G7J-2A2B-B-W1-DC48 [OMRON]
Power/Signal Relay, 4PST, Momentary, 0.042A (Coil), 48VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,;型号: | G7J-2A2B-B-W1-DC48 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Power/Signal Relay, 4PST, Momentary, 0.042A (Coil), 48VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount, |
文件: | 总8页 (文件大小:997K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
General Purpose Relay
G7J
• Ideal for 3-phase motor control applications and resistive
and inductive loads.
• No contact chattering for momentary voltage drops up to
50% of rated voltage.
• Withstands more than 4 kV between contacts that are of
different polarity and between the coil and contacts.
• Flame-resistant materials (UL94V-0) used for all insulation.
• Push-to-test button on all models lets user check contact
operation.
• Class B coil insulation available.
Ordering Information
Type
Contact form
Model
Quick-connect terminal
Screw terminal
PCB terminal
G7J-4A-P, G7J-4A-PZ
G7J-3A1B-P, G7J-3A1B-PZ
G7J-2A2B-P
PCB mounting
4PST-NO
—
—
—
—
—
—
3PST-NO/SPST-NC
DPST-NO/DPST-NC
4PST-NO
W-bracket
(see note)
G7J-4A-T, G7J-4A-TZ
G7J-3A1B-T, G7J-3A1B-TZ G7J-3A1B-B, G7J-3A1B-BZ
G7J-2A2B-B
G7J-4A-B
3PST-NO/SPST-NC
DPST-NO/DPST-NC G7J-2A2B-T
Note: The G7J relays require a W-bracket for mounting. Order the bracket separately below. To order a relay and bracket packed together,
add “-W1” to the part number before the coil voltage suffix. For example, G7J-2A2B-B-W1-AC100/120.
Model Number Legend
To Order: Select the part number and add the desired coil voltage rating (e.g., G7J-3A1B-B-AC100/120).
1. Contact Form
4A: 4PST-NO
3A1B: 3PST-NO/SPST-NC
2A2B: DPST-NO/DPST-NC
2. Terminal Shape
P: PCB terminals
B: Screw terminals
T: Quick-connect terminals
(#250 terminal)
3. Contact Structure
Z: Bifurcated contact
None: Single contact
G7J -
-
-
1
2
3
Note: For bifurcated contact type,
output is 1NO (4PST-NO) or
1NC (3PST-NO/SPST-NC).
■ Accessories
Types
Applicable relays
Model
W-brackets
G7J-4A-B, G7J-3A1B-B(Z), G7J-2A2B-B, G7J-4A-T(Z), G7J-3A1B-T, G7J-2A2B-T
R99-04-FOR-G5F
■ Typical Applications
Compressors for air conditioners and heater switching controllers.
Switching controllers for power tools or motors.
Lamp controls, motor drivers, and power supply switching controllers in copy machines,
facsimile machines, and other office equipment.
Power controllers for packers or food processing equipment.
Power controllers for inverters.
General Purpose Relay G7J
299
Specifications
■ Contact Data
Load
Resistive load (p.f. = 1)
NO
NC
Rated load
25 A @ 220 VAC (1 A @ 220 VAC) / 25 A @ 30 VDC 8 A @ 220 VAC (1 A @ 220 VAC)/ 8 A @ 30 VDC
Rated carry current
25 A (1 A)
8 A (1 A)
Max. switching voltage
Max. switching current
Max. switching capacity
Min. permissible load
250 VAC,125 VDC
25 A (1 A)
8 A (1A)
5,500 VA, 750 W DC
1,760 VA, 240 W DC
100 mA @ 24 VDC (10 mA @ 24 VDC) at 60 operations/minute, 23°C ambient temperature (See note 2)
Note: 1. The values in parentheses indicate values for a bifurcated contact.
2. P level: λ60 =0.1 x 10-6/operations
■ Coil Data
Rated voltage
Rated
Coil
Must operate
Must release
% of rated voltage
15% min.
Max. voltage
Power
(VAC)
current (mA)
resistance (Ω)
consumption
AC
24
75
—
75% max.
