MM74HCT04MX [ONSEMI]
六路逆变器;
| 型号： | MM74HCT04MX |
| 厂家： | 
ONSEMI |
| 描述： | 六路逆变器 光电二极管 逻辑集成电路 |
| 文件： | 总9页 (文件大小：339K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Hex Inverter
MM74HCT04
14
SOIC−14
1
CASE 751A−03
General Description
14
The MM74HCT04 is a logic function fabricated by using advanced
silicon−gate CMOS technology which provides the inherent benefits
of CMOS—low quiescent power and wide power supply range.
This device is input and output characteristic as well as pin−out
compatible with standard 74LS logic families. The MM74HCT04,
triple buffered, hex inverters, features low power dissipation and fast
switching times. All inputs are protected from static discharge by
1
SOIC−14
CASE 751EF
internal diodes to V and ground.
CC
14
MM74HCT devices are intended to interface between TTL and
NMOS components and standard CMOS devices. These parts are also
plug−in replacements for LS−TTL devices and can be used to reduce
power consumption in existing designs.
1
TSSOP−14
CASE 948G−01
Features
• TTL, LS Pin−out and Threshold Compatible
MARKING DIAGRAM
• Fast Switching: t , t
= 10 ns (typ.)
PLH PHL
14
• Low Power: 10 mW at DC, 3.7 mW at 5 MHz
• High Fan Out: ≥10 LS Loads
HCT04A
AWLYWW
• Inverting, Triple Buffered
• These Devices are Pb−Free, Halide Free and are RoHS Compliant
1
SOIC−14
Connection Diagram
14
HCT
04A
ALYW
1
TSSOP−14
HCT04A= Specific Device Code
A
= Assembly Location
WL, L = Wafer Lot
= Year
Y
WW, W = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information on page 727
of this data sheet.
Top View
Figure 1. Pin Assignments for SOIC and TSSOP
© Semiconductor Components Industries, LLC, 1984
1
Publication Order Number:
November, 2022 − Rev. 2
MM74HCT04/D
MM74HCT04
ABSOLUTE MAXIMUM RATINGS (Note 1)
Symbol
Parameter
Rating
V
CC
Supply Voltage
–0.5 to +7.0 V
V
IN
DC Input Voltage
–0.5 to V + 0.5 V
CC
V
DC Output Voltage
Clamp Diode Current
DC Output Current, per Pin
–0.5 to V + 0.5 V
OUT
CC
I , I
IK OK
20 mA
25 mA
I
OUT
I
DC V or GND Current, per Pin
50 mA
CC
CC
T
Storage Temperature Range
–65°C to +150°C
500 mW
STG
P
Power Dissipation
S.O. Package Only
D
T
L
Lead Temperature (Soldering 10 Seconds)
260°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Unless otherwise specified all voltages are referenced to ground.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
4.5
0
Max
Unit
V
V
CC
Supply Voltage
5.5
V , V
IN OUT
DC Input or Output Voltage
Operating Temperature Range
Input Rise or Fall Times
V
CC
V
T
A
–55
−
+125
500
°C
ns
t , t
r
f
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
2
MM74HCT04
DC ELECTRICAL CHARACTERISTICS (V = 5 V 10% (unless otherwise specified))
CC
T
= −40°C
T = −55°C
A
to 125°C
A
to 85°C
T
A
= 25°C
Typ.
Guaranteed Limits
Symbol
Parameter
Conditions
Unit
V
Minimum HIGH Level
Input Voltage
−
2.0
0.8
2.0
2.0
0.8
V
IH
V
Maximum LOW Level
Input Voltage
−
0.8
V
V
IL
V
OH
Minimum HIGH Level
Output Voltage
V
= V or V ,
OUT
V
CC
V
− 0.1
V
− 0.1
V
− 0.1
IN
IH
IL
CC
CC
CC
⎮I
⎪ = 20 mA
V
= V or V ,
OUT
= 4.5 V
4.2
5.2
3.98
4.98
3.84
3.7
IN
IH
IL
⎮I
⎪ = 4.0 mA,
V
CC
V
= V or V ,
4.84
4.7
IN
IH
IL
⎮I
⎪ = 4.8 mA,
OUT
V
CC
= 5.5 V
V
OL
Maximum LOW Level
Voltage
V
= V
IH
OUT
0
0.1
0.1
0.1
0.4
V
IN
⎮I
⎪ = 20 mA
V
= V
0.2
0.26
0.33
IN
IH
⎮I
⎪ = 4.0 mA
OUT
V
= 4.5 V
CC
V
= V
OUT
= 5.5 V
0.2
0.26
0.33
0.4
IN
IH
⎮I
⎪ = 4.8 mA
V
CC
I
Maximum Input Current
V
V
= V or GND,
−
−
−
0.1
2.0
0.3
1.0
20
1.0
40
mA
mA
IN
IN
IH
CC
or V
IL
I
Maximum Quiescent
Supply Current
V
OUT
= V or GND,
CC
= 0 mA
CC
IN
I
V
IN
= 2.4 V or 0.5 V
0.4
0.5
mA
(Note 2)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. This is measured per input with all other inputs held at V or ground.
