P2RVC-8-O-5 [OMRON]
Global standard size, low profile slim (6.2 mm width) I/O relays;型号: | P2RVC-8-O-5 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Global standard size, low profile slim (6.2 mm width) I/O relays |
文件: | 总31页 (文件大小:2878K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Slim I/O Relays
G2RV-SR/G3RV-SR
Global standard size, low profile
slim (6.2 mm width) I/O relays
G2RV-SR:
G3RV-SR:
• 25% lower profile than conventional products, contributing
to a smaller control panel.
• Push-In Plus terminal blocks reduce wiring work by 60%*
compared to conventional screw terminals.
• ‘Hand-free’ structure that holds an inserted flat-blade
screwdriver to achieve easier wiring work for stranded
wires.
• Electromechanical relays (G2RV-SR) and solid state
relays (G3RV-SR) are available.
• Screw terminal terminal block models are available.
• Plug-in terminal has strong mechanical pins that do not
bend.
* According to OMRON actual measurement data from November 2015.
For the recent information on models that have been certified
for safety standards, refer to your OMRON website.
Refer to Safety Precautions on page 20.
Slim I/O Relay Types
G2RV-SR series mounted relay: electromagnetic relay ......from page 2
G3RV-SR series mounted relay: solid state relay ................from page 10
Common matter
Common precautions................................................................from page 20
Common accessories (order separately).................................page 24
1
Slim Electromechanical I/O Relay
G2RV-SR
Global standard size, low profile,
slim (6.2 mm width) I/O relay
• 25% lower profile than conventional products, contributing
to a smaller control panel.
• Opening and closing ability with one pole 6 A slim shape.
• Micro load products for one pole 50 mA using gold-plated
contacts for small load switching also available.
• Since G2RV has a transparent case, confirming the state
of the contact with the naked eye is possible.
• Screw terminal terminal block models are available.
• Plug-in type terminal has strong mechanical pins that do
not bend.
For the recent information on models that have been certified
for safety standards, refer to your OMRON website.
Refer to Safety Precautions on page 20.
Features
With latching lever
Push-In Plus Terminal Block
Standard model/Micro load
(Test switch)
Terminal x 5
• Push-in
• Screw
Short bar insertion holes
Protective cover
(Released state)
Operation
display LED
(Socket section)
Release hole
Release lever
Protective cover
(Locked condition)
Latching lever
(Test switch)
Terminal (insertion) hole
Latching lever
(Test switch)
• Circuit check operation
Confirmation, reducing the inspection effort
Mechanical
indicator
• Operation
verification
which is linked
to the contact
PAT
"Foreign matter intrusion prevention structure"
"Malfunction prevention stopper"
Transparent case
Relay contact
Easy confirmation
of the situation
Release lever
Relay easily
fixed/removed
90 mm
Plug-in terminal
Terminal has strong
mechanical pins that
do not bend.
80 mm
2
G2RV-SR
Model Number Structure
Model Number Legend
G2RV-SR @@ @ - @ @
(1)
(2) (3) (4) (5) (6)
(1) Basic model name
G2RV: Slim I/O Relay
(3) Terminal (wire connection)
50: Push-In Plus Terminal
70: Screw terminal
(5) Contact structure
Blank: Standard
AP: Microloads
(2) Sub type
(6) Rated input voltage
12, 24 VDC
24, 48 VAC/VC
SR: Slim relay + integrated low profile socket
(4) Latching lever (test switch)
0: Without latching lever
1: With latching lever
100, 110, 200, 230 VAC
Ordering Information
Terminal
(Wire connection)
Latching lever
(Test switch)
Classification
Rated input voltage (V)
Model
12
G2RV-SR500 DC12
DC
24
G2RV-SR500 DC24
24
G2RV-SR500 AC/DC24
G2RV-SR500 AC/DC48
G2RV-SR500 AC100
AC/DC
48
No
100
110
200
230
24
Standard
G2RV-SR500 AC110
AC
G2RV-SR500 AC200
G2RV-SR500 AC230
DC
G2RV-SR501 DC24
Push-In Plus
Terminal
Yes
AC/DC
24
G2RV-SR501 AC/DC24
G2RV-SR500-AP DC12
G2RV-SR500-AP DC24
G2RV-SR500-AP AC/DC24
G2RV-SR500-AP AC/DC48
G2RV-SR500-AP AC100
G2RV-SR500-AP AC110
G2RV-SR500-AP AC200
G2RV-SR500-AP AC230
G2RV-SR700 DC12
12
DC
24
24
AC/DC
48
Microloads
No
100
110
200
230
12
AC
DC
24
G2RV-SR700 DC24
24
G2RV-SR700 AC/DC24
G2RV-SR700 AC/DC48
G2RV-SR700 AC100
AC/DC
48
No
100
110
200
230
24
Standard
G2RV-SR700 AC110
AC
G2RV-SR700 AC200
G2RV-SR700 AC230
DC
G2RV-SR701 DC24
Screw terminal
Yes
AC/DC
24
G2RV-SR701 AC/DC24
G2RV-SR700-AP DC12
G2RV-SR700-AP DC24
G2RV-SR700-AP AC/DC24
G2RV-SR700-AP AC/DC48
G2RV-SR700-AP AC100
G2RV-SR700-AP AC110
G2RV-SR700-AP AC200
G2RV-SR700-AP AC230
12
DC
24
24
AC/DC
48
Microloads
No
100
110
200
230
AC
Note: Solid wire cannot be used for Push-In Plus terminal type. Make sure to use stranded wire or stranded wire with ferrules.
