FDH300TR [ONSEMI]

高导通低漏二极管;


型号：	FDH300TR
厂家：	ONSEMI
描述：	高导通低漏二极管二极管
文件：	总5页 (文件大小：200K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

www.onsemi.com

High Conductance,

Low Leakage Diode

Cathode Band

FDH300 / FDH300A /

FDLL300A / FDH333 /

FDLL333

AXIAL LEAD

(DO−35)

CASE 017AG

MiniMELF / SOD−80

(LL−34)

CASE 100AD

(The placement of the

expansion gap has

no relationship to the

location of the cathode

terminal)

Cathode is denoted

with a black band

ABSOLUTE MAXIMUM RATINGS

(T = 25°C unless otherwise noted) (Note 1) (Note 2)

Symbol

Parameter

Working Inverse Voltage

Average Rectified Current

DC Forward Current

Value

125

Units

200

MARKING DIAGRAM

500

Recurrent Peak Forward Current

600

LL−34 COLOR BAND MARKING

Non−Repetitive Peak Forward Surge

Current

FSM

1ST BAND

WHITE

DEVICE

FDLL300A

Pulse Width = 1.0 s

Pulse Width = 1.0 ms

1.0

4.0

WHITE

Storage Temperature Range

−65 to +200

°C

STG

−1st band denotes cathode

terminal and has wider width

Operating Junction Temperature

175

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

1. These ratings are based on a maximum junction temperature of 175°C.

2. These are steady−state limits. onsemi should be consulted on applications

involving pulsed or low−duty−cycle operations.

ORDERING INFORMATION

See detailed ordering, marking and shipping information in the

package dimensions section on page 2 of this data sheet.

THERMAL CHARACTERISTICS

Symbol

Parameter

Total Device Dissipation

Value

500

Units

Derate Above 25°C

3.33

300

mW/°C

°C

Thermal Resistance, Junction to Ambient

Publication Order Number:

April, 2023 − Rev. 4

FDH300/D

FDH300 / FDH300A / FDLL300A / FDH333 / FDLL333

ELECTRICAL CHARACTERISTICS (Values are at T = 25°C unless otherwise noted.)

Symbol

Parameter

Condition

I = 100 μA

Min

150

−

Max

−

Unit

Breakdown Voltage

Forward Voltage FDH300 / FDH300A / FDLL300A

FDH300

I = 1.0 mA

680

750

760

800

880

890

920

1.0

I = 5.0 mA

−

FDH300A / FDLL300A

I = 5.0 mA

−

FDH300 / FDH300A / FDLL300A

FDH300

I = 10 mA

−

I = 50 mA

−

FDH300A / FDLL300A

I = 50 mA

−

FDH300 / FDH300A / FDLL300A

FDH333 / FDLL333

I = 100 mA

−

I = 200 mA

−

I = 50 mA

800

830

860

0.87

0.88

0.90

−

890

940

970

1.05

1.08

1.15

1.0

I = 100 mA

I = 150 mA

I = 200 mA

I = 250 mA

I = 300 mA

Reverse Current FDH300 / FDH300A / FDLL300A

FDH333 / FDLL333

= 125 V

μA

= 125 V, T = 150°C

−

3.0

= 125 V

−

3.0

= 125 V, T = 100°C

= 0, f = 1.0 MHz

−

500

6.0

Diode Capacitance

−

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

DEVICE ORDERING INFORMATION

†

Part Number

FDH300TR

FDH300A

Top Mark

H300

Package

Shipping

Tape and Reel

Bulk

DO−204AH (DO−35)

SOD−80 2L

H300A

H333

FDH300ATR

FDH333

Tape and Reel

Bulk

FDH333TR

FDLL300A

FDLL333

H333

Tape and Reel

WHITE

SOD−80 2L

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

AXIAL LEAD

CASE 017AG

ISSUE O

DATE 31 AUG 2016

T50 = 25.40 MIN (2X)

T26 = 14.00 MIN (2X)

4.56

3.05

0.533

0.460

NOTES: UNLESS OTHERWISE SPECIFIED

A) PACKAGE STANDARD REFERENCE:

JEDEC DO−204, VARIATION AH.

B) HERMETICALLY SEALED GLASS PACKAGE.

C) PACKAGE WEIGHT IS 0.137 GRAM.

D) ALL DIMENSIONS ARE IN MILLIMETERS.

1.91

1.53

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON13443G

AXIAL LEAD

PAGE 1 OF 1

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

MiniMELF / SOD−80

CASE 100AD

ISSUE O

DATE 30 APR 2012

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON79582E

MINIMELF / SOD−80

PAGE 1 OF 1

onsemi and

are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves

the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular

purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation

special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.

www.onsemi.com

onsemi,

, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates

and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.

A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any

products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the

information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use

of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products

and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information

provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may

vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license

under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems

or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should

Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION

TECHNICAL PUBLICATIONS:

Technical Library: www.onsemi.com/design/resources/technical−documentation

onsemi Website: www.onsemi.com

ONLINE SUPPORT: www.onsemi.com/support

For additional information, please contact your local Sales Representative at

www.onsemi.com/support/sales



相关型号：