NC7SZ384P5X [ONSEMI]

1 位低功耗总线开关;
NC7SZ384P5X
型号: NC7SZ384P5X
厂家: ONSEMI    ONSEMI
描述:

1 位低功耗总线开关

开关
文件: 总11页 (文件大小:328K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Is Now Part of  
To learn more about ON Semiconductor, please visit our website at  
www.onsemi.com  
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers  
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor  
product management systems do not have the ability to manage part nomenclature that utilizes an underscore  
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain  
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated  
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please  
email any questions regarding the system integration to Fairchild_questions@onsemi.com.  
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number  
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right  
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability  
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON  
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON  
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s  
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA  
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended  
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out  
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor  
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.  
November 1996  
Revised December 2005  
NC7SZ384  
1-Bit Low Power Bus Switch  
General Description  
Features  
The NC7SZ384 provides 1-bit of ultra high-speed CMOS TTL-  
compatible bus switch. The low On Resistance of the switch  
allows inputs to be connected to outputs with minimal propaga-  
tion delay and without generating additional ground bounce  
noise. The device is organized as a 1-bit switch with a bus  
enable (OE) signal. When OE is LOW, the switch is on and Port  
A is connected to Port B. When OE is HIGH, the switch is open  
and a high-impedance state exists between the two ports.  
Space saving SOT23 or SC70 5-lead package  
Ultra small MicroPak leadless package  
5
switch connection between two ports  
Minimal propagation delay through the switch  
Low I  
CC  
Zero bounce in flow-through mode  
Control inputs compatible with TTL level  
Ordering Code:  
Order  
Package  
Product Code  
Package Description  
Supplied As  
Number  
NC7SZ384M5X  
NC7SZ384P5X  
NC7SZ384L6X  
Number  
MA05B  
Top Mark  
8Z84  
5-Lead SOT23, JEDEC MO-178, 1.6mm  
3k Units on Tape and Reel  
MAA05A  
MAC06A  
Z84  
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel  
C3  
Pb-Free 6-Lead MicroPak, 1.0mm Wide  
5k Units on Tape and Reel  
Pb-Free package per JEDEC J-STD-020B.  
Logic Diagram  
Connection Diagrams  
Pin Assignments for SOT23 and SC70  
Pin Description  
Pin Name  
Description  
(Top View)  
OE  
A
Bus Switch Enable  
Bus A  
Pad Assignments for MicroPak  
B
Bus B  
NC  
No Connect  
Truth Table  
BO  
OE  
Function  
(Top Through View)  
L
A
Connect  
O
H
HIGH-Z State  
Disconnect  
MicroPak is a trademark of Fairchild Semiconductor Corporation.  
© 2005 Fairchild Semiconductor Corporation  
DS012178  
www.fairchildsemi.com  
Absolute Maximum Ratings(Note 1)  
Recommended Operating  
Conditions (Note 3)  
Supply Voltage (V  
)
0.5V to 7.0V  
0.5V to 7.0V  
0.5V to 7.0V  
CC  
DC Switch Voltage (V )  
S
Power Supply Operating (V  
)
4.0V to 5.5V  
0V to 5.5V  
0V to 5.5V  
CC  
DC Input Voltage (V ) (Note 2)  
IN  
Input Voltage (V  
)
IN  
DC Input Diode Current  
Output Voltage (V  
)
OUT  
(I ) V  
0V  
50 mA  
IK  
IN  
Input Rise and Fall Time (t , t )  
r
f
DC Output (I  
) Sink Current  
128 mA  
OUT  
Switch Control Input  
Switch I/O  
0 ns/V to 5 ns  
0 ns/V to DC  
40 C to 85 C  
DC V /GND Current  
CC  
(I /I  
)
100 mA  
65 C to 150 C  
150 C  
CC GND  
Operating Temperature (T )  
A
Storage Temperature Range  
(T  
Thermal Resistance (  
SOT23-5  
)
JA  
)
STG  
300 C/W  
425 C/W  
Junction Temperature  
under Bias (T )  
SC70-5  
J
Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety  
of the device cannot be guaranteed. The device should not be operated at these lim-  
its. The parametric values defined in the Electrical Characteristics tables are not  
guaranteed at the absolute maximum ratings. The “Recommended Operating Condi-  
tions” table will define the conditions for actual device operation.  
Junction Lead Temperature (T )  
L
(Soldering, 10 Seconds)  
260 C  
Power Dissipation (P ) @ 85 C  
D
SOT23-5  
SC70-5  
200 mW  
150 mW  
Note 2: The input and output negative voltage ratings may be exceeded if the input  
and output diode current ratings are observed.  
Note 3: Unused inputs must be held HIGH or LOW. They may not float.  
DC Electrical Characteristics  
V
T
40 C to 85 C  
CC  
A
Symbol  
Parameter  
Clamp Diode Voltage  
Units  
Conditions  
(V)  
4.5  
Min  
Typ  
Max  
V
V
V
1.2  
V
V
V
A
A
I
18 mA  
IK  
IN  
HIGH Level Input Voltage  
LOW Level Input Voltage  
Input Leakage Current  
“OFF” Leakage Current  
Switch On Resistance  
(Note 4)  
4.5–5.5  
4.5–5.5  
5.5  
2.0  
IH  
IL  
0.8  
1.0  
10.0  
7
I
0
V
5.5V  
IN  
IN  
I
5.5  
0
A, B  
V
OFF  
CC  
R
4.5  
3
3
V
V
V
V
V
0V, I  
64 mA  
30 mA  
15 mA  
15 mA  
ON  
IN  
IN  
IN  
IN  
IN  
IN  
IN  
4.5  
7
0V, I  
4.5  
6
15  
20  
10  
2.4V, I  
2.4V, I  
IN  
IN  
4.0  
10  
I
Quiescent Supply Current  
5.5  
A
V
or GND  
CC  
CC  
I
0
O
I
Increase in I per Input (Note 5)  
5.5  
0.9  
2.5  
mA  
V
3.4V, I  
O
0, Control Input only  
CC  
CC  
IN  
Note 4: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the  
voltages on the two (A or B) pins.  
Note 5: Per TTL driven input (V  
3.4V, control input only). A and B pins do not contribute to I  
.
CC  
IN  
www.fairchildsemi.com  
2
AC Electrical Characteristics  
T
40 C to 85 C,  
50 pF, RU RD 500  
A
V
C
L
Symbol  
Parameter  
Units  
Conditions  
Figure  
CC  
(V)  
Min  
Typ  
Max  
Number  
(Note 6)  
t
,
Propagation Delay Bus to Bus  
(Note 7)  
4.0–5.5  
0.25  
ns  
V
OPEN  
Figures  
1, 2  
PHL  
I
t
PLH  
t
,
Output Enable Time  
4.5–5.5  
4.0  
1.0  
1.0  
1.0  
1.0  
2.5  
2.5  
5.0  
5.5  
5.0  
5.5  
ns  
ns  
ns  
ns  
V
V
V
V
7V for t  
PZL  
Figures  
1, 2  
PZL  
I
I
I
I
t
OPEN for t  
PZH  
PZH  
