APT1231AZ [PANASONIC]
Triac Output Optocoupler With Zero CRSVR, 1-Element, 5000V Isolation, ROHS COMPLIANT, SMD, DIP-4;
| 型号： | APT1231AZ |
| 厂家： | 
PANASONIC |
| 描述： | Triac Output Optocoupler With Zero CRSVR, 1-Element, 5000V Isolation, ROHS COMPLIANT, SMD, DIP-4 驱动器 可控硅 光电 继电器 固态继电器 三端双向交流开关 输出元件 |
| 文件： | 总8页 (文件大小：153K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
VDE
Phototriac coupler
ideal for triac driver
with wide variation
APT
Phototriac Coupler
FEATURES
TYPICAL APPLICATIONS
1. Low zero-cross voltage (max. 15 V)
type added to lineup. Approximately
1/3 of previous product
1. For triac driver in heater controls of
products such as office equipment,
home appliances, and industrial
machines. (For 100V/200V, 50/60 Hz
lines)
Helps reduce device noises even further.
Previous product: max. 50 V
New product: max. 15 V
Load voltage
2.Triac driver for SSRs
High noise
Low noise
Large
interfering wave
Small
interfering wave
1
2
3
6
1
2
4
3
ZC
Zero-cross circuit
2.Two types available: Random type
and zero-cross type
ZC
4
6
Zero-cross circuit
3. Many package sizes available.
(Wide terminal type with 10.16 mm
pitch between I/O terminals available.)
4. High dielectric strength. (Between
input and output: SOP 3, 750 V; DIP
5,000 V)
1
2
3
1
2
4
3
4
5. Handles both 100 and 200 V AC
loads
This relay handles both voltages in a
single product it is not necessary for
users that use both types to manage
separate part numbers.
6.Terminal 5 of the DIP 6-pin type is
completely molded.
RoHS compliant
TYPES
1. SOP4 Type
Output rating
Part No.
Packing quantity
Package
size
Type
Type
Repetitive peak
OFF-state voltage
ON-state RMS
current
Tube packing
Tape and reel packing style
Tube
Tape and reel
style
APT1211SX APT1211SZ
(Picked from the (Picked from the
Zero-cross
(max. 50 V)
APT1211S
1/2-pin side)
3/4-pin side)
1 tube contains:
100 pcs.
1 batch contains:
2, 000 pcs.
APT1231SX
(Picked from the (Picked from the
1/2-pin side)
APT1231SZ
AC
type
Zero-cross
(max. 15 V)
600 V
50 mA
SOP4pin
APT1231S
APT1221S
1, 000 pcs.
3/4-pin side)
APT1221SX
(Picked from the (Picked from the
1/2-pin side) 3/4-pin side)
APT1221SZ
Random
Note: For space reasons, the initial letters of the product number “APT” and “S” are omitted on the product seal.
The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number APT1221SZ is 1221).
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
2. DIP4/6 Type
Output rating
Part No.
Packing quantity
Repetitive
peak
OFF-state
voltage
Through hole
terminal
Package
size
ON-state
RMS
current
Surface-mount terminal
Type
Type
Tube packing style
Tape and reel packing style
APT1211AX APT1211AZ
(Picked from the (Picked from the
1/2-pin side)
Tube
Tape and reel
Zero-cross
(max. 50 V)
APT1211
APT1231
APT1221
APT1212
APT1232
APT1222
APT1211A
APT1231A
APT1221A
APT1212A
APT1232A
APT1222A
3/4-pin side)
APT1231AX
(Picked from the (Picked from the
1/2-pin side)
APT1231AZ
Zero-cross
(max. 15 V)
[DIP4pin]
1 tube contains:
100 pcs.
DIP4pin
3/4-pin side)
APT1221AX
(Picked from the (Picked from the
1/2-pin side)
APT1221AZ
1 batch contains:
1,000 pcs.
Random
[DIP4pin]
[DIP6pin]
1,000 pcs.
