FSA8009UMX [ONSEMI]
带MIC/视频开关的自动插孔发送/结束检测;型号: | FSA8009UMX |
厂家: | ONSEMI |
描述: | 带MIC/视频开关的自动插孔发送/结束检测 开关 |
文件: | 总10页 (文件大小:976K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
2013年7月
FSA8009
带MIC/视频开关的自动插孔发送/结束检测
说明
特性
FSA8009是一款音频插孔麦克风/视频开关,用于具有发送/结
束(S/E)检测的3或4极附件。除了检测外,FSA8029还包含集成
式麦克风/视频开关,允许处理器配置音频插孔。该架构的设
计旨在允许常见的第三方耳机用于从手机、个人媒体播放器和
便携式外围设备听音乐。
附件插孔
3/4极音频插孔
检测
按下发送/结束键
开关类型
VDD
麦克风和视频
2.5 至 4.3 V
0.01%(典型值)
16 kV
. 确定何时按下发送/结束键
THD (MIC)
ESD (空气间隙)
工作温度
. 整合了用于4极的 MIC/视频 开关
. 降低了麦克风偏压造成的杂音
-40℃至85℃
10-Lead UMLP
1.4x1.8x0.5 mm,0.4 mm
间距
相关资源
封装
. 有关样品、疑问,请联系:
Analog.Switch@fairchildsemi.com.
顶标
KP
. FSA8009 演示板
订购信息
FSA8009UMX
应用
. 3.5 mm 和 2.5 mm 音频插孔
. 移动电话,智能电话
. MP3 和 PMP
典型应用
Baseband
Processor
VIO
GPIO
2.8V
VIO
VDD
10KΩ
R_VDD
TTL Level Input EN
Enable
GPIO1
GPIO2
GPIO3
Open Drain Output
S/E
L
R GND MIC
TTL Level Input
SEL
+
-
1
2 3 4
REF
Audio
CODEC
RMIC
MIC
VID
MIC Bias
J_MIC
MIC
L SPKR
R SPKR
CMIC
GND
Applications
Processor
Video Out
图1. 移动电话示例
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
引脚描述
名称 引脚号 类型
说明
R_VDD
EN
1
2
输出
输入
备选的上拉电压,带有分压电阻,设置 REF 引脚上的参考电压
0 器件无效(1)
1 器件有效(1)
0 VID = J_MIC(1)
1 MIC = J_MIC(1)
0 按(1 )
器件启用,低功率模式
SEL
S/E
3
4
输入
输出
MIC / VID 开关选择引脚
指示发送/结束键按下的状态,开漏输出需要上拉电阻
1 无键按下(1)
VID
VDD
6
5
开关
功率
开关
开关
输入
接地
视频开关路径;连接在视频源和音频插孔麦克风引脚之间
电源电压
MIC
7
麦克风开关路径,进入 CODEC 麦克风放大器输入
麦克风开关路径,连接至麦克风和 SEND/END 键和视频插孔
J_MIC
REF
8
10
9
通过分压电阻 R_VDD 或外部的参考电压,参考电压可用来检测发送/结束键的按下状态
音频插孔和 PCB 接地
GND
注意:
1. 0 = VOL 或 VIL;1 = VOH 或 VIH。
EN
R_VDD
2
1
SEL
S/E
REF
3
4
5
10
9
GND
J_MIC
VDD
8
6 7
VID MIC
图 2. UMLP引脚配置(透视图)
表1. 复位和有效状态下的器件配置
EN
0
SEL
X
MIC
3态
VID
3态
R_VDD
GND
S/E
高
1
1
J_MIC
打开
打开
J_MIC
VDD
有效
低
1
0
GND
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
2
绝对最大额定值
应力超过绝对最大额定值,可能会损坏设备。在超出推荐的工作条件的情况下,该器件可能无法正常运行或操作,且不建议让器
件在这些条件下长期工作。此外,过度暴露在高于推荐的工作条件下,会影响器件的可靠性。绝对最大额定值仅是额定应力值。
符号
VDD
参数
最小值
-0.5
最大值
5.5
单位
V
来自电池的电源电压
开关I/O电压
VSW
-0.5
VDD+0.5
V
IIK
输入箝位二极管电流(2)
开关输入/输出(连续)电流(2)
存储温度范围
-50
mA
mA
C
ISW
50
TSTG
TJ
-65
+150
+150
+260
最大结温
C
TL
引脚温度(焊接 ,10 秒)
C
空气式
16
10
6
IEC 61000-4-2 系统
接触式
全部其他引脚
ESD
kV
人体模型,JEDEC JESD22-A114
J_DET, J_MIC, VDD,
VIO, GND
8
2
充电器件模型, JEDEC JESD22-C101
全部引脚
注意:
2. 当测量输入与输出二极管电流额定值时,该输入与输出可能超出负额定值。