PHZ  
t
,
Output Disable Time  
4.5–5.5  
4.0  
7V for t  
Figures  
1, 2  
PLZ  
PLZ  
t
OPEN for t  
PHZ  
Note 6: All typical values are V  
5.0V, T  
25 C.  
CC  
A
Note 7: This parameter is guaranteed by design but is not tested. The bus switch contributes no propagation delay other than the RC delay of the typical On Resistance of the  
switch and the 50 pF load capacitance, when driven by an ideal voltage source (zero output impedance).  
Capacitance (Note 8)  
Symbol  
Parameter  
Control Pin Input Capacitance  
Typ  
2
Max  
6
Units  
pF  
Conditions  
C
C
V
V
5.0V  
IN  
CC  
CC  
Input/Output Capacitance  
25 C, f 1 MHz.  
4.5  
10  
pF  
, BE 5.0V  
I/O  
Note 8: T  
A
AC Loading and Waveforms  
Input driven by 50 source terminated in 50  
C
includes load and stray capacitance  
L
Input PRR 1.0 MHz; t  
500 ns  
W
FIGURE 1. AC Test Circuit  
FIGURE 2. AC Waveforms  
3
www.fairchildsemi.com  
Tape and Reel Specification  
TAPE FORMAT for SOT23 and SC70  
Package  
Tape  
Number  
Cavity  
Cover Tape  
Designator  
Section  
Leader (Start End)  
Carrier  
Cavities  
125 (typ)  
3000  
Status  
Empty  
Filled  
Status  
Sealed  
Sealed  
Sealed  
M5X, P5X  
Trailer (Hub End)  
75 (typ)  
Empty  
TAPE DIMENSIONS inches (millimeters)  
DIM Ko  
Package Tape Size  
DIM A  
DIM B  
DIM F  
DIM P1  
DIM W  
0.093  
(2.35)  
0.130  
(3.3)  
0.096  
(2.45)  
0.130  
(3.3)  
0.138 0.004  
(3.5 0.10)  
0.138 0.002  
(3.5 0.05)  
0.053 0.004  
(1.35 0.10)  
0.055 0.004  
(1.4 0.11)  
0.157  
(4)  
0.315 0.004  
(8 0.1)  
SC70-5  
8 mm  
0.157  
(4)  
0.315 0.012  
(8 0.3)  
SOT23-5  
8 mm  
www.fairchildsemi.com  
4
TAPE FORMAT for MicroPak  
Package  
Tape  
Number  
Cavity  
Cover Tape  
Designator  
Section  
Leader (Start End)  
Carrier  
Cavities  
125 (typ)  
5000  
Status  
Empty  
Filled  
Status  
Sealed  
Sealed  
Sealed  
L6X  
Trailer (Hub End)  
75 (typ)  
Empty  
REEL DIMENSIONS inches (millimeters)  
Tape Size  
A
7.0  
B
0.059  
C
0.512  
D
0.795  
N
2.165  
W1  
W2  
0.567  
(14.40)  
W3  
0.331 0.059/ 0.000  
W1 0.078/ 0.039  
8 mm  
(177.8)  
(1.50)  
(13.00)  
(20.20)  
(55.00)  
(8.40 1.50/ 0.00)  
(W1 2.00/ 1.00)  
5
www.fairchildsemi.com  
Physical Dimensions inches (millimeters) unless otherwise noted  
5-Lead SOT23, JEDEC MO-178, 1.6mm  
Package Number MA05B  
www.fairchildsemi.com  
6
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)  
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide  
Package Number MAA05A  
7
www.fairchildsemi.com  
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)  
Pb-Free 6-Lead MicroPak, 1.0mm Wide  
Package Number MAC06A  
www.fairchildsemi.com  
8
DISCLAIMER  
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY  
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY  
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT  
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.  
LIFE SUPPORT POLICY  
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES  
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION  
As used herein:  
provided in the labeling, can be reasonably expected to  
result in significant injury to the user.  
1. Life support devices or systems are devices or systems  
which, (a) are intended for surgical implant into the body, or  
(b) support or sustain life, or (c) whose failure to perform  
when properly used in accordance with instructions for use  
2. A critical component is any component of a life support  
device or system whose failure to perform can be reason-  
ably expected to cause the failure of the life support device  
or system, or to affect its safety or effectiveness.  
PRODUCT STATUS DEFINITIONS  
Definition of terms  
Datasheet Identification Product Status  
Definition  
Advance Information  
Formative or In Design This datasheet contains the design specifications for product develop-  
ment. Specifications may change in any manner without notice.  
Preliminary  
First Production  
Full Production  
Not In Production  
This datasheet contains preliminary data, and supplementary data will  
be published at a later date. Fairchild Semiconductor reserves the right  
to make changes at any time without notice in order to improve design.  
No Identification Needed  
Obsolete  
This datasheet contains final specifications. Fairchild Semiconductor  
reserves the right to make changes at any time without notice in order  
to improve design.  
This datasheet contains specifications on a product that has been dis-  
continued by Fairchild Semiconductor. The datasheet is printed for ref-  
erence information only.  
9
www.fairchildsemi.com  
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.  
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent  
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.  
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability  
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.  
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,  
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or  
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer  
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not  
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification  
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized  
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and  
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such  
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This  
literature is subject to all applicable copyright laws and is not for resale in any manner.  
PUBLICATION ORDERING INFORMATION  
LITERATURE FULFILLMENT:  
N. American Technical Support: 8002829855 Toll Free  
USA/Canada  
Europe, Middle East and Africa Technical Support:  
Phone: 421 33 790 2910  
Japan Customer Focus Center  
Phone: 81358171050  
ON Semiconductor Website: www.onsemi.com  
Order Literature: http://www.onsemi.com/orderlit  
Literature Distribution Center for ON Semiconductor  
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA  
Phone: 3036752175 or 8003443860 Toll Free USA/Canada  
Fax: 3036752176 or 8003443867 Toll Free USA/Canada  
Email: orderlit@onsemi.com  
For additional information, please contact your local  
Sales Representative  
© Semiconductor Components Industries, LLC  
www.onsemi.com  

