LCWCP7P.PC [OSRAM]
SMD ceramic package with silicon resin with lens;型号: | LCWCP7P.PC |
厂家: | OSRAM GMBH |
描述: | SMD ceramic package with silicon resin with lens |
文件: | 总19页 (文件大小:459K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OSLON SSL
Ceramic package - 80° radiation pattern
Lead (Pb) Free Product - RoHS Compliant
LCW CP7P.PC
Released
Besondere Merkmale
Features
•
•
•
Gehäusetyp: SMD-Keramikgehäuse mit
•
•
•
package: SMD ceramic package with silicon
Silikonverguss und Linse
resin with lens
Typischer Lichtstrom: 101 lm bei 350 mA und
bis zu 175 lm bei 700 mA (4500 K)
Besonderheit des Bauteils: Kompakte
Lichtquelle für platzsparende Designs
Farbtemperatur: 4000 K bis 5000 K
Farbwiedergabeindex: 70 (typ.)
Abstrahlwinkel: 80°
typical Luminous Flux: 101 lm at 350 mA and
up to 175 lm at 700 mA (4500 K)
feature of the device: small size high-flux LED
for slim designs
•
•
•
•
•
•
•
•
color temperature: 4000 K to 5000 K
color reproduction index: 70 (typ.)
viewing angle: 80°
typical optical efficiency: 90 lm/W at 350 mA
(4500 K)
Typischer optischer Wirkungsgrad: 90 lm/W
bei 350 mA (4500 K)
•
Gruppierungsparameter: Lichtstrom, Farbort,
•
grouping parameter: luminous flux,
color coordinates, forward voltage
soldering methods: reflow soldering
preconditioning: acc. to JEDEC Level 2
taping: 12-mm tape with 600/reel, ø180 mm
ESD-withstand voltage: up to 8 kV acc. to
JESD22-A114-D
Durchlassspannung
•
•
•
•
Lötmethode: Reflow-Löten
•
•
•
•
Vorbehandlung: nach JEDEC Level 2
Gurtung: 12-mm Gurt mit 600/Rolle, ø180 mm
ESD-Festigkeit: ESD-sicher bis 8 kV nach
JESD22-A114-D
•
Erweiterte Korrosionsfestigkeit:
Details siehe Seite 12
•
Superior Corrosion Robustness:
details see page 12
Anwendungen
Applications
•
•
•
•
•
Allgemeine Außenbeleuchtung
Straßenbeleuchtung
Tunnelbeleuchtung
Industrielle Beleuchtung
Gebäudebeleuchtung: Fassadenbeleuchtung,
Treppenbeleuchtung
Spezialbeleuchtung: Blitzlicht,
•
•
•
•
•
outdoor lighting
street lighting
tunnel lighting
industrial lighting
architectural lighting: facade lighting, stairway
lighting
specialty lighting: flashlight, bicycle headlamps,
•
•
Fahrradbeleuchtung, Sicherheitsbeleuchtung
security lights
2011-03-23
1
Released
LCW CP7P.PC
Bestellinformation
Ordering Information
Typ
Farb-
temperatur
Lichtstrom
Lichtstärke
Bestellnummer
Ordering Code
1) Seite 19
2) Seite 19
Type
color
Luminous
Luminous
temperature Flux1) page 19
Intensity
2) page 19
IF = 350 mA
ΦV(lm)
IF = 350 mA
IV (cd)
LCW CP7P.PC-KSKU-5L7N-35 4000 K
LCW CP7P.PC-KTLP-5L7N-35
89.2 ... 112.0
97.0 ... 121.0
50 (typ.)
54 (typ.)
Q65111A0818
Q65111A0819
LCW CP7P.PC-KULQ-5J7K-35 4500 K
LCW CP7P.PC-KTLP-5J7K-35
104.2 ... 130.0 58 (typ.)
97.0 ... 121.0 54 (typ.)
on request
Q65111A0820
LCW CP7P.PC-KULQ-5H7I-35 5000 K
LCW CP7P.PC-KTLP-5H7I-35
104.2 ... 130.0 58 (typ.)
