G6Z-1PAR-DC3 [OMRON]
RF Relay, SPDT, Momentary, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Through Hole-Straight Mount;
| 型号： | G6Z-1PAR-DC3 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | RF Relay, SPDT, Momentary, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Through Hole-Straight Mount 光电二极管 |
| 文件： | 总19页 (文件大小：965K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High-frequency Relay
G6Z
Miniature 2.6-GHz-Band, SPDT,
High-frequency Relay
• Superior high-frequency characteristics include an isolation
of 30 dB min., 60-65 dB isolation at 900 MHz, insertion loss
of 0.5 dB max., and V.SWR of 1.5 max. at 2.6 GHz.
• Triplate micro stripline technology assures superior
high-frequency characteristics.
• Miniature dimensions of 20 × 8.6 × 8.9 mm (L × W × H).
• Available models include single-coil latching (200 mW),
dual coil latching (360 mW), and models with
reverse contact arrangement.
• Series includes versions with an E-shape terminal struc-
ture, and models with a Y-shape terminal structure, allowing
greater freedom with PCB design.
• Models with 75-Ω impedance and models with
50-Ω impedance are also available.
• Surface mount relays available in tube packaging or tape-
and-reel packaging.
Ordering Information
■ Model Number Legend:
G6Z-ꢀ-ꢀꢀꢀ-ꢀꢀ-DCꢀ
1
2
3
4
5
6
7
1. Relay Function
4. Terminal Structure
None: Non-latching
None: Y-shape terminal
U:
K:
Single coil latching
Dual coil latching
E:
E-shape terminal
5. Characteristic Impedance
2. Contact Form
1: SPDT
3. Terminal Shape
None: 75 Ω
A:
50 Ω
6. Contact Arrangement
F:
P:
Surface mount terminals
None: Standard contact arrangement
PCB through-hole terminals
R:
Reverse contact arrangement
7. Rated Coil Voltage
3, 4.5, 5, 9, 12, 24
High-frequency Relay G6Z
1
■ Standard Models with PCB Through-hole Terminals
Classification Structure
Contact
Terminal
Characteristic
Rated coil voltage
Model
G6Z-1PE
form
arrangement
impedance
Non-latching
Fully
sealed
SPDT
E-shape
Y-shape
E-shape
Y-shape
E-shape
Y-shape
75 Ω
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
G6Z-1PE-A
G6Z-1P
G6Z-1P-A
G6ZU-1PE
G6ZU-1PE-A
G6ZU-1P
Single coil
latching
G6ZU-1P-A
G6ZK-1PE
G6ZK-1PE-A
G6ZK-1P
Dual coil
latching
G6ZK-1P-A
■ Standard Models with Surface-mounting Terminals
Classification Structure
Contact
form
Terminal
arrangement
Characteristic
impedance
Rated coil voltage
Model
Non-latching
Fully
sealed
SPDT
E-shape
Y-shape
E-shape
Y-shape
E-shape
Y-shape
75 Ω
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
G6Z-1FE
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
G6Z-1FE-A
G6Z-1F
G6Z-1F-A
G6ZU-1FE
G6ZU-1FE-A
G6ZU-1F
Single coil
latching
G6ZU-1F-A
G6ZK-1FE
G6ZK-1FE-A
G6ZK-1F
Dual coil
latching
G6ZK-1F-A
Note: When ordering tape and reel packaging (surface-mount models), add “-TR” to the model number, (example: G6Z-1FE“TR”-DC12) “-TR” does
not appear on the relay itself.
Application Examples
These Relays can be used for switching signals in media equipment.