3
G2RV-SR
Relay for Maintenance
Model Number Legend
G2RV-1-SI-G
G2RV-1-S-G(-AP)
G2RV-1 - S @ - @ - G @
(1) (2) (3) (4) (5) (6)
(1) No. of poles
1: 1 pole
(4) Contact material
Blank: Silver alloy
AP: Silver alloy + gold plate
(2) Terminal
(5) Types of relay for exchange
G: G2RV-SR series equipped
Relay
S: plug-in
(3) Latching lever (Test switch)
Blank: Without latching lever
I: With latching lever
(6) Rated coil voltage
Number: 11, 21, 48 VDC
List of Models
Latching
Lever
(Test switch)
Rated coil
voltage (V)
Type
Model
Applicable model
11
G2RV-1-S-G DC11
G2RV-1-S-G DC21
G2RV-SR700/500 DC12V
G2RV-SR700/500 DC24V
G2RV-SR700/500 AC/DC24V
G2RV-SR700/500 AC/DC48V
G2RV-SR700/500 AC100V
G2RV-SR700/500 AC110V
G2RV-SR700/500 AC200V
G2RV-SR700/500 AC230V
G2RV-SR701/501 DC24V
G2RV-SR701/501 AC/DC24V
G2RV-SR700/500-AP DC12V
G2RV-SR700/500-AP DC24V
21
48
No
DC
DC
DC
Standard
G2RV-1-S-G DC48
Yes
21
11
21
G2RV-1-SI-G DC21
G2RV-1-S-AP-G DC11
G2RV-1-S-AP-G DC21
G2RV-SR700/500-AP AC/DC24V
G2RV-SR700/500-AP AC/DC48V
G2RV-SR700/500-AP AC100V
G2RV-SR700/500-AP AC110V
G2RV-SR700/500-AP AC200V
G2RV-SR700/500-AP AC230V
Microload No
48
G2RV-1-S-AP-G DC48
4
G2RV-SR
Specifications
Ratings
Coil ratings
Operation
voltage
Maximum
allowable voltage
Release
voltage
Rated current
Power consumption
Rated input
voltage
AC
Percentage of the
rated voltage
DC
Percentage of the rated voltage
AC (VA)
DC (mW)
50 Hz
60 Hz
12 VDC
–
–
–
–
27.2 mA
–
–
Approx. 300 mW
Approx. 300 mW
24 VDC
13.3 mA
24 VAC/VDC
48 VAC/VDC
100 VAC
110 VAC
200 VAC
230 VAC
21.1 mA 22.5 mA
13.0 mA
Approx. 0.5 VA Approx. 300 mW
Approx. 0.4 VA Approx. 250 mW
8.5 mA
7.1 mA
7.1 mA
7.2 mA
7.3 mA
9.0 mA
7.5 mA
7.5 mA
7.9 mA
7.9 mA
5.2 mA
80% max.*
10% min.
110%
–
–
–
–
Approx. 0.8 VA
Approx. 0.8 VA
Approx. 1.7 VA
Approx. 1.7 VA
–
–
–
–
Note: The operating characteristics are measured at ambient temperature of 23°C.
* Operating voltage will be 85% max. for upside down mounting.
Contact ratings
Item
Standard (G2RV-SR700, 500, 701, 501)
For microloads (G2RV-SR700-AP, 500-AP) *2
Contact configuration
SPDT
Resistive load
(cosφ=1)
Inductive load
(cosφ=0.4, L/R=7ms)
Resistive load
(cosφ=1)
Load
6 A at 250 VAC
6 A at 30 VDC
2.5 A at 250 VAC
2 A at 30 VDC
50 mA at 30 VAC
50 mA at 36 VDC
Rated load
Rated carry current
6 A
50 mA
Maximum switching voltage
Maximum switching current
440 VAC, 125 VDC
6 A
30 VAC, 36 VDC
50 mA
1,500 VA
180 W
500 VA
60 W
Maximum switching power
–
Failure rate P value
(reference value) *1
10 mA at 5 VDC
1 mA at 100 mVDC
*1. P level: λ60=0.1×10-6/times
This value is the value in switching frequency 120 operations/min.
*2. If the gold plating layer is destroyed, the number will be the same as the standard type.
Characteristics
Item
Contact resistance *
Operate (Set) time *
Standard (G2RV-SR700, 500, 701, 501)
100 mΩ max.
For microloads (G2RV-SR700-AP, 500-AP)
20 ms max.
AC, AC/DC: 40 ms max.
DC: 20 ms max.
Release time *
Mechanical: 18,000 operations/h
Electrical: 1,800 operations/h (rated load)
Maximum operating frequency
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Between coil and contacts: 4,000VAC 50/60 Hz 1 min
Contact between the same polarity: 1,000 VAC 50/60 Hz 1 min
Dielectric strength
Destruction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Malfunction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Vibration resistance
Shock resistance
Destruction: 1,000 m/s2
Malfunction: Energized 200m/s2, Non-energized 100m/s2
Mechanical 5,000,000 operations min.
Endurance *
NO contact: 70,000 operations min.
5,000,000 operations min.
Electrical
NC contact: 50,000 operations min.
Ambient operating temperature Operating: –40 to +55°C (with no icing or condensation)
Ambient operating humidity
Weight
Operating: 5 to 85% RH
Approx. 30 g
Contact material
Ag alloy
Ag alloy + Au plating
Note: Above values are initial values.
* Value is at ambient temperature of 23°C.
5
G2RV-SR
Approved standards
UL508 (file No.E41643)
Model
No. of poles
Operation coil ratings
Contact ratings
Operations
6 A at 250 VAC (Resistive load)
6 A at 30 VDC (Resistive load)
2 A at 400 VAC (Resistive
load)*
12 to 48 VDC
24 to 230 VAC
G2RV-SR series
SPDT
6,000
* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).
12 mm 12 mm 12 mm
VDE (EN 61810-1)
Model
No. of poles
Operation coil ratings
12, 24 VDC
24, 48 VAC/VDC
100, 110, 200, 230 VAC
Contact ratings
Operations
6 A at 250 VAC (Resistive load)
6 A at 30 VDC (Resistive load)
2 A at 400 VAC (Resistive
load)*
50,000
50,000
6,000
G2RV-SR series
SPDT
* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).
12 mm 12 mm 12 mm
Engineering Data
Endurance curve (N.O. side)
Switching capacity of DC resistive load
10.0
1000
30 VDC resistive load
250 VAC resistive load
1.0
100
30 VDC
resistive load
250 VAC resistive load
10
0
0.1
2
4
6
20
60
100
140
180
220
Opening and closing current (A)
DC switching voltage (V)
6
G2RV-SR
Dimensions
(unit: mm)
Slim I/O Relay + socket
Push-In Plus Terminal Block
Models without latching lever (without test switch)
G2RV-SR500
G2RV-SR500-AP
Terminal Arrangement/Internal Connection Diagram
(TOP VIEW)
12 VDC
78 max.
Input circuit
A1
A2
G2RV
3.4
74.5
65.89
Other voltage
35.25
18.78
Input circuit
(5.05)
A1
A2
G2RV
12
14
11
78.77
35.3
90 max.
24 VDC
Input circuit
12
14
A1
A2
G2RV
11
*
: Diode bridge
(5.05)
: Light emitting diode
18.78
35.25
51.72
59.71
6.2 max.
12
14
11
Models with latching lever (with test switch)
G2RV-SR501
Terminal Arrangement/Internal Connection Diagram
(TOP VIEW)
12 VDC
81 max.
Input circuit
A1
A2
G2RV
3.4
77.5
65.89
Other voltage
Input circuit
A1
35.25
18.78
(5.05)
A2
G2RV
12
14
11
78.77
24 VDC
35.3
90 max.
Input circuit
A1
A2
12
14
G2RV
11
*
: Diode bridge
(5.05)
: Light emitting diode
18.78
35.25
51.72
59.71
6.2 max.
12
14
11
7
G2RV-SR
Screw terminal
Models without latching lever (without test switch)
G2RV-SR700
Terminal Arrangement/Internal Connection Diagram
(TOP VIEW)
G2RV-SR700-AP
12 VDC
Input circuit
A1
78 max.
A2
G2RV
3.4
74.5
65.89
Other voltage
35.18
18.71
Input circuit
A1
(5.05)
A2
G2RV
12
14
11
78.77
35.3
90 max.
