Q65111A4685 [OSRAM]
Indoor General Lighting;型号: | Q65111A4685 |
厂家: | OSRAM GMBH |
描述: | Indoor General Lighting |
文件: | 总19页 (文件大小:565K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2014-01-28
SOLERIQ® S 19
Datasheet
Draft Version 0.0
GW KAHLB1.EM
The SOLERIQ® S products were specifically designed
for applications requiring large flux packages out of a
compact area.
Die SOLERIQ® S Produkte wurden speziell für
Anwendungen entwickelt, die großen Lichtstrom aus
einer kompakten Fläche benötigen.
Features:
Besondere Merkmale:
• Package: Chip-on-Board
• Viewing angle at 50 % IV: 120°
• Color: 2700 K - 4000 K ( white )
• CRI: min. 80 ( typ. 82 )
• Gehäusetyp: Chip-on-Board
• Abstrahlwinkel bei 50 % IV: 120°
• Farbe: 2700 K - 4000 K ( weiß )
• CRI: min. 80 ( typ. 82 )
• Luminous Flux: typ. 3950 lm @ 4000 K, 85 °C
• Luminous efficacy: typ. 121 lm/W @ 4000 K,
85 °C
• Lichtstrom: typ. 3950 lm @ 4000 K, 85 °C
• Lichtausbeute: typ. 121 lm/W @ 4000 K, 85 °C
Applications
Anwendungen
•
•
Spot lights
•
•
Spot-Leuchten
Indoor General Lighting
Innen-Allgemeinbeleuchtung
2014-01-28
1
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Ordering Information
Bestellinformation
Type:
Color
Luminous Flux
Ordering Code
Bestellnummer
1) page 17
Temperature
Typ:
Farbtemperatur Lichtstrom
1) Seite 17
IF = 700 mA,
TS = 85 °C
[K]
ΦV [lm]
GW KAHLB1.EM-TQTS-27S3
GW KAHLB1.EM-TQTT-30S3
GW KAHLB1.EM-TRTT-35S3
GW KAHLB1.EM-TRTU-40S3
2700
3000
3500
4000
3040 ... 3900
3040 ... 4190
3300 ... 4190
3300 ... 4500
Q65111A4687
Q65111A4686
Q65111A4685
Q65111A4684
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page ). Only one group will be shipped on each
packing unit (there will be no mixing of two groups on each packing unit). E. g. GW KAHLB1.EM-TRTT-35S3 means that only one group TRTT will be
shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.
Anm.:
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite ). Es
wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GW KAHLB1.EM-TRTT-35S3 bedeutet, dass in einer
Verpackungseinheit nur eine der Helligkeitsgruppen TRTT enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen
nicht bestellt werden.
2014-01-28
2
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Maximum Ratings
Grenzwerte
Parameter
Symbol
Symbol
Top
Values
Werte
Unit
Bezeichnung
Einheit
°C
Operating temperature range
Betriebstemperatur
-30 ... 85
Storage temperature range
Lagertemperatur
Tstg
Tj
-40 ... 100
125
°C
Junction temperature
Sperrschichttemperatur
°C
Forward current
Durchlassstrom
(TS = 85 °C)
IF
1000
mA
Surge current
IFM
1200
mA
Stoßstrom
(t <= 10 μs; D = 0.005; TS = 85 °C)
Reverse current
Sperrstrom
IR
20
2
mA
kV
ESD withstand voltage
ESD Festigkeit
(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class
2)
VESD
2014-01-28
3
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Characteristics (TS = 85 °C; IF = 700 mA)
Kennwerte
Parameter
Symbol
Symbol
2ϕ
Values
Werte
120
Unit
Einheit
°
Bezeichnung
Viewing angle at 50 % IV
Abstrahlwinkel bei 50 % IV
(typ.)
Forward voltage 2) page 17
(min.)
(typ.)
(max.)
VF
VF
VF
42.0
46.5
50.0
V
V
V
Durchlassspannung 2) Seite 17
Reverse voltage
Sperrspannung
(IR = 20 mA)
(max.)
VR
1.2
V
Color reproduction index 3) page 17
(typ.)
(min.)
Ra
Ra
82
80
-
-
Farbwiedergabe Index 3) Seite 17
Real thermal resistance junction / solder point
Realer Wärmewiderstand Sperrschicht / Lötpad
(typ.)
(max.)
Rth JS real
Rth JS real
0.7
0.9
K/W
K/W
"Electrical" thermal resistance junction / solder
(typ.)