• Wire communications:
Cable TV (STB and broadcasting infrastructure), cable modems, and VRS (video response systems)
• Wireless communications:
Transceivers, ham radios, car telephones, ETC, ITS, high-level TV, satellite broadcasting, text multiplex broadcasting, pay TV, mobile phone sta-
tions, TV broadcasting facilities, and community antenna systems
• Public equipment:
TVs, TV games, satellite radio units, car navigation systems
• Industrial equipment:
Measuring equipment, test equipment, and multiplex transmission devices
2
High-frequency Relay G6Z
Specifications
■ Contact Ratings
Load type
Resistive load
Rated load
10 mA at 30 VAC; 10 mA at 30 VDC; 10 W at 900 MHz (See note)
Rated carry current
Max. switching voltage
Max. switching current
0.5 A
30 VAC, 30 VDC
0.5 A
Note: This value is for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max.
■ High-frequency Characteristics
Frequency
900 MHz
2.6 GHz
Terminal type
Terminal structure
Isolation
Through hole
E-shape Y-shape
Surface mount
E-shape Y-shape
60 dB min.
Through hole
E-shape Y-shape
Surface mount
E-shape Y-shape
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
65 dB min.
60 dB min.
0.2 dB max.
0.1 dB max.
1.2 max.
35 dB min. 45 dB min. 30 dB min. 40 dB min.
Insertion loss (not
including substrate loss)
0.5 dB max.
0.3 dB max.
1.5 max.
V.SWR
1.1 max.
1.3 max.
Return loss
20.8 dB max.
26.4 dB max.
14.0 dB max.
17.7 dB max.
Maximum carry power
10 W (See note 2)
10 W (See note 2)
Maximum switching power
Note: 1. The above values are initial values.
2. These values are for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max.
■ Coil Ratings
The operating characteristics are measured at a coil temperature of 23°C.
Non-latching, Standard and Reverse-contact Models
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, 10%)
Must operate
voltage (VDC)
Must dropout
voltage (VDC)
Maximum
voltage (VDC)
at 70°C max.
Power
consumption
(mW)
3
66.7
44.4
40.0
22.2
16.7
8.3
45
2.25
0.3
4.5
Approx. 200
4.5
5
101.3
125
3.375
3.75
6.75
9
0.45
0.5
0.9
1.2
2.4
6.75
7.5
13.5
18
9
405
12
24
720.4
2880.1
18
36
Single Coil Latching Models G6ZU-1P(E), G6ZU-1F(E)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, 10%)
Must set
voltage (VDC)
Must reset
voltage (VDC)
Maximum
Power
consumption
(mW)
voltage (VDC)
at 70°C max.
3
66.7
44.4
40.0
22.2
16.7
8.3
45
2.25
2.25
150% of rated
voltage
Approx. 200
4.5
5
101.3
125
3.375
3.75
6.75
9
3.375
03.75
6.75
9
9
405
12
24
720.4
2880.1
18
18
High-frequency Relay G6Z
3
Dual Coil Latching Models G6ZK-1P(E), G6ZK-1F(E)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, 10%)
Must set
voltage (VDC)
Must reset
voltage (VDC)
Maximum
voltage (VDC)
at 70°C max.
Power
consumption
(mW)
3
120
80
72
40
30
15
25
2.25
2.25
150% of rated
voltage
Approx. 360
4.5
5
56.2
3.375
3.75
6.75
9
3.375
03.75
6.75
9
69.4
9
224.9
400
12
24
1599.9
18
18
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23° C with a tolerance of 10%.
2. The operating characteristics are measured at a coil temperature of 23° C.
3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.
4
High-frequency Relay G6Z
■ Characteristics
Item
Non-latching
models
Single coil latching
models
Dual coil latching
models
G6Z-1P(E), G6Z-1F(E)
G6ZU-1P(E), G6ZU-1F(E)
G6ZK-1P(E), G6ZK-1F(E)
Contact resistance (See note 2)
Operating (set) time (See note 3)
Release (reset) time (See note 3)
Set/reset time
100 mΩ max.
10 ms max. (approx. 3.5 ms) 10 ms max. (approx. 2.5 ms)
10 ms max. (approx 2.5 ms)
---
12 ms
Insulation resistance (See note 4)
100 MΩ min. (at 500 VDC)
Dielectric strength
Coil and contacts
1,000 VAC, 50/60 Hz for 1 min.