推荐工作条件
推荐的操作条件表定义了器件的真实工作条件。指定推荐的工作条件,以确保设备的最佳性能达到数据表中的规格。飞兆半导体
建议不要超过推荐工作条件,也不能按照绝对最大额定值进行设计。
符号
VDD
参数
最小值
2.5
最大值
4.3
单位
V
电池电源电压
工作温度
TA
-40
+85
ºC
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
3
直流电气特性
若无其他说明,所有典型值都在TA=25°C下测得。
MIC 开关
TA = -40 to +85°C
符号
参数
VDD (V)
工作条件
单位
最小值 典型值 最大值
2.8
3.0
3.3
3.8
2.8
3.0
3.3
3.8
2.0
1.5
1.2
1.0
0.7
0.6
0.5
0.5
4.0
3.5
3.0
2.5
1.5
1.4
1.3
1.2
Ω
RON
MIC 开关导通电阻
IOUT = 24 mA, VIN = 2.2 V
IOUT = 24 mA,
Ω
RFLAT(ON)
导通阻抗平面度
VIN = 1 V to VDD
2.5 至
VIN
开关输入电压范围
0
VDD
V
4.3
CON
MIC 和 J_MIC 开关导通电容
MIC 和 J_MIC 开关关断电容
2.8
2.8
f = 1 MHz
f = 1 MHz
15
8
pF
pF
COFF
视频开关特性
符号
TA = -40 to +85°C
参数
VDD (V)
工作条件
单位
最小值 典型值 最大值
2.8
3.0
3.3
3.8
2.8
3.0
3.3
3.8
1.0
0.9
0.8
0.7
0.4
0.3
0.2
0.15
1.5
1.4
Ω
RON
MIC 开关导通电阻
IOUT = 24 mA, VIN = 0.5 V
1.3
1.2
0.60
0.55
0.50
0.45
IOUT = 24 mA, VIN = 0 V to
1.2 V
Ω
RFLAT(ON)
导通阻抗平面度
2.5 至
4.3
VIN
开关输入电压范围
0
1.5
V
CON
VID 开关导通电容
VID 开关关断电容
2.8
2.8
f = 1 MHz
f = 1 MHz
40
10
pF
pF
COFF
并联I/O
TA = -40 to +85°C
最小值 典型值 最大值
符号
参数
单位
VIH
VIL
输入高电压(EN, SEL)
输入低电压(EN, SEL)
S/E 的上拉电阻
0.44 x VDD
VDD
V
V
GND
2
0.15 x VDD
110
PURS/E
VOL
KΩ
V
输出低电压 (S/E)(VPUR = 上拉电阻的电压)
0.2 x VPUR
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
4
直流电气特性(续)
若无其他说明,所有典型值都在TA=25°C下测得。
比较器 NC开关
TA = -40 至 +85°C
符号
参数
VDD (V)
工作条件
单位
最小值 典型值 最大值
VDD –
VREF
REF 引脚上的输入电压
比较器 "-" 端滞环
1
V
0.075
COMHYS
50
mV
电流
TA = -40 至 +85°C
单位
符号
参数
VDD (V)
4.3
工作条件
最小值 典型值 最大值
J_MIC = 1 V,4.3 V
MIC 或 VID = 4.3 V,1 V
nA
µA
nA
IOFF
IIN
关断漏电流
输入漏电流
低耗模式
-15
15
1
0 至 4.3 输入 0 至 4.3 V
2.5 至
ICC-EN
EN = 低电平
4.3
10
10
启用电流
2.5 至
4.3
nA
ICC-VID
视频模式期间的电流
(EN = 高电平,SEL =
低电平)
启用电流
(EN = 低电平,SEL =
高电平)
2.5 至
4.3
µA
ICC-MIC
麦克风模式期间的电流
20
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
5
交流电气特性
若无其他说明,所有典型值都在 VCC=3.3 V,TA = 25°C 下测得。
MIC 开关
TA = -40 至 +85°C
符号
参数
VDD (V)
2.8
工作条件
单位
最小值 典型值 最大值
RT = 600 Ω,VSW = 0.5 VPP,
f = 20 Hz 至 20 kHz,VIN =
2.2 V
THD
总谐波失真度
.003
%
f = 20 kHz, RS=32 Ω, CL=0 pF,
RT=32 Ω
OIRR
关断隔离
2.8
2.8
-100
-67
dB
dB
XTALK
MIC 至 VID 的串扰
f = 100 MHz, RL=100 Ω
视频开关特性
符号
TA = -40 至 +85°C
参数
VDD (V)
工作条件
单位
最小值 典型值 最大值
DG
DP
差分增益
2.8
2.8
2.8
RL = 150 Ω, f = 3.58 MHz
RL = 150 Ω, f = 3.58 MHz
f=10 MHz, RL=150 Ω,
.09
