NCP706_17 [ONSEMI]
Precision Very Low Dropout Voltage Regulator;型号: | NCP706_17 |
厂家: | ONSEMI |
描述: | Precision Very Low Dropout Voltage Regulator |
文件: | 总16页 (文件大小:621K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NCP706
1 A, 1% Precision Very Low
Dropout Voltage Regulator
with Enable
The NCP706 is a Very Low Dropout Regulator which provides up to
1 A of load current and maintains excellent output voltage accuracy of
1% including line, load and temperature variations. The operating
input voltage range from 2.4 V up to 5.5 V makes this device suitable
for Li−ion battery powered products as well as post−regulation
applications. The product is available in 2.1 V, 2.2 V, 2.95 V, 3.0 V and
3.3 V fixed output voltage options. NCP706 is fully protected against
overheating and output short circuit.
www.onsemi.com
MARKING
DIAGRAM
XXMG
XDFN8
CASE 711AS
G
Very small 8−pin XDFN8 1.6 x 1.2, 04P package makes the device
especially suitable for space constrained portable applications such as
tablets and smartphones.
XX = Specific Device Code
M
G
= Date Code
= Pb−Free Package
Features
(Note: Microdot may be in either location)
• Operating Input Voltage Range: 2.4 V to 5.5 V
• Fixed Output Voltage Options: 2.1 V, 2.2 V, 2.95 V, 3.0 V and 3.3 V
Other Output Voltage Options Available on Request.
• Low Quiescent Current of Typ. 200 mA
PIN CONNECTION
OUT
OUT
N/C
IN
1
2
3
4
8
7
6
5
• Very Low Dropout: 155 mV Max. at I
= 1 A
OUT
•
1% Accuracy Over Load/Line/Temperature
IN
• High PSRR: 60 dB at 1 kHz
EN
GND
• Internal Soft−Start to Limit the Inrush Current
• Thermal Shutdown and Current Limit Protections
• Stable with a 4.7 mF Ceramic Output Capacitor
• Available in XDFN8 1.6 x 1.2, 04P 8−pin Package
• These are Pb−Free Devices
SNS
(Top View)
IN
IN
OUT
OUT
N/C
8
7
6
5
1
2
3
4
Typical Applications
• Tablets, Smartphones,
EN
• Wireless Handsets, Portable Media Players
• Portable Medical Equipment
• Other Battery Powered Applications
GND
SNS
(Bottom View)
V
= 2.4 (2.5) − 5.5 V
V
= 2.1 (2.2) V @ 1 A
IN
OUT
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 15 of this data sheet.
IN
OUT
SNS
NCP706
GND
C
C
OUT
4.7 mF
Ceramic
IN
EN
ON
OFF
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
May, 2016 − Rev. 8
NCP706/D
NCP706
Figure 2. Simplified Internal Schematic Block Diagram
PIN FUNCTION DESCRIPTION
Pin No.
XDFN8
Pin Name
OUT
OUT
N/C
Description
1
2
3
4
5
6
Regulated output voltage. A minimum 4.7 mF ceramic capacitor is needed from this pin to ground to
assure stability.
Not connected. This pin can be tied to ground to improve thermal dissipation.
Remote sense connection. This pin should be connected to the output voltage rail.
Power supply ground.
SNS
GND
EN
Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator
into shutdown mode.
7
8
−
IN
IN
Input pin. A small capacitor is needed from this pin to ground to assure stability.
Exposed
Pad
This pad enhances thermal performance and is electrically connected to GND. It is recommended
that the exposed pad is connected to the ground plane on the board or otherwise left open.