相关型号:

NC7SZ384P5X_NL

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5, 1.25 MM, EIAJ, SC-88A, SC-70, 5 PIN
FAIRCHILD

NC7SZ384P5_NL

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5, 1.25 MM, LEAD FREE, EIAJ, SC-88A, SC-70, 5 PIN
FAIRCHILD

NC7SZ384_05

1-Bit Low Power Bus Switch
FAIRCHILD

NC7SZ386

TinyLogic UHS 3-Input Exclusive-OR Gate
FAIRCHILD

NC7SZ386L6X

TinyLogic UHS 3-Input Exclusive-OR Gate
FAIRCHILD

NC7SZ386L6X

TinyLogic UHS 3 输入互斥 OR 门极
ONSEMI

NC7SZ386P6X

TinyLogic UHS 3-Input Exclusive-OR Gate
FAIRCHILD

NC7SZ386P6X

TinyLogic UHS 3 输入互斥 OR 门极
ONSEMI

NC7SZ386P6X-L22347

TinyLogic UHS 3 输入互斥 OR 门极
ONSEMI

NC7SZ386_04

TinyLogic UHS 3-Input Exclusive-OR Gate
FAIRCHILD

NC7SZ38FHX

TinyLogic UHS 2 输入 NAND 门极(开漏输出)
ONSEMI

NC7SZ38FHX-L22175

TinyLogic UHS 2 输入 NAND 门极(开漏输出)
ONSEMI