500 VAC, 50/60 Hz for 1 min.
Coil and ground,
contacts and ground
Contacts of same polar- 500 VAC, 50/60 Hz for 1 min.
ity
Vibration resistance
Shock resistance
Mechanical durability
Malfunction durability
Mechanical durability
Malfunction durability
Mechanical
10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
1,000 m/s2
500 m/s2
Service life
1,000,000 operations min. (at 36,000 operations/hour)
Electrical
300,000 operations min. (30 VAC, 10 mA/30 VDC, 10 mA), 100,000 operations min.
(900 MHz, 10 W) at a switching frequency of 1,800 operations/hour
Ambient temperature
Ambient humidity
Weight
Operating: -40° C to 70° C (-40° F to 158° F) (with no icing or condensation)
Operating: 5% to 85% RH
Approx. 2.8 g
Note: 1. The above values are initial values.
2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
3. Values in parentheses are actual values.
4. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the
dielectric strength.
Engineering Data
Ambient Temperature vs.
Maximum Voltage
Ambient Temperature vs. Must
Operate or Must Release Voltage
Shock Malfunction
Y
100
250
200
150
100
50
1,000
Max. estimated value
Energized
Sample: G6Z-1P 5 VDC
90 Number of relays: 5
800
600
400
200
max.
Not
energized
80
70
60
50
40
30
20
10
0
X
1,000
Z
1,000
G6Z
G6ZU
avg.
min.
200
400
600
800
G6ZK
max.
1,000
Z'
1,000
X'
avg.
min.
Shock direction
X
X'
Unit:
m/s2
Y
1,000
Z
Sample: G6Z-1P-A 50 Ω
Must operate voltage
Must release voltage
Y'
5 VDC
Z'
Number of relays: 5
0
Y'
−60 −40 −20
0
20
40
60
80 100
−40
−20
0
20
40
60
80 100
Ambient temperature (°C)
Ambient temperature (°C)
Conditions: Shock is applied in X, Y, and
Z
directions three times each with and
without energizing the Relays to check
for contact malfunctions.
High-frequency Relay G6Z
5
Electrical Endurance (with Must
Operate and Must Release Voltage)
Electrical Endurance (with Must
Operate and Must Release Voltage)
100
100
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
Number of Relays: 5
Number of Relays: 5
Test conditions: 10 mA resistive load at 30 VAC
Switching frequency: 1,800 operations/h
Test conditions: 10 mA resistive load at 30 VDC
Switching frequency: 1,800 operations/h
80
80
Must operate
Must operate
60
max.
min.
max.
min.
60
40
40
Must release
Must release
max.
min.
max.
min.
20
0
20
0
0.0001 0.001
0.01
0.1
1
10
100
0.0001 0.001
0.01
0.1
1
10
100
Operating frequency (×103 operations)
Operating frequency (×103 operations)
Electrical Endurance
(Contact Resistance)
1,000
Electrical Endurance
(Contact Resistance)
1,000
NO
NO
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
contact
NC
700
700
contact
NC
Number of Relays: 5
Number of Relays: 5
Test conditions: 10 mA resistive load
at 30 VAC
Test conditions: 10 mA resistive load
at 30 VDC
500
500
contact
contact
Switching frequency: 1,800 operations/h
Switching frequency: 1,800 operations/h
300
300
max.
100
100
max.
Contact resistance
70
50
70
50
Contact resistance
max.
min.
min.
max.
min.
min.