www.onsemi.com
2
NCP706
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
−0.3 V to 6 V
−0.3 V to VIN + 0.3 V
−0.3 V to VIN + 0.3 V
Indefinite
Unit
V
Input Voltage (Note 1)
V
IN
Output Voltage
V
OUT
V
Enable Input
V
EN
V
Output Short Circuit Duration
Maximum Junction Temperature
Storage Temperature
t
s
SC
T
150
°C
°C
V
J(MAX)
T
−55 to 150
2000
STG
ESD Capability, Human Body Model (Note 2)
ESD Capability, Machine Model (Note 2)
ESD
HBM
ESD
200
V
MM
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTIS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per EIA/JESD22−A114
Latch−up Current Maximum Rating tested per JEDEC standard: JESD78
THERMAL CHARACTERISTICS
Rating
Symbol
Value
Unit
Thermal Characteristics, XDFN8 1.6x1.2, 04P
Thermal Resistance, Junction−to−Air
R
160
°C/W
q
JA
www.onsemi.com
3
NCP706
ELECTRICAL CHARACTERISTICS − VOLTAGE VERSION 2.1 V
−40°C ≤ T ≤ 125°C; V = V
+ 0.3 V or 2.4 V, whichever is greater; I
= 10 mA, C = C
= 4.7 mF, V = 0.9 V, unless
OUT EN
J
IN
OUT(NOM)
OUT
IN
otherwise noted. Typical values are at T = +25°C. (Note 3)
J
Parameter
Operating Input Voltage
Undervoltage lock−out
Output Voltage Accuracy
Line Regulation
Test Conditions
Symbol
Min
Typ
Max
5.5
Unit
V
V
IN
2.4
1.2
V
V
V
rising
UVLO
1.6
2.10
2
1.9
V
IN
+ 0.3 V ≤ V ≤ 4.5 V, I
= 0 – 1 A
V
OUT
2.079
2.121
V
OUT
OUT
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 10 mA
Reg
mV
mV
mV
IN
OUT
LINE
LOAD
LOAD
Load Regulation
I
= 0 mA to 1 A
Reg
2
OUT
Load Transient
I
= 10 mA to 1A or 10 mA to 1 A in 10 ms,
= 10 mF
Tran
120
OUT
C
OUT
Dropout voltage (Note 4)
Output Current Limit
Quiescent current
Ground current
I
= 1 A, V
= 2.1 V
V
300
230
mV
A
OUT
OUT(nom)
DO
V
= 90% V
I
CL
1.1
OUT
OUT(nom)
I
= 0 mA
= 1 A
I
180
200
0.1
1.5
mA
mA
mA
mA
OUT
OUT
Q
I
I
GND
Shutdown current
V
≤ 0 V, V = 2.0 to 5.5 V
1
5
EN
IN
Reverse Leakage Current
in Shutdown
V
V
= 5.5 V, V
< 0.4 V
= V
,
I
REV
IN
EN
OUT
OUT(NOM)
EN Pin High Threshold
EN Pin Low Threshold
V
EN
V
EN
Voltage increasing
Voltage decreasing
V
0.9
V
V
EN_HI
V
0.4
EN_LO
EN Pin Input Current
Turn−on Time
V
= 5.5 V
I
100
200
500
nA
EN
EN
C
= 4.7 mF,
t
ms
OUT
ON
from assertion EN pin to 98% V
out(nom)
Power Supply Rejection Ratio
Output Noise Voltage
V
V
= 2.6 V,
f = 100 Hz
f = 1 kHz
f = 10 kHz
PSRR
60
60
40
dB
IN
= 2.1 V
OUT
I
= 0.5 A
OUT
V
OUT
= 2.1 V, V = 2.6 V, I
= 0.5 A
V
NOISE
280
mV
rms
IN
OUT
f = 100 Hz to 100 kHz
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Temperature increasing from T = +25°C
T
160
20
°C
°C
J
SD
Temperature falling from T
T
SDH
−
−
SD
3. Performance guaranteed over the indicated operating temperature range by design and/or characterization production tested at
T = T = 25°C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.