.13
-45
%
◦
差分相位
关断隔离
OIRR
dB
f=10 MHz, RIN = 10 Ω, CL=0 pF,
RL=150 Ω
XTALK
VID 至 MIC 的串扰
2.8
-65
dB
并联I/O
TA = -40 至 +85°C
符号
参数
VDD (V)
工作条件
单位
最小值 典型值 最大值
2.5 至
tBBM
"先开后合"时间
启用和禁用时间
选择比较器导通
选择比较器关断
开关导通时间
120
15
10
20
40
15
10
Ns
µs
µs
ns
ns
ns
µs
4.3
2.5 至
tEN
EN 低高或 EN 高低
SEL 低高至比较器导通
SEL 高低至比较器关断
4.3
2.5 至
4.3
tSEL-COM-ON
tSEL-COM-OFF
tON
2.5 至
4.3
2.5 至
4.3
2.5 至
4.3
tOFF
开关关断时间
比较器触发至 S/E
输出的传输延迟
2.5 至 J_MIC > REF,低高
tJ_MIC-S/E
4.3
J_MIC < REF,高低
功率
符号
TA = -40 至 +85°C
单位
参数
VDD (V)
2.8
工作条件
最小值 典型值 最大值
电源噪声 300 mVPP,测得
10/90%,f=217 Hz
dB
PSRR
电源抑制比
-100
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
6
物理尺寸测试
0.10 C
1.40
A
B
2X
(9X)
0.563
1.70
0.663
1.80
1
PIN#1 IDENT
2.10
0.10 C
0.40
TOP VIEW
2X
0.225
(10X)
RECOMMENDED
LAND PATTERN
0.55 MAX.
(0.15)
0.10 C
0.08 C
9X
0.45
1.45
SEATING
PLANE
0.55
0.40
C
0.05
0.00
SIDE VIEW
1.85
0.35
(9X)
0.45
0.225
(10X)
3
OPTIONAL MINIMIAL
TOE LAND PATTERN
0.40
6
DETAIL A
1
NOTES:
PIN#1 IDENT
A. PACKAGE DOES NOT CONFORM TO
ANY JEDEC STANDARD.
B. DIMENSIONS ARE IN MILLIMETERS.
0.15
0.25
10
(10X)
0.10 C A B
0.05 C
BOTTOM VIEW
C. DIMENSIONS AND TOLERANCES PER
ASME Y14.5M, 1994.
D. LAND PATTERN RECOMMENDATION IS
BASED ON FSC DESIGN ONLY.
0.55
0.45
E. DRAWING FILENAME: MKT-UMLP10Arev5.
F. FAIRCHILD SEMICONDUCTOR.
PACKAGE
EDGE
45°
LEAD
OPTION 2
LEAD
OPTION 1
0.25
0.15
DETAIL A
SCALE : 2X
SCALE : 2X
SCALE : 2X
图 3. 10-引脚,UMLP 封装图
封装图纸是作为一项服务而提供给考虑选用飞兆半导体产品的客户。具体参数可进行改动,且无需做出相应通知。请注意图纸上的版本和/或日
期,并联系飞兆半导体代表核实或获得最新版本。封装规格并不超出飞兆公司全球范围内的条款与条件,尤其指保修,保修涉及飞兆半导体的全部
产品。
随时访问飞兆半导体在线封装网页,可以获得最新的封装图:
http://www.fairchildsemi.com/packaging/.
订购信息
器件编号
工作温度范围
顶标
封装
10 引脚 1.4 x 1.8 x 0.55 mm,0.4 mm
间距,薄模塑无铅封装 (UMLP)
FSA8009UMX
-40 至 +85°C
KP
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
7
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSA8009 • Rev. 1.0.2
8
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
FSA800UMX
USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability
FAIRCHILD
FSA800_09
USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability
FAIRCHILD
FSA801
USB2.0 High-Speed (480 Mbps), UART, and Audio Switch with Negative Signal Capability
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明