KSA992FATA [ONSEMI]

PNP外延硅晶体管;


型号：	KSA992FATA
厂家：	ONSEMI
描述：	PNP外延硅晶体管晶体管
文件：	总7页 (文件大小：299K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PNP Epitaxial Silicon

Transistor

KSA992

Features

• Audio Frequency Low−Noise Amplifier

• Complement to KSC1845

• These are Pb−Free Devices

www.onsemi.com

MAXIMUM RATINGS (Values are at T = 25°C unless otherwise noted.)

Symbol

Parameter

Collector−Base Voltage

Collector−Emitter Voltage

Emitter−Base Voltage

Collector Current

Value

−120

−5

Unit

CBO

1. Emitter

2. Collector

3. Base

CEO

EBO

−50

°C

TO−92 3 4.825x4.76 TO−92 3 4.83x4.76

CASE 135AN

LEADFORMED

CASE 135AR

Base Current

−10

Junction Temperature

Storage Temperature

150

STG

−55 to 150

MARKING DIAGRAM

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

AA9

92X

AA9

92X

YWW

THERMAL CHARACTERISTICS (Values are at T = 25°C unless otherwise

noted.) (Note 1)

Symbol

Parameter

Power Dissipation

Value

500

Unit

Derate Above 25°C

mW/°C

°C/W

Thermal Resistance,

Junction−to−Ambient

250

1. PCB size: FR−4, 76 mm x 114 mm x 1.57 mm (3.0 inch x 4.5 inch x 0.062 inch)

= Assembly Code

with minimum land pattern size.

A992 = Device Code

= F / FA / FB

YWW = Date Code

ORDERING INFORMATION

See detailed ordering and shipping information on page 4 of

this data sheet.

Publication Order Number:

April, 2021 − Rev. 3

KSA992/D

KSA992

ELECTRICAL CHARACTERISTICS (Values are at T = 25°C unless otherwise noted.)

Symbol

Parameter

Collector Cut−Off Current

Emitter Cut−Off Current

DC Current Gain

Conditions

= −120 V, I = 0

Min

−

Typ

−

Max

−50

−1

Unit

CBO

CEO

= −100 V, I = 0

−

= −5 V, I = 0

−

−50

−

EBO

= −6 V, I = −0.1 mA

150

200

−0.55

−

500

−0.61

−0.09

100

FE1

FE2

= −6 V, I = −1 mA

800

−0.65

−0.30

−

(on)

Base−Emitter On Voltage

Collector−Emitter Saturation Voltage

Current Gain Bandwidth Product

Output Capacitance

= −6 V, I = −1 mA

(sat)

I = −10 mA, I = −1 mA

C B

= −6 V, I = −1 mA

−

MHz

= −30 V, I = 0, f = 1 MHz

Noise Figure

= −5 V, I = −1.0 mA,

−

= 100 kW, f = 1 kHz

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

h_FECLASSIFICATION

Classification

200~400

300~600

300~470

430~600

400~800

FE2

www.onsemi.com

KSA992

TYPICAL PERFORMANCE CHARACTERISTICS

−1.0

−0.8

−0.6

−0.4

−0.2

0.0

−10

= −24 mA

= −1.2 mA

= −20 mA

= −16 mA

= −1.2 mA

−8

−6

−4

−2

= −1.0 mA

= −0.8 mA

= −0.6 mA

= −0.4 mA

= −12 mA

= −8 mA

= −4 mA

= −0.2 mA

= 0

−20

−40

−60

−80

−100

−1

−2

−3

−4

−5

, COLLECTOR−EMITTER VOLTAGE (V)

Figure 1. Static Characteristic

Figure 2. Static Characteristic

1000

800

600

400

200

−10

−1

= −6 V

I = 10 − I

C B

(sat)

−0.1

−0.01

−0.1

−1

−10

−100

−0.1

−1

−10

−100

I , COLLECTOR CURRENT (mA)

Figure 3. DC Current Gain

Figure 4. Base−Emitter Saturation Voltage and

Collector−Emitter Saturation Voltage

1000

= 0

= −6 V

f = 1 MHz

100

0.1

−1

−10

−100

−1000

100

, COLLECTOR−BASE VOLTAGE (V)

I , COLLECTOR CURRENT (mA)

Figure 5. Collector Output Capacitance

Figure 6. Current Gain Bandwidth Product

www.onsemi.com

KSA992

TYPICAL PERFORMANCE CHARACTERISTICS (Continued)

800

700

600

500

400

300

200

100

125

150

175

Ta, AMBIENT TEMPERATURE (°C)

Figure 7. Power Derating

ORDERING INFORMATION

Part Number

†

Top Mark

Package

Shipping

KSA992FBU

A992

TO−92 3L

(Pb−Free)

10000 Units / Bulk

2000 / Tape & Ammo

KSA992FTA

KSA992FATA

KSA992FBTA

TO−92 3L

(Pb−Free)

TO−92 3L

(Pb−Free)

TO−92 3L

(Pb−Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

TO−92 3 4.825x4.76

CASE 135AN

ISSUE O

DATE 31 JUL 2016

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON13880G

TO−92 3 4.825X4.76

PAGE 1 OF 1

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

www.onsemi.com

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

TO−92 3 4.83x4.76 LEADFORMED

CASE 135AR

ISSUE O

DATE 30 SEP 2016

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DOCUMENT NUMBER:

DESCRIPTION:

98AON13879G

TO−92 3 4.83X4.76 LEADFORMED

PAGE 1 OF 1

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

www.onsemi.com

onsemi,

, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates

and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.

A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any

products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the

information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use

of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products

and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information

provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may

vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license

under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems

or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should

Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION

TECHNICAL PUBLICATIONS:

Technical Library: www.onsemi.com/design/resources/technical−documentation

onsemi Website: www.onsemi.com

ONLINE SUPPORT: www.onsemi.com/support

For additional information, please contact your local Sales Representative at

www.onsemi.com/support/sales



相关型号：