30
30
10
10
0.001 0.01
0.1
1
10
100 1,000
0.001 0.01
0.1
1
10
100 1,000
Operating frequency (×103 operations)
Operating frequency (×103 operations)
External Magnetic Interference
(Average value)
(Average value)
(Average value)
+30
+30
+20
+30
S
N
S
N
S
N
+20
+10
0
+20
+10
0
+10
0
−10
−10
−10
−20
−30
−20
−30
−20
−30
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
External magnetic field (A/m)
External magnetic field (A/m)
External magnetic field (A/m)
6
High-frequency Relay G6Z
High-frequency Characteristics at 75 Ω High-frequency Characteristics at 75 Ω High-frequency Characteristics at 75 Ω
(Isolation)
(Insertion Loss)
(Return Loss, V.SWR)
(Average value (initial value))
(Average value (initial value))
(Average value (initial value))
V
.
S
W
R
0
0
0
1.7
1.6
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
with terminating resistance
with terminating resistance
10
20
40
60
0.2
0.4
0.6
0.8
Return loss
20
30
40
50
1.5
1.4
1.3
1.2
V.SWR
80
Sample: G6Z-1PE 75 Ω 5 VDC
with terminating resistance
60
70
1.1
1
N.O.
N.C.
N.O.
N.C.
N.O.
N.C.
* Substrate loss removed
100
1.0
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
Frequency (MHz)
High-frequency Characteristics at 50 Ω High-frequency Characteristics at 50 Ω High-frequency Characteristics at 50 Ω
(Isolation)
(Insertion Loss)
(Return Loss, V.SWR)
(Average value (initial value))
(Average value (initial value))
(Average value (initial value))
V
.
S
W
R
0
0
1.7
1.6
0
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
10
20
40
60
0.2
0.4
0.6
0.8
20
30
40
50
1.5
1.4
1.3
1.2
Return loss
V.SWR
80
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
* Substrate loss removed
60
70
1.1
1
N.O.
N.C.
N.O.
N.C.
N.O.
N.C.
100
1.0
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
Frequency (MHz)
Must Operate and Must Release
Time Distribution (See note.)
Must Operate and Must Release
Bounce Time Distribution (See note.)
25
30
Must operate
Must release time
Sample: G6Z-1P
75 Ω 5 VDC
Number of Relays: 32
Must operate bounce time
Must release bounce time
25
20
15
10
5
Sample: G6Z-1P
75 Ω 5 VDC
Number of Relays: 32
20
15
10
5
0
1.0
2.0
3.0
4.0
5.0
0
0.5
1.0
1.5
2.0
Time (ms)
Time (ms)
Note: The tests were conducted at an ambient temperature of 23° C.
High-frequency Relay G6Z
7
Dimensions
Unit: mm
■ PCB Through-hole Terminal Types
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1PE
G6Z-1PE-R
G6ZU-1PE
Tolerance: 0.1 mm
G6Z-1PE
Six, 1.8-dia.
Orientation mark
1
7
Six, 1.0-dia. holes
Three, 1.6-dia.
−
+
7.62
14
13 1211
10
9
8
7
20
8.6
Three, 0.8-dia. holes
2.54
7.62
15.24
G6Z-1PE-R
Orientation mark
1
8.9
3
−
+
6-0.6
3-0.4
0.2
(Coil
terminal)
0.18
14
13 1211
10
9
8
7
8
2.54
7.62
7.62
15.24
G6ZU-1PE
Orientation mark
1
Note: Each value has a tolerance of 0.3 mm.
S
R
−
+
+
−
14
13 1211
10
9
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1PE-A
G6ZU-1PE-A
Tolerance: 0.1 mm
G6Z-1PE-A
Nine, 1.8-dia.
Orientation mark
1
7
Nine, 1.0-dia. holes
−
+
7.62
14
13 1211
10 9
8
20
8.6
2.54
7.62
15.24
G6ZU-1PE-A
8.9
Orientation mark
1
7
8
3
S
R
−
+
−
+
2.54
9-0.6
0.2
(Coil
terminal)
0.18
7.62
7.62
14
13 1211
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
8
High-frequency Relay G6Z
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1P
G6ZU-1P
Tolerance: 0.1 mm
G6Z-1P
Eight, 1.8-dia.
