MC10EL05 [ONSEMI]

2-Input Differential AND/NAND; 2 ，输入差分与/非


型号：	MC10EL05
厂家：	ONSEMI
描述：	2-Input Differential AND/NAND 2 ，输入差分与/非
文件：	总3页 (文件大小：82K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SEMICONDUCTOR TECHNICAL DATA

The MC10EL/100EL05 is a 2-input differential AND/NAND gate. The

device is functionally equivalent to the E404 device with higher

performance capabilities. With propagation delays and output transition

times significantly faster than the E404 the EL05 is ideally suited for those

applications which require the ultimate in AC performance.

Because a negative 2-input NAND is equivalent to a 2-input OR

function, the differential inputs and outputs of the device allows the EL05

to also be used as a 2-input differential OR/NOR gate.

The differential inputs employ clamp circuitry so that under open input

conditions (pulled down to V ) the input to the AND gate will be HIGH. In

this way, if one set of inputs is open, the gate will remain active to the

other input.

• 275ps Propagation Delay

D SUFFIX

PLASTIC SOIC PACKAGE

CASE 751-05

• High Bandwidth Output Transitions

• 75kΩ Internal Input Pulldown Resistors

• >1000V ESD Protection

LOGIC DIAGRAM AND PINOUT ASSIGNMENT

8 V

7 Q

6 Q

PIN DESCRIPTION

FUNCTION

D0, D1

Data Inputs

Data Outputs

5 V

12/93

Motorola, Inc. 1996

REV 2

3–1

MC10EL05 MC100EL05

DC CHARACTERISTICS (V

= V (min) to V (max); V = GND)

–40°C

0°C

25°C

85°C

Symbol

Characteristic

Power Supply Current

Min

Typ

Max

Min

Typ

Max

Min

Typ

Max

Min

Typ

Max

Unit

10EL

100EL

Power Supply Voltage

10EL

100EL

–5.2

–4.5

–5.5

–4.75 –5.2

–4.20 –4.5

–5.5 –4.75 –5.2

–5.5 –4.20 –4.5

–5.5 –4.75 –5.2

–5.5 –4.20 –4.5

–5.5 –4.75

–5.5 –4.20

Input HIGH Current

150

µA

AC CHARACTERISTICS (V

= V (min) to V (max); V

EE EE

= GND)

–40°C

0°C

25°C

85°C

Symbol

Characteristic

Min

Typ

Max

440

Min

Typ

Max

Min

Typ

Max

Min

Typ

Max Unit

Propagation Delay to

Output

PLH

PHL

135

150

–0.4

260

185

150

–0.4

275

390

185

150

–0.4

275

390

215

150

–0.4

305

420

Minimum Input Swing

See

Common Mode Range

CMR

Output Rise/Fall Times Q

(20% – 80%)

100

225

350

100

225

350

100

225

350

100

225

350

1. Minimum input swing for which AC parameters are guaranteed. The device has a DC gain of ≈40.

2. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within

the specified range and the peak-to-peak voltage lies between V min and 1V. The lower end of the CMR range is dependent on V and is

PP EE

equal to V

+ 3.0V.

MOTOROLA

3–2

ECLinPS and ECLinPS Lite

DL140 — Rev 3

MC10EL05 MC100EL05

OUTLINE DIMENSIONS

D SUFFIX

PLASTIC SOIC PACKAGE

CASE 751–05

ISSUE P

NOTES:

–A–

1. DIMENSIONS A AND B ARE DATUMS AND T IS A

DATUM SURFACE.

2. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

3. DIMENSIONS ARE IN MILLIMETER.

4. DIMENSION A AND B DO NOT INCLUDE MOLD

PROTRUSION.

5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.

6. DIMENSION D DOES NOT INCLUDE MOLD

PROTRUSION. ALLOWABLE DAMBAR

PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS

OF THE D DIMENSION AT MAXIMUM MATERIAL

CONDITION.

–B–

MILLIMETERS

DIM

MIN

4.80

3.80

1.35

0.35

0.40

MAX

5.00

4.00

1.75

0.49

1.25

–T–

SEATING

PLANE

1.27 BSC

8X D

0.18

0.10

0.25

0.25 (0.010)

5.80

0.25

6.20

0.50

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and

specificallydisclaims any and all liability, includingwithoutlimitationconsequentialorincidentaldamages. “Typical” parameters which may be provided in Motorola

datasheetsand/orspecificationscananddovaryindifferentapplicationsandactualperformancemayvaryovertime. Alloperatingparameters,including“Typicals”

must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of

others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applicationsintended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury

ordeathmayoccur. ShouldBuyerpurchaseoruseMotorolaproductsforanysuchunintendedorunauthorizedapplication,BuyershallindemnifyandholdMotorola

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that

Motorola was negligent regarding the design or manufacture of the part. Motorola and

Opportunity/Affirmative Action Employer.

are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal

How to reach us:

USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;

JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,

P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454

3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315

MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609

INTERNET: http://Design–NET.com

ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

MC10EL05/D

◊

ECLinPS and ECLinPS Lite

DL140 — Rev 3

3–3

MOTOROLA

相关型号：