FSA1157P6X [ONSEMI]
低 RON，低压 SPST 模拟开关;
| 型号： | FSA1157P6X |
| 厂家： | 
ONSEMI |
| 描述： | 低 RON，低压 SPST 模拟开关 开关 PC 光电二极管 |
| 文件： | 总11页 (文件大小：321K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Low-RON, Low-Voltage
SPST Analog Switch
SC−88 (SC−70 6 Lead), 1.25x2
FSA1156, FSA1157
CASE 419AD
Description
The FSA1156 and FSA1157 are high−performance Single−Pole /
Single−Throw (SPST) analog switches. The devices feature ultra−low
R
ON
of 0.75 W (typical) and operate over a wide V range of 1.65 V
CC
SIP6 1.45X1.0
CASE 127EB
to 5.5 V. The devices are fabricated with sub−micron CMOS
technology to achieve fast switching speeds. The select input is
TTL−level compatible. The FSA1156 has normally open operation;
the FSA1157 has normally closed operation.
MARKING DIAGRAM
Features
• Maximum 0.95 W R for 4.5 V Supply at 25°C
ON
xxx&K
&2&Z
• 0.3 W Maximum R Flatness at 4.5 V Supply
ON
• Broad V Operating Range: 1.65 V to 5.5 V
CC
• Fast Turn−On and Turn−Off Time
xxx = Specific Device Code (156, EH, or 157)
&K = 2−Digits Lot Run Traceability Code
&2 = 2−Digit Date Code
• Over−Voltage Tolerant, TTL−Compatible Control Input
• Available in Space−saving 6−lead, MicroPakt and SC70 Packages
• These Devices are Pb−Free and are RoHS Compliant
&Z = Assembly Plant Code
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2003
1
Publication Order Number:
January, 2022 − Rev. 3
FSA1157/D
FSA1156, FSA1157
ORDERING INFORMATION
†
Part Number
FSA1156P6X
Top Mark
156
Package
Shipping
SC−88 (SC−70 6 Lead), 1.25x2 (Pb−Free)
SIP6 1.45X1.0 (Pb−Free)
3000 / Tape & Reel
5000 / Tape & Reel
3000 / Tape & Reel
FSA1156L6X
EH
FSA1157P6X
157
SC−88 (SC−70 6 Lead), 1.25x2 (Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
PIN CONFIGURATIONS
Figure 1. FSA1156 SC70 Top View
(Normally Open)
Figure 2. FSA1156 MicroPak Top Through View
(Normally Open)
Figure 3. FSA1156 SC70 Top View
(Normally Open)
Figure 4. FSA1157 MicroPak Top Through View
(Normally Open)
PIN DEFINITIONS
Pin# SC70
Pin# Micropak
Name
A
Description
1
2
3
4
5
6
6
4
5
3
2
1
Data Ports
Ground
GND
B
Data Ports
Control Input
No Connect
Supply Voltage
S
NC
VCC
TRUTH TABLE
Control Input (S)
FSA1156
FSA1157
ON
Low
OFF
ON
High
OFF
www.onsemi.com
2
FSA1156, FSA1157
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Min
−0.5
−0.5
−0.5
Max
Unit
V
V
CC
Supply Voltage
6.0
V
Switch Voltage (Note 1)
Input Voltage (Note 1)
Input Diode Current
Switch Current
V
+ 0.5
V
SW
CC
V
6.0
−50
V
IN
I
mA
mA
mA
mW
°C
°C
°C
V
IK
I
200
SW
I
Peak Switch Current (Pulse at 1 ms Duration, < 10% Duty Cycle)
Power Dissipation at 85°C, SC70 Package
Storage Temperature Range
400
SWPEAK
P
D
180
T
STG
−65
+150
+150
+260
8000
T
J
Maximum Junction Temperature
T
L
Lead Temperature (Soldering, 10 seconds)
ESD
Electrostatic Discharge Capability
Human Body Model, JESD22−A114
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
1.65
0
Max
Unit
V
V
CC
Supply Voltage
5.50
V
Control Input Voltage (Note 2)
Switch Input Voltage
Operating Temperature
V
CC
V
CC
V
CNTRL
V
SW
0
V
T
A
−40
+85
350
°C
q
Thermal Resistance in Still Air, SC70 Package
°C/W
JA
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
2. Control input must be held HIGH or LOW and it must not float.
www.onsemi.com
3
FSA1156, FSA1157
DC ELECTRICAL CHARACTERISTICS (Typical values are at 25°C unless otherwise specified.)
Ambient Temperature (T )
A
+255C
−40 to +855C
Min.
Typ.
Max.
Min.
Max.
