TRSL-7385C-C590 [OPTOWAY]
Fiber Optic Device,;
| 型号： | TRSL-7385C-C590 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | Fiber Optic Device, |
| 文件： | 总5页 (文件大小：125K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optoway
TRSL-7385C-CXX0
*******************************************************************************************************************************************************************************
TRSL-7385C-CXX0 / TRSL-7385-CXX0
3.3V / CWDM / 1.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER
*****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l IEEE 802.3z Gigabit Ethernet 1000BASE Compliant
l Fiber Channel 1x SM-LC-L FC-PI Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
l 27 dB Link Power Budget at Least
The TRSL-7385C-CXX0 series single mode transceivers is
low power, high performance CWDM modules for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE and Fiber
Channel 1X SM-LC-L FC-PI. There are eighteen center
wavelengths available from 1270 nm to 1610 nm, each step
20 nm. A guaranteed minimum optical link budget of 27 dB
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
is offered. The transmitter section uses
a
multiple
quantum well DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
l LVTTL Signal Detection Output (TRSL-7385C-CXX0)
l LVPECL Signal Detection Output (TRSL-7385-CXX0)
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
Power Wavelength Package
Temp. TX Power RX Sens.
Signal
Detect
Budget
(dB)
(nm)
(oC)
(dBm)
(dBm)
TRSL-7385C-CXX0 1.25/1.063
CWDM Wavelength (0 to 70oC)
ZX
> 27
CWDM*
2X5 LC
0 to 70
5 to 0
-27
LVTTL
Central
Wavelength
-C270
Min.
(nm)
Typ.
(nm)
1270
1290
1310
1330
1350
1370
1390
1410
1430
Max.
(nm)
Central
Min.
(nm)
Typ.
Max.
(nm)
Wavelength
-C450
-C470
-C490
-C510
-C530
-C550
-C570
-C590
-C610
(nm)
1450
1470
1490
1510
1530
1550
1570
1590
1610
1264.5
1284.5
1304.5
1324.5
1344.5
1364.5
1384.5
1404.5
1424.5
1277.5
1297.5
1317.5
1337.5
1357.5
1377.5
1397.5
1417.5
1437.5
1444.5
1464.5
1484.5
1504.5
1524.5
1544.5
1564.5
1584.5
1604.5
1457.5
1477.5
1497.5
1517.5
1537.5
1557.5
1577.5
1597.5
1617.5
-C290
-C310
-C330
-C350
-C370
-C390
-C410
-C430
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V1.0
Optoway
TRSL-7385C-CXX0
****************************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
Max
85
Units
oC
Notes
70
oC
With air flow 1m/sec
260
4.5
oC
V
10 seconds on leads only
0
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
3.135
0
Typ
Max
3.465
70
Units / Notes
Vcc
3.3
V
oC / air flow 1m/sec
Mb/s
Topr
1000
1250
Power Supply Current
Icc
280
mA
Transmitter Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3. 465V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
0
l -5.5
---
---
5
l +7.5
1
dBm
nm
nm
dB
1
2
l
-20 dB Width
Dl
SMSR
ER
30
9
---
---
dB
Output Eye
Compliant with IEEE 802.3z
Optical Rise Time
tr
tf
0.26
0.26
ns
ns
20% to 80% Values
20% to 80% Values
Optical Fall Time
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.227
dB/Hz
ns
3
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
IIL
-350
mA
mA
mV
V
IIH
350
VIH - VIL
VIL - VCC
VIH - VCC
VTDIS,L
VTDIS,H
tDIS
300
-2.0
-1.58
-0.74
0.5
4
-1.1
V
4
0
V
TX Output Enabled
TX Ouput Disabled
Vcc – 1.3
Vcc
1
V
ms
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V1.0
Optoway
TRSL-7385C-CXX0
****************************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3. 465V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-3
---
---
0
---
---
---
---
-27
---
-27
---
dBm
dBm
dBm
dBm
dB
1
Maximum Input Power
Signal Detect -- Asserted
Transition: low to high
Transition: high to low
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Pd
-35
1.0
1100
1620
nm
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Signal Detect Output Voltage -- Low
VOL - VCC
VOH - VCC
VOL
-2.0
-1.1
-1.58
-0.74
0.8
V
V
V
V
V
V
2
2
TRSL-7385C-CXX0
VOH
2.0
-2.0
-1.1
VOL - VCC
-1.58
-0.74
TRSL-7385-CXX0
Signal Detect Output Voltage -- High VOH - VCC
1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
CONNECTION DIAGRAM
PIN
1
Symbol
VEE
Notes
r
Directly connect this pin to the receiver ground plane
+3.3V dc power for the receiver section
Active high on this indicates a received optical signal.
Receiver Dataout Bar. See recommended circuit schematic
Receiver Dataout. See recommended circuit schematic
+3.3V dc power for the transmitter section
2
3
VCC
SD
r
4
RD-
5
6
RD+
VCC
t
7
VEE
t
Directly connect this plan to the transmitter ground plane
8
TDis
Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module
To enable module connect to TTL logic low “0”
9
10
TD+
TD-
MS
Transmitter Data In. See recommended circuit schematic
Transmitter Data In Bar. See recommended circuit schematic
Mounting Studs. Connect to Chassis Ground
MS
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V1.0
Optoway
TRSL-7385C-CXX0
****************************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
TD-
Z=50R
LVPECL
TD+
Z=5OR
TXDis(LVTTL)
Vcc3.3V
1uH
10nF
10nF 10uF
10uF
PHY DEVICE
1uH
Vcc3.3V
10nF
10uF
RD+
RD-
100R
LVPECL
Z=50R
Z=5OR
SD
TO LVTTL STAGE
Note: 1. TX input is terminated inside the module.
2. 1000ΩSD Output pull-down resistor required for TRSL-73X0-CXX0 (LVPECL SD Output).
3. Veer and Veet are not internally connected to each other.
4. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for
better impedance matching.
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-7385-CXX0 / TRSL-7385C-CXX0
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V1.0
Optoway
TRSL-7385C-CXX0
****************************************************************************************************************************************************************************
2) Extended Case
TRSL-7385E-CXX0 / TRSL-7385CE-CXX0
Note: Specifications subject to change without notice.
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V1.0
相关型号：
©2020 ICPDF网 联系我们和版权申明