Q65111A6687 [OSRAM]

Infrared Emitter Arrays (940 nm);
Q65111A6687
型号: Q65111A6687
厂家: OSRAM GMBH    OSRAM GMBH
描述:

Infrared Emitter Arrays (940 nm)

文件: 总12页 (文件大小:473K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
2015-01-16  
Infrared Emitter Arrays (940 nm)  
IR-Lumineszenzdioden-Zeilen (940 nm)  
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/  
4940  
Features:  
Besondere Merkmale:  
Wavelength 950nm  
Wellenlänge 950nm  
Leadframe arrays, available from 2 to 10 Emitters  
per array  
Zeilenbauform, lieferbar von 2 bis 10 Emitter pro  
Zeile  
Short switching times  
Kurze Schaltzeiten  
Same package dimensions as BPX 80 series  
Miniature package  
gleiche Gehäuseabmaße wie die BPX 80-Serie  
Miniatur-Gehäuse  
Applications  
Anwendungen  
Miniature photointerrupters  
Barcode reader  
Miniaturlichtschranken  
Barcode-Leser  
Industrial electronics  
For control and drive circuits  
Sensor technology  
Industrieelektronik  
„Messen/Steuern/Regeln”  
Sensorik  
Speed controller  
Drehzahlsteuerung  
Notes  
Hinweise  
Depending on the mode of operation, these devices  
emit highly concentrated non visible infrared light  
which can be hazardous to the human eye. Products  
which incorporate these devices have to follow the  
safety precautions given in IEC 60825-1 and IEC  
62471.  
Je nach Betriebsart emittieren diese Bauteile  
hochkonzentrierte, nicht sichtbare  
Infrarot-Strahlung, die gefährlich für das  
menschliche Auge sein kann. Produkte, die diese  
Bauteile enthalten, müssen gemäß den  
Sicherheitsrichtlinien der IEC-Normen 60825-1 und  
62471 behandelt werden.  
2015-01-16  
1
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Ordering Information  
Bestellinformation  
Type:  
Typ:  
Radiant Intensity  
Strahlstärke  
IF = 40 mA, tp = 20 ms  
Ie [mW/sr]  
50 (≥ 16)  
Ordering Code  
Bestellnummer  
SFH 4942  
SFH 4943  
SFH 4944  
SFH 4945  
SFH 4946  
SFH 4947  
SFH 4948  
SFH 4949  
SFH 4940  
Q65111A6679  
Q65111A6680  
Q65111A6681  
Q65111A6682  
Q65111A6683  
Q65111A6684  
Q65111A6685  
Q65111A6686  
Q65111A6687  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
50 (≥ 16)  
Note:  
Anm.:  
measured at a solid angle of Ω = 0.001 sr  
gemessen bei einem Raumwinkel Ω = 0.001 sr  
Maximum Ratings (TA = 25 °C)  
Grenzwerte  
Parameter  
Symbol  
Symbol  
Values  
Werte  
Unit  
Einheit  
°C  
Bezeichnung  
Operation and storage temperature range  
Betriebs- und Lagertemperatur  
Top; Tstg  
-40 ... 80  
Reverse voltage  
Sperrspannung  
VR  
5
40  
1
V
Forward current  
Durchlassstrom  
IF  
mA  
A
Surge current  
Stoßstrom  
(tp ≤ 40 µs, D = 0)  
IFSM  
Total power dissipation  
Verlustleistung  
Ptot  
70  
mW  
2015-01-16  
2
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Parameter  
Symbol  
Symbol  
VESD  
Values  
Werte  
2
Unit  
Bezeichnung  
Einheit  
kV  
ESD withstand voltage  
ESD Festigkeit  
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)  
Thermal resistance junction - ambient 1) page 11  
RthJA  
750  
650  
K / W  
K / W  
Wärmewiderstand Sperrschicht - Umgebung  
1) Seite 11  
Thermal resistance junction - soldering point  
Wämewiderstand Sperrschicht - Lötstelle  
RthJS  
Characteristics (TA = 25 °C)  
Kennwerte  
Parameter  
Symbol  
Symbol  
λpeak  
Values  
Unit  
Bezeichnung  
Werte  
Einheit  
nm  
Peak wavelength  
Emissionswellenlänge  
(IF = 40 mA, tp = 20 ms)  
(typ)  
(typ)  
(typ)  
950  
Centroid Wavelength  
Schwerpunktwellenlänge  
(IF = 40 mA, tp = 20 ms)  
λcentroid  
940  
42  
nm  
nm  
°
Spectral bandwidth at 50% of Imax  
Spektrale Bandbreite bei 50% von Imax  
(IF = 40 mA, tp = 20 ms)  
∆λ  
Half angle  
Halbwinkel  
(typ)  
(typ)  
ϕ
± 10  
0.3 x 0.3  
1.3 ... 1.9  
12  
Dimensions of active chip area  
Abmessungen der aktiven Chipfläche  
L x W  
H
mm x  
mm  
Distance chip surface to lens top  
Abstand Chipoberfläche bis Linsenscheitel  
(min ..  