3/4-pin side)
AC
type
600 V
100 mA
APT1212AX
(Picked from the (Picked from the
1/2/3-pin side)
APT1212AZ
[DIP6pin]
1 tube contains:
50 pcs.
Zero-cross
(max. 50 V)
4/6-pin side)
APT1232AX
(Picked from the (Picked from the
1/2/3-pin side)
APT1232AZ
1 batch contains:
500 pcs.
Zero-cross
(max. 15 V)
DIP6pin
4/6-pin side)
APT1222AX
(Picked from the (Picked from the
1/2/3-pin side) 4/6-pin side)
APT1222AZ
Random
Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “A”, which indicates the SMD terminal shape for the DIP 4-pin and
6-pin types, and the package type indications “X” and “Z” have been omitted from the product label. (Example: The label for product number APT1221AZ is 1221.)
3. DIP4/6 Wide Terminal Type
Output rating*
Part No.
Packing quantity
Repetitive
peak
OFF-state
voltage
Through hole
terminal
Package
size
ON-state
RMS
current
Surface-mount terminal
Type
Type
Tube packing style
Tape and reel packing style
APT1211WAY APT1211WAW
(Picked from the (Picked from the
1/4-pin side)
Tube
Tape and reel
Zero-cross
(max. 50 V)
APT1211W
APT1231W
APT1221W
APT1212W
APT1232W
APT1222W
APT1211WA
APT1231WA
APT1221WA
APT1212WA
APT1232WA
APT1222WA
2/3-pin side)
APT1231WAY
APT1231WAW
Zero-cross
(max. 15 V)
[DIP4pin]
1 tube contains:
100 pcs.
DIP4pin
(Picked from the (Picked from the
1/4-pin side)
2/3-pin side)
APT1221WAY
APT1221WAW
1 batch contains:
1,000 pcs.
Random
(Picked from the (Picked from the
1/4-pin side)
[DIP4pin]
[DIP6pin]
1,000 pcs.
2/3-pin side)
AC
type
600 V
100 mA
APT1212WAY
APT1212WAW
[DIP6pin]
1 tube contains:
50 pcs.
Zero-cross
(max. 50 V)
(Picked from the (Picked from the
1/6-pin side)
3/4-pin side)
APT1232WAY
APT1232WAW
1 batch contains:
500 pcs.
Zero-cross
(max. 15 V)
DIP6pin
(Picked from the (Picked from the
1/6-pin side)
3/4-pin side)
APT1222WAY
APT1222WAW
Random
(Picked from the (Picked from the
1/6-pin side) 3/4-pin side)
Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “WA”, which indicates the SMD terminal shape for the DIP 4-pin and
6-pin types, and the package type indications “Y” and “W” have been omitted from the product label. (Example: The label for product number APT1221WAY is 1221.)
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
1) SOP4 types
Item
Symbol
APT1211S, APT1221S, APT1231S
Remarks
LED forward current
LED reverse voltage
IF
50 mA
6 V
VR
Input
f = 100 Hz,
Duty Ratio = 0.1%
Peak forward current
IFP
1 A
Repetitive peak
OFF-state voltage
VDRM
IT(RMS)
ITSM
600 V
0.05 A
0.6 A
Output ON-state RMS current*
AC
Non-repetitive surge
current
In one cycle at 60Hz
Total power dissipation
I/O isolation voltage
PT
350 mW
Viso
3,750 V AC
Non-condensing at
low temperatures
Operating
Topr
Tstg
–40°C to +100°C –40°F to +212°F
–40°C to +125°C –40°F to +257°F
Temperature limits
Storage
Note: “X” and “Z” at the end of the part numbers have been omitted.