24 VDC
Input circuit
12
14
A1
A2
G2RV
11
*
: Diode bridge
(5.05)
18.71
35.18
51.65
56.2
: Light emitting diode
6.2 max.
12
14
11
Models with latching lever (with test switch)
G2RV-SR701
Terminal Arrangement/Internal Connection Diagram
(TOP VIEW)
12 VDC
Input circuit
A1
81 max.
77.5
A2
G2RV
3.4
Other voltage
Input circuit
A1
65.89
35.18
18.71
(5.05)
A2
G2RV
12
14
11
78.77
24 VDC
35.3
90 max.
Input circuit
12
14
A1
A2
G2RV
11
*
: Diode bridge
(5.05)
18.71
35.18
51.65
56.2
: Light emitting diode
6.2 max.
12
14
11
8
G2RV-SR
Relay for maintenance
Models without latching lever
G2RV-1-S-G
G2RV-1-S-AP-G
5.2 max.
30.5 max.
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
33 max.
(Input circuit)
16.2
12
A1 A2
14 11
1.8
0.5
2.4
3.5
5.04
5.04
22
3
Models with latching lever (test switch)
G2RV-1-SI-G
5.2 max.
30.5 max.
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
(Input circuit)
36 max.
12
A1 A2
14 11
16.2
0.5
1.8
2.4
3.5
5.04
5.04
22
3
9
GSlim3I/ORSoVlid S-tSateRRelay
Global standard size, low profile, slim
(6.2 mm width) I/O solid state relay.
• 25% lower profile than conventional products, contributing to a
smaller control panel.
• Optimal slim, high frequency, high-speed opening and closing
SSR (solid state relay).
• Slim shape with a switching capacity up to 3 A (DC), and
2 A (AC).
• Because MOSFET is used for the outlet element for the DC
load, opening and closing load of 100 µA to 3 A is possible.
• Check operating status at a glance with the operating display
LED.
• Mounted I/O SSR (solid-state relay) uses plug-in terminals with
strong mechanical pins that do not bend.
For the recent information on models that have been certified
for safety standards, refer to your OMRON website.
Refer to Safety Precautions on page 20.
Features
Push-In Plus Terminal Block
Terminal x 5
• Push-in
• Screw
Short bar insertion holes
Release hole
Operation display LED
(Socket section)
Release lever
Operation
display LED
(SSR section)
Terminal (insertion) hole
Release lever
Relay easily
fixed/removed
90 mm
Plug-in terminal
Terminal has strong
mechanical pins that
do not bend.
80 mm
10
G3RV-SR
Model Number Structure
Model Number Legend
G3RV-SR @ @ @ - @ @
(1)
(2)
(3)
(4) (5)
(1) Basic model name
G3RV: Slim I/O Solid State Relay
(4) Output voltage specification
: AC output (triac) zero cross function available
AL : AC output (triac) zero cross function not available
: DC output (MOS FET)
A
(2) Sub type
D
SR: Slim solid relay + integrated low profile socket
(5) Rated voltage input
12, 24 VDC
24, 48 VAC/VDC
(3) Terminal (wire connection)
500: Push-In Plus Terminal
700: Screw terminal
100, 110, 200, 230 VAC
11
G3RV-SR
Ordering Information
Terminal
(wire connection)
Applicable
output load
Zero cross
function
Rated input voltage
(V)
Model
12
G3RV-SR500-D DC12
G3RV-SR500-D DC24
G3RV-SR500-D AC/DC24
G3RV-SR500-D AC/DC48
G3RV-SR500-D AC100
G3RV-SR500-D AC110
G3RV-SR500-D AC200
G3RV-SR500-D AC230
G3RV-SR500-A DC12
G3RV-SR500-A DC24
G3RV-SR500-A AC/DC24
G3RV-SR500-A AC/DC48
G3RV-SR500-A AC100
G3RV-SR500-A AC110
G3RV-SR500-A AC200
G3RV-SR500-A AC230
G3RV-SR500-AL DC12
G3RV-SR500-AL DC24
G3RV-SR500-AL AC/DC24
G3RV-SR500-AL AC/DC48
G3RV-SR500-AL AC100
G3RV-SR500-AL AC110
G3RV-SR500-AL AC200
G3RV-SR500-AL AC230
G3RV-SR700-D DC12
G3RV-SR700-D DC24
G3RV-SR700-D AC/DC24
G3RV-SR700-D AC/DC48
G3RV-SR700-D AC100
G3RV-SR700-D AC110
G3RV-SR700-D AC200
G3RV-SR700-D AC230
G3RV-SR700-A DC12
G3RV-SR700-A DC24
G3RV-SR700-A AC/DC24
G3RV-SR700-A AC/DC48
G3RV-SR700-A AC100
G3RV-SR700-A AC110
G3RV-SR700-A AC200
G3RV-SR700-A AC230
G3RV-SR700-AL DC12
G3RV-SR700-AL DC24
G3RV-SR700-AL AC/DC24
G3RV-SR700-AL AC/DC48
G3RV-SR700-AL AC100
G3RV-SR700-AL AC110
G3RV-SR700-AL AC200
G3RV-SR700-AL AC230
DC
24
24
AC/DC
48
DC load
AC load
DC load
AC load
—
Yes
No
—
100
110
AC
200
230
12
DC
24
24
AC/DC
48
Push-In Plus Terminal
100
110
AC
200
230
12
DC
24
24
AC/DC
48
100
110
AC
200
230
12
DC
24
24
AC/DC
48
100
110
AC
200
230
12
DC
24
24
AC/DC
48
Screw terminal
Yes
100
110
AC
200
230
12
DC
24
24
AC/DC
48
No
100
110
AC
200
230
Note: Solid wire cannot be used for Push-In Plus terminal type. Make sure to use stranded wire or stranded wire with ferrules.