CC
www.onsemi.com
3
MM74HCT04
AC ELECTRICAL CHARACTERISTICS
(V = 5.0 V, t = t = 6 ns, C = 15 pF, T = 25°C (unless otherwise specified))
CC
r
f
L
A
Symbol
Parameter
Conditions
Typ.
Guaranteed Limit
Unit
t
, t
Maximum Propagation Delay
10
18
ns
PLH PHL
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
AC ELECTRICAL CHARACTERISTICS
(V = 5.0 V 10%, t = t = 6 ns, C = 50 pF (unless otherwise specified))
CC
r
f
L
T
A
= 25°C
T
= −40°C
T = −55°C
A
to 125°C
A
to 85°C
Typ.
14
8
Guaranteed Limits
Symbol
Parameter
Conditions
Unit
ns
t
, t
Maximum Propagation Delay
20
15
25
19
30
22
PLH PHL
t
, t
Maximum Output Rise
and Fall Time
ns
THL TLH
C
Power Dissipation Capacitance (Note 3)
20
5
−
−
−
pF
pF
PD
C
Input Capacitance
10
10
10
IN
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2
3. C determines the no load dynamic power consumption, P = C
V
f + I V , and the no load dynamic current consumption,
PD
D
PD CC
CC CC
I
= C
V
f + I
.
S
PD CC
CC
ORDERING INFORMATION
Device
†
Package
Shipping
MM74HCT04M
SOIC−14, Case 751A−03
(Pb−Free and Halide Free)
55 Units / Tube
MM74HCT04MX
SOIC−14, Case 751EF
2500 Units / Tape & Reel
2500 Units / Tape & Reel
(Pb−Free and Halide Free)
MM74HCT04MTCX
TSSOP−14, Case 948G−01
(Pb−Free and Halide Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
NOTE: All packages are lead free per JEDEC: J−STD−020B standard.
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOIC−14 NB
CASE 751A−03
ISSUE L
14
1
DATE 03 FEB 2016
SCALE 1:1
NOTES:
D
A
B
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION
SHALL BE 0.13 TOTAL IN EXCESS OF AT
MAXIMUM MATERIAL CONDITION.
4. DIMENSIONS D AND E DO NOT INCLUDE
MOLD PROTRUSIONS.
14
8
7
A3
E
H
5. MAXIMUM MOLD PROTRUSION 0.15 PER
SIDE.
L
DETAIL A
1
MILLIMETERS
DIM MIN MAX
INCHES
MIN MAX
13X b
M
M
B
0.25
A
A1
A3
b
D
E
1.35
0.10
0.19
0.35
8.55
3.80
1.75 0.054 0.068
0.25 0.004 0.010
0.25 0.008 0.010
0.49 0.014 0.019
8.75 0.337 0.344
4.00 0.150 0.157
M
S
S
B
0.25
C A
DETAIL A
h
A
X 45
_
e
H
h
L
1.27 BSC
0.050 BSC
6.20 0.228 0.244
0.50 0.010 0.019
1.25 0.016 0.049
5.80
0.25
0.40
0
0.10
M
A1
e
M
7
0
7
_
_
_
_
SEATING
PLANE
C
GENERIC
MARKING DIAGRAM*
SOLDERING FOOTPRINT*
6.50
14
14X
1.18
XXXXXXXXXG
AWLYWW
1
1
XXXXX = Specific Device Code
A
WL
Y
= Assembly Location
= Wafer Lot
= Year
1.27
PITCH
WW
G
= Work Week
= Pb−Free Package
14X
0.58
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
STYLES ON PAGE 2
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42565B
SOIC−14 NB
PAGE 1 OF 2
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
SOIC−14
CASE 751A−03
ISSUE L
DATE 03 FEB 2016
STYLE 1:
STYLE 2:
CANCELLED
STYLE 3:
STYLE 4:
PIN 1. NO CONNECTION
2. CATHODE
PIN 1. COMMON CATHODE
2. ANODE/CATHODE
3. ANODE/CATHODE
4. NO CONNECTION
5. ANODE/CATHODE
6. NO CONNECTION
7. ANODE/CATHODE
8. ANODE/CATHODE
9. ANODE/CATHODE
10. NO CONNECTION
11. ANODE/CATHODE
12. ANODE/CATHODE
13. NO CONNECTION
14. COMMON ANODE
PIN 1. NO CONNECTION