97.0 ... 121.0 54 (typ.)
on request
Q65111A0821
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 7 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LCW CP7P.PC-KSKU-5L7N-35 bedeutet, dass auf dem Gurt nur eine der
Helligkeitsgruppen KS, KT oder KU enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine
Farbortgruppe geliefert. Z.B.: LCW CP7P.PC-KSKU-5L7N-35 bedeutet, dass auf dem Gurt nur eine der
Farbortgruppen -5L bis -7N enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.
Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro
Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LCW CP7P.PC-KSKU-5L7N-35 bedeutet, dass
nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3, -4
oder -5 enthalten (siehe Seite 7 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Durchlassspannungsgruppen nicht direkt bestellt
werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each
reel). E.g.LCW CP7P.PC-KSKU-5L7N-35 means that only one group KS, KT or KU will be shippable for any
one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where chromaticity coordinate groups are measured and binned, single
chromaticity coordinate groups will be shipped on any one reel. E.g. LCW CP7P.PC-KSKU-5L7N-35 means
that only 1 chromaticity coordinate group -5L to -7N will be shippable (see page 5 for explanation).
In order to ensure availability, single chromaticity coordinate groups will not be orderable.
In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage
groups will be shipped on any one reel. E.g. LCW CP7P.PC-KSKU-5L7N-35 means that only 1 forward voltage
group -3, -4 or -5 will be shippable. In order to ensure availability, single forward voltage groups will not be
orderable(see page 7 for explanation).
2011-03-23
2
Released
LCW CP7P.PC
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Betriebstemperatur
Operating temperature range
Top
Tstg
Tj
– 40 … + 110
– 40 … + 110
125
°C
°C
°C
Lagertemperatur
Storage temperature range
Sperrschichttemperatur
Junction temperature
Durchlassstrom
Forward current
(TS=25°C)
(min.) IF
(max.) IF
100
800
mA
mA
Stoßstrom
IFM
2000
mA
Surge current
t ≤ 50 ms, D = 0.016, TS=25°C
Sperrspannung
Reverse voltage
(TS=25°C)
VR
not designed for
reverse operation
V
2011-03-23
3
Released
LCW CP7P.PC
Kennwerte
Characteristics
(TS = 25 °C)
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Farbkoordinate x nach CIE 19313) Seite 19
(typ.)
x
0.37
0.37
4000
–
Chromaticity coordinate x acc. to CIE 19313) page 19
IF = 350 mA
Farbkoordinate y nach CIE 19313) Seite 19
(typ.)
y
–
Chromaticity coordinate y acc. to CIE 19313) page 19
IF = 350 mA
Farbtemperatur 2) Seite 19)
Color temperature 2) page 19
IF = 350 mA
(min.)
T
T
K
K
(max.)
5000
80
Abstrahlwinkel bei 50 % ΙV (Vollwinkel)
Viewing angle at 50 % ΙV
(typ.) 2ϕ
Grad
deg.
Durchlassspannung 4) Seite 19)
Forward voltage4) page 19
IF = 350 mA
(min.) VF
(typ.) VF
(max.) VF
2.75
3.2
3.5
V
V
V
Sperrstrom
Reverse current
not designed for
reverse operation
(max.) IR
μA
Wärmewiderstand
Thermal resistance
Sperrschicht/Lötpad
Junction/solder point
(typ.)