J
A
4. Characterized when VOUT falls 100 mV below the regulated voltage at VIN = VOUT(NOM) + 0.3 V.
www.onsemi.com
4
NCP706
ELECTRICAL CHARACTERISTICS − VOLTAGE VERSION 2.2 V
−40°C ≤ T ≤ 125°C; V = V
+ 0.3 V or 2.5 V, whichever is greater; I
= 10 mA, C = C
= 4.7 mF, V = 0.9 V, unless
OUT EN
J
IN
OUT(NOM)
OUT
IN
otherwise noted. Typical values are at T = +25°C. (Note 5)
J
Parameter
Operating Input Voltage
Undervoltage lock−out
Output Voltage Accuracy
Line Regulation
Test Conditions
Symbol
VIN
Min
Typ
Max
5.5
Unit
V
2.5
1.2
V
V
V
rising
UVLO
VOUT
1.6
2.2
2
1.9
V
IN
+ 0.3 V ≤ V ≤ 4.5 V, I
= 0 – 1 A
2.178
2.222
V
OUT
OUT
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 10 mA
Reg
mV
mV
mV
IN
OUT
LINE
Load Regulation
I
= 0 mA to 1 A
Reg
2
OUT
LOAD
LOAD
Load Transient
I
= 10 mA to 1A or 10 mA to 1 A in 10 ms,
= 10 mF
Tran
120
OUT
C
OUT
Dropout voltage (Note 6)
Output Current Limit
Quiescent current
Ground current
I
= 1 A, V
= 2.2 V
VDO
300
230
1
mV
A
OUT
OUT(nom)
V
= 90% V
ICL
IQ
1.1
0.9
OUT
OUT(nom)
IOUT = 0 mA
IOUT = 1 A
180
200
0.1
mA
mA
mA
V
IGND
Shutdown current
V
≤ 0 V, V = 2.0 to 5.5 V
EN
IN
EN Pin High Threshold
EN Pin Low Threshold
V
V
Voltage increasing
Voltage decreasing
V
EN_HI
EN_LO
EN
EN
V
0.4
EN Pin Input Current
Turn−on Time
VEN = 5.5 V
= 4.7 mF, from assertion EN pin to 98%
I
100
200
500
nA
EN
C
t
ms
OUT
ON
V
out(nom)
Power Supply Rejection Ratio
Output Noise Voltage
V
= 3.2 V, V
= 0.5 A
= 2.2 V f = 100 Hz
f = 1 kHz
PSRR
55
70
60
dB
IN
OUT
I
OUT
f = 10 kHz
V
OUT
= 2.2 V, V = 2.7 V, I
= 0.5 A
VNOISE
300
mV
rms
IN
OUT
f = 100 Hz to 100 kHz
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Temperature increasing from TJ = +25°C
T
160
20
°C
°C
SD
Temperature falling from T
T
SDH
−
−
SD
5. Performance guaranteed over the indicated operating temperature range by design and/or characterization production tested at T = T =
J
A
25_C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.
6. Characterized when V
falls 100 mV below the regulated voltage at V = V
+ 0.3 V.
OUT
IN
OUT(NOM)
www.onsemi.com
5
NCP706
ELECTRICAL CHARACTERISTICS − VOLTAGE VERSION 2.95 V
−40°C ≤ T ≤ 125°C; V = V
+ 0.3 V or 3.3 V, whichever is greater; I
= 10 mA, C = C
= 4.7 mF, V = 0.9 V, unless
OUT EN
J
IN
OUT(NOM)
OUT
IN
otherwise noted. Typical values are at T = +25°C. (Note 7)
J
Parameter
Operating Input Voltage
Undervoltage lock−out
Output Voltage Accuracy
Line Regulation
Test Conditions
Symbol
Min
Typ
Max
5.5
Unit
V
V
IN
2.4
1.2
V
V
V
rising, I
= 0
UVLO
1.6
2.95
2
1.9
V
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 0 – 1 A
V
OUT
2.9205
2.9795
V
OUT
OUT
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 10 mA
Reg
mV
mV
mV
IN
OUT
LINE
LOAD
LOAD
Load Regulation
I
= 0 mA to 1 A, V = 3.3 V
Reg
2
OUT
IN
Load Transient
I
= 10 mA to 1 A in 10 ms, V = 3.5 V
Tran
120
OUT
IN
C
= 10 mF
OUT
Dropout voltage (Note 8)
Output Current Limit
Quiescent current
Ground current
I
= 1 A, V
= 3.0 V
V
155
230
230
1
mV
A
OUT
OUT(nom)
DO
V
= 90% V
I
CL
1.1
0.9
OUT
OUT(nom)
I
= 0 mA
= 1 A
I
170
200
0.1
mA
mA
mA
V
OUT
OUT
Q
I
I
GND
Shutdown current
V
≤ 0 V, V = 2.4 to 5.5 V
EN
IN
EN Pin High Threshold
EN Pin Low Threshold
V
V
Voltage increasing
Voltage decreasing
V
EN_HI
EN_LO
EN
EN
V
0.4
EN Pin Input Current
Turn−on Time
V
= 5.5 V
I
100
150
500
nA
EN
EN
C
= 4.7 mF, from assertion EN pin to 98%
t
ms
OUT
ON
V
out(nom)
Power Supply Rejection Ratio
Output Noise Voltage
V
= 3.5 V + 200 mVpp
f = 100 Hz
f = 1 kHz
f = 10 kHz
PSRR
65
58
52
dB
IN
modulation, V
= 2.95 V
OUT
I
= 0.5 A, C
= 4.7 mF
OUT
OUT
V
OUT
= 2.95 V, V = 4.0 V, I
= 0.5 A
V
NOISE
300
mV
rms
IN
OUT
f = 100 Hz to 100 kHz
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Temperature increasing from T = +25°C
T
160
20
°C
°C
J
SD
Temperature falling from T
T
SDH
−
−
SD
7. Performance guaranteed over the indicated operating temperature range by design and/or characterization production tested at T = T =
J
A
25_C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.
