首页 |元器件品牌

SA8.0ALF [ONSEMI]

DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 59, 2 PIN, Transient Suppressor;
SA8.0ALF
型号： SA8.0ALF
厂家： ONSEMI    ONSEMI
描述：

DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 59, 2 PIN, Transient Suppressor

电视
文件： 总6页 (文件大小：57K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
SA5.0A Series  
500 Watt Peak Power  
MiniMOSORBt Zener  
Transient Voltage  
Suppressors  
http://onsemi.com  
Unidirectional  
The SA5.0A series is designed to protect voltage sensitive  
components from high voltage, high energy transients. They have  
excellent clamping capability, high surge capability, low zener  
impedance and fast response time. The SA5.0A series is supplied in  
ON Semiconductor’s exclusive, cost-effective, highly reliable  
Surmetict axial leaded package and is ideally-suited for use in  
communication systems, numerical controls, process controls,  
medical equipment, business machines, power supplies and many  
other industrial/consumer applications.  
Cathode  
Anode  
AXIAL LEAD  
CASE 59AA  
PLASTIC  
Features  
• Working Peak Reverse Voltage Range − 5.0 to 170 V  
• Peak Power − 500 Watts @ 1.0 ms  
MARKING  
DIAGRAM  
• ESD Rating of Class 3 (>16 kV) per Human Body Model  
• Maximum Clamp Voltage @ Peak Pulse Current  
• Low Leakage < 1 mA above 8.5 V  
A
SAxxxA  
YYWWG  
G
• UL 497B for Isolated Loop Circuit Protection  
• Maximum Temperature Coefficient Specified  
• Response Time is typically < 1.0 ns  
A
= Assembly Location  
SAxxxA = Device Number  
• Pb−Free Packages are Available*  
xxx  
YY  
WW  
G
= (See Table Page 3)  
= Year  
= Work Week  
Mechanical Characteristics:  
= Pb−Free Package  
CASE: Void-free, Transfer-molded, Thermosetting Plastic  
FINISH: All external surfaces are corrosion resistant and leads are  
readily solderable  
MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230°C,  
1/16 in. from the case for 10 seconds  
(Note: Microdot may be in either location)  
ORDERING INFORMATION  
†
Device  
SAxxxA  
Package  
Shipping  
POLARITY: Cathode indicated by polarity band  
MOUNTING POSITION: Any  
Axial Lead  
1000 Units / Box  
1000 Units / Box  
SAxxxAG  
Axial Lead  
(Pb−Free)  
SAxxxARL*  
Axial Lead 5000 / Tape & Reel  
SAxxxARLG*  
Axial Lead 5000 / Tape & Reel  
(Pb−Free)  
SAxxxALF**  
Axial Lead  
2000 Units / Box  
2000 Units / Box  
SAxxxALFG**  
Axial Lead  
(Pb−Free)  
†For information on tape and reel specifications,  
including part orientation and tape sizes, please  
refer to our Tape and Reel Packaging Specifications  
Brochure, BRD8011/D.  
*SA8.0A, SA130A, and SA160A Not Available in 5000  
Reel.  
** Lead formed device.  
*For additional information on our Pb−Free strategy and soldering details, please  
download the ON Semiconductor Soldering and Mounting Techniques  
Reference Manual, SOLDERRM/D.  
©
Semiconductor Components Industries, LLC, 2006  
1
Publication Order Number:  
May, 2006 − Rev. 11  
SA5.0A/D  
SA5.0A Series  
MAXIMUM RATINGS  
Rating  
Symbol  
Value  
Unit  
Peak Power Dissipation (Note 1)  
P
500  
W
PK  
@ T ≤ 25°C  
L
Steady State Power Dissipation  
P
3.0  
30  
W
D
@ T ≤ 75°C, Lead Length = 3/8 in  
L
mW/°C  
Derated above T = 75°C  
L
Thermal Resistance, Junction−to−Lead  
R
33.3  
70  
°C/W  
q
JL  
Forward Surge Current (Note 2)  
I
A
FSM  
@ T = 25°C  
A
Operating and Storage Temperature Range  
T , T  
− 55 to +175  
°C  
J
stg  
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the  
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect  
device reliability.  
1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per Figure 2.  
A
2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute.  
ELECTRICAL CHARACTERISTICS (T = 25°C unless  
A
I
otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)  
F
F
I
F
Symbol  
Parameter  
I
Maximum Reverse Peak Pulse Current  
Clamping Voltage @ I  
PP  
V
C
PP  
V
V
V
BR RWM  
V
Working Peak Reverse Voltage  
C
RWM  
V
I
I
V
R
T
F
I
Maximum Reverse Leakage Current @ V  
R
RWM  
V
Breakdown Voltage @ I  
Test Current  
BR  
T
I
T
QV  
Maximum Temperature Variation of V  
Forward Current  
BR  
BR  
I
PP  
I
F
Uni−Directional TVS  
V
Forward Voltage @ I  
F
F
http://onsemi.com  
2
 