(max.)
Rth JS el
Rth JS el
0.5
0.6
K/W
K/W
point
"Elektrischer" Wärmewiderstand Sperrschicht /
Lötpad
(with efficiency ηe = 35 %)
2014-01-28
4
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Brightness Groups
Helligkeitsgruppen
Group
Luminous Flux
Luminous Flux
Luminous Flux
Luminous Flux
1) page 17
1) page 17
4) page 17
4) page 17
Gruppe
Lichtstrom
Lichtstrom
Lichtstrom
Lichtstrom
1) Seite 17
1) Seite 17
4) Seite 17
4) Seite 17
TS = 85 °C
TS = 85 °C
TS = 25 °C
TS = 25 °C
(min.) ΦV [lm]
(max.) ΦV [lm]
(extrapolated min.) (extrapolated
ΦV [lm]
3340
3340
3625
3625
max.) ΦV [lm]
4280
TQTS
TQTT
TRTT
TRTU
3040
3040
3300
3300
3900
4190
4190
4500
4600
4600
4940
Note: The standard shipping format for serial types includes either a lower family group, an upper family group or
a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups
cannot be ordered.
Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere
Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne
Helligkeitsgruppen sind nicht bestellbar.
2014-01-28
5
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Chromaticity Coordinate Groups 5) page 17
Farbortgruppen 5) Seite 17
Cy
0.440
0.420
0.400
0.380
27S3
30S3
35S3
40S3
warm white
45S3
0.360
50S3
neutral white
57S3
0.340
65S3
0.320
cool white
0.300
0.300
0.320
0.340
0.360
0.380
0.400
0.420
0.440
0.460
0.480
0.500
Coordinates in reference to CIE 1931 (cx cy)
Cx
Color Chromaticity Groups 5) page 17
Farbortgruppen 5) Seite 17
Group
Cx
Cy
a
b
Θ
40S3
35S3
30S3
27S3
0.3823
0.4077
0.4339
0.4578
0.3790
0.3908
0.4020
0.4092
0.0094
0.0093
0.0085
0.0079
0.0040
0.0041
0.0041
0.0041
53
53
53
54
Note:
Cx and Cy are the center coordinates of the ellipse, a the length of the major axis, b the length of the minor axis and
Θ the angle of the major axis as defined in IEC 68001.
Anm.:
Cx und Cy sind die Mittelpunktkoordinaten der Ellipse, a die Länge der Hauptachse, b die Länge der Nebenachse
und Θ der Winkel der Hauptachse wie in IEC 68001 definiert.
2014-01-28
6
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: TQTS-35S3
Beispiel: TQTS-35S3
Brightness
Helligkeit
Chromaticity Coordinate
Farbort
TQTS
35S3
Note:
Anm.:
No packing unit / tape ever contains more than one group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2014-01-28
7
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Relative Spectral Emission - V(λ) = Standard eye response curve 6) page 18
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 6) Seite 18
Φrel = f (λ); TS = 85 °C; IF = 700 mA
GW KAHLB1.EM
1.0
Irel
: white
: Vλ
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
800
λ [nm]
Radiation Characteristics 6) page 18
Abstrahlcharakteristik 6) Seite 18
Irel = f (ϕ); TS = 85 °C
OHL01660
40˚
30˚
20˚
10˚
0˚
1.0
ϕ
50˚
0.8
0.6
0.4
0.2
0
60˚
70˚
80˚
90˚
100˚
1.0
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
120˚
2014-01-28
8
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Forward Current 6) page 18
Relative Luminous Flux 6) page 18 , 7) page 18
6) Seite 18
Durchlassstrom
Relativer Lichtstrom 6) Seite 18 , 7) Seite 18
ΦV/ΦV(700 mA) = f(IF); TS = 85 °C
GW KAHLB1.EM
IF = f (VF); TS = 85 °C
GW KAHLB1.EM
ΦV
V(700mA
1000
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
IF [mA
]
Φ
)
800
600
400
200
0
0
0
20
0
60
00
400
800
40
42
44
46
48
50
10
VF [
V]
IF [mA]
Chromaticity Coordinate Shift 6) page 18
Farbortverschiebung 6) Seite 18
Cx, Cy = f(IF); TS = 85 °C
GW KAHLB1.EM
Cx
Cy
: Cx
: Cy
0.44
0.43
0.42
0.41
0.40
0
0
0
00
20
400
60
800
10
IF [mA
]
2014-01-28
9
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Relative Forward Voltage 6) page 18
Relative Vorwärtsspannung 6) Seite 18
Relative Luminous Flux 6) page 18
Relative Lichtstrom 6) Seite 18
ΔVF = VF - VF(85 °C) = f(Tj); IF = 700 mA
ΦV/ΦV(85 °C) = f(Tj); IF = 700 mA
GW KAHLB1.EM
GW KAHLB1.EM
Φv
v(25°C
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
ΔVF [V]
Φ
)
4
3
2
1
0
-1
-40 -20
0
20 40 60 80 100 120
-40 -20
0
20 40 60 80 100 120
Tj [°C
]
Tj [°C]
Chromaticity Coordinate Shift 6) page 18