max)  
mm  
Rise and fall time of Ie ( 10% and 90% of Ie max  
Schaltzeit von Ie ( 10% und 90% von Ie max  
(IF = 40 mA, RL = 50 Ω)  
)
(typ)  
tr, tf  
ns  
)
Forward voltage  
(typ (max)) VF  
(typ (max)) VF  
1.35 (≤ 1.7)  
3.6 (≤ 4.6)  
V
V
Durchlassspannung  
(IF = 40 mA, tp = 20 ms)  
Forward voltage  
Durchlassspannung  
(IF = 1 A, tp = 40 µs)  
2015-01-16  
3
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Parameter  
Symbol  
Symbol  
Values  
Werte  
Unit  
Bezeichnung  
Einheit  
Reverse current  
Sperrstrom  
(VR = 5 V)  
(typ (max)) IR  
not designed for ꢀA  
reverse operation  
Total radiant flux  
(typ)  
(typ)  
(typ)  
(typ)  
Φe  
30  
mW  
Gesamtstrahlungsfluss  
(IF = 40 mA, tp = 20 ms)  
Temperature coefficient of Ie or Φe  
Temperaturkoeffizient von Ie bzw. Φe  
(IF = 40 mA, tp = 20 ms)  
TCI  
TCV  
TCλ  
-0.3  
-0.8  
0.3  
% / K  
Temperature coefficient of VF  
Temperaturkoeffizient von VF  
(IF = 40 mA, tp = 20 ms)  
mV / K  
nm / K  
Temperature coefficient of wavelength  
Temperaturkoeffizient der Wellenlänge  
(IF = 40 mA, tp = 20 ms)  
Grouping (TA = 25 °C)  
Gruppierung  
Group  
Min Radiant Intensity Max Radiant Intensity Typ Radiant Intensity  
Min Strahlstärke Max Strahlstärke Typ Strahlstärke  
IF = 40 mA, tp = 20 ms IF = 40 mA, tp = 20 ms IF = 1 A, tp = 40 µs  
Gruppe  
Ie, min [mW / sr]  
16  
Ie, max [mW / sr]  
125  
Ie, typ [mW / sr]  
520  
SFH  
4942/3/4/5/6/7/8/9/0  
Note:  
Anm.:  
measured at a solid angle of Ω = 0.01 sr  
gemessen bei einem Raumwinkel Ω = 0.01 sr  
2015-01-16  
4
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Relative Spectral Emission 2) page 11  
Relative spektrale Emission 2) Seite 11  
Irel = f(λ), TA = 25°C  
Radiant Intensity 2) page 11  
Strahlstärke 2) Seite 11  
Ie / Ie(40 mA) = f(IF), single pulse, tp = 40 µs,  
TA= 25°C  
OHF04134  
100  
%
OHF05660  
102  
Irel  
Ιe  
Ι
e (40 mA)  
80  
60  
40  
20  
0
101  
100  
10-1  
10-2  
800  
850  
900  
950  
nm 1025  
λ
100  
101  
102 mA 103  
IF  
2015-01-16  
5
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Forward Current 2) page 11  
Max. Permissible Forward Current  
Max. zulässiger Durchlassstrom  
IF, max = f(TA), RthJA = 750 K / W  
Durchlassstrom 2) Seite 11  
IF = f(VF), single pulse, tp = 40 µs, TA= 25°C  
OHF05661  
OHF05642  
103  
45  
mA  
40  
mA  
IF  
IF  
35  
30  
25  
20  
15  
10  
5
102  
101  
100  
0
0
20  
40  
60  
80 ˚C 100  
0
1
2
3
V 4  
TA  
VF  
Permissible Pulse Handling Capability  
Zulässige Pulsbelastbarkeit  
IF = f(tp), TC = 25 °C, duty cycle D = parameter  
OHF05662  
1.1  
A
tP  
tP  
IF  
IF  
D
= T  
T
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
D
=
0.005  
0.01  
0.02  
