MUR210RLG [ONSEMI]

SWITCHMODE TM Power Rectifier; SWITCHMODE TM电力整流器


型号：	MUR210RLG
厂家：	ONSEMI
描述：	SWITCHMODE TM Power Rectifier SWITCHMODE TM电力整流器
文件：	总5页 (文件大小：55K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MUR210

Preferred Device

SWITCHMODEt

Power Rectifier

SWITCHMODE power rectifiers are state−of−the−art devices that

are designed for use in switching power supplies, inverters and as free

wheeling diodes.

http://onsemi.com

Features

ULTRAFAST RECTIFIERS

2 AMPERES, 100 VOLTS

• Ultrafast 20 Nanosecond Recovery Times

• 175°C Operating Junction Temperature

• Low Forward Voltage

• Low Leakage Current

• High Temperature Glass Passivated Junction

• These are Pb−Free Devices*

Mechanical Characteristics

• Case: Epoxy, Molded

• Weight: 0.4 Gram (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

DO−41

PLASTIC

AXIAL LEAD

CASE 59

• Lead and Mounting Surface Temperature for Soldering Purposes:

220°C Max for 10 Seconds, 1/16″ from Case

• Polarity: Cathode Indicated by Polarity Band

MAXIMUM RATINGS

MARKING DIAGRAM

Rating

Symbol

Value

Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

100

−

RRM

RWM

MUR210

YYWW G

Average Rectified Forward Current

(Square Wave Mounting Method #3)

(Note 1)

2.0 @

T = 100°C

F(AV)

= Assembly Location

= Year

WW = Work Week

Non-Repetitive Peak Surge Current

(Surge applied at rated load conditions

halfwave, single phase, 60 Hz)

FSM

= Pb−Free Package

(Note: Microdot may be in either location)

Operating Junction Temperature and

Storage Temperature Range

T , T

−65 to +175

°C

stg

ORDERING INFORMATION

THERMAL CHARACTERISTICS

Characteristic

†

Device

MUR210

Package

Shipping

Symbol

Value

Unit

Axial Lead*

1000 Units/Bag

Maximum Thermal Resistance,

Junction−to−Ambient

See Note 3 °C/W

MUR210G

Axial Lead*

1000 Units/Bag

5000/Tape & Reel

Maximum ratings are those values beyond which device damage can occur.

Maximum ratings applied to the device are individual stress limit values (not

normal operating conditions) and are not valid simultaneously. If these limits are

exceeded, device functional operation is not implied, damage may occur and

reliability may be affected.

MUR210RL

MUR210RLG

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specifications

Brochure, BRD8011/D.

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

*This package is inherently Pb−Free.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

Preferred devices are recommended choices for future use

and best overall value.

Publication Order Number:

February, 2006 − Rev. 1

MUR210/D

MUR210

ELECTRICAL CHARACTERISTICS

Characteristic

Symbol

Value

Unit

Maximum Instantaneous Forward Voltage (Note 2)

(I = 2.0 A, T = 150°C)

0.74

0.94

(I = 2.0 A, T = 25°C)

Maximum Instantaneous Reverse Current (Note 2)

(Rated DC Voltage, T = 150°C)

2.0

(Rated DC Voltage, T = 25°C)

Maximum Reverse Recovery Time

(I = 1.0 A, di/dt = 50 A/ms)

(I = 0.5 A, I = 1.0 A, I = 0.25 A)

REC

Maximum Forward Recovery Time

(I = 1.0 A, di/dt = 100 A/ms, I

to 1.0 V)

REC

2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

V @ 175°C

V @ 25°C

V @ 100°C

0.1

0.3

0.1

0.5

0.7

0.9

1.1

1.3

0.3

0.5

0.7

0.9

1.1

1.3

V , INSTANTANEOUS VOLTAGE (VOLTS)

Figure 1. Maximum Forward Voltage

Figure 2. Typical Forward Voltage

http://onsemi.com

MUR210

1000

100

100.000

10.000

1.000

I @ 175°C

I @ 100°C

0.100

I @ 25°C

0.010

0.001

100

0.1

100

3.0

V , REVERSE VOLTAGE (VOLTS)

Figure 3. Maximum Reverse Current

Figure 4. Typical Reverse Current

2.5

T = 175°C

2.0

1.5

1.0

0.5

0.0

Square Wave

100

150

200

0.0

0.5

1.0

1.5

2.0

2.5

T , AMBIENT TEMPERATURE (°C)

, AVERAGE FORWARD CURRENT

F(AV)

Figure 5. Current Derating

Figure 6. Power Dissipation

T = 25°C

V , REVERSE VOLTAGE (VOLTS)

Figure 7. Maximum Capacitance

Figure 8. Typical Capacitance

http://onsemi.com

MUR210

NOTE 3 − AMBIENT MOUNTING DATA

Data shown for thermal resistance junction to

ambient (R ) for the mountings shown is to be

qJA

used as typical guideline values for preliminary

engineering or in case the tie point temperature

cannot be measured.

TYPICAL VALUES FOR R

IN STILL AIR

Lead Length, L

Mounting

Method

1/8

1/4

1/2

Units

°C/W

MOUNTING METHOD 1

MOUNTING METHOD 2

Vector Pin Mounting

MOUNTING METHOD 3

L = 3/8″

Board Ground Plane

P.C. Board with

1−1/2″ X 1−1/2″ Copper Surface

http://onsemi.com

MUR210

PACKAGE DIMENSIONS

AXIAL LEAD

CASE 59−10

ISSUE U

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. ALL RULES AND NOTES ASSOCIATED WITH

JEDEC DO−41 OUTLINE SHALL APPLY

4. POLARITY DENOTED BY CATHODE BAND.

5. LEAD DIAMETER NOT CONTROLLED WITHIN F

DIMENSION.

INCHES

DIM MIN MAX

MILLIMETERS

MIN

4.10

2.00

0.71

−−−

MAX

5.20

2.70

0.86

1.27

−−−

0.161 0.205

0.079 0.106

0.028 0.034

−−− 0.050

1.000

−−− 25.40

POLARITY INDICATOR

OPTIONAL AS NEEDED

(SEE STYLES)

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

ON Semiconductor and

are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

For additional information, please contact your

local Sales Representative.

MUR210/D

http://onsemi.com

相关型号：