Farbortverschiebung 6) Seite 18
Cx, Cy = f(Tj); IF = 700 mA
GW KAHLB1.EM
Cx
Cy
0.44
: Cx
: Cy
0.43
0.42
0.41
0.40
-40 -20
0
20 40 60 80 100 120
Tj [°C
]
2014-01-28
10
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Max. Permissible Forward Current
Max. zulässiger Durchlassstrom
IF = f (T)
GW KAHLB1.EM
1100
IF [mA]
1000
900
800
700
600
500
400
300
200
100
0
Do not use below 150 mA
0
20
40
60
80
100
TS [°C]
2014-01-28
11
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Package Outline 8) page 18
Maßzeichnung 8) Seite 18
Approximate Weight:
Gewicht:
1.4 g
1.4 g
ESD information:
LED is protected by ESD device which is
connected in parallel to LED-Chip.
ESD Information:
Die LED enthält ein ESD-Bauteil, das parallel
zum Chip geschaltet ist.
Note:
Anm.:
Package not suitable for ultra sonic cleaning.
Das Gehäuse ist für Ultraschallreinigung nicht
geeignet.
2014-01-28
12
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Tray
Bauteilträger
Min. 40 pcs. per packing unit (20 units per tray, min. 2 trays per vacuum bag)
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
OSRAM Opto
BIN1: XX-XX-X-XXX-X
LX XXXX
Semiconductors
RoHS Compliant
(6P) BATCH NO: 1234567890
ML Temp ST
X
XXX °C X
(1T) LOT NO: 1234567890
(9D) D/C: 1234
Pack: RXX
DEMY
XXX
X_X123_1234.1234 X
(X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X
OHA04563
Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in
chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references
like JEDEC.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem
Trockenmittel und einer Feuchteindikatorkarte.
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form
Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind
Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
2014-01-28
13
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Transportation Packing and Materials
Kartonverpackung und Materialien
Box
Barcode label
0
0
-2
-2
-
:
1
P
2
-1
:
1
Q
T
S
R
i
n
B
:
in
3
p
m
B
Y
M
6
in
e
C
R
7
B
T
0
C
T
6
D
L
2
2
R
T
X
DE
T
E
M
0
2
C
24
0
E
T
l
Y
L
2
6
S
P
a
a
8
1
L
O
2
n
T
3
it
io
: R
-
1
Q
i
d
R
A
V
lt
A
d
7
+
-
1
u
0
7
K
M
R
C
: P
P
A
P
U
O
R
G
)
(G
4
4
C: 01
8
9
s
r
/
D
)
D
19
to
2
c
u
00
(9
d
1
0
n
2
0
o
:
4
3
2
0
ic
AM Opto
O
:
2
N
OSR
m
e
S
H
C
1
TY
)Q
(
Q
T
H
A
G
3
2
B
)
P
: 1
(6
O
N
2
5
T
4
1
O
L
0
)
0
T
(1
: 1
1
O
N
D
O
R
P
)
(X
Original packing label
OHA02886
Dimensions of transportation box in mm (inch):
Width / Breite
333 ± 5 (13.110 ± 0.197)
Length / Länge
218 ± 5 (8.583 ± 0.197)
Height / Höhe
28 ± 5 (1.102 ± 0.197)
2014-01-28
14
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Notes
Hinweise
The evaluation of eye safety occurs according to the
standard IEC 62471:2008 ("photobiological safety of
lamps and lamp systems"). Within the risk grouping
system of this CIE standard, the LED specified in this
data sheet fall into the class Low risk (exposure time
100 s). Under real circumstances (for exposure time,
eye pupils, observation distance), it is assumed that
no endangerment to the eye exists from these
devices. As a matter of principle, however, it should
be mentioned that intense light sources have a high
secondary exposure potential due to their blinding
effect. As is also true when viewing other bright light
sources (e.g. headlights), temporary reduction in
visual acuity and afterimages can occur, leading to
irritation, annoyance, visual impairment, and even
accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach
dem Standard IEC 62471:2008 ("photobiological
safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die
in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Low risk (Expositionsdauer
100 s). Unter realen Umständen (für
Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass
intensive Lichtquellen durch ihre Blendwirkung ein
hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Autoscheinwerfer), kann ein temporär
eingeschränktes Sehvermögen oder auch
Nachbilder zu Irritationen, Belästigungen,
Beeinträchtigungen oder sogar Unfällen führen.