8. Characterized when V
falls 90 mV below the regulated voltage at V = 3.3 V, I
= 10 mA.
OUT
IN
OUT
www.onsemi.com
6
NCP706
ELECTRICAL CHARACTERISTICS − VOLTAGE VERSION 3.0 V
−40°C ≤ T ≤ 125°C; V = V
+ 0.3 V or 3.3 V, whichever is greater; I
= 10 mA, C = C
= 4.7 mF, V = 0.9 V, unless
OUT EN
J
IN
OUT(NOM)
OUT
IN
otherwise noted. Typical values are at T = +25°C. (Note 9)
J
Parameter
Operating Input Voltage
Undervoltage lock−out
Output Voltage Accuracy
Line Regulation
Test Conditions
Symbol
Min
Typ
Max
5.5
Unit
V
V
IN
2.4
1.2
V
V
V
rising, I
= 0
UVLO
1.6
3.0
2
1.9
V
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 0 – 1 A
V
OUT
2.97
3.03
V
OUT
OUT
IN
OUT
+ 0.3 V ≤ V ≤ 4.5 V, I
= 10 mA
Reg
mV
mV
mV
IN
OUT
LINE
LOAD
LOAD
Load Regulation
I
= 0 mA to 1 A, V = 3.3 V
Reg
2
OUT
IN
Load Transient
I
= 10 mA to 1 A in 10 ms, V = 3.5 V
Tran
120
OUT
IN
C
= 10 mF
OUT
Dropout voltage (Note 10)
Output Current Limit
Quiescent current
Ground current
I
= 1 A, V
= 3.0 V
V
155
230
230
1
mV
A
OUT
OUT(nom)
DO
V
= 90% V
I
CL
1.1
0.9
OUT
OUT(nom)
I
= 0 mA
= 1 A
I
170
200
0.1
mA
mA
mA
V
OUT
OUT
Q
I
I
GND
Shutdown current
V
≤ 0 V, V = 2.0 to 5.5 V
EN
IN
EN Pin High Threshold
EN Pin Low Threshold
V
V
Voltage increasing
Voltage decreasing
V
EN_HI
EN_LO
EN
EN
V
0.4
EN Pin Input Current
Turn−on Time
V
= 5.5 V
I
100
150
500
nA
EN
EN
C
= 4.7 mF, from assertion EN pin to 98%
t
ms
OUT
ON
V
out(nom)
Power Supply Rejection Ratio
Output Noise Voltage
V
= 3.5 V + 200 mVpp
f = 100 Hz
f = 1 kHz
f = 10 kHz
PSRR
65
58
52
dB
IN
modulation, V
= 3.0 V
OUT
I
= 0.5 A, C
= 4.7 mF
OUT
OUT
V
OUT
= 3.0 V, V = 4.0 V, I
= 0.5 A
V
NOISE
300
mV
rms
IN
OUT
f = 100 Hz to 100 kHz
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Temperature increasing from T = +25°C
T
160
20
°C
°C
J
SD
Temperature falling from T
T
SDH
−
−
SD
9. Performance guaranteed over the indicated operating temperature range by design and/or characterization production tested at T = T =
J
A
25_C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.