12
G3RV-SR
Solid state relay for maintenance
Model Number Legend
G3RV-@ @ S @ @
(1) (2) (3) (4) (5)
(1) Output voltage
specification
D: DC output
(3) Terminal
S: Plug-in type
(4) Zero cross functions
2: AC output
Blank: Zero cross function available
L: Zero cross function not available
(2) Rated current
02: AC output 2 A
03: DC output 3 A
(5) Rated input voltage
Number: 12, 24, 48 VDC
List of Models
Rated
output
Load *
Rated input
voltage
(socket)
Insulation Operation Output Zero cross
Model
Applicable model
method
Display
(SSR) Function
12 VDC
G3RV-202S DC12
G3RV-202S DC24
G3RV-SR700/500-A DC12V
G3RV-SR700/500-A DC24V
24 VDC
24 VAC/VDC
48 VAC/VDC
100 VAC
110 VAC
200 VAC
230 VAC
12 VDC
G3RV-SR700/500-A AC/DC24V
G3RV-SR700/500-A AC/DC48V
G3RV-SR700/500-A AC100V
G3RV-SR700/500-A AC110V
G3RV-SR700/500-A AC200V
G3RV-SR700/500-A AC230V
G3RV-SR700/500-AL DC12V
G3RV-SR700/500-AL DC24V
G3RV-SR700/500-AL AC/DC24V
G3RV-SR700/500-AL AC/DC48V
G3RV-SR700/500-AL AC100V
G3RV-SR700/500-AL AC110V
G3RV-SR700/500-AL AC200V
G3RV-SR700/500-AL AC230V
G3RV-SR700/500-D DC12V
G3RV-SR700/500-D DC24V
G3RV-SR700/500-D AC/DC24V
G3RV-SR700/500-D AC/DC48V
G3RV-SR700/500-D AC100V
G3RV-SR700/500-D AC110V
G3RV-SR700/500-D AC200V
G3RV-SR700/500-D AC230V
Yes
G3RV-202S DC48
2 A
(at 100 to
240
Photo-
triac
AC
G3RV-202SL DC12
G3RV-202SL DC24
VAC)
24 VDC
24 VAC/VDC
48 VAC/VDC
100 VAC
110 VAC
200 VAC
230 VAC
12 VDC
Yes
(green)
No
G3RV-202SL DC48
G3RV-D03SL DC12
G3RV-D03SL DC24
24 VDC
24 VAC/VDC
48 VAC/VDC
100 VAC
110 VAC
200 VAC
230 VAC
Photo-
voltage
coupler
3 A
(at 5 to
24 VDC)
DC
–
G3RV-D03SL DC48
* Different depending on the ambient temperature.
For more details, refer to Load current vs. ambient rated temperature on page 16.
13
G3RV-SR
Specifications
Rating (ambient temperature 25°C)
Input
G3RV-SR700/500-A series
Rated current
Input voltage
Rated input
voltage
Release
voltage
Operation
voltage
AC
Percentage of the
rated voltage
DC
50 Hz
60 Hz
12 VDC
–
–
–
–
15 mA
10.8 V max.
21.6 V max.
21.6 V max.
43.2 V max.
90 V max.
24 VDC
12 mA
24 VAC/VDC
48 VAC/VDC
100 VAC
20 mA
10 mA
7.5 mA
7.5 mA
7.3 mA
7.3 mA
21 mA
11 mA
7.5 mA
7.7 mA
8.6 mA
8.6 mA
11 mA
6 mA
1 V min.
10%
–
–
–
–
110 VAC
99 V max.
200 VAC
180 V max.
207 V max.
230 VAC
G3RV-SR700/500-AL series
Rated current
AC
Input voltage
Release
voltage
Operation
voltage
Rated input
voltage
Percentage of the
rated voltage
DC
50 Hz
60 Hz
12 VDC
–
–
–
15 mA
10.8 V max.
21.6 V max.
21.6 V max.
43.2 V max.
90 V max.
24 VDC
–
12 mA
24 VAC/VDC
48 VAC/VDC
100 VAC
20 mA
10 mA
7.5 mA
7.5 mA
7.3 mA
7.3 mA
21 mA
11 mA
7.7 mA
7.7 mA
8.6 mA
8.6 mA
11 mA
6 mA
1 V min.
10%
–
–
–
–
110 VAC
99 V max.
200 VAC
180 V max.
207 V max.
230 VAC
G3RV-SR700/500-D series
Rated current
AC
Input voltage
Rated input
voltage
Operation
voltage
Release
voltage
Percentage of the
rated voltage
DC
50 Hz
60 Hz
12 VDC
–
–
–
8 mA
10.8 V max.
21.6 V max.
21.6 V max.
43.2 V max.
90 V max.
24 VDC
–
4.5 mA
24 VAC/VDC
48 VAC/VDC
100 VAC
10.7 mA 11.1 mA 4.3 mA
9.6 mA
6.8 mA
6.8 mA
6.8 mA
6.8 mA
10.2 mA 6 mA
10%
1 V min.
7.2 mA
7.2 mA
8.1 mA
8.1 mA
–
–
–
–
110 VAC
99 V max.
200 VAC
180 V max.
207 V max.
230 VAC
Output
Item
G3RV-SR700/500-A(L)
G3RV-SR700/500-D
Rated load voltage
Load voltage range
Load current
100 to 240 VAC (50/60 Hz)
75 to 264 VAC (50/60 Hz)
5 to 24 VDC
3 to 26.4 VDC
0.1 to 2 A (Ambient temperature=25°C) 100 µA to 3 A (Ambient temperature=25°C)
Inrush current resistance
Permissible l2t; Joule integral value
(reference value)
30 A (60 Hz, 1 cycle)
15A2s
30 A (60 Hz, 1 cycle)
9 A2 s
400 W
72 W
Applied load capacity
(Output voltage: 200 VAC)
(Output voltage: 24 VDC)
14
G3RV-SR
Characteristics
Item
G3RV-SR700/500-A
G3RV-SR700/500-AL
3 ms max.
60 ms max.
G3RV-SR700/500-D
6 ms max.
1/2 cycle of load power supply
+1 ms max.
Operate time
Release time
60 ms max.
60 ms max.
–
Output ON voltage drop
Output ON resistance
1.6 V (RMS) max.
–
0.3 Ω max. (at 24 VDC)
Leakage current
5 mA max. (at 200 VAC, 50/60 Hz)
10 µA max. (at 24 VDC)
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
100 MΩ min. (at 500 VDC)
Between input and output 2,500 VAC 50/60 Hz 1 min
Malfunction: 10 to 55 to 10 Hz double amplitude 0.70 mm
300m/s2
Storage: –30 to +100°C (with no icing or no condensation)
Operating: –30 to +55°C (with no icing or no condensation)
Ambient operating temperature
Ambient operating humidity
Weight
45 to 85% RH
Approx. 38 g
2
Pollution degree
The degree of protection by
IEC60529
IP20
Rated impulse dielectric
strength
4.0 kV/III
Load category
LC-A
DC-12
1.5Ie 1.1Ue
5s ON, 10s OFF, 10 cycles
Overload current profile
Rated insulation voltage
240 V
Approved standards
UL 508 (file No.E64562)
Model
Input ratings
12, 24 VDC
24, 48 VAC/VDC
Contact ratings
24 VDC 3 A (resistive load) at 25°C
G3RV-SR700/500-D series
G3RV-SR700/500-A(L) series
100, 110, 200, 230 VAC
12, 24 VDC
24, 48 VAC/DC
240 VAC 2 A (resistive load) at 25°C
100, 110, 200, 230 VAC
TÜV 62314
Model
Input ratings
Contact ratings
12, 24 VDC
24, 48 VAC/VDC
100, 110, 200, 230 VAC
G3RV-SR700/500-D series
G3RV-SR700/500-A(L) series
24 VDC 3 A (resistive load)
12, 24 VDC
24, 48 VAC/VDC
100, 110, 200, 230 VAC
240 VAC 2 A (resistive load)
15
G3RV-SR
Engineering Data
Load current vs. ambient rated temperature
G3RV-SR700/500-A(L) series
Product mounting spacing 10 mm (Separate Mounting)
Close mounting (up to 5 units *)
5
5
4
3
2
4
3
2
1
1
0
0.2
0
−30 −20
−30 −20
0
20 25 40 55 60
80
100
0
20 25 40 55 60
80
100
Ambient temperature (°C)
Ambient temperature (°C)
G3RV-SR700/500-D series
Product mounting spacing 10 mm (Separate Mounting)
Close mounting (up to 5 units *)
5
5
4
3
2
4
3
2
1
1
0
0.5
0
−30 −20
0
20 25 40 55 60
80
100
−30 −20
0
20 25 40 55 60
80
100
Ambient temperature (°C)
Ambient temperature (°C)
* When five or more are installed, install with 10 mm space between
each.