This LED contains metal materials. Corroded metal
may lead to a worsening of the optical performance
of the LED and can in the worst case lead to a failure
of the LED. Do not expose this LED to aggressive
atmospheres. Note, that corrosive gases may as
well be emitted from materials close to the LED in the
final product.
Diese LED enthält teilweise metallische
Bestandteile. Korrodiertes Metall kann zu einer
Verschlechterung der optischen Eigenschaften und
im schlimmsten Fall zum Ausfall der LED führen.
Diese LED darf aggressiven Bedingungen nicht
ausgesetzt werden. Es ist zu beachten, dass
korrosive Gase auch von Materialien emittiert
werden können, die sich im Endprodukt in
unmittelbarer Umgebung der LED befinden.
For further application related informations
please visit www.osram-os.com/appnotes
Für weitere applikationsspezifische
Informationen besuchen Sie bitte
www.osram-os.com/appnotes
Change management for this component is aligned
with the requirements of the lighting market.
Das Änderungsmanagement dieses Bauteils ist an
den Anforderungen des Lichtmarktes ausgerichtet.
2014-01-28
15
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Disclaimer
Disclaimer
OSRAM OS assumes no liability whatsoever for any use
of this document or its content by recipient including, but
not limited to, for any design in activities based on this
preliminary draft version. OSRAM OS may e.g. decide at
its sole discretion to stop developing and/or finalising the
underlying design at any time.
OSRAM OS übernimmt keine wie auch immer geartete
Haftung für die Nutzung dieses Dokuments und seines
Inhaltes durch den Empfänger, insbesondere nicht für
irgendwelche Design-Aktivitäten, die auf dieser
vorläufigen Entwurfsversion basieren. OSRAM OS
behält sich beispielsweise auch vor, jederzeit die
Weiter- und Fertigentwicklung des zugrundeliegenden
Designs einseitig einzustellen.
Attention please!
Bitte beachten!
The information describes the type of component and
shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may contain
dangerous substances.
Lieferbedingungen und Änderungen im Design
vorbehalten. Aufgrund technischer Anforderungen
können die Bauteile Gefahrstoffe enthalten. Für weitere
Informationen zu gewünschten Bauteilen, wenden Sie
sich bitte an unseren Vertrieb. Falls Sie dieses
Datenblatt ausgedruckt oder heruntergeladen haben,
finden Sie die aktuellste Version im Internet.
For information on the types in question please contact
our Sales Organization.
If printed or downloaded, please find the latest version in
the Internet.
Verpackung
Benutzen Sie bitte die Ihnen bekannten Recyclingwege.
Wenn diese nicht bekannt sein sollten, wenden Sie sich
bitte an das nächstgelegene Vertriebsbüro. Wir nehmen
das Verpackungsmaterial zurück, falls dies vereinbart
wurde und das Material sortiert ist. Sie tragen die
Transportkosten. Für Verpackungsmaterial, das
unsortiert an uns zurückgeschickt wird oder das wir nicht
annehmen müssen, stellen wir Ihnen die anfallenden
Kosten in Rechnung.
Packing
Please use the recycling operators known to you. We
can also help you – get in touch with your nearest sales
office.
By agreement we will take packing material back, if it is
sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which
we are not obliged to accept, we shall have to invoice
you for any costs incurred.
Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Components used in life-support devices or
systems must be expressly authorized for such
purpose!
Kritische Bauteile* dürfen in lebenserhaltenden
Apparaten und Systemen** nur dann eingesetzt
werden, wenn ein schriftliches Einverständnis von
OSRAM OS vorliegt.
Critical components* may only be used in life-support
devices** or systems with the express written approval
of OSRAM OS.
*) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or the
effectiveness of that device or system.
*) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer Fehlfunktion dieses lebenserhaltenden Apparates
oder Systems führen wird oder die Sicherheit oder
**) Life support devices or systems are intended (a) to be
implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is
reasonable to assume that the health and the life of the
user may be endangered.