110% @ 23°C
Approx.1.8
to 2.6 VA
50
36
—
—
—
100/120
200/240
12
18 to 21.60
9 to 10.80
DC
167
83
72
10% min.
Approx. 2.0 W
24
288
48
42
1150
5000
100
20
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20% for AC rated current and
±15% for DC coil resistance. The values given for AC rated current apply at 50 Hz or 60 Hz.
2. Performance characteristic data are measured at a coil temperature of 23°C.
■ Characteristics
Contact resistance (See note 2)
Operating time (See note 3)
Release time (See note 3)
Operating frequency Mechanical
Electrical
50 mΩ max.
50 ms max.
50 ms max.
1,800 operations/hour max.
1,800 operations/hour max.
Insulation resistance (See note 4)
Dielectric strength
1,000 MΩ minimum at 500 VDC
4,000 VAC, 50/60 Hz for 1 minute between coil and contacts
4,000 VAC, 50/60 Hz for 1 minute between contacts of different polarity
2,000 VAC, 50/60 Hz for 1 minute between contacts of the same polarity
10,000 V between coil and contact with 1.2 x 50 μs impulse wave
Impulse withstand voltage
Vibration
Mechanical durability 10 to 55 Hz, 1.50 mm double amplitude
Malfunction durability NO: 10 to 55 Hz, 1.50 mm double amplitude
NC: 10 to 26 Hz, 1.50 mm double amplitude
1000 m/s2 (Approx. 100 G)
Shock
Mechanical durability
Malfunction durability
NO: 100 m/s2 (Approx. 10 G)
NC: 20 m/s2 (Approx. 2 G)
Service life
Mechanical
Electrical
1 million operations minimum at 1,800 operations/hour
100,000 operations minimum at 1,800 operations/hour at rated load (@ 23°C
Ambient temperature Operating
-25° to 60°C with no icing or condensation
5% to 85% RH
Humidity
Weight
Operating
PCB terminal
Screw terminal
Approx. 140 g
Approx. 165 g
Note: 1. Data shown are of initial value.
2. Measured with 1A @ 5 VDC using the voltage drop method.
3. Measured with rated voltage imposed, ignoring any contact bounce, at ambient temperature = 23°C.
4. Measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength.
300
General Purpose Relay G7J
Engineering Data
Malfunctioning Shock
Maximum Switching Power
Endurance
5,000
AC resistive load
(cosφ = 1)
AC inductive load
(cosφ = 0.4)
(NO contact)
AC resistive load
(cosφ = 1)
AC inductive load
(cosφ = 0.4)
G7J-2A2B
Terminals upwards
3,000
(NC contact)
Button
A1 downwards
downwards
1,000
DC resistive
load (NO
contact)
700
500
220 VAC (NO contact)
300
A2
downwards
DC resistive load
(NC contact)
100
Button upwards
Energized
Not energized
220 VAC (NC contact)
70
50
300
Terminals
downwards
Unit: m/s2
Switching voltage (V)
Switching current (A)
Shock direction
Number of samples: 5
Measurement conditions: Increase and decrease the specified shock
gradually imposed in X, Y, and Z directions three times each with
the Relay energized and not energized to check the shock values
that cause the Relay to malfunction.
Criteria: There must not be any contact separation for 1 ms or greater
2
with a shock of 100 m/s imposed when the coil is energized or with
a shock of 20 m/s2 when the coil is not energized.
Ambient Temperature vs. Coil
Temperature Rise
Ambient Temperature vs. Must-operate
and Must-release Voltage
G7J 100 to 120 VAC
G7J-4A 100 to 120 VAC
Must-operate voltage
Number of Relays: 5
Number of Relays: 5
Must-release voltage
Ambient temperature (°C)
Ambient temperature (°C)
G7J 24 VDC
G7J-4A 24 VDC
Number of Relays: 5
Must-operate voltage
Must-release voltage
Number of Relays: 5
Ambient temperature (°C)
Ambient temperature (°C)
Motor Load Performance
Item
G7J-4A-P, G7J-3A1B-P, G7J-4A-B, G7J-3A1B-B, G7J-4A-T, G7J-3A1B-T
Load
3φ, 220 VAC, 2.7 kW (with a inrush current of 78 A and a breaking current of 13 A)
Endurance
Electrical: 100,000 operations min.