For details, please refer to Mounting on page 23.
Inrush Current Resistance: Non-repetitive
Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively.
G3RV-SR700/500-A(L) series
G3RV-SR700/500-D series
40
40
35
30
35
30
25
20
15
10
5
25
20
15
10
5
0
0
10
30 50 100
300 500 1,000 3,000 5,000
Energized time (ms)
10
30 50 100
300 500 1,000 3,000 5,000
Energized time (ms)
16
G3RV-SR
Dimensions
(unit: mm)
Solid state relay + socket
Push-In Plus Terminal Block
G3RV-SR500
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
12 VDC
Input circuit
A1
78 max.
G3RV
A2
A2–
INPUT
3.4
74.5
A1+
65.89
13 (+)
35.25
18.78
OUTPUT
(5.05)
14 (–)
12
14
The information in
parentheses in for
a DC output.
13
78.77
35.3
90 max.
24 VDC
Input circuit
A1
A2
G3RV
A2–
INPUT
A1+
(5.05)
18.78
35.25
51.72
59.71
6.2 max.
13 (+)
OUTPUT
14 (–)
12
14
The information in
parentheses in for
a DC output.
13
Other voltage
Input circuit
A1
A2
G3RV
A2–
INPUT
A1+
13 (+)
OUTPUT
14 (–)
12
14
The information in
parentheses in for
a DC output.
13
*
: Diode bridge
: Light emitting diode
17
G3RV-SR
Screw terminal
G3RV-SR700
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
12 VDC
78 max.
Input circuit
A1
3.4
74.5
G3RV
A2
65.89
35.18
18.71
A2–
INPUT
(5.05)
A1+
13 (+)
OUTPUT
14 (–)
12
14
The information in
parentheses in for
a DC output.
78.77
35.3
90 max.
13
24 VDC
Input circuit
A1
A2
(5.05)
18.71
35.18
51.65
56.2
G3RV
6.2 max.
A2–
INPUT
A1+
13 (+)
OUTPUT
14 (–)
12
14
The information in
parentheses in for
a DC output.
13
Other voltage
Input circuit
A1
A2
G3RV
A2–
INPUT
A1+
13 (+)
OUTPUT
14 (–)
12
14
The information in
parentheses in for
a DC output.
13
*
: Diode bridge
: Light emitting diode
18
G3RV-SR
Solid state relay for maintenance
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
G3RV-D03SL
G3RV-202S(L)
G3RV-D03SL (input circuit)
Input
30.5 max.
Load
33 max.
15.8
14 13
G3RV-202S(L) (input circuit)
Input
A1 A2
1.8
3.5
2.4
22
3
5.04
5.2 max.
Load
14 13
A1 A2
19
G2RV-SR/G3RV-SR
Safety Precautions
Be sure to read the Safety Precautions for All Relays in the website at the following URL:
www.omron247.com.
Format of Warning Indications
Minor burns may occasionally occur.
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious
injury or death. Additionally, there may be
significant property damage.
Do not touch the G3RV or the heat sink while the
power is being supplied or immediately after the
power supply has been turned OFF.
WARNING
The G3RV becomes extremely hot.
Provide a space of at least 3 mm between the G2RV-
SR and ground. Not doing so may result in a ground
fault.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or in property damage.
CAUTION
Indicates supplementary comments on
what to do or avoid doing, to use the
product safety.
Precautions
for Safe Use
Precautions for Safe Use
Includes operating precautions to ensure
that the product will operate properly and
that performance and functions will not be
adversely affected.
Precautions
for Correct
Use
Transport
• Do not use the product if it has been dropped on the ground.
Dropping the product may adversely affect performance.
• Do not drop the product or subject it to abnormal vibration or shock
during transportation or mounting. Doing so may result in
deterioration of performance, malfunction, or failure.
• Do not transport the product without it being packaged. Doing so
may result in damage, malfunction, or failure.
• Do not transport the G3RV under the following conditions. Doing
so may result in damage, malfunction, or deterioration of
performance characteristics.
Meaning of Graphic Symbols for Ensuring Product Safety
Indicates the possibility of electric shock under
specific conditions.
Used for general CAUTION, WARNING, or
DANGER precautions for which there is no
specified symbol. (This symbol is also used as
the alerting symbol, but shall not be used in this
meaning on the product.)
• High temperature, high humidity conditions
• Conditions such as temperature change that causes rapid
condensation
Indicates the possibility of explosion or rupture
under specific conditions.
• Condition where it is not packaged
Indicates the possibility of injuries by high
temperature under specific conditions.
Operating and Storage Environments
• Do not use or store the product in the following locations. Doing so
may result in damage, malfunction, or deterioration of performance
characteristics.
WARNING
Ensure that the socket is not charged during wiring and
maintenance. Not doing so may result in electric shock.
• Do not store in locations subject to ambient storage
temperatures outside the range –40 to 70°C (for G2RV) and
outside the range –30 to 100°C (for G3RV).
• Locations subject to relative humidity outside the range 5% to
85% (for G2RV) and outside the range 45% to 85% (for G3RV).
• Locations subject to high temperature or high humidity.
• Conditions such as temperature change that causes rapid
condensation
Do not touch the terminal section of the G2RV-SR or
the surrounding area while the power is being
supplied. Doing so may result in electric shock.
CAUTION
• Locations where corrosive gases or flammable gases are present
• Location where rainwater or water droplets gets splashed
• Location with splashes of water, oil, and chemicals, etc.
• Locations with much dust, salt, and iron powder
• Location with blockers
Minor electrical shock may occasionally occur.
Do not touch the G3RV terminal section (i.e., current
carrying parts) while the power is being supplied.
• Where static electricity or noise occurs
The G3RV may rupture if short-circuit current flows.
As protection against accidents due to short-circuiting,
be sure to install protective devices, such as fuses and
no-fuse breakers, on the power supply side.
• Where strong electromagnetic field is generated
• Where there is a risk of exposure to radioactivity
• Do not use or store Sockets in environments that contain silicone
gas, sulfidizing gas (e.g., SO2 or H2S), or organic gas, or near
materials that contain silicone. Doing so may cause the contacts to
be unstable or to fail.