(max.) Rth JS
Rth JS
7
9.4*
K/W
K/W
*Rth(max) basiert auf statistischen Werten
Rth(max) is based on statistic values
2011-03-23
4
Released
LCW CP7P.PC
Farbortgruppen3) Seite 20
Chromaticity Coordinate Groups3) page 20
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
Cy
0.9
520
530
4000 K
8
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Cy
540
510
7
4500 K
550
560
6
5000 K
570
5
4
500
580
590
600
610
620
630
8
E
7
6
N
M
490
L
K
J
5
4
480
470
460
450
I
H
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Cx
Cx
OHA04564
Farbtemperatur 4000 K
Color temperature 4000 K
Gruppe
Group
Cx
Cy
Gruppe
Group
Cx
Cy
Gruppe
Group
Cx
Cy
5L
6L
7L
0.367
0.369
0.377
0.375
0.369
0.371
0.380
0.377
0.371
0.374
0.383
0.380
0.358
0.368
0.373
0.362
0.368
0.378
0.383
0.373
0.378
0.387
0.393
0.383
5M
6M
7M
0.375
0.377
0.385
0.382
0.377
0.380
0.388
0.385
0.380
0.383
0.392
0.388
0.362
0.373
0.378
0.367
0.373
0.383
0.388
0.376
0.383
0.393
0.399
0.388
5N
6N
7N
0.382
0.385
0.393
0.390
0.385
0.388
0.397
0.393
0.388
0.392
0.401
0.397
0.367
0.376
0.383
0.372
0.378
0.388
0.393
0.383
0.388
0.399
0.404
0.393
2011-03-23
5
Released
LCW CP7P.PC
Farbtemperatur 4500 K
Color temperature 4500 K
Gruppe
Group
Cx
Cy
Gruppe
Group
Cx
Cy
5J
6J
7J
0.351
0.352
0.361
0.359
0.352
0.354
0.363
0.361
0.354
0.355
0.364
0.363
0.347
0.356
0.362
0.352
0.356
0.365
0.371
0.362
0.365
0.374
0.381
0.371
5K
6K
7K
0.359
0.361
0.369
0.367
0.361
0.363
0.371
0.369
0.363
0.364
0.374
0.371
0.352
0.362
0.368
0.358
0.362
0.371
0.378
0.368
0.371
0.381
0.387
0.378
Farbtemperatur 5000 K
Color temperature 5000 K
Gruppe
Group
Cx
Cy
Gruppe
Group
Cx
Cy
5H
6H
7H
8H
0.337
0.337
0.345
0.344
0.337
0.337
0.346
0.345
0.337
0.338
0.346
0.346
0.338
0.338
0.347
0.346
0.337
0.345
0.352
0.343
0.345
0.353
0.360
0.352
0.353
0.362
0.369
0.360
0.362
0.370
0.378
0.369
5I
6I
/I
0.344
0.345
0.353
0.352
0.345
0.346
0.354
0.353
0.346
0.346
0.355
0.354
0.346
0.347
0.356
0.355
0.343
0.352
0.358
0.349
0.352
0.360
0.367
0.358
0.360
0.369
0.376
0.367
0.369
0.378
0.385
0.376
8I
2011-03-23
6
Released
LCW CP7P.PC
Durchlassspannungsgruppen6) Seite 18
Forward Voltage Groups6) page 18
Gruppe
Group
Durchlassspannung
Forward voltage
Einheit
Unit
min.
max.
3.0
3
4
5
2.75
3.0
V
V
V
3.25
3.5
3.25
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group
Lichtstrom1) Seite 19
Lichtstärke2) Seite 19
Luminous Intensity2) page 19
IV (cd)
Luminous Flux1) page 19
ΦV (lm)
KS
KT
KU
LP
LQ
89.2 ... 97.0
97.0 ... 104.2
104.2 ... 112.0
112.0 ... 121.0
121.0 ... 130.0
46.0 (typ.)
50.0 (typ.)
54.0 (typ.)
58.0 (typ.)
62.0 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus nur
wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of only a few individual
brightness groups. Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: KS-5L-3
Example: KS-5L-3
Helligkeitsgruppe
Brightness Group
Farbortgruppe
Chromaticity Coordinate Forward Voltage
Group
Durchlassspannung
KS
5L
3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten.
Note: No packing unit / tape ever contains more than one brightness group.
