TRSL-7380WE-C490 [OPTOWAY]
Fiber Optic Device,;
| 型号： | TRSL-7380WE-C490 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | Fiber Optic Device, |
| 文件： | 总5页 (文件大小：154K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optoway
TRSL-7380W-CXX0
********************************************************************************************************************************************************************************
TRSL-7380W-CXX0
3.3V / CWDM / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
*******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
lDuplex LC Single Mode Transceiver
lCompliant with IEEE 802.3z 1000BASE
lCompliant with Fiber Channel 1X SM-LC-L FC-PI
lSmall Form Factor, RJ-45 size, 2X10 pin Package
l18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
l24 dB Link Power Budget at Least
lAnalog Monitor Function
The TRSL-7380W-CXX0 series single mode transceivers
is small form factor, low power, high performance module
for bi-directional serial optical data communications such
as IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. There are eighteen center
wavelengths available from 1270 nm to 1610 nm. A
guaranteed minimum optical link budget of 24 dB is
offered. The transmitter section uses a multiple quantum
well 1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
lAC/AC Coupled Signal Input / Output
lLVTTL Transmitter Disable Input
lLVTTL Signal Detection Output
lSingle +3.3 V Power Supply
l0 to 70oC Operation
LASER SAFETY
lWave Solderable and Aqueous Washable
lClass 1 Laser International Safety Standard IEC-60825
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
lGigabit Ethernet Switches and Routers
lFiber Channel Switch Infrastructure
lXDSL Applications
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
Power Wavelength Package
Temp. TX Power RX Sens.
Signal
Detect
Budget
(dB)
(nm)
(oC)
(dBm)
(dBm)
TRSL-7380W-CXX0 1.25/1.063
CWDM Wavelength (0 to 70oC)
ZX
> 24
CWDM* 2X10 LC
0 to 70
5 to 0
-24
LVTTL
Central
Wavelength
-C270
Min.
(nm)
Typ.
(nm)
1270
1290
1310
1330
1350
1370
1390
1410
1430
Max.
(nm)
Central
Wavelength
-C450
Min.
(nm)
Typ.
Max.
(nm)
(nm)
1450
1470
1490
1510
1530
1550
1570
1590
1610
1264.5
1284.5
1304.5
1324.5
1344.5
1364.5
1384.5
1404.5
1424.5
1277.5
1297.5
1317.5
1337.5
1357.5
1377.5
1397.5
1417.5
1437.5
1444.5
1464.5
1484.5
1504.5
1524.5
1544.5
1564.5
1584.5
1604.5
1457.5
1477.5
1497.5
1517.5
1537.5
1557.5
1577.5
1597.5
1617.5
-C290
-C310
-C330
-C350
-C370
-C390
-C410
-C430
-C470
-C490
-C510
-C530
-C550
-C570
-C590
-C610
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V2.0
Optoway
TRSL-7380W-CXX0
***************************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
Max
85
Units
oC
Notes
70
oC
Wit air flow 1m/sec
260
4.5
oC
V
10 seconds on leads only
0
GND
0
Vcc
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
3.1
Typ
Max
3.5
Units / Notes
Vcc
3.3
V
oC / air flow 1m/sec
Mb/s
Topr
0
70
1000
1250
200
300
mA
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
0
l -5.5
---
---
l
---
5
l +7.5
1
dBm
nm
nm
dB
1
2
-20 dB Width
Dl
SMSR
ER
30
9
---
---
dB
Output Eye
Compliant with IEEE 802.3z
Optical Rise Time
tr
tf
0.26
0.26
ns
ns
20% to 80% Values
20% to 80% Values
Optical Fall Time
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.227
dB/Hz
ns
3
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
IIL
-350
mA
mA
mV
V
IIH
350
VIH - VIL
VIL - VCC
VIH - VCC
VTDIS,L
VTDIS,H
tDIS
300
-2.0
-1.58
-0.74
0.5
4
-1.1
V
4
0
V
TX Output Enabled
TX Ouput Disabled
Vcc – 1.3
Vcc
1
V
ms
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
*****************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Fax: 886-3-5979737
Optoway
TRSL-7380W-CXX0
***************************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-3
---
---
0
---
---
---
---
-24
---
-24
---
dBm
dBm
dBm
dBm
dB
1
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Transition: low to high
Transition: high to low
Pd
-36
1.0
1100
1620
nm
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
VOL - VCC
VOH - VCC
VOL
-2.0
-1.1
-1.58
-0.74
0.8
V
V
V
V
2
2
VOH
2.0
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
ANALOG DIAGNOSTICS FUNCTIONS
Parameter
Symbol
Min
Typ
Max
Units
Notes
Transmitter
Laser Bias Current Monitor
Monitor Photodiode Current Monitor
Receiver
Bmon+, Bmon-
Pmon+,Pmon-
0
0
Vcc
Vcc
V
V
1
2
Received Photocurrent
Photodiode Responsivity
Applied Voltage at VpdR pin
Rpd
R
0
1
mA
A/W
V
3
0.5
2.4
0.9
1.0
Vcc
Vpd
3
Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following
formula: Ibias = V (Bmon+ - Bmon-) / 10 Ω. See below the equivalent circuit.