Minor electrical shock may occasionally occur.
Do not touch the main circuit terminals on the G3RV
immediately after the power supply has been turned
OFF.
Shock may result due to the electrical charge stored
in the built-in snubber circuit.
Handling <G3RV>
• Keep the G3RV well ventilated.
There is a risk of short-circuiting or burning due to G3RV
overheating.
Note: G3RV-202S(L), G3RV-SR500/700-A(L) series
models only
20
G2RV-SR/G3RV-SR
Mounting
Precautions for Correct Use
• Before you start wiring, please make sure that the socket is
securely attached to the mounting rail. If the socket is unstable, it
may come loose with a risk of injury towards the workers.
• Please insert the flat-blade screwdriver to the bottom of the hole. If
you do not insert the flat-blade screwdriver correctly, the cable will
not be connected correctly.
• Do not use or store the product in the following locations. Doing so
may result in damage, malfunction, or deterioration of performance
characteristics.
• Where vibration or shock is directly transmitted to the body
• Do not use the product where the socket could touch a solvent
or alkaline agent.
• When lubricant such as oil is attached to the tip of the driver, the
driver will fall off, with a risk of injury towards the workers.
• Do not insert short bar in the hole for wire or screw driver, it may
cause the result of failure of pull out.
Usage
If insert short bar in the hole for wire or screw driver and try to pull
out, it may cause damage for short bar or socket.
• Please select the load within the rated range. Doing so may result
in damage, malfunction, or failure.
• Please use the power of the rated frequency. It may cause
malfunction, failure, or risk of burnout.
Push-In Plus Terminal Block
1. Connecting Wires to the Push-In Plus Terminal Block
Part Names of the Terminal Block
<G3RV>
• Install G3RV according to instructions Mounting on page 23. If you
install in the wrong direction, abnormal heat is generated, and may
lead to short-circuiting or burning the output element.
• G3RV is an SSR that generates heat. Please observe the ambient
temperature setting range of G3RV. If installing in an enclosed
space, set a fan, and ventilate.
Release hole
Terminal (Insertion) hole
• When mounting G3RV to DIN rail, firmly fit it into the groove. If it is
not properly installed, there is a risk of it falling.
Connecting Wires with Ferrules
Insert the ferrule straight into the terminal block until the end strikes
the terminal block.
Wiring
•
For the current to be applied, make sure a wire size with margin is used.
Otherwise, excessive heat generated by the wires may cause burning
.
Release hole
• Do not attempt to use the wire if the coat is torn. Not doing so may
result in electric shock.
Terminal
(Insertion) hole
• Always turn OFF the power supply before performing wiring. Not
doing so may cause electrical shock.
Ferrules
<G3RV>
Connecting Stranded Wires
• The wires of the socket for G3RV socket should not be passed
Use the following procedure to connect the wires to the terminal block.
(1) Hold a flat-blade screwdriver at an angle and insert it into the
release hole.
through the same duct as that being connected to the high-voltage
power supply. Otherwise, inductive noise may damage the G3RV
or cause it to malfunction.
The angle should be between 10°and15°. If the flat-blade
screwdriver is inserted correctly, you will feel the spring in the
release hole respond.
Push-In Plus Terminal Block
• Do not wire anything to the release holes.
(2) With the flat-blade screwdriver still inserted into the release hole,
insert the wire into the terminal hole until it strikes the terminal
block.
•
Do not tilt or twist a flat-blade screwdriver while it is inserted into a release
hole on the terminal block. The terminal block may be damaged
.
(3) Remove the flat-blade screwdriver from the release hole.
• Insert a flat-blade screwdriver into the release holes at an angle.
The terminal block may be damaged if you insert the screwdriver
straight in.
Flat-blade screwdriver
(3)
(1)
10 to 15°
(3)
• Do not allow the flat-blade screwdriver to fall out while it is inserted
into a release hole.
(1)
(2)
Stranded Wires
•
Do not bend the wire past its natural bending radius or pull on it
with excessive force. Doing so may cause the wire disconnection.
Checking Connections
• After insertion, pull gently on the wire to make sure that it will not
come out (i.e., to confirm that it is held by the terminal block).
• To prevent short circuits, insert the stripped part of a stranded
wire or the conductive part of a ferrule until it is hidden inside the
terminal insertion hole. (See following diagram.)
•
Do not insert more than one wire into each terminal (insertion) hole
.
• To prevent wiring materials from smoking or ignition, use the wiring
materials given in the following table.
Stripping length
Ferrules
When using
terminal
Ferrules
When not using
terminal
Recommended Wire
0.5 to 1.5 mm2/AWG20 to AWG16
10 mm
8 mm
Note: Use Ferrules with UL certification (R/C).
Disposal
• Do not dispose of the product by burning.
21
G2RV-SR/G3RV-SR
2. Removing Wires from the Push-In Plus Terminal Block
Use the following procedure to remove wires from the terminal block.
The same method is used to remove stranded wires and ferrules.
Screw Terminal
• Screw terminal
Applicable wire
size
Stripping
length
Wired type
(1) Hold a flat-blade screwdriver at an angle and insert it into the
release hole.
(2) With the flat-blade screwdriver still inserted into the release hole,
remove the wire from the terminal insertion hole.
(3) Remove the flat-blade screwdriver from the release hole.
Stranded wires, without
ferrule
0.5 to 1.5 mm2
0.5 to 1.5 mm2
0.5 to 1.5 mm2
8 mm
Stranded wires, with ferrule
and plastic collar
8 mm
8 mm
Flat-blade screwdriver
Stranded wires with ferrule,
without plastic collar
(3)
(1)
10 to 15°
Wire
(3)
(1)
• Tightening Torque
0.4 N · m
(2)
• Electric wiring
Use the electric wire of specified size as shown above. The
3. Recommended ferrules and tools
Recommended Ferrules
stripped wire length is 8 mm.
Applicable
Recommended ferrules
Screw terminal
Ferrules
Conduct
length
wire
Phoenix
Contact
product
Weidmuller
product
(mm2) (AWG)
Wago product
(mm)
8 mm
0.5
0.75
1
20
18
18
16
8
8
8
8
AI0.5-8
H0.5/14
H0.75/14
H1.0/14
H1.5/14
FE-0.5-8N-WH
FE-0.75-8N-GY
FE-1.0-8N-RD
FE-1.5-8N-BK
Stripping length
AI0.75-8
AI1-8
<G2RV>
1.5
AI1.5-8
Operating latching lever
When operating the latching lever for G2RV-SR701/501
series, use a 2.5 mm width flat-blade screwdriver.
CRIMPFOX6
CRIMPFOX6T-F PZ6 roto
CRIMPFOX10S
Recommended crimp
tool
Variocrimp4
*1. Make sure that the outer diameter of the wire is smaller than the
inner diameter of the insulating sleeve of the recommended
ferrule.
• Applicable flat-blade screwdriver
Flat-blade screwdriver with parallel cutting edge: shaft diameter
2.5 mm (3.0 mm max.)