10.Characterized when V
falls 90 mV below the regulated voltage at V = 3.3 V, I
= 10 mA.
OUT
IN
OUT
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
7
NCP706
TYPICAL CHARACTERISTICS
2.102
2.100
2.098
2.096
2.094
2.092
2.090
2.208
V
= 2.4 V
= 10 mA
= 4.7 mF
V
= 2.5 V
= 10 mA
= 4.7 mF
IN
IN
I
C
I
C
OUT
OUT
2.204
2.200
2.196
2.192
2.188
2.184
OUT
OUT
V
= 2.1 V
V
= 2.2 V
OUT(NOM)
OUT(NOM)
−40 −20
0
20
40
60
80
100 120
−40 −20
0
20
40
60
80
100 120
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 3. Output Voltage vs. Temperature
Figure 4. Output Voltage vs. Temperature
2.4
2.0
1.6
1.2
0.8
0.4
0.0
3.004
3.002
3.000
V
= V
EN
IN
T = 25°C
A
2.998
2.996
C
= 4.7 mF
OUT
OUT(NOM)
V
= 2.1 V
I
I
I
I
= 10 mA
OUT
OUT
OUT
OUT
V
= 3.3 V
= 10 mA
= 1 mF
= 3.0 V
IN
= 50 mA
= 250 mA
= 500 mA
I
OUT
2.994
2.992
C
OUT
V
OUT(NOM)
−40 −20
0
20
40
60
80
100 120
0.0
1.0
2.0
3.0
4.0
5.0
TEMPERATURE (°C)
INPUT VOLTAGE (V)
Figure 5. Output Voltage vs. Temperature
Figure 6. Output Voltage vs. Input Voltage
2.4
2.0
1.6
1.2
0.8
0.4
0.0
3.5
3.0
2.5
2.0
1.5
1.0
V
= V
V
= V
IN
EN
IN EN
T = 25°C
T = 25°C
A
A
C
= 4.7 mF
C
= 1 mF
OUT
OUT(NOM)
OUT
= 3.0 V
OUT(NOM)
V
= 2.2 V
V
I
I
I
I
= 10 mA
= 50 mA
= 250 mA
= 500 mA
I
I
I
I
= 10 mA
= 50 mA
= 250 mA
= 500 mA
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
0.5
0.0
0.0
1.0
2.0
3.0
4.0
5.0
0.0
1.0
2.0
3.0
4.0
5.0
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 7. Output Voltage vs. Input Voltage
Figure 8. Output Voltage vs. Input Voltage
www.onsemi.com
8
NCP706
TYPICAL CHARACTERISTICS
260
240
220
200
180
160
140
240
I
= 0
= 4.7 mF
I
= 0
= 4.7 mF
OUT
OUT
C
C
OUT
OUT
220
200
180
160
140
120
T = 125°C
V
= 2.2 V
V
= 2.1 V
A
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 9. Quiescent Current vs. Input Voltage
Figure 10. Quiescent Current vs. Input Voltage
260
240
220
200
180
160
140
240
220
200
180
160
140
120
V
V
V
= 2.4 V
= 4.0 V
= 5.5 V
I
= 0
= 1 mF
= 3.0 V
V
IN
V
IN
= 3.0 V
= 5.0 V
IN
IN
IN
OUT
C
OUT
V
OUT(NOM)
T = 125°C
A
T = 25°C
A
T = −40°C
A
C
= 4.7 mF
OUT
T = 25°C
A
V
= 2.1 V
OUT(NOM)
3.0
3.5
4.0
4.5
5.0
5.5
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
INPUT VOLTAGE (V)
OUTPUT CURRENT (A)
Figure 11. Quiescent Current vs. Input Voltage
Figure 12. Ground Current vs. Output Current
260
240
220
200
180
160
140
260
240
220
200
V
V
V
= 3.3 V
= 4.0 V
= 5.0 V
V
IN
V
IN
V
IN
= 3.5 V
= 4.5 V
= 5.5 V
IN
IN
IN
V
V
V
= 2.5 V
= 4.0 V
= 5.5 V
V
IN
V
IN
= 3.0 V
= 5.0 V
IN
IN
IN
180
160
140
C
= 4.7 mF
C
= 1 mF
OUT
OUT
T = 25°C
T = 25°C
A
A
V
= 2.2 V
V
= 3.0 V
OUT(NOM)
OUT(NOM)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