2011-03-23
7
Released
LCW CP7P.PC
Relative spektrale Emission2) Seite 19
Relative Spectral Emission2) page 19
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Φ
rel = f (λ); TS = 25 °C; IF = 350 mA
OHL04590
100
%
Φ
rel
80
60
40
20
Vλ
0
400
500
600
700
nm 800
λ
Abstrahlcharakteristik2) Seite 19
Radiation Characteristic2) page 19
Ιrel = f (ϕ); TS = 25 °C
40˚
30˚
20˚
10˚
0˚
OHL04325
1.0
50˚
0.8
0.6
0.4
60˚
70˚
0.2
0
80˚
90˚
100˚
1.0
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
120˚
2011-03-23
8
Released
LCW CP7P.PC
Durchlassstrom2) Seite 19
Forward Current2) page 19
IF = f (VF); TS = 25 °C
Relativer Lichtstrom2) Seite 19
Relative Luminous Flux2) page 19
ΦV/ΦV(350 mA) = f (IF); TS = 25 °C
OHL04596
OHL04597
800
2.5
mA
ΦV
V (350 mA)
IF
Φ
2.0
600
400
200
1.5
1.0
0.5
0
200
400
600 mA 800
2.8
3.0
3.2
3.4
3.6 V 3.8
VF
IF
Farbortverschiebung2) Seite 17
Chromaticity Coordinate Shift2) page 17
x, y = f (IF); TS = 25 °C
OHL04598
0.015
Cx, Cy
0.010
0.005
0
Cy
Cx
-0.005
-0.010
-0.015
200
400
600 mA 800
IF
2011-03-23
9
Released
LCW CP7P.PC
Relative Vorwärtsspannung2) Seite 17
Relative Forward Voltage2) page 17
Relativer Lichtstrom2) Seite 19
Relative Luminous Flux2) page 19
ΔVF = VF - VF(25 °C) = f (Tj); IF = 350 mA
ΦV/ΦV(25 °C) = f (Tj); IF = 350 mA
OHL04593
OHL04428
1.2
0.3
V
ΦV
V (25 ˚C)
ΔVF
Φ
0.2
0.1
0
0.8
0.6
0.4
0.2
0
-0.1
-0.2
-0.3
-40 -20
0
20 40 60 80 ˚C 120
-40 -20
0
20 40 60 80 ˚C 120
T
Tj
j
Farbortverschiebung2) Seite 19
Chromaticity Coordinate Shift2) page 19
x, y = f (Tj); IF = 350 mA
OHL04594
0.03
ΔCx, ΔCy
0.02
0.01
0
Cx
Cy
-0.01
-0.02
-0.03
-40 -20
0
20 40 60 80 ˚C 120
T
j
2011-03-23
10
Released
LCW CP7P.PC
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
IF = f (TS)
OHL04652
1200
mA
IF
800
600
400
200
0
Do not use current below 100 mA
0
20 40 60 80 100 ˚C 140
TS
Zulässige Impulsbelastbarkeit IF = f (tp)
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 25 °C
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 85 °C
OHL04611
OHL04611
2.2
A
2.2
A
tP
tP
tP
tP
IF
IF
IF
IF
D
= T
D
= T
T
T
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
D
=
D
=
0.005
0.01
0.02
0.05
0.1
0.005
0.01
0.02
0.05
0.1
0.5
1
0.5
1
0.2
0.2
10-5 10-4 10-3 10-2 10-1 100 101 s 102
10-5 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2011-03-23
11
Released
LCW CP7P.PC
Maßzeichnung5) Seite 19
Package Outlines5) page 19
Anm.: Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschalten ist.
Note: LED is protected by ESD device which is connected in parallel to LED-Chip.
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet
Note: Package not suitalbe for ultra sonic cleaning
Kathodenkennung:
Cathode mark:
Gewicht / Approx. weight:
Markierung
mark
2.5 mg
Korrosionsfestigkeit besser als EN 60068-2-60 (method 4):
mit erweitertem Korrosionstest: 40°C / 90%rh / 15ppm H2S / 336 h
Corrosion robustness better than EN 60068-2-60 (method 4):
with enhanced corrosion test: 40°C / 90%rh / 15ppm H2S / 336 h
2011-03-23
12
Released
LCW CP7P.PC
Gurtung / Polarität und Lage5) Seite 19
Verpackungseinheit 600/Rolle, ø180 mm
Method of Taping / Polarity and Orientation5) page 19 Packing unit 600/reel, ø180 mm
2011-03-23
13
Released
LCW CP7P.PC
Empfohlenes Lötpaddesign5) Seite 19
Recommended Solder Pad5) page 19
Reflow Löten
Reflow Soldering
Anm.: Weitere Informationen finden Sie in der Applikationsschrift „Handling and Processing Details for
Ceramic LEDs“
Note: For further information please refer to our Application Note „Handling and Processing Details for
Ceramic LEDs“
2011-03-23
14
Released
LCW CP7P.PC
Lötbedingungen
Vorbehandlung nach JEDEC Level 2
Soldering Conditions
Preconditioning acc. to JEDEC Level 2
Reflow Lötprofil für bleifreies Löten
Reflow Soldering Profile for lead free soldering
(nach J-STD-020D.01)
(acc. to J-STD-020D.01)
OHA04525
300
˚C
T
250
T
245 ˚C
p
240 ˚C
tP
tL
217 ˚C
200
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s
300
t
Pb-Free (SnAgCu) Assembly
Max. Ratings
Profile Feature
Recommendation
Ramp-up Rate to Preheat*)
25°C to 150°C
2 °C / s
3 °C / s
Time ts from TSmin to TSmax
(150°C to 200°C
Ramp-up Rate to Peak*)
180°C to TP
100 s
min. 60 s max. 120 s
3 °C / s
2 °C / s
Liquidus Temperature TL
Time tL above TL
217°C
80 s
max. 100 s
Peak Temperature TP
245 °C
20 s
max. 260 °C
Time tP within 5°C of the specified
peak temperature TP - 5K
min. 10 s max. 30 s
Ramp-down Rate*
TP to 100°C
3 K / s
6 K / s maximum
Time 25°C to Peak temperature
max. 8 min.