SA5.0A Series  
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)  
A
F
F
Breakdown Voltage  
V
@ I (Note 5)  
C
PP  
V
RWM  
V
(Note 4) (Volts)  
@ I  
V
I
(Note 3)  
I
@ V  
QV  
BR  
BR  
T
C
PP  
R
RWM  
Device  
Volts  
mA  
Min  
Nom  
6.7  
Max  
7
mA  
10  
10  
10  
1
Volts  
9.2  
A
mV/°C  
Marking  
Device*  
SA5.0A, G  
SA6.0A, G  
SA7.0A, G  
SA7.5A, G  
SA5.0A  
SA6.0A  
SA7.0A  
SA7.5A  
5
6
600  
600  
150  
50  
6.4  
54.3  
48.5  
41.7  
38.8  
5
5
6
7
6.67  
7.78  
8.33  
7.02  
8.19  
8.77  
7.37  
8.6  
10.3  
12  
7
7.5  
9.21  
12.9  
SA8.0A, G†  
SA8.5A, G  
SA9.0A, G  
SA10A, G  
SA8.0A  
SA8.5A  
SA9.0A  
SA10A  
8
8.5  
9
25  
5
8.89  
9.44  
10  
9.36  
9.92  
10.55  
11.7  
9.83  
10.4  
11.1  
12.3  
1
1
1
1
13.6  
14.4  
15.4  
17  
36.7  
34.7  
32.5  
29.4  
7
8
1
9
10  
1
11.1  
10  
SA11A, G  
SA12A, G  
SA13A, G  
SA14A, G  
SA11A  
SA12A  
SA13A  
SA14A  
11  
12  
13  
14  
1
1
1
1
12.2  
13.3  
14.4  
15.6  
12.85  
14  
13.5  
14.7  
15.9  
17.2  
1
1
1
1
18.2  
19.9  
21.5  
23.2  
27.4  
25.1  
23.2  
21.5  
11  
12  
13  
14  
15.15  
16.4  
SA15A, G  
SA16A, G  
SA17A, G  
SA18A, G  
SA15A  
SA16A  
SA17A  
SA18A  
15  
16  
17  
18  
1
1
1
1
16.7  
17.8  
18.9  
20  
17.6  
18.75  
19.9  
18.5  
19.7  
20.9  
22.1  
1
1
1
1
24.4  
26  
20.6  
19.2  
18.1  
17.2  
16  
17  
19  
20  
27.6  
29.2  
21.05  
SA20A, G  
SA22A, G  
SA24A, G  
SA26A, G  
SA20A  
SA22A  
SA24A  
SA26A  
20  
22  
24  
26  
1
1
1
1
22.2  
24.4  
26.7  
28.9  
23.35  
25.65  
28.1  
24.5  
26.9  
29.5  
31.9  
1
1
1
1
32.4  
35.5  
38.9  
42.1  
15.4  
14.1  
12.8  
11.9  
23  
25  
28  
30  
30.4  
SA28A, G  
SA30A, G  
SA33A, G  
SA36A, G  
SA28A  
SA30A  
SA33A  
SA36A  
28  
30  
33  
36  
1
1
1
1
31.1  
33.3  
36.7  
40  
32.75  
35.05  
38.65  
42.1  
34.4  
36.8  
40.6  
44.2  
1
1
1
1
45.4  
48.4  
53.3  
58.1  
11  
10.3  
9.4  
31  
36  
39  
41  
8.6  
SA40A, G  
SA43A, G  
SA45A, G  
SA48A, G  
SA51A, G  
SA58A, G  
SA60A, G  
SA64A, G  
SA40A  
SA43A  
SA45A  
SA48A  
SA51A  
SA58A  
SA60A  
SA64A  
40  
43  
45  
48  
51  
58  
60  
64  
1
1
1
1
1
1
1
1
44.4  
47.8  
50  
46.55  
50.3  
49.1  
52.8  
55.3  
58.9  
62.7  
71.2  
73.7  
78.6  
1
1
1
1
1
1
1
1
64.5  
69.4  
72.7  
77.4  
82.4  
93.6  
96.8  
103  
7.8  
7.2  
6.9  
6.5  
6.1  
5.3  
5.2  
4.9  
46  
50  
52  
56  
61  
70  
71  
76  
52.65  
56.1  
53.3  
56.7  
64.4  
66.7  
71.1  
59.7  
67.8  
70.2  
74.85  
SA64ALF, G  
SA70A, G  
SA78A, G  
SA90A, G  
SA100A, G  
SA64A  
SA70A  
SA78A  
SA90A  
SA100A  
64  
70  
1
1
1
1
1
71.1  
77.8  
86.7  
100  
111  
74.85  
81.9  
78.6  
86  
1
1
1
1
1
103  
113  
126  
146  
162  
4.9  
4.4  
4.0  
3.4  
3.1  
76  
85  
78  
91.25  
105.5  
117  
95.8  
111  
123  
95  
90  
110  
123  
100  
SA110A, G  
SA120A, G  
SA130A, G†  
SA150A, G  
SA110A  
SA120A  
SA130A  
SA150A  
110  
120  
130  
150  
1
1
1
1
122  
133  
144  
167  
128.5  
140  
135  
147  
159  
185  
1
1
1
1
177  
193  
209  
243  
2.8  
2.5  
2.4  
2.1  
133  
146  
158  
184  
151.5  
176  
SA160A, G†  
SA170A, G  
SA160A  
SA170A  
160  
170  
1
1
178  
189  
187.5  
199  
197  
209  
1
1
259  
275  
1.9  
1.8  
196  
208  
NOTE: Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future  
use and best overall value.  
3. MiniMOSORBt transients suppressor is normally selected according to the maximum working peak reverse voltage (V  
), which  
RWM  
should be equal to or greater than the dc or continuous peak operating voltage level.  
4. V measured at pulse test current I at an ambient temperature of 25°C.  
BR  
T
5. Surge current waveform per Figure 4 and derate per Figures 1 and 2.  
6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute  
*The “G’’ suffix indicates Pb−Free package available.  
†Not Available in the 5000/Tape & Reel.  
http://onsemi.com  
3
 