*2. Make sure that the ferrule processing dimensions conform to the
following figure.
Parallel cutting edge flat-blade screwdriver
8 mm
Shaft diameter 2.5 mm (3.0 mm max.)
Wide flat-blade screwdriver
8 mm
2.1 mm max.
Driver with a thick shaft cannot be used.
Recommended Flat-blade Screwdriver
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
The following table is the manufacturer and format at the time in
December 2015.
• Always turn OFF the power supply before operating latching lever.
• Return to its original state after using the latching lever.
• Do not use the latching lever as a switch.
• Operation durability of the latching lever is 100 times or more.
• Do not keep the latching lever ON for a long period of time (24
hours or more) in order to maintain the operation check function.
Side
Front
2.5 mm dia.
0.4 mm
2.5 mm
Model
Manufacturer
XW4Z-00B
Omron
Wera
ESD0.40×2.5
SZF 0.4×2.5
Phoenix Contact
0.4×2.5×75 302
AEF.2.5×75
210-719
Wiha
Facom
Wago
SDI 0.4×2.5×75
Weidmuller
22
G2RV-SR/G3RV-SR
<Relationship of SSR and duct (duct depth)>
Method of operation of the latching lever
Incorrect Example
Countermeasure 1
Countermeasure 2
<Protective cover: locked> <Protective cover: disengage>
Recommended height of the duct is
Duct or other object
blocking airflow
Duct or other object
blocking airflow
Contact normal position
1/2 or less of the height of the SSR
Contact operating position (on-state)
Duct or
other object
blocking
airflow
Airflow
Height of SSR
Close protective cover
Open protective cover
Vertical
Direction
Metal
base
SSR
SSR
SSR
Duct or other object
blocking airflow
Duct or other object
blocking airflow
Duct or other object
blocking airflow
Do not enclose the SSR in a
duct of the same height.
It will interfere with the heat
dissipation of SSR.
Use ducts that have a
shallow depth, to provide a place the SSR on a metal base so
sufficient ventilation area. that it is not surrounded by the ducts.
If the ducts cannot be made lower,
Keep the protective cover open when using the latching lever. Move
until the latching lever clicks to the ON position (ON state). After
using the latching lever, in order to prevent malfunction, return the
switch to contact normal position (OFF state), and make sure the
protective cover is firmly closed.
<Ventilation Outside the Control Panel>
Be aware of airflow
Duct or other object
blocking airflow
Using the latching lever
Exhaust
(Axial fan)
Example: check the operation of the relay and the sequence circuit
SSR
SSR
SSR
<G3RV>
• Since the G3RV uses electronic components, do not allow it to fall,
vibrate, or apply shock that exceeds the criteria. Doing so may
result in failure, malfunction, or deterioration of performance.
• Tighten screw terminal for G3RV with a torque of 0.4 N · m. It may
cause short-circuit failure or burning.
Inlet
• If the air inlet or air outlet has a filter, clean the filter regularly to
prevent it from clogging to ensure an efficient flow of air.
• Do not place objects that may obstruct the proper ventilation for
outside or inside the inlet or exhaust port, and in the outside
vicinity.
• Please use the voltage and current suitable for the input and output
terminal portion of G3RV. It may cause short-circuit failure or
burning.
Mounting
• A heat exchanger, if used, should be located in front of the G3RV
to ensure the efficiency of the heat exchanger.
<The SSR Mounting Pitch (Panel Mounting)>
Duct or other object blocking airflow
• Please observe the ambient temperature of G3RV. The rated
current of the G3RV is measured at an ambient temperature of
25°C.
60 mm min.
10 mm min.
SSR
• The G3RV uses a semiconductor in the output element.
This causes the temperature inside the control panel to increase
due to heating resulting from the flow of electrical current through
the load. The G3RV reliability can be increased by adding a
ventilation fan to the control panel to dispel this heat, thus lowering
the ambient temperature of the G3RV.
Vertical Direction
30 mm min.
(It suggests that life expectancy is doubled by each 10°C reduction
in ambient temperature.)
80 mm min.
EMI
The G3RV is a Class A product (for industrial environments).
When used in a residential environment, it may cause radio
interference. In such case, the user may be required to take
appropriate measures.
* When five or more are installed, install with 10 mm space between
each.
23
G2RV-SR/G3RV-SR
For G2RV-SR/G3VR-SR
Common Accessories (order separately)
Ordering Information
Short Bars
Maximum
energizing
current
No.of
poles
Minimum order
(Quantity)
Appearance
Pitch
Colors
Model *
2
PYDN-6.2-020@
PYDN-6.2-030@
PYDN-6.2-040@
PYDN-6.2-100@
PYDN-6.2-200@
3
Red (R),
Blue (S),
Yellow (Y)
6.2 mm
4
10
32 A
10
20
Note: Use for wiring to the adjacent socket.
* Replace the box (@) in the model number with the code for the covering color. @ color selection: R = red, S = blue, Y = yellow
Labels
Appearance
Model
Minimum order
5 sheets
(1 sheet/72 pieces)
XW5Z-P2.5LB2
Separate Plate
Appearance
Model
XW5Z-EP12
PLC interface unit
Appearance
I/O classification
Common process
Connection method
Push-In
Model
P2RVC-8-I-5-1
P2RVC-8-I-7-1
P2RVC-8-I-5
PNP
For input
Screw
NPN
PNP
NPN
Push-In
Push-In
P2RVC-8-O-5-1
P2RVC-8-O-7-1
P2RVC-8-O-5
For output
Screw
Push-In
Parts for DIN Track Mounting
Minimum order
(Quantity)
Appearance
Type
Model
1 m
PFP-100N
DIN Tracks
–
0.5 m
PFP-50N
End Plate*
PFP-M
PFP-S
10
Spacer
* When mounting components to DIN rail, prevent sliding using end plates (Model PFP-M).
Refer to your OMRON website for details on PFP-@.
24
G2RV-SR/G3RV-SR
● Applicable Cables
Cable
length L
(mm)
Name
Appearance
Connecting Cables
Applicable Connectors
1,000
2,000
3,000
5,000
P2RV-A100C
P2RV-A200C
P2RV-A300C
P2RV-A500C
End A
Device
end
End B
PLC interface
unit end
Cables with Loose
Wires
P2RV-A@C
8 I/O
points
Various devices
L
70
1,000
2,000
3,000
5,000
1,000
2,000
3,000
5,000
1,000
2,000
3,000
5,000
P2RV-4-100C
P2RV-4-200C
Cables with
Connectors (1:4)
P2RV-4-@C
32 output
points
PLC I/O Units with MIL connectors (1:4)
CJ1W-OD232/OD262, etc.
P2RV-4-300C
P2RV-4-500C
P2RV-4-100IMC
P2RV-4-200IMC
P2RV-4-300IMC
P2RV-4-500IMC
P2RV-4-100IFC
P2RV-4-200IFC
P2RV-4-300IFC
P2RV-4-500IFC
L
L
L
300
300
300
Cables with
Connectors (1:4)
P2RV-4-@IMC
32 input
points
PLC I/O Units with MIL connectors (1:4)
CJ1W-ID232/ID262, etc.