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation ΔT/Δt: Δt max. 5 sec; fulfillment for the whole T-range
2011-03-23
15
Released
LCW CP7P.PC
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
OSRAM Opto
Semiconductors
BIN1: EA-5O-0-140-D
LMW CNAP
OSLON
RoHS Compliant
(6P) BATCH NO: 1004067407
ML Temp ST
2
260 ˚C
R
(1T) LOT NO: 1234567890
(9D) D/C: 1013
Pack: R18
DEMY
022
B_R999_1880.1642 R
(X) PROD NO: 11058300 (Q)QTY: 2000 (G) GROUP: EA-5O-0-D
OHA04563
Gurtverpackung
Tape and Reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Gurtvorlauf: 400 mm
Leader:
Gurtende: 160 mm
Trailer: 160 mm
400 mm
OHAY0324
Tape dimensions in mm (inch)
W
P0
P1
P2
2 ± 0.05
D0
1.5 + 0.1
E
F
4 ± 0.1
8 ± 0.1
1.75 ± 0.1
5.5 ± 0.05
+ 0.3
– 0.1
12
(0.157 ± 0.004) (0.315 ± 0.004) (0.079 ± 0.002) (0.059 + 0.004) (0.069 ± 0.004) (0.217 ± 0.002)
Reel dimensions in mm (inch)
A
W
Nmin
W1
W2 max
180 (7)
8 (0.315)
60 (2.362)
8.4 + 2 (0.331 + 0.079)
14.4 (0.567)
2011-03-23
16
Released
LCW CP7P.PC
Trockenverpackung und Materialien
Dry Packing Process and Materials
Moisture-sensitive label or print
Barcode label
OSRAM
Humidity indicator
Barcode label
D o n o t e a t .
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l l a d d r y .
I f w e t ,
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
OSRAM
Desiccant
OHA00539
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-sensitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
Barcode label
Barcode label
20
0
-
1-
Q
-2
1
:
P
-1
T
S
R
in
2:
B
in
:
p
m
B
i
n3
C
Y
M
6
B
e
R
7
T
2
0
C
T
R
E
D
6
D
L
2
0
2
T
X
T
E
M
C
6
l
T
E
Y
2
24
0
S
P
2a
8
1
L
O
na
77
T
3
io
: R
-
1
Q
ti
d
dit
A
R
+
-
1
l
A
u
0
V
M
R
C
K
: P
P
A
P
U
O
R
G
)
(G
4
4
: 01
/C
o
8
pt rs
cto
D
D)
(9
O
M
o
du
A
R
ic
n
: 21002199
00
0
2
4
S
O
S
NO
23
:
em
H
H
1
TY
)Q
TC
A
G
(Q
)
B
23
: 1
P
(6
O
N
2
5
T
4
1
L
O
0
T
)
1
0
(1
1
:
O
N
D
O
R
P
)
(X
20
0
-
1-
Q
-2
1
:
P
-1
T
S
R
in
2:
B
in
:
p
m
B
i
n3
C
Y
M
6
B
e
R
7
T
2
0
C
T
R
E
D
6
D
L
2
0
2
T
X
T
E
M
C
Y
2
24
6
0
E
l
T
S
P
a
8
1
L
O
2
na
T
3
tio
: R
-
1
Q
di
R
l
ti
A
d
A
+
-
1
u
0
77
K
V
M
R
C
: P
P
A
P
U
O
R
G
)
(G
4
4
: 01
8
9
rs
9
/C
Op
d
c
t
t
o
2
1
D
D)
(9
u
00
n
: 2
1
0
0
0
RAM
o
OSem
S
4
ic
NO
3
:
2
2
Y
T
)Q
H
1
TC
H
A
G
3
(Q
B
)
2
: 1
P
(6
O
N
25
4
1
T
L
O
0
)
0
T
1
(1
1
:
O
N
D
O
OSRAM
R
P
)
(X
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm (inch)
Breite / Width
Länge / length
200 5 (7,874 0,1968)
Höhe / height
30 5 (1,1811 0,1968)
200 5 (7,874 0,1968)
2011-03-23
17
Released
LCW CP7P.PC
Revision History:
Previous Version:
2011-03-23
2010-11-04
Page
all
9
Subjects (major changes since last revision)
Preliminary data sheet created
Date of change
2010-10-27
2010-11-04
2011-01-18
2011-03-23
Diagrams corrected (forward current max. 800 mA)
Ordering codes added
2
all
Final datasheet created
Patent List
Patent No.