Orientation mark
1
3
4
5
7
Eight, 1.0-dia. holes
−
+
7.62
Three, 1.6-dia.
14
13 12
10 9
8
Three, 0.8-dia. holes
2.54
20
8.6
7.62
15.24
G6ZU-1P
8.9
3
Orientation mark
1
3
4
5
7
8
S
R
−
+
+
−
8-0.6
3-0.4
0.2
(Coil
terminal)
0.18
2.54
7.62
7.62
14
13 12
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1P-A
G6ZU-1P-A
Tolerance: 0.1 mm
G6Z-1P-A
Eleven, 1.8-dia.
Orientation mark
1
3
4
5
7
8
Eleven, 1.0-dia. holes
−
+
7.62
14
13 12
10 9
20
8.6
2.54
7.62
15.24
G6ZU-1P-A
8.9
Orientation mark
1
3
4
5
7
8
3
S
R
−
+
−
+
2.54
11-0.6
0.2
(Coil
terminal)
0.18
7.62
7.62
14
13 12
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1PE
Seven, 1.8-dia.
Orientation mark
1
6
7
−
+
Seven, 1.0-dia. holes
Three, 1.6-dia.
R
−
+
S
7.62
14
13 1211
10 9
8
Three, 0.8-dia. holes
20
8.6
2.54
7.62
15.24
8.9
3
7-0.6
0.2
(Coil
terminal)
0.18
2.54
7.62
3-0.4
7.62
15.24
Note: Each value has a tolerance of 0.3 mm.
High-frequency Relay G6Z
9
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1PE-A
Ten, 1.8-dia.
Orientation mark
1
6
7
−
+
Ten, 1.0-dia. holes
R
−
+
7.62
S
14
13 1211
10 9
8
20
8.6
2.54
7.62
15.24
8.9
3
2.54
7.62
10-0.6
0.2
(Coil
terminal)
0.18
7.62
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1P
Nine, 1.8-dia.
Orientation mark
1
3
4
5
6
7
−
+
R
Nine, 1.0-dia. holes
Three, 1.6-dia.
−
+
S
7.62
14
13 12
10 9
8
20
8.6
Three, 0.8-dia. holes
2.54
7.62
15.24
8.9
3
9-0.6
0.2
(Coil
terminal)
0.18
2.54
7.62
7.62
3-0.4
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
Orientation mark
G6ZK-1P-A
Tolerance: 0.1 mm
Twelve, 1.8-dia.
1
3
4
5
6
7
−
+
R
Twelve, 1.0-dia. holes.
−
+
7.62
S
14
13 12
10 9
8
20
8.6
2.54
7.62
15.24
8.9
3
2.54
7.62
12-0.6
15.24
0.2
(Coil
terminal)
0.18
7.62
Note: Each value has a tolerance of 0.3 mm.
10
High-frequency Relay G6Z
■ Surface Mount Terminal Types
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1FE
G6ZU-1FE
G6Z-1FE
Orientation mark
15.24
14
13 1211
10
9
8
7.62
2.54
2.3
0.8
0.8
0.8
−
+
1
7
20
8.6
9.6
8.3
G6ZU-1FE
0.2
(Coil
terminal)
9.3
Orientation mark
14
Six, 1.1
13 1211
10
9
8
7
0.18
6-0.6
3-0.4
S
R
−
+
+
−
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
1
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1FE-A
G6ZU-1FE-A
G6Z-1FE-A
Orientation mark
15.24
7.62
14
13 1211
10
9
8
2.3
2.54
−
+
1
7
8.3
20
8.6
9.6
G6ZU-1FE-A
Nine, 1.1
0.2
(Coil
terminal)
9.3
Orientation mark
14
13 1211
10
9
8
7
0.18
2.54
7.62
9-0.6
S
R
−
+
+
−
15.24
Note 1: Each value has a tolerance of 0.3 mm.