SA5.0A Series  
100  
10  
NONREPETITIVE PULSE  
WAVEFORM SHOWN IN  
FIGURE 4  
°
100  
80  
60  
40  
1
20  
0
0.1  
0.1 ms  
1 ms  
10 ms  
100 ms  
1 ms  
10 ms  
0
25 50 75 100 125 150 175 200  
T , AMBIENT TEMPERATURE (°C)  
A
t , PULSE WIDTH  
p
Figure 1. Pulse Rating Curve  
Figure 2. Pulse Derating Curve  
PULSE WIDTH (t ) IS  
p
DEFINED AS THAT POINT  
WHERE THE PEAK  
CURRENT DECAYS TO  
t ≤ 10 ms  
r
10,000  
100  
PEAK VALUE − I  
50% OF I  
.
PP  
PP  
MEASURED @  
ZERO BIAS  
1000  
100  
10  
I
PP  
2
HALF VALUE −  
50  
0
MEASURED @  
t
(V  
)
P
RWM  
0.1  
1
10  
100  
1000  
0
1
2
3
4
V
, BREAKDOWN VOLTAGE (VOLTS)  
BR  
t, TIME (ms)  
Figure 3. Capacitance versus Breakdown Voltage  
Figure 4. Pulse Waveform  
5
4
3/8″  
3/8″  
3
2
1
0
0
25 50 75 100 125 150 175 200  
T , LEAD TEMPERATURE (°C)  
L
Figure 5. Steady State Power Derating  
http://onsemi.com  
4
 
SA5.0A Series  
UL RECOGNITION*  
The entire series including the bidirectional CA suffix has  
Breakdown test, Endurance Conditioning, Temperature test,  
Dielectric Voltage-Withstand test, Discharge test and  
several more.  
Whereas, some competitors have only passed a  
flammability test for the package material, we have been  
recognized for much more to be included in their protector  
Underwriters Laboratory Recognition for the classification  
of protectors (QVGV2) under the UL standard for safety  
497B and File #E 116110. Many competitors only have one  
or two devices recognized or have recognition in a  
non-protective category. Some competitors have no  
recognition at all. With the UL497B recognition, our parts  
successfully passed several tests including Strike Voltage  
category.  
*Applies to SA5.0A, CA − SA170A, CA.  
http://onsemi.com  
5
SA5.0A Series  
PACKAGE DIMENSIONS  
AXIAL LEAD  
CASE 59AA−01  
ISSUE O  
(Similar to DO−204AC or DO−15)  
NOTES:  
1. DIMENSIONING AND TOLERANCING PER  
ANSI Y14.5M, 1982.  
B
2. CONTROLLING DIMENSION: INCH.  
3. ALL RULES AND NOTES ASSOCIATED WITH  
JEDEC DO−41 OUTLINE SHALL APPLY.  
4. POLARITY DENOTED BY CATHODE BAND.  
5. LEAD DIAMETER NOT CONTROLLED WITHIN  
F DIMENSION.  
D
6. REPLACES CASE 59−09.  
K
INCHES  
DIM MIN MAX  
MILLIMETERS  
MIN  
5.80  
2.60  
0.71  
MAX  
7.60  
3.60  
0.86  
−−−  
A
A
B
D
K
0.228 0.299  
0.102 0.142  
0.028 0.034  
1.000  
−−− 25.44  
K
MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.  
ON Semiconductor and  
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice  
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability  
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.  
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All  
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights  
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications  
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should  
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,  
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death  
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal  
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.  
PUBLICATION ORDERING INFORMATION  
LITERATURE FULFILLMENT:  
N. American Technical Support: 800−282−9855 Toll Free  
USA/Canada  
Europe, Middle East and Africa Technical Support:  
Phone: 421 33 790 2910  
Japan Customer Focus Center  
Phone: 81−3−5773−3850  
ON Semiconductor Website: www.onsemi.com  
Order Literature: http://www.onsemi.com/orderlit  
Literature Distribution Center for ON Semiconductor  
P.O. Box 5163, Denver, Colorado 80217 USA  
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada  
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada  
Email: orderlit@onsemi.com  
For additional information, please contact your local  
Sales Representative  
SA5.0A/D  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明