Symbol
Parameter
Conditions
V
CC
(V)
Units
V
Input Voltage High
2.7 to 3.6
4.5 to 5.5
2.7 to 3.6
4.5 to 5.5
2.7 to 3.6
4.5 to 5.5
2.0
V
IH
2.4
V
Input Voltage Low
V
0.6
0.8
1.0
1.0
IL
I
IN
V
= 0 V to V
mA
−1.0
−1.0
IN CC
Control Input Leakage
Off Leakage Current
I
I
,
A = 1 V, 4.5 V,
B = 4.5 V, 1 V
NO(OFF)
NC(OFF)
5.5
5.5
−2
−4
2
4
20
20
40
nA
nA
I
−40
A(ON)
A = 1 V, 4.5 V,
B = 1 V, 4.5 V, or Floating
On Leakage Current
R
Switch On Resistance
(Note 3)
W
W
ON
I
= 100 mA, B = 1.5 V
OUT
2.7
4.5
2.7
1.4
0.75
0.6
2.1
2.5
I
I
= 100 mA, B = 3.5 V
= 100 mA,
OUT
0.90
1.00
R
On Resistance
Flatness (Note 4)
FLAT(ON)
OUT
B = 0 V, 0.75 V, 1.5 V
0
I
= 100 mA,
OUT
0
4.5
0.1
0.2
0.3
B = 0 V, 1 V, 2 V
I
mA
3.6
5.5
0.1
0.1
0.5
0.5
1.0
1.0
CC
V
I
= 0 V or V
,
CC
Quiescent Supply
Current
IN
= 0 V
OUT
3. On resistance is determined by the voltage drop between the A an B pins at the indicated current through the switch.
4. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions.
AC ELECTRICAL CHARACTERISTICS (Typical values are at 25°C unless otherwise specified.)
Ambient Temperature (T )
A
+255C
−40 to +855C
Min.
Typ.
Max.
Min.
Max.
Symbol
Parameter
Conditions
B = 1.5 V, R = 50 W,
V
(V)
Units
Figure
CC
t
Turn−On Time
ns
Figure 7
ON
L
2.7 to 3.6
4.5 to 5.5
30
15
40
20
45
25
C = 35 pF
L
B = 3.0 V, R = 50 W,
L
C = 35 pF
L
t
ns
Figure 7
Figure 8
Turn−Off Time
OFF
B = 1.5 V, R = 50 W,
C = 35 pF
L
L
2.7 to 3.6
25
35
30
45
40
B = 3.0 V, R = 50 W,
L
4.5 to 5.5
2.7 to 3.6
22
10
C =35 pF
L
Q
pC
C = 1.0 nF, V = 0 V,
L
GE
Charge Injection
Off Isolation
R
= 0 W
GEN
4.5 to 5.5
2.7 to 3.6
4.5 to 5.5
2.7 to 3.6
4.5 to 5.5
20
OIRR
BW
dB
MHz
%
Figure 9
Figure 10
Figure 11
−65
−65
300
300
f = 1 MHz, R = 50 W
L
−3db Bandwidth
R = 50 W
L
THD
2.7 to 3.6
4.5 to 5.5
0.001
0.001
R = 600 W,
L
Total Harmon
Distortion
V
IN
= 0.5 V
,
PP
f = 20 Hz to 20 kHz
www.onsemi.com
4
FSA1156, FSA1157
CAPACITANCE
Symbol
Ambient Temperature +255C
Min.
Typ.
Max.
Parameter
Conditions
V
(V)
Units
pF
Figure
CC
C
Control Pin Input Capacitance f = 1 MHz
0.0
3
Figure 12
Figure 12
Figure 12
IN
C
B Port Off Capacitance
On Capacitance
f = 1 MHz
f = 1 MHz
4.5
4.5
20
65
pF
OFF
C
pF
ON
www.onsemi.com
5
FSA1156, FSA1157
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 5. On Resistance vs. Input Voltage, Over Supply Voltage, TA = 255C
Figure 6. On Resistance vs. Input Voltage, Over Temperature
www.onsemi.com
6
FSA1156, FSA1157
AC LOADINGS AND WAVEFORMS
Figure 7. Turn On / Off Timing
Figure 8. Charge Injection
Figure 9. Off Isolation
www.onsemi.com
7
FSA1156, FSA1157
AC LOADINGS AND WAVEFORMS (Continued)
Figure 10. Bandwidth
Figure 11. Harmonic Distortion
Figure 12. On / Off Capacitance
MicroPak is a trademark of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other
countries.
www.onsemi.com
8
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SIP6 1.45X1.0
CASE 127EB
ISSUE O
DATE 31 AUG 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13590G
SIP6 1.45X1.0
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−88 (SC−70 6 Lead), 1.25x2
CASE 419AD
ISSUE A
DATE 07 JUL 2010
1
SYMBOL
MIN
NOM
MAX
D
0.80
A
1.10
e
e
A1
A2
0.00
0.80
0.10
1.00
b
c
0.15
0.10
1.80
1.80
1.15
0.30
0.18
2.20
2.40
1.35
D
2.00
2.10
E1
E
E
E1
e
1.25
0.65 BSC
0.36
L
0.26
0.46
L1
L2
0.42 REF
0.15 BSC
TOP VIEW
0º
4º
8º
θ
10º
θ1
q1
A2
A1
A
q
L
b
L1
q1
c
L2
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-203.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON34266E
SC−88 (SC−70 6 LEAD), 1.25X2
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明