General Purpose Relay G7J
301
Dimensions
Note: All units are in millimeters unless otherwise indicated
Screw Terminals with W-bracket
G7J-4A-B, G7J-3A1B-B, G7J-3A1B-BZ, G7J-2A2B-B
Ten, M3.5
Mounting Holes
34.5 max.
Two, 4.5 dia. or M4
7.6
4.3
35 0.1
64 max.
55.2
43.2
51.5 max.
2
Quick-connect Terminals with W-bracket
G7J-4A-T, G7J-4A-TZ, G7J-3A1B-T, G7J-2A2B-T
34.5 max.
Mounting Holes
Two, 4.5 dia. or M4
64 max.
Note: W-bracket is sold
separately.
51.5 max.
PCB Terminals with PCB Mounting
G7J-4A-P, G7J-4A-PZ, G7J-3A1B-P, G7J-3A1B-PZ, G7J-2A2B-P
Mounting Dimensions
33.5
max.
20, 1.8+0.1 dia.
0
51 max.
51.5 max.
302
General Purpose Relay G7J
Terminal Arrangement/Internal Connections
G7J-4A-P
G7J-4A-B
G7J-4A-T
G7J-3A1B-P
G7J-3A1B-B
G7J-3A1B-T
G7J-2A2B-P
G7J-2A2B-B
G7J-2A2B-T
14
24
34
13
23
33
14
24
34
13
14
24
32
13
Note: Terminals 43 and 44 of the
G7J-4A-P(T) and contacts
41 and 42 of the
23
33
23
31
G7J-3A1B-P(B) are
bifurcated contacts.
42
A2
41
A1
42
A2
41
A1
44
A2
43
A1
The coil has no polarity.
Accessories (Order Separately)
R99-04 W-bracket (for G5F)
35
Two, 4.5 dia.
24
Mounting Holes
Two, 4.5 dia. or M4
28
30
9
29
35 0.1
7
44
4.4
■ Approvals
Note: 1. The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change without notice.
UL Recognized (File No. E41643) / CSA Certified (File No. LR 35535) - - Ambient Temp = 40°C
Coil ratings
Contact ratings
Number of test
operations
24 to 265 VAC
6 to 110 VDC
NO contact
25 A 277 VAC, Resistive
25 A 120 VAC, General Use
25 A 277 VAC, General Use
25 A 240 VAC, General Use
1.5 kW 120 VAC, Tungsten
1.5 hp 120 VAC
30,000
100,000
6,000
3 hp 240/265/277 VAC
3-phase 3 hp 240/265/277 VAC
3-phase 5 hp 240/265/277 VAC
20FLA/120LRA 120 VAC
17FLA/102LRA 277 VAC
TV-10 120 VAC
30,000
25,000
30,000
6,000
25 A 30 VDC, Resistive
*1 A 277 VAC, General Use
8 A 277 VAC, Resistive
8 A 120 VAC, General Use
8 A 277 VAC, General Use
8 A 30 VDC, Resistive
NC contact
30,000
*1 A 277 VAC, General Use
6,000
Note: *These ratings are bifurcated contact ratings.
General Purpose Relay G7J
303
Reference
UL approval: UL508 for industrial control devices
UL1950 for information processing equipment including business machines
CSA approval: CSA C22.2 No. 14 for industrial control devices
CSA C22.2 No. 950 for information processing equipment including business machines
VDE - EN60255-1-00: 1997 and EN60255-23: 1996(File No. 5381UG)
Model
Coil ratings
Contact ratings
NO contact
NC contact
G7J-4A-B(P) (T)
G7J-2A2B(P) (T)
G7J-3A1B-B(P) (T)
6, 12, 24, 48, 100 VDC
24, 50, 100 to 120, 200 to 240 VAC
25 A 240 VAC cosφ = 0.4
25 A 240 VAC cosφ = 1
25 A 30 VDC L/R ≥ 1
8 A 240 VAC cosφ = 0.4
8 A 240 VAC cosφ = 1
8 A 30 VDC L/R ≥ 1
Note: Add the suffix “-KM” to the model number when ordering.
