MUR210RL [ONSEMI]

SWITCHMODEE Power Rectifier; SWITCHMODEE电力整流器


型号：	MUR210RL
厂家：	ONSEMI
描述：	SWITCHMODEE Power Rectifier SWITCHMODEE电力整流器二极管超快速恢复能力电源超快恢复二极管快速恢复二极管
文件：	总8页 (文件大小：45K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MUR210

Preferred Device

SWITCHMODE

Power Rectifier

. . . designed for use in switching power supplies, inverters and as

free wheeling diodes, these state–of–the–art devices have the

following features:

http://onsemi.com

• Ultrafast 20 Nanosecond Recovery Times

• 175°C Operating Junction Temperature

• Low Forward Voltage

• Low Leakage Current

• High Temperature Glass Passivated Junction

Mechanical Characteristics

ULTRAFAST

RECTIFIERS

2 AMPERES

100 VOLTS

• Case: Epoxy, Molded

• Weight: 0.4 gram (approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead and Mounting Surface Temperature for Soldering Purposes:

220°C Max. for 10 Seconds, 1/16″ from case

• Shipped in plastic bags, 1000 per bag

• Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to

the part number

• Polarity: Cathode Indicated by Polarity Band

• Marking: MUR210

PLASTIC

AXIAL LEAD

CASE 059

MAXIMUM RATINGS

MARKING DIAGRAM

MUR210

Rating

Symbol

Value

Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

100

—

Volts

RRM

RWM

MUR210 = Device Code

Average Rectified Forward Current

(Square Wave Mounting Method #3

Per Note 1.)

2.0 @

T = 100°C

Amps

°C

F(AV)

Non-Repetitive Peak Surge Current

(Surge applied at rated load conditions,

halfwave, single phase, 60 Hz)

FSM

ORDERING INFORMATION

Device

Package

Axial Lead

Shipping

Operating Junction Temperature and

Storage Temperature Range

T , T

–65 to

+175

stg

MUR210

1000 Units/Bag

1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.

MUR210RL

5000/Tape & Reel

Preferred devices are recommended choices for future use

and best overall value.

Semiconductor Components Industries, LLC, 2000

Publication Order Number:

September, 2000 – Rev. 0

MUR210/D

MUR210

THERMAL CHARACTERISTICS

Characteristic

Symbol

Value

Unit

Maximum Thermal Resistance, Junction to Ambient

ELECTRICAL CHARACTERISTICS

See Note 3.

°C/W

Maximum Instantaneous Forward Voltage (Note 2.)

Volts

µA

(I = 2.0 Amp, T = 150°C)

0.74

0.94

(I = 2.0 Amp, T = 25°C)

Maximum Instantaneous Reverse Current (Note 2.)

(Rated dc Voltage, T = 150°C)

(Rated dc Voltage, T = 25°C)

2.0

Maximum Reverse Recovery Time

(I = 1.0 Amp, di/dt = 50 Amp/µs)

(I = 0.5 Amp, I = 1.0 Amp, I

= 0.25 A)

to 1.0 V)

REC

Maximum Forward Recovery Time

(I = 1.0 A, di/dt = 100 A/µs, I

2. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.

V @ 175°C

V @ 25°C

V @ 100°C

0.1

0.3

0.1

0.5

0.7

0.9

1.1

1.3

0.3

0.5

0.7

0.9

1.1

1.3

V , INSTANTANEOUS VOLTAGE (VOLTS)

Figure 1. Maximum Forward Voltage

Figure 2. Typical Forward Voltage

http://onsemi.com

MUR210

1000

100

100.000

10.000

1.000

I @ 175°C

I @ 100°C

0.100

I @ 25°C

0.010

0.001

100

0.1

100

3.0

V , REVERSE VOLTAGE (VOLTS)

Figure 3. Maximum Reverse Current

Figure 4. Typical Reverse Current

2.5

T = 175°C

2.0

1.5

1.0

0.5

0.0

Square Wave

100

150

200

0.0

0.5

1.0

1.5

2.0

2.5

T , AMBIENT TEMPERATURE (°C)

I , AVERAGE FORWARD CURRENT

F(AV)

Figure 5. Current Derating

Figure 6. Power Dissipation

T = 25°C

V , REVERSE VOLTAGE (VOLTS)

Figure 7. Maximum Capacitance

Figure 8. Typical Capacitance

http://onsemi.com

MUR210

NOTE 3. – AMBIENT MOUNTING DATA

Data shown for thermal resistance junction to

ambient (R ) for the mountings shown is to be

θJA

used as typical guideline values for preliminary

engineering or in case the tie point temperature

cannot be measured.

TYPICAL VALUES FOR R

IN STILL AIR

Lead Length, L

Mounting

Method

1/8

1/4

1/2

Units

°C/W

MOUNTING METHOD 1

MOUNTING METHOD 2

Vector Pin Mounting

MOUNTING METHOD 3

L = 3/8″

Board Ground Plane

P.C. Board with

1–1/2″ X 1–1/2″ Copper Surface

http://onsemi.com

MUR210

PACKAGE DIMENSIONS

AXIAL LEAD

PLASTIC

CASE 59–04

ISSUE M

NOTES:

1. ALL RULES AND NOTES ASSOCIATED WITH

JEDEC DO-41 OUTLINE SHALL APPLY.

2. POLARITY DENOTED BY CATHODE BAND.

3. LEAD DIAMETER NOT CONTROLLED WITHIN F

DIMENSION.

MILLIMETERS

INCHES

DIM MIN

MAX

6.60

3.05

0.86

---

MIN

MAX

0.260

0.120

0.034

---

5.97

2.79

0.235

0.110

0.030

1.100

0.76

27.94

http://onsemi.com

MUR210

Notes

http://onsemi.com

MUR210

Notes

http://onsemi.com

MUR210

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes

without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular

purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,

including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be

validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.

SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or

death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold

SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable

attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim

alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

NORTH AMERICA Literature Fulfillment:

CENTRAL/SOUTH AMERICA:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)

Email: ONlit–spanish@hibbertco.com

Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada

Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada

Email: ONlit@hibbertco.com

ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support

Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)

Toll Free from Hong Kong & Singapore:

Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada

001–800–4422–3781

N. American Technical Support: 800–282–9855 Toll Free USA/Canada

Email: ONlit–asia@hibbertco.com

EUROPE: LDC for ON Semiconductor – European Support

German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)

Email: ONlit–german@hibbertco.com

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031

Phone: 81–3–5740–2700

French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)

Email: ONlit–french@hibbertco.com

English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)

Email: ONlit@hibbertco.com

Email: r14525@onsemi.com

ON Semiconductor Website: http://onsemi.com

EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781

For additional information, please contact your local

Sales Representative.

*Available from Germany, France, Italy, UK, Ireland

MUR210/D

http://onsemi.com

相关型号：