TRSL-8105AG [OPTOWAY]
3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER; 3.3V / 1310海里/ 4.25 Gbps的SFF LC单模收发器型号: | TRSL-8105AG |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | 3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER |
文件: | 总4页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
TRSL-8105G
***********************************************************************************************************************************************************************
TRSL-8105G / TRSL-8105BG / TRSL-8105AG
(RoHS Compliant)
3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gb/s Bi-directional Data Links
l Duplex LC Single Mode Transceiver
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
l Small Form Factor, RJ-45 size, 2×5 pin Package
l 1310 nm LD Transmitter
The TRSL-8105G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Gigabit
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A
LVPECL logic interface simplifies interface to external
circuitry.
l Up to 10km at 1.063/2.125 Gb/s, 5 km at 4.25Gb/s
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation: TRSL-8105G
l -10 to 85oC Operation: TRSL-8105BG
l -40 to 85oC Operation: TRSL-8105AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Gigabit Ethernet
ORDER INFORMATION
Bit Rate
(Gb/s)
Distance Wavelengt
Temp. TX Power RX Sens.
RoHS
P/No.
FC-PI
Package
(km)
5/10*
5/10*
5/10*
h (nm)
(oC)
(dBm)
(dBm) Compliant
TRSL-8105G
TRSL-8105BG
TRSL-8105AG
4 / 2 / 1 400/200/100
4 / 2 / 1 400/200/100
4 / 2 / 1 400/200/100
1310
2×5 LC
0 to 70
-3 to -8
-18
-18
-18
Yes
Yes
Yes
1310
2×5 LC -10 to 85 -3 to -8
2×5 LC -40 to 85 -3 to -8
1310
*: 10km at 1.063/2.125/1.25 Gb/s and 5 km at 4.25Gb/s.
Absolute Maximum Ratings
Parameter
Storage Temperature
Symbol
Tstg
Min
-40
0
-10
-40
Max
85
70
85
85
Units
Notes
oC
TRSL-8105G
TRSL-8105BG
TRSL-8105AG
Operating Temperature
Topr
oC
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
oC
V
10 seconds on leads only
0
GND
0
Vcc
30
V
Output Current
Iout
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
oC / TRSL-8105G
oC / TRSL-8105BG
oC / TRSL-8105AG
air flow 1m/sec
Gb/s
0
-10
-40
70
85
85
Operating Temperature
Topr
Icc
Data Rate
Power Supply Current
1
4.25
200
250
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
2
Optoway
TRSL-8105G
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Optical Modulation Amplitude
@4.25 Gb/s
Po
-8
---
-3
dBm
1
OMA
290
mW
Output Center Wavelength
Output Spectrum Width
Optical Rise Time
1274
---
1310
2
1360
nm
nm
l
Dl
RMS (σ)
tr / tf
RIN
90
ps
20% to 80% Values
Relative Intensity Noise
Electrical
-118
dB/Hz
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
IIL
-350
mA
mA
mV
V
IIH
350
VIH - VIL
VIL - VCC
VIH - VCC
VTDIS,L
VTDIS,H
tDIS
300
-2.0
-1.1
-1.58
-0.74
0.5
2
2
V
0
V
TX Output Enabled
TX Ouput Disabled
Vcc – 1.3
Vcc
1
V
ms
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
29
-18
---
mW
dBm
dBm
dBm
dBm
dB
3
4
Sensitivity @ 4.25 Gb/s
Sen1
---
---
Maximum Input Power
Pin
Pa
0
---
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
---
---
---
---
-18
---
Transition: low to high
Transition: high to low
Pd
-31
1.0
1260
1600
nm
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
VOL - VCC
VOH - VCC
VOL
-2.0
-1.1
-1.58
-0.74
0.5
V
V
V
V
5
5
VOH
2.0
3. Measured at PRBS 27-1 at BERT 1E-12.
4. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29 mW is
approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB.
5. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
3
Optoway
TRSL-8105G
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
5 4 3 2 1
6 7 8 9 10
MS
MS
TOP VIEW
PIN
1
2
Symbol
VEERX
VCC RX
SD
Notes
Directly connect this pin to the receiver ground plane
+3.3V dc power for the receiver section
3
Active high on this indicates a received optical signal.
Receiver Dataout Bar. See recommended circuit schematic
Receiver Dataout. See recommended circuit schematic
+3.3V dc power for the transmitter section
Directly connect this plan to the transmitter ground plane
Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module
To enable module connect to TTL logic low “0”
4
5
RD-
RD+
6
7
VCC TX
VEETX
8
TX_Disable
9
TD+
TD-
MS
Transmitter Data In. See recommended circuit schematic
Transmitter Data In Bar. See recommended circuit schematic
Mounting Studs. Connect to Chassis Ground
10
MS
RECOMMENDED CIRCUIT SCHEMATIC
7
VeeTX
8
TX_Disable
TX_Disable
TD+ 9
TD+
TD-
LD
Driver
Z=50Ω
100Ω
TD- 10
6
Z=50Ω
1μH
10μF
VCC 3.3V
VccTX
10nF
10μF
10nF
10nF
1μH
SerDes
IC
2
4
Protocol
IC
VccRX
RD-
10μF
RD-
Z=50Ω
Z=50Ω
100Ω
RD+ 5
POST
Amp
RD-
Depending on SerDes
SD
3
1
Signal Detect
4.7K to 10KΩ
VeeRX
SFF Module
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
4
Optoway
TRSL-8105G
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM (Units in mm)
A) Standard Case
TRSL-8105G / TRSL-8105BG / TRSL-8105AG
B) Extended Case
TRSL-8105EG / TRSL-8105BEG / TRSL-8105AEG
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
相关型号:
©2020 ICPDF网 联系我们和版权申明