DFB2505 [ONSEMI]

玻璃钝化桥式整流器;


型号：	DFB2505
厂家：	ONSEMI
描述：	玻璃钝化桥式整流器局域网二极管
文件：	总5页 (文件大小：417K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

www.onsemi.com

Glass-Passivated Bridge

Rectifiers

DFB2505, DFB2510,

DFB2520, DFB2540,

DFB2560, DFB2580,

DFB25100

TS−6P

CASE 127EP

Features

 UL Certificate # E258596

 Glass−Passivated Junction

 Ideal for Printed Circuit Board

 Reliable Low−Cost Construction

MARKING DIAGRAM

 Plastic Material has Underwriters Laboratory Flammability

Classification 94V−0

ZYWW

DFB25XXX

 Surge Overload Rating: 350 A Peak

 High Case Dielectric Strength: 2500 V

RMS

 Isolated Voltage from Case to Lead: > 2500 V

 Screw Torque Specification: 8.17 in−lbs Maximum

 These Devices are Pb−Free and are RoHS Compliant

= Assembly Plant Code

= Date Code (Year & Week)

ORDERING AND MARKING INFORMATION

YWW

Packing

DFB25XXX

= Specific Device Code

Method

Part Number

DFB2505

Marking

DFB2505

DFB2510

DFB2520

DFB2540

DFB2560

DFB2580

DFB25100

Package

TS−6P 4L

(Pb−Free)

Rail

DFB2510

DFB2520

DFB2540

DFB2560

DFB2580

DFB25100

 Semiconductor Components Industries, LLC, 2009

Publication Order Number:

August, 2022 − Rev. 4

DFB2505/D

DFB2505, DFB2510, DFB2520, DFB2540, DFB2560, DFB2580, DFB25100

ABSOLUTE MAXIMUM RATINGS (T = 25C, Unless otherwise specified) (Note 1)

Value

DFB2505 DFB2510 DFB2520 DFB2540 DFB2560 DFB2580 DFB25100

Symbol

Parameter

Unit

RRM

Maximum Recurrent Peak

Reverse Voltage

100

200

400

600

800

1000

Maximum RMS Voltage

140

200

280

400

420

600

560

800

700

RMS

Maximum DC Blocking Voltage

100

1000

Maximum Average Forward

Rectified Current

(AV)

Peak Forward Surge Current

(8.3 ms Single Half−wave)

350

FSM

Typical Thermal Resistance

(Note 2)

4.75

C/W

Operating Temperature Range

Storage Temperature Range

−55 to +150

C

STG

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality

should not be assumed, damage may occur and reliability may be affected.

1. Single−phase, half−wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

2. Device mounted on 4 inch x 6 inch x 0.25 inch Al−plate heat sink.

ELECTRICAL CHARACTERISTICS (T = 25C unless otherwise noted)

Symbol

Parameter

Test Conditions

12.5 A

Value

1.0

Unit

Maximum Forward Voltage

Instantaneous Forward Voltage

25 A

1.1

Maximum DC Reverse Current

at Rated DC Blocking Voltage

T = 25C

T = 125C

500

508

110

I t

Rating for Fusing (t < 8.3 ms)

A s

Typical Junction Capacitance per Leg (Note 3)

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

3. Measured at 1 MHz and applied reverse bias of 4.0 V DC.

www.onsemi.com

DFB2505, DFB2510, DFB2520, DFB2540, DFB2560, DFB2580, DFB25100

TYPICAL PERFORMANCE CHARACTERISTICS

Figure 1. Maximum Derating Curve for Output Current

Figure 2. Maximum Forward Surge Current per Leg

Figure 3. Typical Reverse Characteristics per Leg

Figure 4. Typical Forward Characteristics per Leg

Figure 5. Typical Junction Capacitance

Figure 6. Forward Voltage Characteristics

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

SIP4 30x20

CASE 127EP

ISSUE O

DATE 31 DEC 2016

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON13720G

SIP4 30x20

PAGE 1 OF 1

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

www.onsemi.com

onsemi,

, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates

and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.

A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any

products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the

information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use

of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products

and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information

provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may

vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license

under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems

or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should

Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION

TECHNICAL PUBLICATIONS:

Technical Library: www.onsemi.com/design/resources/technical−documentation

onsemi Website: www.onsemi.com

ONLINE SUPPORT: www.onsemi.com/support

For additional information, please contact your local Sales Representative at

www.onsemi.com/support/sales



相关型号：