US 6 066 861
US 6 277 301
US 6 245 259
Wegen der Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augensicherheit nach dem Standard IEC 62471:2006
("photobiological safety of lamps and lamp systems")
Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LED die "exempt"- Gruppe (die die sich im
"sichtbaren" Spektralbereich auf eine Expositionsdauer von 10000 s bezieht). Unter realen Umständen (für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial
besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, können temporär eingeschränktes Sehvermögen und
Nachbilder je nach Situation zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen.
Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard IEC 62471:2006
("photobiological safety of lamps and lamp systems").
Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "exempt" group (relating to devices in the
visible spectrum with an exposure time of 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is
assumed that no endangerment to the eye exists from these devices.
As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their
blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages
can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For
information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take
packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are
not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components6) page 19 may
only be used in life-support devices or systems7) page 19 with the express written approval of OSRAM OS.
2011-03-23
18
Released
LCW CP7P.PC
Fußnoten:
Remarks:
1)
1)
Helligkeitswerte werden während eines Strompulses
Brightness values are measured during a current
pulse of typical 25 ms, with an internal reproducibility
of +/- 8 % and an expanded uncertainty of +/- 11 %
(acc. to GUM with a coverage factor of k = 3).
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 8 % und einer erweiterten
Messunsicherheit von +/- 11 % gemessen (gemäß
GUM mit Erweiterungsfaktor k = 3).
2)
2)
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden diese
typischen Werte ohne weitere Ankündigung geändert.
Farbkoordinaten werden während eines Strompulses
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 0,005 und einer
erweiterten Messunsicherheit von +/- 0,01 gemessen
(gemäß GUM mit Erweiterungsfaktor k = 3).
Due to the special conditions of the manufacturing
processes of LED, the typical data or calculated
correlations of technical parameters can only reflect
statistical figures. These do not necessarily
correspond to the actual parameters of each single
product, which could differ from the typical data and
calculated correlations or the typical characteristic
line. If requested, e.g. because of technical
improvements, these typ. data will be changed without
any further notice.
3)
4)
3)
4)
Chromaticity coordinates are measured during
current pulse of typical 25 ms, with an internal
reproducibility of +/- 0,005 and an expanded
a
uncertainty of +/- 0,01 (acc. to GUM with a coverage
factor of k = 3).
The forward voltage is measured during a current
pulse of typical 8 ms, with an internal reproducibility of
+/- 0,05 V and an expanded uncertainty of +/- 0,1 V
(acc. to GUM with a coverage factor of k=3).
Vorwärtsspannungen
werden
während
eines
Strompulses einer typischen Dauer von 8 ms, mit
einer internen Reproduzierbarkeit von +/- 0,05 V und
einer erweiterten Messunsicherheit von +/- 0,1 V
gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
Maße werden wie folgt angegeben: mm (inch)
Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden Apparaten oder Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
5)
6)
5)
6)
Dimensions are specified as follows: mm (inch).
A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
7)
7)
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstrasse 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
2011-03-23
19
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明