KEMA - EN60947-4-1 and IEC947-4-1 for contacts (File No. 2001291.02)
Model
Coil ratings
Contact ratings - NO contact
G7J-4A-B(P) (T) (Z)
G7J-2A2B(P) (T)
G7J-3A1B-B(P) (T) (Z)
200 to 240 VAC
Class AC1: 25 A at 220 VAC
11.5 A at 380 to 480 VAC
Class AC3: 11.5 A at 220 VAC and 8.5 A at 380
to 480 VAC
6, 12, 24, 48, 100 VDC
24, 50, 100 to 120, 200 to 240 VAC
*Class AC1: 1 A at 220 VAC
Note: Add the suffix “-KM” to the model number when ordering. *This rating is the bifurcated contact rating.
Precautions
Note: Be sure to read the precautions and information common to all relays, contained in the Technical User’s Guide,
“Electromechanical Relays - Technical Information”, for correct use.
Allow suitable slack on leads when wiring, and do not subject the ter-
minals to excessive force.
■ Correct Use
Installation
Tightening torque: 0.98 N·m
PCB Terminal-equipped Relays weigh approximately 140 g. Be sure that
the PCB is strong enough to support them. We recommend dual-side
through-hole PCBs to reduce solder cracking from heat stress.
Do not impose excessive external force on the G7J in the horizontal
or vertical directions when inserting the G7J to the Faston receptacle
or pulling the G7J out from the Faston receptacle. Do not attempt to
insert or pull out more than one G7J Unit together.
Mount the G7J with its test button facing downwards. The Relay may
malfunction due to shock if the test button faces upwards. Be careful
not to press the test button by mistake because the contacts will go
ON if the test button is pressed.
Do not solder the tab terminals.
Operating Coil
Internal Connections of Coils
Be sure to use the test button for test purposes only.
The test button is used for Relay circuit tests, such as a circuit conti-
nuity test. Do not attempt to switch the load with the test button. If a
voltage is applied to the coil, the test button will retract in an ON state
(i.e., an excited state).
DC coil
A2
A2
A1
A1
Micro Loads
AC coil
The G7J is used for switching power loads, such as motor, trans-
former, solenoid, lamp, and heater loads. Do not use the G7J for
switching minute loads, such as signals. Use a Relay with a bifur-
cated contact construction for switching micro loads, in which case,
however, only SPST-NO or SPST-NC output is obtained.
If a transistor drives the G7J, check the leakage current, and connect
a bleeder resistor if necessary.
Soldering PCB Terminals
Be sure to solder the PCB terminals manually only. In the case of
automatic soldering, some flux may stick to the test button and the
G7J. As a result, the G7J may malfunction.
The AC coil is provided with a built-in full-wave rectifier that prevens
contact chatter during a voltage drop. This circuit allows the relays to
withstand, with no vibration or shock, voltage drops to the coil of up
to 50% of the rated coil voltage for 1 second max.
The G7J is not of enclosed construction. Therefore, do not wash the
G7J with water or any detergent.
If a triac, such as an SSR, drives the AC coil of the G7J, the G7J may
not release. Be sure to perform a trial operation with the G7J and the
triac before applying them to actual use.
Connecting
Refer to the following diagram when connecting a wire with a screw
terminal to the G7J.
7.6
8.8
7
4.5
M3.5
304
General Purpose Relay G7J
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-
citizens of regulated technology or information.
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
General Purpose Relay G7J
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-
dards, codes or regulations which apply to the combination of the Product in
gramming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
02/10
Specifications subject to change without notice
Printed in USA
Cat. No. X301-E-1A
General Purpose Relay G7J
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明