Effektivität
dieses
Apparates
oder
Systems
beeinträchtigt.
**) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt. Falls Sie
versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
2014-01-28
16
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Glossary
Glossar
1)
1)
Brightness: Brightness values are measured during
Helligkeit: Helligkeitswerte werden während eines
Strompulses einer typischen Dauer von 25 ms, mit
einer internen Reproduzierbarkeit von ± 8 % und
einer erweiterten Messunsicherheit von ± 11 %
gemessen (gemäß GUM mit Erweiterungsfaktor
k = 3).
a current pulse of typically 25 ms, with an internal
reproducibility of ± 8 % and an expanded uncertainty
of ± 11 % (acc. to GUM with a coverage factor of
k = 3).
2)
2)
3)
Forward Voltage: The forward voltage is measured
Durchlassspannung: Vorwärtsspannungen
during a current pulse of typically 8 ms, with an
internal reproducibility of ± 0.05 V and an expanded
uncertainty of ± 0.1 V (acc. to GUM with a coverage
factor of k = 3).
werden während eines Strompulses einer typischen
Dauer
von
8 ms,
mit
einer
internen
Reproduzierbarkeit von ± 0,05 V und einer
erweiterten Messunsicherheit von ± 0,1 V gemessen
(gemäß GUM mit Erweiterungsfaktor k = 3).
3)
Color reproduction index: Color
reproduction
Farbwiedergabe Index: Werte
des
index values (CRI-RA) are measured during a
current pulse of typically 25 ms, with an internal
reproducibility of ± 2 and an expanded uncertainty of
± 3 (acc. to GUM with a coverage factor of k = 3).
Farbwiedergabe Index (CRI-RA) werden während
eines Strompulses einer typischen Dauer von 25 ms,
mit einer internen Reproduzierbarkeit von ± 2 und
einer erweiterten Messunsicherheit von ± 3
gemessen (gemäß GUM mit Erweiterungsfaktor
k = 3).
4)
5)
4)
5)
Extrapolated Values: The stated values are
extrapolated data. These values are based on the
devices testing limits. The extrapolation is based on
the typical temperature and forward current
characteristics of the device.
Extrapolierte Werte: Bei den angegebenen Werten
handelt es sich um extrapolierte Angaben. Diese
basieren auf den für das Bauteil spezifizierten
Testgrenzen. Die Extrapolation erfolgte anhand der
typischen Temperatur- und Stromabhängigkeit des
Bauteils.
Chromaticity coordinate groups: Chromaticity
coordinates are measured during a current pulse of
typically 25 ms, with an internal reproducibility of
± 0.005 and an expanded uncertainty of ± 0.01 (acc.
to GUM with a coverage factor of k = 3). For testing
Farbortgruppen: Farbkoordinaten werden während
eines Strompulses einer typischen Dauer von 25 ms,
mit einer internen Reproduzierbarkeit von ± 0,005
und einer erweiterten Messunsicherheit von ± 0,01
gemessen (gemäß GUM mit Erweiterungsfaktor
k = 3). Beim Testen werden die Ellipsen durch
Polygonzüge angenähert.
the
chromaticity
coordinate
ellipses
are
approximated with polygons.
2014-01-28
17
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Glossary
Glossar
6)
6)
Typical Values: Due to the special conditions of the
Typische Werte: Wegen
der
besonderen
manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can
only reflect statistical figures. These do not
necessarily correspond to the actual parameters of
each single product, which could differ from the
typical data and calculated correlations or the typical
characteristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
Prozessbedingungen bei der Herstellung von LED
können typische oder abgeleitete technische
Parameter nur aufgrund statistischer Werte
wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden
diese typischen Werte ohne weitere Ankündigung
geändert.
7)
7)
8)
Relative Brightness Curve: In the range where the
Relative Helligkeitskurve: Im
gestrichelten
line of the graph is broken, you must expect higher
brightness differences between single LEDs within
one packing unit.
Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden zwischen Leuchtdioden
innerhalb einer Verpackungseinheit gerechnet
werden.
8)
Tolerance of Measure: Unless otherwise noted in
Maßtoleranz: Wenn in der Zeichnung nicht anders
angegeben, gilt eine Toleranz von ±0,1. Maße
werden in mm angegeben.
drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
2014-01-28
18
DRAFT – For Reference only.
Subject to change.
Draft Version 0.0
GW KAHLB1.EM
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
2014-01-28
19
DRAFT – For Reference only.
Subject to change.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明