2. ANODE
3. ANODE
4. NO CONNECTION
5. ANODE
6. NO CONNECTION
7. ANODE
8. ANODE
9. ANODE
10. NO CONNECTION
11. ANODE
12. ANODE
13. NO CONNECTION
14. COMMON CATHODE
3. CATHODE
4. NO CONNECTION
5. CATHODE
6. NO CONNECTION
7. CATHODE
8. CATHODE
9. CATHODE
10. NO CONNECTION
11. CATHODE
12. CATHODE
13. NO CONNECTION
14. COMMON ANODE
STYLE 5:
STYLE 6:
STYLE 7:
STYLE 8:
PIN 1. COMMON CATHODE
2. ANODE/CATHODE
3. ANODE/CATHODE
4. ANODE/CATHODE
5. ANODE/CATHODE
6. NO CONNECTION
7. COMMON ANODE
8. COMMON CATHODE
9. ANODE/CATHODE
10. ANODE/CATHODE
11. ANODE/CATHODE
12. ANODE/CATHODE
13. NO CONNECTION
14. COMMON ANODE
PIN 1. CATHODE
2. CATHODE
3. CATHODE
4. CATHODE
5. CATHODE
6. CATHODE
7. CATHODE
8. ANODE
PIN 1. ANODE/CATHODE
2. COMMON ANODE
3. COMMON CATHODE
4. ANODE/CATHODE
5. ANODE/CATHODE
6. ANODE/CATHODE
7. ANODE/CATHODE
8. ANODE/CATHODE
9. ANODE/CATHODE
10. ANODE/CATHODE
11. COMMON CATHODE
12. COMMON ANODE
13. ANODE/CATHODE
14. ANODE/CATHODE
PIN 1. COMMON CATHODE
2. ANODE/CATHODE
3. ANODE/CATHODE
4. NO CONNECTION
5. ANODE/CATHODE
6. ANODE/CATHODE
7. COMMON ANODE
8. COMMON ANODE
9. ANODE/CATHODE
10. ANODE/CATHODE
11. NO CONNECTION
12. ANODE/CATHODE
13. ANODE/CATHODE
14. COMMON CATHODE
9. ANODE
10. ANODE
11. ANODE
12. ANODE
13. ANODE
14. ANODE
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42565B
SOIC−14 NB
PAGE 2 OF 2
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOIC14
CASE 751EF
ISSUE O
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13739G
SOIC14
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSSOP−14 WB
CASE 948G
ISSUE C
14
DATE 17 FEB 2016
1
SCALE 2:1
NOTES:
14X K REF
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
M
S
S
V
0.10 (0.004)
T U
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL
NOT EXCEED 0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL
IN EXCESS OF THE K DIMENSION AT
MAXIMUM MATERIAL CONDITION.
S
0.15 (0.006) T U
N
0.25 (0.010)
14
8
2X L/2
M
B
L
N
−U−
PIN 1
IDENT.
F
7
1
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
DETAIL E
7. DIMENSION A AND B ARE TO BE
DETERMINED AT DATUM PLANE −W−.
S
K
0.15 (0.006) T U
A
−V−
MILLIMETERS
DIM MIN MAX
INCHES
MIN MAX
K1
A
B
C
D
F
G
H
J
4.90
4.30
−−−
0.05
0.50
5.10 0.193 0.200
4.50 0.169 0.177
J J1
1.20
−−− 0.047
0.15 0.002 0.006
0.75 0.020 0.030
SECTION N−N
0.65 BSC
0.026 BSC
0.60 0.020 0.024
0.20 0.004 0.008
0.16 0.004 0.006
0.30 0.007 0.012
0.25 0.007 0.010
0.50
0.09
0.09
0.19
J1
K
−W−
C
K1 0.19
L
M
6.40 BSC
0.252 BSC
0.10 (0.004)
0
8
0
8
_
_
_
_
SEATING
PLANE
−T−
H
G
DETAIL E
D
GENERIC
MARKING DIAGRAM*
14
SOLDERING FOOTPRINT
XXXX
XXXX
ALYWG
G
7.06
1
1
A
L
= Assembly Location
= Wafer Lot
Y
W
G
= Year
= Work Week
= Pb−Free Package
0.65
PITCH
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
01.34X6
14X
1.26
DIMENSIONS: MILLIMETERS
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASH70246A
TSSOP−14 WB
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明