FDLL400 [ONSEMI]

小信号二极管;


型号：	FDLL400
厂家：	ONSEMI
描述：	小信号二极管信号二极管
文件：	总5页 (文件大小：209K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

www.onsemi.com

High Voltage General

Purpose Diode

FDH400, FDLL400

AXIAL LEAD

(DO−35)

CASE 017AG

Features

• This is a Pb−Free and Halide Free Device

ABSOLUTE MAXIMUM RATINGS

(Values are at T = 25°C unless otherwise noted.) (Notes 1 and 2)

Symbol

Parameter

Working Inverse Voltage

Value

150

200

500

600

1.0

Unit

Average Rectified Forward Current

DC Forward Current

MiniMELF/SOD−80

CASE 100AD

Recurrent Peak Forward Current

Non−Repetitive Pulse Width = 1.0 s

FSM

Peak Forward

Current

Pulse Width = 1.0 ms

4.0

MARKING DIAGRAM

Storage Temperature Range

−65 to +200

°C

STG

Cathode Band (Black)

Operating Junction Temperature

175

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

1. These ratings are based on a maximum junction temperature of 200_C.

2. These are steady−state limits. onsemi should be consulted on applications

involving pulsed or low−duty−cycle operations.

(1st band denotes cathode terminal

and has wider width)

THERMAL CHARACTERISTICS

(Values are at T = 25°C unless otherwise noted.)

Max

ORDERING INFORMATION

FDH/FDLL400

Symbol

Parameter

Power Dissipation

Unit

†

500

3.33

300

Device

Package

Shipping

Derate above 25°C

mW/°C

°C/W

FDLL400

MiniMELF/SOD−80

2500 /

(Pb−Free/Halide Free) Tape & Reel

Thermal Resistance,

Junction to Ambient

FDH400

AXIAL LEAD

(Pb−Free / Halide

Free)

5000 /

Bulk

FDH400TR

AXIAL LEAD

(Pb−Free / Halide

Free)

10000 /

Tape & Reel

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

Publication Order Number:

May, 2023 − Rev. 2

FDLL400/D

FDH400, FDLL400

ELECTRICAL CHARACTERISTICS (Values are at T = 25°C unless otherwise noted.)

Symbol

Parameter

Breakdown Voltage

Test Conditions

Min

200

−

Max

−

Unit

I_R= 100 mA

Reverse Leakage

= 150 V

100

1.0

1.1

2.0

= 150 V, T = 150°C

−

Forward Voltage

I = 200 mA

−

I = 300 mA

−

Diode Capacitance

= 0, f = 1.0 MHz

−

Reverse Recovery Time

I = I = 30 mA , I = 3.0 mA, R = 100 W

−

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

AXIAL LEAD

CASE 017AG

ISSUE O

DATE 31 AUG 2016

T50 = 25.40 MIN (2X)

T26 = 14.00 MIN (2X)

4.56

3.05

0.533

0.460

NOTES: UNLESS OTHERWISE SPECIFIED

A) PACKAGE STANDARD REFERENCE:

JEDEC DO−204, VARIATION AH.

B) HERMETICALLY SEALED GLASS PACKAGE.

C) PACKAGE WEIGHT IS 0.137 GRAM.

D) ALL DIMENSIONS ARE IN MILLIMETERS.

1.91

1.53

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON13443G

AXIAL LEAD

PAGE 1 OF 1

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

MiniMELF / SOD−80

CASE 100AD

ISSUE O

DATE 30 APR 2012

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON79582E

MINIMELF / SOD−80

PAGE 1 OF 1

onsemi and

are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves

the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular

purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation

special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.

www.onsemi.com

onsemi,

, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates

and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.

A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any

products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the

information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use

of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products

and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information

provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may

vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license

under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems

or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should

Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION

TECHNICAL PUBLICATIONS:

Technical Library: www.onsemi.com/design/resources/technical−documentation

onsemi Website: www.onsemi.com

ONLINE SUPPORT: www.onsemi.com/support

For additional information, please contact your local Sales Representative at

www.onsemi.com/support/sales



相关型号：