NTMFS4836NT3G [ONSEMI]
Power MOSFET 30V 90A 4 mOhm Single N-Channel SO-8FL;型号: | NTMFS4836NT3G |
厂家: | ONSEMI |
描述: | Power MOSFET 30V 90A 4 mOhm Single N-Channel SO-8FL 开关 脉冲 光电二极管 晶体管 功率场效应晶体管 |
文件: | 总2页 (文件大小:251K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BRD8045/D
Rev. 2, Sep-2006
Presenting
-48 V Telecom Power Conversion Solution
Daughter Card
FETs
NTMFS4836N
NTMFS4834N
3.3 V @ 10 A
-48 V (a)
-48 V (b)
SMART
HotPlug™
NIS5101
PWM
Controller
NCP1562
Dual Buck
Controller
NCP5425
+12 V
ORing
Diodes
MBR16100
FETs
2.5 V @ 10 A
NTMFS4836N
NTMFS4834N
Base Board
Expanded POL Support
Dual Buck
Controller
NCP5425
with FETs
Additional
POL Voltages
®
Complies with
Specifications
A comprehensive power conversion solution
for routers, switches and base stations
Highly integrated devices reduce part count
Robust hot swap protection includes innovative MOSFET
temperature sensing shutdown
State-of-the-art approach to DC-DC conversion
www.onsemi.com
© 2006, SCILLC. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC.
AdvancedTCA and the AdvancedTCA logo are registered trademarks of the PCI Industrial Computers Manufacturers Group.
Presenting
-48 V Telecom Power Conversion Solution
NIS5101 SMART HotPlug™ - a highly integrated hot swap protection circuit designed to enable the safe insertion
and removal of electronic equipment to -48 V backplanes. This device offers an adjustable current limit with no
external shunt required, features undervoltage and overvoltage lockouts and includes an integrated power MOSFET
switch.A unique temperature-sensing capability makes this the most robust hot swap IC available.
NCP1562 Active Clamp/Reset PWM Controller is a voltage mode controller designed for dc−dc converters requir-
ing high efficiency and low parts count. This controller incorporates two in phase outputs with an overlap delay to
prevent simultaneous conduction and facilitate soft switching. The device includes soft−stop circuitry to power
down the converter in a controlled manner if a severe fault is detected, and a cycle skip detector which enables a
soft−stop sequence if a continuous overcurrent condition is present.
NCP5425 Dual Synchronous Buck Controller is a highly flexible device with internal gate drivers that can provide
two independent outputs or one high current output. This feature-rich controller offers adjustable switching
frequency up to 750 kHz and a ±±1 0.8 V reference.
NTMFS4834N and NTMFS4836N MOSFETs offer high power efficiency and low RDS(on). Additionally, they are
offered in SO-8 Flat Lead packages with enhanced thermal performance.
BILL OF MATERIALS
ON SEMICONDUCTOR
PACKAGE
TO-220
EACH
AVAILABILITY
Production
Production
Sampling
DEVICE
MBR16100CTG
NIS5101E1T1G
NCP1562BDTBR2G
NCP5425DBG
2
1
1
1
2
2
SPAK
TSSOP-16
TSSOP-20
SO-8FL
Production
Production
Production
NTMFS4836NT1G
NTMFS4834NT1G
SO-8FL
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明