Cables with
Connectors (1:4)
P2RV-4-@IFC
32 input
points
PLC I/O Units with Fujitsu connectors (1:4)
CJ1W-ID231/ID261, etc.
500
1,000
500
P2RV-A050C-OMR GRT1
P2RV-A100C-OMR GRT1
P2RV-A050IC-OMR GRT1
P2RV-A100IC-OMR GRT1
P2RV-A050C-OMR NX
P2RV-A100C-OMR NX
P2RV-A050IC-OMR NX
P2RV-A100IC-OMR NX
8 output
Cables with Connectors points
(1:1)
Slice I/O Units (1:1)
For inputs: GRT1-ID8-1
For outputs: GRT1-OD8-1
P2RV-A
@
C-OMR GRT1 8 input
points
L
L
1,000
500
8 output
points
Cables with
Connectors (1:1)
PLC I/O Units with MIL connectors (1:1)
For inputs: NX-ID4442
For outputs: NX-OD4256
1,000
500
P2RV-A@C-OMR NX 8 input
points
1,000
25
G2RV-SR/G3RV-SR
Cable
length L
(mm)
Name
Appearance
Connecting Cables
Applicable Connectors
500
P2RV-050C-SCH-A
P2RV-100C-SCH-A
P2RV-200C-SCH-A
P2RV-300C-SCH-A
P2RV-500C-SCH-A
P2RV-050C-SCH-B
P2RV-100C-SCH-B
P2RV-200C-SCH-B
P2RV-300C-SCH-B
P2RV-500C-SCH-B
P2RV-050C-SCH-C
P2RV-100C-SCH-C
P2RV-200C-SCH-C
P2RV-300C-SCH-C
P2RV-500C-SCH-C
P2RV-050C-SCH-D
P2RV-100C-SCH-D
P2RV-200C-SCH-D
P2RV-300C-SCH-D
P2RV-500C-SCH-D
P2RV-050C-SIM-A
P2RV-100C-SIM-A
P2RV-200C-SIM-A
P2RV-300C-SIM-A
P2RV-500C-SIM-A
P2RV-050C-SIM-B
P2RV-100C-SIM-B
P2RV-200C-SIM-B
P2RV-300C-SIM-B
P2RV-500C-SIM-B
End A
Device
end
End B
PLC interface
unit end
1,000
2,000
3,000
5,000
500
32 input
points
Schneider Electric PLCs with 32-point
connectors (1:4)
For inputs: 140 DDI 353 00
For outputs: 140 DDO 353 00
1,000
2,000
3,000
5,000
500
32 output
points
Schneider Electric
PLC Connecting
Cables
L
300
P2RV-@C-SCH-@
1,000
2,000
3,000
5,000
500
16 input
points
Schneider Electric PLCs with
16-point connectors (1:2)
For inputs: BMX DDI 1602
For outputs: BMX DDO 1602
1,000
2,000
3,000
5,000
500
16 output
points
L
300
1,000
2,000
3,000
5,000
500
32 input
points
Siemens PLCs with
32-point connectors (1:4)
For inputs: 6ES7 321-1BL00-0AA0
For outputs: 6ES7 322-1BL00-0AA0
1,000
2,000
3,000
5,000
32 output
points
L
L
L
300
300
300
500
P2RV-050C-SIM-C
P2RV-100C-SIM-C
P2RV-200C-SIM-C
P2RV-300C-SIM-C
P2RV-500C-SIM-C
1,000
2,000
3,000
5,000
Siemens PLC
16 input
Siemens PLCs with
16-point connectors (1:2)
For inputs: 6ES7 321-1BH02-0AA0
Connecting Cables
points
P2RV-@C-SIM-@
500
P2RV-050C-SIM-D
P2RV-100C-SIM-D
P2RV-200C-SIM-D
P2RV-300C-SIM-D
P2RV-500C-SIM-D
P2RV-050C-SIM-E
P2RV-100C-SIM-E
P2RV-200C-SIM-E
P2RV-300C-SIM-E
P2RV-500C-SIM-E
1,000
2,000
3,000
5,000
500
32 input
points
Siemens PLCs with
32-point connectors (1:4)
For inputs: 6ES7 421-1BL-0AA0
For outputs: 6ES7 422-1BL-0AA0
1,000
2,000
3,000
5,000
32 output
points
26
G2RV-SR/G3RV-SR
PLC interface unit
Ratings / characteristics
Rated voltage
Rated current
30 VAC/DC
0.5 A/poles, 2 A/unit
Ambient operating
temperature
−40 to 55°C
Electrical schematic
Input
P2RVC-8-I-@-1 (PNP)
P2RVC-8-I-5 (NPN)
1....................8
1....................8
14
14
11
11
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
Output
P2RVC-8-O-@-1 (PNP)
P2RVC-8-O-5 (NPN)
1....................8
1....................8
A2
A2
A1
A1
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
27
G2RV-SR/G3RV-SR
Dimensions
(unit: mm)
PLC interface unit
Push-IN
P2RVC-8-I-5(-1)
P2RVC-8-O-5(-1)
49.60
67.16
12.68
7×6.20
29
Screw
P2RVC-8-I-7-1
P2RVC-8-O-7-1
49.60
67.16
12.68
7×6.20
29
28
G2RV-SR/G3RV-SR
(Except for PLC interface unit)
Common Accessories
Dimensions
(unit: mm)
Short Bars
PYDN-6.2-@@ (6.2 mm)
Maximum carry
Pitch
No. of poles
L (Length)
Colors
Model *
current
2
3
12.4
18.6
24.8
62
PYDN-6.2-020@
PYDN-6.2-030@
PYDN-6.2-040@
PYDN-6.2-100@
PYDN-6.2-200@
2
1.20
9
L
Red (R)
Blue (S)
Yellow (Y)
6.2 mm
4
32 A
14
10
20
124
6.20
Note: Use the Short Bars for crossover wiring within one Socket or between Sockets.
* Replace the box (@) in the model number with the code for the covering color.
Separate Plate
XW5Z-EP12
56
12
63
Parts for DIN Track Mounting
Refer to your OMRON website for details on the PFP-@.
29
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a.Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer;
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid;
d.Delivery and shipping dates are estimates only; and
e.Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs
user’s programming of a programmable Product, or any consequence thereof.
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
(i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu
Authorized Distributor:
Controllers & I/O
• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O
Robotics
• Industrial Robots • Mobile Robots
Operator Interfaces
• Human Machine Interface (HMI)
Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters
Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems
Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors
Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays
Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products
Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays
Software
• Programming & Configuration • Runtime
J285I-E-01 06/16
Note: Specifications are subject to change.
© 2016 Omron. All Rights Reserved.
Printed in U.S.A.
Printed on recycled paper.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明