0.05  
0.1  
0.2  
0.5  
1
10-5 10-4 10-3 10-2 10-1 100 101 s 102  
tp  
2015-01-16  
6
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Radiation Characteristics 2) page 11  
Abstrahlcharakteristik 2) Seite 11  
Irel = f(ϕ), TA= 25°C  
40˚  
30˚  
20˚  
10˚  
0˚  
OHF05663  
1.0  
50˚  
0.8  
0.6  
0.4  
60˚  
70˚  
0.2  
0
80˚  
90˚  
100˚  
1.0  
0.8  
0.6  
0.4  
0˚  
20˚  
40˚  
60˚  
80˚  
100˚  
120˚  
Package Outline  
Maßzeichnung  
Dimensions in mm. / Maße in mm.  
2015-01-16  
7
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Type:  
IRED per Row  
Dimension "B"  
Maß "B"  
Typ:  
IRED pro Zeile  
SFH 4942  
SFH 4943  
SFH 4944  
SFH 4945  
SFH 4946  
SFH 4947  
SFH 4948  
SFH 4949  
SFH 4940  
2
4.5 ... 4.9  
3
7.0 ... 7.4  
4
9.6 ... 10.0  
12.1 ... 12.5  
14.6 ... 16.0  
17.2 ... 17.6  
19.7 ... 20.1  
22.3 ... 22.7  
24.8 ... 25.2  
5
6
7
8
9
10  
Package  
Gehäuse  
Miniature Array, solder tabs lead spacing 2.54  
mm (1/10"), cathode marking flag, Epoxy, black  
Miniatur Array, Anschlüsse im 2.54 mm-Raster  
(1/10"), Kathodenkennzeichnung „Fahne" am  
Gehäuse, Harz, schwarz  
Recommended Solder Pad  
Empfohlenes Lötpaddesign  
Dimensions in mm. / Maße in mm.  
2015-01-16  
8
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
TTW Soldering  
Wellenlöten (TTW)  
IEC-61760-1 TTW / IEC-61760-1 TTW  
OHA04645  
300  
10 s max., max. contact time 5 s per wave  
˚C  
T
Continuous line: typical process  
Dotted line: process limits  
250  
235 ˚C - 260 ˚C  
First wave  
Second wave  
T < 150 K  
200  
150  
100  
50  
Cooling  
Preheating  
ca. 3.5 K/s typical  
ca. 2 K/s  
130 ˚C  
120 ˚C  
100 ˚C  
ca. 5 K/s  
Typical  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
200  
220 s 240  
t
2015-01-16  
9
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Disclaimer  
Disclaimer  
Attention please!  
Bitte beachten!  
The information describes the type of component and  
shall not be considered as assured characteristics.  
Terms of delivery and rights to change design reserved.  
Due to technical requirements components may contain  
dangerous substances.  
Lieferbedingungen und Änderungen im Design  
vorbehalten. Aufgrund technischer Anforderungen  
können die Bauteile Gefahrstoffe enthalten. Für weitere  
Informationen zu gewünschten Bauteilen, wenden Sie  
sich bitte an unseren Vertrieb. Falls Sie dieses  
Datenblatt ausgedruckt oder heruntergeladen haben,  
finden Sie die aktuellste Version im Internet.  
For information on the types in question please contact  
our Sales Organization.  
If printed or downloaded, please find the latest version in  
the Internet.  
Verpackung  
Benutzen Sie bitte die Ihnen bekannten Recyclingwege.  
