NSVG3117SG6T1G [ONSEMI]
MMIC Wideband Amplifier, 5 V, 22.7 mA, 0.1 to 3 GHz, MCPH6;
| 型号： | NSVG3117SG6T1G |
| 厂家： | 
ONSEMI |
| 描述： | MMIC Wideband Amplifier, 5 V, 22.7 mA, 0.1 to 3 GHz, MCPH6 |
| 文件： | 总7页 (文件大小：232K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
MMIC Amplifier,
5 V, 22.7ꢀmA, 0.1 to 3 GHz,
MCPH6
SC−88FL / MCPH6
CASE 419AS
NSVG3117SG6
MARKING DIAGRAM
Features
• High Gain: Gp = 33.5 dB typ. @ 2.2 GHz
• Wideband Response: fu = 3.0 GHz
HLGM
G
• Low Current: I = 22.7 mA typ.
CC
• High Output Power: Po (1 dB) = 5.7 dBm
• Port Impedance: Input/Output: 50 W
• NSV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
HLG = Specific Device Code
M
G
= Date Code
= Pb−Free Package
• This is a Pb−Free Device
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of
this data sheet.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Symbol
Parameter
Supply Voltage
Ratings
Unit
V
V
CC
6
I
Circuit Current
40
mA
mW
°C
CC
P
Allowable Power Dissipation
Operating Temperature
Storage Temperature
280
D
Topr
Tstg
−40 to +125
−55 to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
RECOMMENDED OPERATING CONDITIONS (Ta = 25°C)
Ratings
Symbol
Parameter
Supply Voltage
Min
Typ
5
Max
5.5
Unit
V
V
CC
4.5
°C
Topr
Operating Ambient Temperature −40
+25
+125
Functional operation above the stresses listed in the Recommended Operating
Ranges is not implied. Extended exposure to stresses beyond the
Recommended Operating Ranges limits may affect device reliability.
© Semiconductor Components Industries, LLC, 2019
1
Publication Order Number:
March, 2022 − Rev. 0
NSVG3117SG6/D
NSVG3117SG6
ELECTRICAL CHARACTERISTICS (Ta = 25°C, V = 5 V, Zs = Z = 50 W)
CC
L
Ratings
Typ
22.7
31.2
33.5
37.6
36.5
11.2
6.0
Symbol
Parameter
Conditions
Min
18.5
29.5
30.5
35.0
34.0
9.0
4.5
11.0
12.0
−
Max
28.0
32.5
35.5
−
Unit
mA
dB
I
Circuit Current
Power Gain
CC
Gp
ISL
f = 1 GHz
f = 2.2 GHz
f = 1 GHz
f = 2.2 GHz
f = 1 GHz
f = 2.2 GHz
f = 1 GHz
f = 2.2 GHz
f = 1 GHz
f = 2.2 GHz
f = 1 GHz
f = 2.2 GHz
Isolation
dB
dB
−
RLin
RLout
NF
Input Return Loss
Output Return Loss
Noise Figure
−
−
14.3
16.3
4.1
−
dB
−
5.0
5.0
−
dB
−
3.9
Po (1dB) Gain 1dB Compression Output Power
(Note 2)
7.5
3.7
−
9.8
dBm
GHz
5.7
−
fu
Upper Limit Operating Frequency
(Note 2)
3 dB down below flat gain at f = 1GHz
3.0
−
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted.
2. On evaluation board.
Test Circuit
100 pF
IN
6
1
5
2
4
3
100 pF
100 nH
OUT
1000 pF
V
CC
Connect 2, 4 and 5 with GND.
Figure 1. Test Circuit
www.onsemi.com
2
NSVG3117SG6
Evaluation Board
OUT
IN
C1
C2
L1
C3
Symbol
C1, C2
C3
Value
100 pF
1000 pF
100 nH
V
CC
L1
Figure 2. Evaluation Board
Characteristics
30
25
20
15
10
5
0
0
1
2
3
4
5
6
Circuit Voltage, V − V
CC
Figure 3. ICC − VCC
www.onsemi.com
3
NSVG3117SG6
40
35
0
−5
5.5 V
5.0 V
5.5 V
4.5 V
−10
−15
−20
5.0 V
4.5 V
30
25
−25
−30
0
1
2
3
4
0
1
2
3
4
Frequency, f − GHz
Frequency, f − GHz
Figure 4. Gp − f
Figure 5. RLin − f
0
−5
0
−10
−10
−15
−20
−20
−30
4.5 V
5.5 V
5.0 V
5.5 V
5.0 V
4.5 V
−40
−50
−25
−30
0
1
2
3
4
0
1
2
3
4
Frequency, f − GHz
Frequency, f − GHz
Figure 6. ISL − f
Figure 7. RLout − f
20
10
20
10
V
= 5 V
V
= 5 V
CC
CC
f = 2.2 GHz
f = 1.0 GHz
0
0
−10
−20
−30
−10
−20
−30
−60
−50
−40
−30
−20
−10
0
−60
−50
−40
−30
−20
−10
0
Input Power, Pin − dBm
Input Power, Pin − dBm
Figure 8. Pout − Pin
Figure 9. Pout − Pin
www.onsemi.com
4
NSVG3117SG6
S Parameter
S11
S22
50
50
100
100
25
25
250
250
10
10
3GHz
50
2GHz
10
100
10
25
50
2GHz
100
1GHz
250
250
0
0
25
1GHz
3GHz
−10
−10
−250
−250
−25
−25
−100
−100
−50
−50
Figure 10. S Parameter (VCC = 5 V)
ORDERING INFORMATION
Specific Device
Marking
Package Type
(JEITA, JEDEC)
†
Device Order Number
Package Type
Shipping
NSVG3117SG6T1G
HLG
SC−88FL
(Pb−Free/Halogen Free)
MCPH6
(Pb−Free/Halogen Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−88FL / MCPH6
CASE 419AS
ISSUE A
DATE 28 SEP 2022
0.1
A
0.05 S
GENERIC
MARKING DIAGRAM*
XXX MG
G
XXX = Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON65646E
SC−88FL / MCPH6
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
©2020 ICPDF网 联系我们和版权申明