IMC-P111FX-SS-SC-HV_JP [ORING]
Fiber media converter;
| 型号： | IMC-P111FX-SS-SC-HV_JP |
| 厂家： | 
ORING |
| 描述： | Fiber media converter |
| 文件： | 总5页 (文件大小：706K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Designed for Rugged Excellence
IMC-P111FX / IMC-P111P Series
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/
100Base-T(X) to 1x100Base-FX fiber or 1x100Base-FX SFP socket
Features
¾
¾
¾
Designed for Railway application and fully compliant with the
requirement of IEC 61850-3 and IEEE 1613
Leading EN50155-compliant Ethernet switch for rolling stock
application
Supports 1 port 10/100Base-T(X) auto-negotiation and
auto-MDI/MDI-X
¾
¾
¾
¾
¾
¾
¾
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Supports relay output for power failed alarm
Provided DIP-Switch to setting function
High reliability and rigid IP-30 housing
¾ DIN-Rail and wall mounting enabled
Introduction
IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface;
it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation
application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111
series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide
operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh
operating environments.
IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other
side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the
DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the
other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series
is reliable media converter and can satisfy most demand of power substation and rolling stock application.
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Dimension
IMC-P111-LV Series
* All specifications are subject to change without notice.
Designed for Rugged Excellence
IMC-P111-HV Series
Specifications
ORing Media Converter
Model
IMC-P111FX-MM
IMC-P111FX-SS
IMC-P111P
Physical Ports
10/100 Base-T(X) Port in RJ45
Auto MDI/MDIX
1
1
1
Fiber Ports Number
Fiber Ports Standard
Fiber Mode
1
1
-
-
-
100Base-FX
Multi-mode
62.5/125 µm
50/125 µm
SC
100Base-FX
Single-mode
Fiber Diameter (µm)
9/125 µm
-
Fiber Optical Connector
Typical Distance (Km)
Wavelength (nm)
SC
-
-
-
-
-
2 Km
30 Km
1310 nm
-14 dbm
-23.5 dbm
1310 nm
-8 dbm
-15 dbm
Max. Output Optical Power (dbm)
Min. Output Optical Power (dbm)
Max. Input Optical Power
(Saturation)
0 dbm
0 dbm
-
Min. Input Optical Power
(Sensitivity)
-31 dbm
7.5 db
-34 dbm
19 db
-
-
Link Budget (db)
100Base-FX SFP port
-
-
1
Technology
IEEE 802.3 for 10Base-T
Ethernet Standards
Processing
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control
Store-and-Forward
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
DIP-Switch setting
Alarm DIP-Switch
DIP-Switch 1
Power-1 failed warning : (ON) enable, (OFF) disable
Power-2 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2
LED indicators
Power indicator
Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
10/100Base-T(X) RJ45 port indicator
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
100Base-FX fiber port indicator
Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Amber LED – (ON) LFP function fail / (OFF) LFP function disable
LFP statue indicator
Fault indicator
Amber : Indicate unexpected event occurred
Duplex indicator
Power
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LV Model Input Power
HV Model Input Power
Triple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack
Dual 100~240VAC power inputs on 8-pin terminal block
LV model : 12 Watts,
HV model 100VAC/4.8Watts,
LV model : 12 Watts
HV model 100VAC/4.8Watts,
240VAC/5.8Watts)
LV model : 12 Watts
HV model 100VAC/4.8Watts,
240VAC/5.8Watts)
Power consumption (Typ.)
:
:
:
240VAC/5.8Watts)
Present
Overload current protection
Reverse polarity protection
Physical Characteristic
Enclosure
Present on terminal block
IP-30
Dimension (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
LV model : 660 g
HV model : 802 g
LV model : 650g
HV model : 792 g
Weight (g)
Environmental
Storage Temperature
Operating Temperature
Operating Humidity
Regulatory approvals
Power Automation
EMI
-40 to 85oC (-40 to 185oF)
-40 to 85oC (-40 to 185oF)
5% to 95% Non-condensing
IEC 61850-3, IEEE 1613
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
EMS
Shock
IEC60068-2-27
IEC60068-2-32
IEC60068-2-6
EN60950-1
Free Fall
Vibration
Safety
Warranty
5 years
Ordering Information
IMC-P1ABCC-DD-EE
Code
10/100Base-T(X) 100Base-FX Fiber
Fiber Port Type
Fiber Optical Mode
Fiber Optical Connector
Definition Port Number
Port Number
- FX: 100Base-FX fiber
- P: 100Base-FX SFP
- MM: Multi-mode
- SS: Single-mode
Option
- 1: 1 ports
- 1: 1 port
- SC: SC connector
Model Name
Description
Available
Model
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, low-voltage power inputs
IMC-P111FX-MM-SC-LV
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, US
power cord
IMC-P111FX-SS-SC-LV
IMC-P111FX-MM-SC-HV_US
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, US
power cord
IMC-P111FX-SS-SC-HV_US
IMC-P111FX-MM-SC-HV_UK
IMC-P111FX-SS-SC-HV_UK
IMC-P111FX-MM-SC-HV_EU
IMC-P111FX-SS-SC-HV_EU
IMC-P111FX-MM-SC-HV_JP
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, UK
power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, UK
power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, EU
power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, EU
power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, JP
power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, JP
power cord
IMC-P111FX-SS-SC-HV_JP
IMC-P111P-LV
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, SFP socket, low-voltage power inputs
IMC-P111P-HV_US
(Preliminary)
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, SFP socket, high-voltage power inputs, US power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, SFP socket, high-voltage power inputs, UK power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, SFP socket, high-voltage power inputs, EU power cord
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and
1x100Base-FX, SFP socket, high-voltage power inputs, JP power cord
IMC-P111P-HV_UK
(Preliminary)
IMC-P111P-HV_EU
(Preliminary)
IMC-P111P-HV_JP
(Preliminary)
Packing List
z
Quick Installation Guide x 1
z
Din-Rail Kit x 1
z
IMC-P111FX/P111P x 1
z
Wall-Mount Kit x 1
Optional Accessories
z
SFP100 series : 100Mbps SFP optical transceiver
DR-75 series : 75 Watts power supply
z
z
DR-45 series : 45 Watts power supply
DR-120 series : 120 Watts power supply
z
* All specifications are subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明