OUTPUT CURRENT (A)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
OUTPUT CURRENT (A)
Figure 13. Ground Current vs. Output Current
Figure 14. Ground Current vs. Output Current
www.onsemi.com
9
NCP706
TYPICAL CHARACTERISTICS
2
1.8
1.6
1.4
1.2
1
1.8
V
= 0
V
= 0
= V
OUT
OUT
1.6
1.4
1.2
1.0
0.8
0.6
0.4
V
EN
= V
V
IN
EN IN
C
= 4.7 mF
C
= 4.7 mF
OUT
OUT
T = 25°C
T = 25°C
A
A
V
= 2.1 V
V
= 2.2 V
OUT(NOM)
OUT(NOM)
0.8
0.6
0.4
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 15. Short Current Limitation vs. Input
Voltage
Figure 16. Short Current Limitation vs. Input
Voltage
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
1.8
1.7
1.6
1.5
1.4
V
= V
IN
= 4.7 mF
V
= 0
EN
OUT
C
V
EN
= V
OUT
IN
125°C
25°C
V
= 2.1 V
C
= 1 mF
OUT(NOM)
OUT
T = 25°C
A
V
= 3.0 V
OUT(NOM)
−40°C
1.3
1.2
3.0
3.5
4.0
4.5
5.0
5.5
0
0.2
0.4
0.6
0.8
1
INPUT VOLTAGE (V)
OUTPUT CURRENT (A)
Figure 17. Short Current Limitation vs. Input
Voltage
Figure 18. Dropout Voltage vs. Output Current
0.35
200
180
160
140
120
100
V
= V
IN
= 4.7 mF
EN
V
EN
= V
IN
C
OUT
125°C
0.30
0.25
0.20
0.15
0.10
C
= 1 mF
OUT
V
= 2.2 V
OUT(NOM)
V
= 3.0 V
OUT(NOM)
125°C
25°C
25°C
−40°C
80
60
40
−40°C
0.05
0.00
20
0
0
0.2
0.4
0.6
0.8
1
0
0.2
0.4
0.6
0.8
1
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Figure 19. Dropout Voltage vs. Output Current
Figure 20. Dropout Voltage vs. Output Current
www.onsemi.com
10
NCP706
TYPICAL CHARACTERISTICS
100
80
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
V
= 5.5 V
= 0
V
= 2.6 V + 200 mV Modulation
PP
IN
IN
V
EN
I
= 500 mA
OUT
C
= C
T = 25°C
= 4.7 mF
T = 25°C
IN
OUT
A
V
= 2.1 V
A
OUT(NOM)
60
40
C
C
C
= 22 mF
= 10 mF
= 4.7 mF
OUT
OUT
OUT
V
V
V
= 2.1 V
= 2.2 V
= 3.0 V
20
0
OUT(NOM)
OUT(NOM)
OUT(NOM)
0.0
1.0
2.0
3.0
4.0
5.0
0.1
1
10
FREQUENCY (kHz)
100
1000
FORCED OUTPUT VOLTAGE (V)
Figure 21. Reverse Leakage Current in
Shutdown
Figure 22. PSRR vs. Frequency & Output
Capacitor
100
80
60
40
20
0
80
V
= 2.7 V + 200 mV Modulation
V
= 3.5 V + 200 mV Modulation
IN
PP
IN PP
I
= 500 mA
I
= 500 mA
OUT
OUT
T = 25°C
T = 25°C
A
A
V
= 2.2 V
V
= 3.0 V
60
OUT(NOM)
OUT(NOM)
40
20
0
C
C
C
= 1 mF
= 2.2 mF
= 4.7 mF
C
C
C
= 22 mF
= 10 mF
= 4.7 mF
OUT
OUT
OUT
OUT
OUT
OUT
0.1
1
10
FREQUENCY (kHz)
100
1000
0.1
1
10
100
1000
FREQUENCY (kHz)
Figure 23. PSRR vs. Frequency & Output
Capacitor
Figure 24. PSRR vs. Frequency & Output
Capacitor
100
80
V
IN
= 3.7 V + 200 mV Modulation
PP
90
80
70
60
50
40
30
20
10
0
C
= 4.7 mF
T = 25°C
OUT
A
60
40
20
0
V
= 2.1 V
OUT(NOM)
V
= 3.2 V + 200 mV Modulation
PP
IN
C
= 4.7 mF
OUT
T = 25°C
A
V
= 2.2 V
OUT(NOM)
I
I
I
= 10 mA
= 100 mA
= 500 mA
I
I
I
= 10 mA
= 100 mA
= 500 mA
OUT
OUT
OUT
OUT
OUT
OUT
0.1
1.0
10
100
1000
0.1
1
10
FREQUENCY (kHz)
100
1000
FREQUENCY (kHz)
Figure 25. PSRR vs. Frequency & Output
Current
Figure 26. PSRR vs. Frequency & Output
Current
www.onsemi.com
11
NCP706
TYPICAL CHARACTERISTICS
2.5
80
60
40
I
= 500 mA
= 2.7 V
T = 25°C
V
= 3.5 V + 200 mV Modulation
PP
OUT
IN
V
IN
C
= 1 mF
OUT
T = 25°C
A
A
2.0
1.5
1.0
0.5
0.0
V
= 2.1 V
V
= 3.0 V
OUT(NOM)
OUT(NOM)
20
0
I
I
I
= 10 mA
= 100 mA
= 500 mA
OUT
OUT
OUT
C
C
= 4.7 mF
= 10 mF
OUT
OUT
0.01
0.1
1
10
100
1000
0.1
1
10
FREQUENCY (kHz)
100
1000
FREQUENCY (kHz)
Figure 27. PSRR vs. Frequency & Output
Current
Figure 28. Output Noise Density vs. Frequency
2.5
2.0
1.5
1.0
0.5
0.0
3.5
I
= 500 mA
= 4.0 V
T = 25°C
I
= 500 mA
OUT
OUT
V
V
IN
= 2.6 V
IN
3.0
2.5
2.0
1.5
1.0
T = 25°C
A
A
V
= 3.0 V
V
= 2.2 V
OUT(NOM)
OUT(NOM)
C
C
= 1 mF
= 2.2 mF
OUT
OUT
0.5
0.0
C
C
= 4.7 mF
= 10 mF
OUT
OUT
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 29. Output Noise Density vs. Frequency
Figure 30. Output Noise Density vs. Frequency
www.onsemi.com
12
NCP706
TYPICAL CHARACTERISTICS
Figure 31. Turn−on by Coupled Input and
Figure 32. Turn−on by Coupled Input and
Enable Pins
Enable Pins
Figure 33. Turn−on by Coupled Input and
Enable Pins
Figure 34. Turn−on by Enable Signal
Figure 35. Turn−on by Enable Signal
Figure 36. Turn−on by Enable Signal
www.onsemi.com
13
NCP706
TYPICAL CHARACTERISTICS
Figure 37. Line Transient Response
Figure 38. Line Transient Response
Figure 39. Line Transient Response
Figure 40. Load Transient Response
Figure 41. Load Transient Response
Figure 42. Load Transient Response
www.onsemi.com
14
NCP706
APPLICATIONS INFORMATION
Thermal
Input Decoupling (Cin)
A 4.7 mF capacitor either ceramic or tantalum is
recommended and should be connected as close as possible
to the pins of NCP706 device. Higher values and lower ESR
will improve the overall line transient response.
As power across the NCP706 increases, it might become
necessary to provide some thermal relief. The maximum
power dissipation supported by the device is dependent
upon board design and layout. Mounting pad configuration
on the PCB, the board material, and also the ambient
temperature affect the rate of temperature rise for the part.
This is stating that when the NCP706 has good thermal
conductivity through the PCB, the junction temperature will
be relatively low with high power dissipation.
Output Decoupling (Cout)
The minimum decoupling value for NCP706MX21TAG
and NCP706MX22TAG devices is 4.7 mF and can be
augmented to fulfill stringent load transient requirements.
The minimum decoupling value for NCP706MX295TAG
and NCP706MX706300TAG devices is 1 mF. The regulator
accepts ceramic chip capacitors MLCC. If a tantalum
capacitor is used, and its ESR is large, the loop oscillation
may result. Larger values improve noise rejection and
PSRR.
The power dissipation across the device can be roughly
represented by the equation:
ǒ
Ǔ
(eq. 1)
PD + VIN * VOUT * IOUT [W]
The maximum power dissipation depends on the thermal
resistance of the case and circuit board, the temperature
differential between the junction and ambient, PCB
orientation and the rate of air flow.
The maximum allowable power dissipation can be
calculated using the following equation:
Enable Operation
The enable pin EN will turn on or off the regulator. These
limits of threshold are covered in the electrical specification
section of this data sheet. If the enable is not used then the
ǒ
Ǔ
(eq. 2)
PMAX + TJ * TA ńqJA [W]
pin should be connected to V .
IN
Where (T − T ) is the temperature differential between
J
A
Hints
the junction and the surrounding environment and q is the
JA
Please be sure the V and GND lines are sufficiently wide.
If their impedance is high, noise pickup or unstable
operation may result.
Set external components, especially the output capacitor,
as close as possible to the circuit.
in
thermal resistance from the junction to the ambient.
Connecting the exposed pad and non connected pin 3 to
a large ground pad or plane helps to conduct away heat and
improves thermal relief.
The sense pin SNS trace is recommended to be kept as far
from noisy power traces as possible and as close to load as
possible.
ORDERING INFORMATION
Nominal Ooutput
†
Voltage
Device
Marking
Package
Shipping
NCP706MX21TAG
2.1 V
QM
XDFN8
(Pb−Free)
3000 / Tape & Reel
NCP706MX22TAG
NCP706MX295TAG
NCP706MX300TAG
2.2 V
2.95 V
3.0 V
3.3 V
QR
A2
A3
Q3
XDFN8
(Pb−Free)
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
XDFN8
(Pb−Free)
XDFN8
(Pb−Free)
NCP706MX33TAG
(In Development)
XDFN8
(Pb−Free)
3000 / Tape & Reel
(Available Soon)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
15
NCP706
PACKAGE DIMENSIONS
XDFN8 1.6x1.2, 0.4P
CASE 711AS
ISSUE D
NOTES:
L
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
D
A
B
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
8X
L1
DETAIL A
MILLIMETERS
OPTIONAL
DIM
A
A1
b
D
D2
E
E2
e
L
MIN
NOM
MAX
CONSTRUCTION
0.300 0.375 0.450
0.000 0.025 0.050
0.130 0.180 0.230
1.500 1.600 1.700
1.200 1.300 1.400
1.100 1.200 1.300
0.200 0.300 0.400
0.40 BSC
E
PIN ONE
IDENTIFIER
EXPOSED Cu
MOLD CMPD
TOP VIEW
DETAIL B
0.150 0.200 0.250
0.000 0.050 0.100
OPTIONAL
L1
A
CONSTRUCTION
DETAIL B
0.10
0.08
C
C
A1
8X
RECOMMENDED
MOUNTING FOOTPRINT*
SEATING
PLANE
NOTE 3
C
SIDE VIEW
D2
8X
0.35
1.44
PACKAGE
OUTLINE
DETAIL A
1
4
1.40
E2
8X
L1
1
0.44
0.40
PITCH
8X
0.26
DIMENSIONS: MILLIMETERS
8
5
8X b
8X
L
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
e
0.10
0.05
C
C
A
B
e/2
BOTTOM VIEW
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
NCP706/D
相关型号:
NCP707AMX150TCG
200 mA, Very-Low Quiescent Current, IQ 25 A, Low Noise, Low Dropout Regulator
ONSEMI
NCP707AMX180TCG
200 mA, Very-Low Quiescent Current, IQ 25 A, Low Noise, Low Dropout Regulator
ONSEMI
NCP707AMX185TCG
200 mA, Very-Low Quiescent Current, IQ 25 A, Low Noise, Low Dropout Regulator
ONSEMI
©2020 ICPDF网 联系我们和版权申明