RS1MFP [ONSEMI]

表面贴装快速恢复整流器;


型号：	RS1MFP
厂家：	ONSEMI
描述：	表面贴装快速恢复整流器
文件：	总6页 (文件大小：338K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Is Now Part of

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

January 2016

RS1JFP - RS1MFP

Surface Mount Fast Recovery Rectifiers

Features

• Low Power Loss, High Efficiency

SOD-123HE

• Larger Cathode Pad for Improved Power Dissipation

• Ultra Thin Profile - Package Height <1.0 mm

• High Surge Capacity

• Low Forward Voltage: 1.3 V Maximum

Band Indicates Cathode

• UL Flammability 94V-0 Classification

• MSL 1 per J-STD-020

Cathode

Anode

• RoHS Compliant / Green Molding Compound

• Industrial Device Qualified per AEC-Q101 Standards

* See authorized use policy

Ordering Information

Part Number

RS1JFP

Top Mark

JLS

Package

SOD-123HE

Packing Method

Tape and Reel

RS1KFP

KLS

RS1MFP

MLS

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-

ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-

tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The

absolute maximum ratings are stress ratings only. Values are at T_A= 25°C unless otherwise noted.

Value

Symbol

Parameter

Unit

RS1JFP

600

RS1KFP

800

RS1MFP

1000

V_RRM

V_RMS

V_R

Repetitive Peak Reverse Voltage

RMS Reverse Voltage

420

560

700

DC Blocking Voltage

600

800

1000

I_F(AV)

Average Forward Rectified Current

1.2

Peak Forward Surge Current: 8.3 ms Single

Half Sine-Wave Superimposed on Rated Load

I_FSM

T_J

Operating Junction Temperature Range

Storage Temperature Range

-55 to +150

°C

T_STG

RS1JFP - RS1MFP Rev. 1.1

www.fairchildsemi.com

Thermal Characteristics⁽¹⁾

Values are at T_A= 25°C unless otherwise noted.

Symbol

ψ_JL

Parameter

Value

Unit

°C/W

Typical Thermal Characteristics, Junction-to-Lead⁽²⁾

R_θJA

Typical Thermal Resistance, Junction-to-Ambient

140

Notes:

1. Per JESD51-3 recommended thermal test board. Device mounted on FR-4 PCB, board size = 76.2 mm x 114.3 mm.

2. Thermocouple soldered at cathode lead.

Electrical Characteristics

Values are at T_A= 25°C unless otherwise noted.

Symbol

Parameter

Instantaneous Forward Voltage⁽³⁾

Conditions

I_F= 1.2 A

Min.

Typ.

Max.

1.3

Unit

V_F

T_J= 25°C

I_R

Reverse Current at Rated V_R

μA

T_J= 125°C

150

C_J

T_rr

Junction Capacitance

V_R= 0 V, f = 1 MHz

I_F= 0.5 A, I_R= 1 A,

I_rr= 0.25 A

Reverse Recovery Time

300

Note:

3. Pulse test with PW = 300 μs, 1% duty cycle

RS1JFP - RS1MFP Rev. 1.1

www.fairchildsemi.com

Typical Performance Characteristics

ꢆꢀꢀ

ꢆꢀ

ꢆꢁꢃ

ꢆꢁꢂ

ꢆ

T_J=125^oC

ꢀꢁꢅ

ꢀꢁꢄ

ꢆ

ꢀꢁꢃ

ꢀꢁꢆ

ꢀꢁꢀꢆ

RESISTIVE OR

INDUCTIVE LOAD

ꢀꢁꢂ

T_J=25^oC

ꢆꢀꢀ

ꢀ

ꢂꢀ

ꢃꢀ

ꢄꢀ

ꢅꢀ

ꢆꢂꢀ

ꢆꢃꢀ

ꢀ

ꢂꢇ

ꢇꢀ

ꢈꢇ

ꢆꢀꢀ

ꢆꢂꢇ

ꢆꢇꢀ

PERCENT OF RATED PEAK REVERSE VOLTAGE (%)

CASE TEMPERATURE (^oC)

Figure 2. Typical Reverse Characteristics

Figure 1. Maximum Forward Current

Derating Voltage

ꢆꢀ

ꢆꢀꢀ

ꢆꢀ

ꢆ

8.3ms Single

Half Sine Wave.

ꢀꢁꢆ

ꢀꢁꢃ

ꢀꢁꢄ

ꢀꢁꢅ

ꢆ

ꢆꢁꢂ

ꢆꢁꢃ

ꢆꢁꢄ

ꢆꢁꢅ

ꢂ

ꢆ

ꢆꢀ

ꢆꢀꢀ

FORWARD VOLTAGE (V)

NUMBER OF CYCLES AT 60 Hz

Figure 4. Typical Instantaneous

Forward Characteristics

Figure 3. Maximum Non-Repetitive

Forward Surge Current

ꢆꢀꢀ

f=1.0MHz

Vsig=50mVp-p

ꢆꢀ

ꢆ

ꢀꢁꢆ

ꢆ

ꢆꢀ

ꢆꢀꢀ

REVERSE VOLTAGE (V)

Figure 5. Typical Junction Capacitance

Figure 6. Reverse Recovery Time Characteristic and

Test Circuit Diagram

RS1JFP - RS1MFP Rev. 1.1

www.fairchildsemi.com

3.00

2.60

0.55

1.95

1.65

1.15

0.85

1.40

2.30

1.25

LAND PATTERN RECOMMENDATION

0.30

0.10

1.00

0.75

3.90

3.50

2.05

1.65

2.05

1.65

NOTES:

A. NO INDUSTRY STANDARD APPLIES TO THIS

PACKAGE.

B. ALL DIMENSIONS ARE IN MILLIMETERS.

C. DIMENSIONS ARE EXCLUSIVE OF BURRS,

MOLD FLASH AND TIE BAR PROTRUSIONS.

D. DRAWING FILE NAME: MKT-MA02Crev2

1.25

0.85

0.40

0.25

2.30

1.90

1.20

0.55

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

For additional information, please contact your local

Sales Representative

www.onsemi.com

RS1MFP [ONSEMI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E