for which particular attention must be given. 4. Change in Specifications. Product specifications and accessories may be  
This is not intended to be an exhaustive list of all possible uses of this Good,  
nor is it intended to imply that the uses listed may be suitable for this Good:  
(i) Outdoor use, uses involving potential chemical contamination or electrical  
interference, or conditions or uses not described in this document.  
(ii) Energy control systems, combustion systems, railroad systems, aviation  
systems, medical equipment, amusement machines, vehicles, safety  
equipment, and installations subject to separate industry or government  
regulations.  
changed at any time based on improvements and other reasons. It is our prac  
tice to change part numbers when published ratings or features are changed  
or when significant construction changes are made. However, some specifica  
tions of the Good may be changed without any notice. When in doubt, specia  
part numbers may be assigned to fix or establish key specifications for you  
application. Please consult with your Seller's representative at any time to con  
firm actual specifications of purchased Good.  
5. Errors and Omissions. The information in this catalog has been carefully  
checked and is believed to be accurate; however, no responsibility is assumed  
for clerical, typographical or proofreading errors, or omissions.  
(iii) Systems, machines and equipment that could present a risk to life or  
property. Please know and observe all prohibitions of use applicable to  
this Good.  
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS  
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM  
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT  
THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR  
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website  
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.  
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.  
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.  
OMRON ON-LINE  
Global - http://www.omron.com  
USA - http://www.omron.com/oei  
Canada - http://www.omron.ca  
OMRON ELECTRONIC  
COMPONENTS LLC  
55 E. Commerce Drive, Suite B  
Schaumburg, IL 60173  
OMRON CANADA, INC.  
885 Milner Avenue  
Toronto, Ontario M1B 5V8  
416-286-6465  
847-882-2288  
Cat. No. GC RLY8A  
8/04  
Specifications subject to change without notice  
Printed in USA  

相关型号：

G6S-2F-Y-DC9

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.022A (COIL), 9VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR-DC12

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.017A (COIL), 12VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR-DC24

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.01A (COIL), 24VDC (COIL), 230mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR-DC4.5

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.045A (COIL), 4.5VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR-DC5

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.04A (COIL), 5VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR-DC6

 POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.033A (COIL), 6VDC (COIL), 200mW (COIL), 2A (CONTACT), 30VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
OMRON

G6S-2F-Y-TR12VDC

 Power/Signal Relay
OMRON

G6S-2F-Y-TRDC5

 Power/Signal Relay, DPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 2A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON

G6S-2F-Y-TRDC9

 Power/Signal Relay, DPDT, Momentary, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 2A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON

G6S-2F-Y24VDC

 Power/Signal Relay
OMRON

G6S-2F-Y3DC

 Power/Signal Relay,
OMRON

G6S-2F-Y5VDC

 Power/Signal Relay, 2 Form C, DPDT, 8.5VDC (Coil), 2A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
OMRON
©2020 ICPDF网 联系我们和版权申明