1
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1F
G6ZU-1F
G6Z-1F
Orientation mark
15.24
14
13 12
10
9
8
2.54
2.3
0.8
0.8
−
+
1
3
4
5
7
8.3
20
8.6
9.6
G6ZU-1F
13 12
Eight, 1.1
0.8
0.2
(Coil
terminal)
9.3
Orientation mark
14
7.62
10
5
9
8
7
0.18
8-0.6
3-0.4
S
R
−
+
+
−
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
1
3 4
15.24
High-frequency Relay G6Z
11
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1F-A
G6ZU-1F-A
G6Z-1F-A
Orientation mark
15.24
14
13 12
10
9
8
2.3
2.54
−
+
8.3
1
3
4
5
7
20
8.6
9.6
Eleven, 1.1
G6ZU-1F-A
7.62
0.2
(Coil
terminal)
9.3
Orientation mark
14
13 12
10
9
8
7
0.18
2.54
11-0.6
S
R
−
+
+
−
7.62
15.24
Note 1: Each value has a tolerance of 0.3 mm.
1
3
4
5
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1FE
Orientation mark
15.24
14
13 1211
10
9
8
7.62
2.54
−
+
S
2.3
0.8
0.8
0.8
−
+
R
1
6
7
20
8.6
9.6
8.3
0.2
(Coil
terminal)
9.3
0.18
Seven, 1.1
7-0.6
3-0.4
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1FE-A
Orientation mark
15.24
7.62
14
13 1211
10
9
8
2.3
2.54
−
+
S
−
+
R
20
8.6
9.6
1
6
7
8.3
0.2
(Coil
terminal)
9.3
Ten, 1.1
0.18
2.54
7.62
Ten, 0.6
15.24
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
12
High-frequency Relay G6Z
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1F
Orientation mark
15.24
14
13 12
10
9
8
7.62
2.54
−
+
S
2.3
0.8
0.8
−
+
R
1
3
4
5
6
7
20
8.6
9.6
8.3
0.2
(Coil
terminal)
9.3
0.18
Nine, 1.1
0.8
Nine, 0.6
Three, 0.4
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1F-A
Orientation mark
15.24
7.62
14
13 12
10
9
8
2.3
2.54
−
+
S
−
+
R
20
8.6
9.6
1
3
4
5
6
7
8.3
0.2
(Coil
terminal)
9.3
Twelve, 1.1
0.18
2.54
Twelve, 0.6
7.62
15.24
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
High-frequency Relay G6Z
13
Tube Packaging and Tape and Reel Packaging
Carrier Tape Dimensions
■ Tube Packaging
Relays in tube packaging are arranged so that the orientation mark
of each Relay in on the left side.
0.1
10
0.1
16
4
0.1
1.5+00.1 dia.
0.1
1.75
0.1
0.05
2
0.5
Be sure not to make mistakes in Relay orientation when mounting
the Relay to the PCB.
0.1
14.2
0.1
0.1
22.6
28.4
Operation of Relays
0.1
20.6
0.3
Stopper (gray)
Stopper (green)
32
5° max.
0.1
10.2
1.5+0
0.1
A
1.7+0
0.15
0.1
4
0.2
5° max.
Tube length: 530 mm (stopper not included)
No. of Relays per tube: 25
R0.75
Enlarged view of A
■ Tape and Reel Packaging
(Surface mount Terminal
Models)
Note: The radius of the unmarked corner is 0.3 mm.
When ordering Relays in tape packing, add the prefix “-TR” to the
model number, otherwise the Relays in stick packing will be provided.
Relays per Reel: 300
Direction of Relay Insertion
Pulling direction
Orientation mark
Top tape
(cover tape)
Pulling
direction
Carrier tape
Emboss
tape
Reel Dimensions
1
33.5
1
37.5
13 0.2 dia.
0.8
21
dia.
0.5
2
A
330 80
R1
Enlarged view of A
14
High-frequency Relay G6Z
Recommended Soldering Method
■ Temperature Conditions for IRS
Method
When using reflow soldering, ensure that the Relay terminals and the
top of the case stay below the following curve. Check that these con-
ditions are actually satisfied before soldering the terminals.
T4
T3
T2
T1
t
2
t
1
Time
Soldering
Preheating
Measured
part
Preheating
(T1 →T2, t1)
Soldering
(T3, t2)
Maximum
peak
(T4)
Terminals
150 →180° C, 230° C min,
250° C max.
120 s max.
30 s max.
Top of case
---
---
255° C max.
Do not quench the terminals after mounting. Clean the Relay using
alcohol or water no hotter than 40°C max.
The thickness of cream solder to be applied should be between 150
and 200 µm on OMRON’s recommended PCB pattern.
Correct Soldering
Incorrect Soldering
Relay
Insufficient
amount of
solder
Excessive
amount of
solder
Terminal
Solder
Land
PCB
Check the soldering in the actual mounting conditions before use.
High-frequency Relay G6Z
15
Safety Precautions
Substrate for High-frequency Characteristic
Compensation (75-Ω Models, E-shape or Y-shape)
■ Precautions for Correct Use
Please observe the following precautions to prevent failure to oper-
ate, malfunction, or undesirable effect on product performance.
30.7
(Unit: mm)
20
4-dia. through-hole
High-frequency Characteristics
Measurement Method and
Measurement Substrate
0.6-dia. through-hole
1
0.95
High-frequency characteristics for the G6Z are measured in the way
shown below. Consult your OMRON representative for details on 50-
Ω models.
40 30
Measurement Method for 75-ΩModels
G6Z
Network vector analyzer
(Agilent Technologies)
75-Ω terminating
resistance
Substrate Types
Material: FR-4 glass epoxy (glass cloth impregnated with epoxy
resin and copper laminated to its outer surface)
HP8753D
50Ω/75Ω adapter
(Agilent Technologies)
11852B-004
Thickness: 1.6 mm
Thickness of copper plating:18 µm
Note: 1. The compensation substrate is used when measuring the
Relay’s insertion loss. The insertion loss is obtained by
subtracting the measured value for the compensation sub-
strate from the measured value with the Relay mounted to
the high-frequency measurement substrate.
Through-hole Substrate (75-Ω Models, E-shape or
Y-shape)
40
30
4-dia. through-hole
2. For convenience, the diagrams of the high-frequency
measurement substrates given here apply both to models
with an E-shape terminal structure and to models with a Y-
shape terminal structure.
0.4
(Unit: mm)
1.4
3. Be sure to mount a standoff tightly to the through-hole sub-
strate.
3.59
4. Use measuring devices, connectors, and substrates that
are appropriate for 50 Ω and 75 Ω respectively.
40 30
1
5. Ensure that there is no pattern under the Relay. Other-
wise, the impedance may be adversely affected and the
Relay may not be able to attain its full characteristics.
0.95
6.3
Handling
0.6-dia. through-hole
Do not use the Relay if it has been dropped. Dropping the Relay may
adversely affect its functionality.
SMD-type Substrate (75-ΩModels, E-shape or Y-shape)
Protect the Relay from direct sunlight and keep the Relay under nor-
mal temperature, humidity, and pressure.
40
Flow Soldering
30
4-dia. through-hole
1.4
(Unit: mm)
Solder: JIS Z3282, H63A
0.4
Soldering temperature: Approx. 250°C (260°C if the DWS method is
used)
0.6-dia. through-hole
Soldering time: Approx. 5 s max. (approx. 2 s for the first time and
approx. 3 s for the second time if the DWS method is used)
Be sure to make a molten solder level adjustment so that the solder
will not overflow on the PCB.
40 30
3.91
1
0.95
6.3
16
High-frequency Relay G6Z
Claw Securing Force During Automatic Mounting
Latching Relay Mounting
During automatic insertion of Relays, be sure to set the securing force of
each claw to the following so that the Relay’s characteristics will be main-
tained.
Make sure that the vibration or shock that is generated from other devices,
such as Relays, on the same panel or substrate and imposed on the
Latching Relay does not exceed the rated value, otherwise the set/reset
status of the Latching Relay may be changed. The Latching Relay is reset
before shipping. If excessive vibration or shock is imposed, however, the
Latching Relay may be set accidentally. Be sure to apply a reset signal
before use.
B
Direction A: 4.90 N max.
Direction B: 4.90 N max.
Direction C: 4.90 N max.
Coating
Do not use silicone coating to coat the Relay when it is mounted to the
PCB. Do not wash the PCB after the Relay is mounted using detergent
containing silicone. Otherwise, the detergent may remain on the surface of
the Relay.
Secure the claws to the shaded area.
Do not attach them to the center area
or to only part of the Relay.
High-frequency Relay G6Z
17
(c) Energy control systems, combustion systems, railroad systems, aviatio
medical equipment, amusement machines, vehicles, safety equipment,
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or p
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVO
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT TH
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND TH
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORI
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFI
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's prog
a programmable Product.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
IV. WARRANTY AND LIMITATION
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
1. Warranty: Seller's exclusive warranty is that the Products will be free from d
materials and workmanship for a period of twelve months from the date of sa
(or such other period expressed in writing by Seller). SELLER MAKES NO W
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WA
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTIC
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the
originally shipped with Buyer responsible for labor charges for removal or re
thereof) the non-complying Product or, at Seller's election, to repay or credit
amount equal to the purchase price of the Product; provided that there shall
liability for Seller or its affiliates unless Seller's analysis confirms that the Pro
handled, stored, installed and maintained and not subject to contamination,
misuse or inappropriate modification. Return of any Products by Buyer mus
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIAB
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LO
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRA
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EV
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL P
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates an
employees from and against all liabilities, losses, claims, costs and expense
attorney's fees and expenses) related to any claim, investigation, litigation or pr
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's
omissions under these Terms or in any way with respect to the Products.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at time of shipment. Payments for Products
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no
right to set off any amounts against the amount owing in respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real property
and income taxes), including any interest or penalties thereon, imposed directly or
indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall
be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel any
unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products shall
pass from Seller to Buyer, provided that Seller shall retain a security interest in the
Products until the full purchase price is paid by Buyer;
1. Intellectual Property: The intellectual property embodied in the Products is th
property of Seller and its affiliates and Buyer shall not attempt to duplicate it
without the written permission of Seller. Buyer (at its own expense) shall indem
hold harmless Seller and defend or settle any action brought against Seller t
that it is based on a claim that any Product made to Buyer specifications inf
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for enginee
tooling, all engineering and tooling shall remain the exclusive property of Se
information and materials supplied by Seller to Buyer relating to the Product
confidential and proprietary, and Buyer shall limit distribution thereof to its tr
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining
and does not constitute a warranty. It may represent the result of Seller's tes
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be cha
time based on improvements or other reasons. It is Seller’s practice to chan
numbers when published ratings or features are changed, or when significa
engineering changes are made. However, some specifications of the Produ
changed without any notice.
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
5. Errors And Omissions: The information on Seller’s website or in other docum
has been carefully checked and is believed to be accurate; however, no res
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and
regarding (a) export of the Products or information provided by Seller; (b) sa
Products to forbidden or other proscribed persons or organizations; (c)disclo
non-citizens of regulated technology or information.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course o
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's writt
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws
and state courts in Illinois have exclusive jurisdiction for any dispute hereun
4. Amendment: These Terms constitute the entire agreement between Buyer a
relating to the Products, and no provision may be changed or waived unless
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such pr
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
18
High-frequency Relay G6Z
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/07
Specifications subject to change without notice
Printed in USA
Cat. No. J01C-E-01
High-frequency Relay G6Z
19
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明