2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the
following formula: Imon = V (Pmon+ - Pon-) / 200Ω. See below the equivalent circuit.
3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified
above. The received power is given by the photocurrent multiplied by the photodiode responsivity.
VCC
VCC
LD
Monitor PD
3K
Vpdr
Pmon+
Pmon-
RX PD
BM+
BM-
I mon
3K
10ohm
I bias
I pd
200ohm
3K
3K
bias
circuit
control
circuit
T
Analog Monitoring Function Connections
*****************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Fax: 886-3-5979737
Optoway
TRSL-7380W-CXX0
***************************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN Symbol
Notes
PIN Symbol
Notes
Receiver power monitor. This pin must be
connected to a positive power supply (Vcc),
+3.3V dc transmitter power supply
1
VpdR
11 VccT
preferably via
a
small resistor. Supplier
photocurrent and maybe used to monitor receiver
power.
Receiver ground.
Receiver ground.
Transmitter ground.
2
3
VeeR
VeeR
12 VeeT
13 T Dis
Transmitter Disable. Connect this pin to logic “1”
to disable module. To enable module connect to
logic low “0”
No connected
No connected
Receiver ground.
+3.3V dc receiver power supply
Signal detect. Logic 1 indicate a normal operation.
Transmitter Data In
Transmitter Data In Bar
Transmitter ground.
Laser Bias Monitoring – Negative End
Laser Bias Monitoring – Positive End
(Bmon+ - Bmon-) = 10 Ω X laser bias current
4
5
6
7
8
NC
NC
VeeR
VccR
SD
14 TD +
15
TD -
16 VeeT
17 Bmon-
18 Bmon+
Receiver Dataout Bar
Receiver Dataout
Laser Power Monitoring -- Negative end
9
10
RD-
RD+
19 Pmon-
20 Pmon+
Laser Power Monitoring -- Positive end
(Pmon+ - Pmon-) = 200 Ω X monitor photdiode
current
MS
MS
Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
MICROSTRIP5
TD-
Tdis(LVTTL)
Bmon-
Z=50R
LVPECL
MICROSTRIP6
TD+
Z=5OR
Bmon+
Pmon-
L2
Pmon+
VCC3.3V
1uH
C2
C3
100nF
C4
10uF
PHY DEVICE
100nF
L1
TX
RX
1uH
C1
100nF
C8
10uF
Vcc3.3V
RD+
R14
200R
VCCRX(3.3V)
MICROSTRIP7
LVPECL
100R
Z=50R
10nF
MICROSTRIP8
RD-
Z=5OR
3K
SD
Vpdr
TO LVTTL STAGE
Note: 1. TX input is terminated inside the module.
2. Veer and Veet are not internally connected to each other.
Ω
3. 50 line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance
matching.
*****************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Fax: 886-3-5979737
Optoway
TRSL-7380W-CXX0
***************************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-7380W-CXX0
2) Extended Case
TRSL-7380WE-CXX0
Note: Specifications subject to change without notice.
*****************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Fax: 886-3-5979737
相关型号：
©2020 ICPDF网 联系我们和版权申明