Wenn diese nicht bekannt sein sollten, wenden Sie sich  
bitte an das nächstgelegene Vertriebsbüro. Wir nehmen  
das Verpackungsmaterial zurück, falls dies vereinbart  
wurde und das Material sortiert ist. Sie tragen die  
Transportkosten. Für Verpackungsmaterial, das  
unsortiert an uns zurückgeschickt wird oder das wir nicht  
annehmen müssen, stellen wir Ihnen die anfallenden  
Kosten in Rechnung.  
Packing  
Please use the recycling operators known to you. We  
can also help you – get in touch with your nearest sales  
office.  
By agreement we will take packing material back, if it is  
sorted. You must bear the costs of transport. For  
packing material that is returned to us unsorted or which  
we are not obliged to accept, we shall have to invoice  
you for any costs incurred.  
Bauteile, die in lebenserhaltenden Apparaten und  
Systemen eingesetzt werden, müssen für diese  
Zwecke ausdrücklich zugelassen sein!  
Components used in life-support devices or  
systems must be expressly authorized for such  
purpose!  
Kritische Bauteile* dürfen in lebenserhaltenden  
Apparaten und Systemen** nur dann eingesetzt  
werden, wenn ein schriftliches Einverständnis von  
OSRAM OS vorliegt.  
Critical components* may only be used in life-support  
devices** or systems with the express written approval  
of OSRAM OS.  
*)  
A
critical component is a component used in  
a
*) Ein kritisches Bauteil ist ein Bauteil, das in  
life-support device or system whose failure can  
reasonably be expected to cause the failure of that  
life-support device or system, or to affect its safety or the  
effectiveness of that device or system.  
lebenserhaltenden  
Apparaten  
oder  
Systemen  
eingesetzt wird und dessen Defekt voraussichtlich zu  
einer Fehlfunktion dieses lebenserhaltenden Apparates  
oder Systems führen wird oder die Sicherheit oder  
**) Life support devices or systems are intended (a) to be  
implanted in the human body, or (b) to support and/or  
maintain and sustain human life. If they fail, it is  
reasonable to assume that the health and the life of the  
user may be endangered.  
Effektivität  
dieses  
Apparates  
oder  
Systems  
beeinträchtigt.  
**) Lebenserhaltende Apparate oder Systeme sind für  
(a) die Implantierung in den menschlichen Körper oder  
(b) für die Lebenserhaltung bestimmt. Falls Sie  
versagen, kann davon ausgegangen werden, dass die  
Gesundheit und das Leben des Patienten in Gefahr ist.  
2015-01-16  
10  
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Glossary  
Glossar  
1)  
1)  
Thermal resistance: junction -ambient, mounted  
Wärmewiderstand: Sperrschicht -Umgebung, bei  
on PC-board (FR4), padsize 16 mm2 each  
Montage auf FR4 Platine, Padgröße je 16 mm2  
2)  
2)  
Typical Values: Due to the special conditions of the  
manufacturing processes of LED, the typical data or  
calculated correlations of technical parameters can  
only reflect statistical figures. These do not  
necessarily correspond to the actual parameters of  
each single product, which could differ from the  
typical data and calculated correlations or the typical  
characteristic line. If requested, e.g. because of  
technical improvements, these typ. data will be  
changed without any further notice.  
Typische Werte: Wegen  
der  
besonderen  
Prozessbedingungen bei der Herstellung von LED  
können typische oder abgeleitete technische  
Parameter nur aufgrund statistischer Werte  
wiedergegeben werden. Diese stimmen nicht  
notwendigerweise mit den Werten jedes einzelnen  
Produktes überein, dessen Werte sich von typischen  
und abgeleiteten Werten oder typischen Kennlinien  
unterscheiden können. Falls erforderlich, z.B.  
aufgrund technischer Verbesserungen, werden  
diese typischen Werte ohne weitere Ankündigung  
geändert.  
2015-01-16  
11  
Version 1.0  
SFH 4942/ 4943/ 4944/ 4945/ 4946/ 4947/ 4948/ 4949/ 4940  
Published by OSRAM Opto Semiconductors GmbH  
Leibnizstraße 4, D-93055 Regensburg  
www.osram-os.com © All Rights Reserved.  
2015-01-16  
12  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY