NRVHP140SFT3G [ONSEMI]
Rectifier, Ultrafast 1 A 400 V;
| 型号： | NRVHP140SFT3G |
| 厂家： | 
ONSEMI |
| 描述： | Rectifier, Ultrafast 1 A 400 V 功效 测试 光电二极管 |
| 文件： | 总6页 (文件大小：137K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NHP140SF, NRVHP140SF
Surface Mount
Ultrafast Power Rectifier
Plastic SOD−123FL Package
This SOD−123FL ultrafast rectifier provides fast switching
performance with soft recovery in a compact thermally efficient
package. Its compact footprint makes it ideally suited to portable and
automotive applications where board space is at a premium. Its low
profile makes it a good option for flat panel display and other
applications with limited vertical clearance. The device offers low
leakage over temperature making it a good match for applications
requiring low quiescent current.
www.onsemi.com
ULTRAFAST RECTIFIER
1.0 AMPERES
400 VOLTS
Features
• Fast Soft Switching for Reduced EMI and Higher Efficiency
• Low Profile − Maximum Height of 1.0 mm
2
• Small Footprint − Footprint Area of 5.94 mm
SOD−123FL
CASE 498
• NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
MARKING DIAGRAM
Compliant
Mechanical Characteristics:
P14MG
• Case: Molded Epoxy
G
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 11.7 mg (Approximately)
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Maximum for 10 Seconds
• MSL 1
P14
M
= Specific Device Code
= Date Code
= Pb−Free Package
G
(Note: Microdot may be in either location)
Applications
• Automotive HID Lighting
ORDERING INFORMATION
• Diesel Piezo Injection
†
Device
Package
Shipping
• Power Factor Correction in Mini Adapters
• Freewheeling Diode Where Space is at a Premium
NHP140SFT3G
SOD−123 10000/Tape & Reel
(Pb−Free)
NRVHP140SFT3G SOD−123 10000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
February, 2016 − Rev. 0
NHP140SF/D
NHP140SF, NRVHP140SF
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
400
V
RRM
V
RWM
V
R
Average Rectified Forward Current
(T = 164°C)
L
I
1.0
2.0
A
A
O
Peak Repetitive Forward Current
I
FRM
(Square Wave, 20 kHz, T = 164°C)
L
Non−Repetitive Peak Surge Current
I
25
A
FSM
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
Storage and Operating Junction Temperature Range (Note 1)
T
stg
, T
J
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP /dT < 1/R .
q
JA
D
J
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Lead (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 3)
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Value
12
Unit
°C/W
°C/W
°C/W
Y
JCL
R
86.7
330
q
q
JA
JA
R
Test Conditions
Symbol
Typ
Max
Unit
(I = 1 A, T = 125°C)
V
F
0.9
1.1
1.01
1.2
1.10
1.25
1.20
1.40
V
Instantaneous Forward Voltage (Note 4)
F
C
(I = 1 A, T = 25°C)
F
C
(I = 2 A, T = 125°C)
F
C
(I = 2 A, T = 25°C)
F
C
Instantaneous Reverse Current (Note 4)
(Rated DC Voltage, T = 125°C)
I
R
5
25
0.5
mA
C
(Rated DC Voltage, T = 25°C)
0.015
C
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(I = 1 A, d /d = −50 A/ms, T = 25°C)
t
23
40
5
20
3
ns
A
nC
−
F
IF
t
C
rr
I
0.68
6.45
1.4
RM
Q
S
rr
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(I = 1 A, d /d = −50 A/ms, T = 125°C)
t
rr
RM
42
0.86
20
80
5
40
5
ns
A
nC
−
F
IF
t
C
I
Q
rr
S
1.9
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2
2
2. Mounted with 700 mm copper pad size (Approximately 1 in ) 1 oz FR4 Board.
2
3. Mounted with pad size approximately 20 mm copper, 1 oz FR4 Board.
4. Pulse Test: Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%.
www.onsemi.com
2
NHP140SF, NRVHP140SF
TYPICAL CHARACTERISTICS
100
10
100
T = 175°C
A
T = 175°C
A
T = 150°C
A
10
T = 150°C
A
T = 125°C
A
T = 125°C
A
1
1
T = 25°C
A
T = 25°C
A
T = −40°C
T = −40°C
A
A
0.1
0.1
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0
0
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2
V , INSTANTANEOUS FORWARD VOLTAGE (V)
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
F
Figure 1. Typical Instantaneous Forward
Characteristics
Figure 2. Maximum Instantaneous Forward
Characteristics
1.E−03
1.E−04
1.E−05
1.E−06
1.E−07
1.E−03
1.E−04
T = 175°C
A
T = 175°C
A
1.E−05
1.E−06
1.E−07
1.E−08
1.E−09
T = 125°C
A
T = 125°C
A
T = 150°C
A
T = 150°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
1.E−08
1.E−09
T = −40°C
A
1.E−10
1.E−11
0
100
200
300
400
100
200
300
400
V , INSTANTANEOUS REVERSE VOLTAGE (V)
R
V , INSTANTANEOUS REVERSE VOLTAGE (V)
R
Figure 3. Typical Reverse Characteristics
Figure 4. Maximum Reverse Characteristics
2
1000
100
10
T = 25°C
J
DC
Square Wave
1
0
R
= 12°C/W
q
JC
1
0
20 40 60 80 100 120 140 160 180 200
20
40
60
80
100 120 140 160 180
V , REVERSE VOLTAGE (V)
R
T , CASE TEMPERATURE (°C)
C
Figure 5. Typical Junction Capacitance
Figure 6. Current Derating
www.onsemi.com
3
NHP140SF, NRVHP140SF
TYPICAL CHARACTERISTICS
2.0
1.5
1.0
I
/I = 20
I
/I = 10
PK AV
PK AV
T = 175°C
J
I
/I = 5
PK AV
DC
0.5
0
Square Wave
0
0.2
0.4
0.6
0.8 1.0
I , AVERAGE FORWARD CURRENT (A)
F(AV)
Figure 7. Forward Power Dissipation
1000
100
50% (DUTY CYCLE)
25%
10%
5.0%
10 2.0%
1.0%
1.0
0.1
SINGLE PULSE
0.01
0.000001 0.00001
0.0001
0.001
0.01
PULSE TIME (s)
0.1
1.0
10
100
1000
Figure 8. Thermal Response, Junction−to−Ambient (20 mm2 pad)
100
10
50% (DUTY CYCLE)
25%
10%
5.0%
2.0%
1.0%
1.0
0.1
SINGLE PULSE
0.01
0.000001
0.00001
0.0001
0.001
0.01
PULSE TIME (s)
0.1
1.0
10
100
1000
Figure 9. Thermal Response, Junction−to−Ambient (1 in2 pad)
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FL
CASE 498
ISSUE D
DATE 10 MAY 2013
SCALE 4:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
E
q
3. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH.
4. DIMENSIONS D AND J ARE TO BE MEASURED ON FLAT SECTION
OF THE LEAD: BETWEEN 0.10 AND 0.25 MM FROM THE LEAD TIP.
D
1
2
MILLIMETERS
INCHES
NOM
0.037
0.002
0.035
0.006
0.065
0.106
0.030
0.142
−
DIM
A
A1
b
c
D
MIN
0.90
0.00
0.70
0.10
1.50
2.50
0.55
3.40
0°
NOM
0.95
0.05
0.90
0.15
1.65
2.70
0.75
3.60
−
MAX
MIN
0.035
0.000
0.028
0.004
0.059
0.098
0.022
0.134
0°
MAX
0.039
0.004
0.043
0.008
0.071
0.114
0.037
0.150
8°
A1
A
0.98
0.10
1.10
0.20
1.80
2.90
0.95
3.80
8°
POLARITY INDICATOR
OPTIONAL AS NEEDED
TOP VIEW
END VIEW
E
L
q
H
E
q
GENERIC
MARKING DIAGRAM*
H
E
c
SIDE VIEW
XXXMG
2X
L
G
2X
b
XXX = Specific Device Code
M
G
= Date Code
= Pb−Free Package
BOTTOM VIEW
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
RECOMMENDED
SOLDERING FOOTPRINT*
4.20
2X
1.25
2X
1.22
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON11184D
SOD−123FL
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
©2020 ICPDF网 联系我们和版权申明