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
2) DIP4/6 type and DIP4/6 Wide terminal type
Item
Symbol
APT1211(W), APT1221(W), APT1231(W), APT1212(W), APT1222(W), APT1232(W)
Remarks
LED forward current
LED reverse voltage
IF
50 mA
6 V
VR
Input
f = 100 Hz,
Duty Ratio = 0.1%
Peak forward current
IFP
1 A
Repetitive peak
OFF-state voltage
VDRM
IT(RMS)
ITSM
600 V
0.1 A
1.2 A
Output ON-state RMS current*
AC
Non-repetitive surge
current
In one cycle at 60Hz
Total power dissipation
I/O isolation voltage
PT
500 mW
Viso
5,000 V AC
Non-condensing at
low temperatures
Operating
Topr
Tstg
–40°C to +100°C –40°F to +212°F
–40°C to +125°C –40°F to +257°F
Temperature limits
Storage
Note: “A”, “AX”, “AZ” “AY” and “AW” at the end of the part numbers have been omitted.
* Do not exceed 0.05 A of ON state RMS current in case of following load voltage condition.
DIP4pin (APT1211, APT1221, APT1231) and DIP4pin wide terminal type (APT1211W, APT1221W, APT1231W): more than 100 V AC;
DIP6pin (APT1212, APT1222, APT1232) and DIP6pin wide terminal type (APT1212W, APT1222W, APT1232W): more than 120 V AC.
2. Characteristics (Ambient temperature: 25°C 77°F)
1) Zero-cross type (max. 50V) and random type
Item
Symbol APT1211S, APT1211(W), APT1212(W) APT1221S, APT1221(W), APT1222(W)
Condition
Typical
1.21 V
LED dropout voltage
VF
IF = 20 mA
Maximum
Typical
1.3 V
Input
—
LED reverse current
IR
VR = 6 V
Maximum
Typical
10 µA
—
Repetitive peak
OFF-state current
IF = 0 mA
VDRM = 600 V
IDRM
Maximum
Typical
1 µA
1.3 V
Repetitive peak
On-state voltage
IF = 10 mA
ITM = 0.05 A
VTM
Maximum
Typical
2.5 V
Output
0.3 mA
Holding current
IH
Maximum
3.5 mA
Critical rate of rise of
OFF-state voltage
Minimum
dv/dt
500 V/µs
VDRM = 600 V ×1/M2
VD = 6 V
RL = 100 Ω
IF = 10 mA
Trigger LED current
Zero-cross voltage
Maximum
Maximum
IFT
10 mA
VZC
50 V
—
IF = 20 mA
VD = 6 V
RL = 100 Ω
Transfer
characteristics
Turn on time*
Maximum
Ton
100 µs
f = 1 MHz
VB = 0 V
I/O capacitance
Maximum
Ciso
1.5 pF
I/O isolation resistance Minimum
Notes: 1. For type of connection, see page 41.
2. Terminals are either solder plated or solder dipped.
Riso
50 GΩ
500 V DC
*Turn on time
Input
90%
Output
Ton
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
2) Zero-cross type (max. 15V)
Item
Symbol
VF
APT1231S, APT1231(W), APT1232(W)
Condition
IF = 20 mA
Typical
1.21 V
1.3 V
—
LED dropout voltage
Input
Maximum
Typical
LED reverse current
IR
VR = 6 V
Maximum
Typical
10 µA
—
Repetitive peak
OFF-state current
IF = 0 mA
VDRM = 600 V
IDRM
VTM
Maximum
Typical
1 µA
1.2 V
2 V
Repetitive peak
On-state voltage
IF = 10 mA
ITM = 0.03 A
Maximum
Typical
Output
0.3 mA
3.5 mA
Holding current
IH
Maximum
Critical rate of rise of
OFF-state voltage
Minimum
dv/dt
500 V/µs
VDRM = 600 V ×1/M2
Trigger LED current
Zero-cross voltage
Maximum
Maximum
IFT
10 mA
15 V
ITM = 0.03 A
IF = 10 mA
VZC
IF = 20 mA
ITM = 0.03 A
Transfer
characteristics
Turn on time*
Maximum
Maximum
Ton
100 µs
f = 1 MHz
VB = 0 V
I/O capacitance
Ciso
1.5 pF
I/O isolation resistance Minimum
Notes: 1. For type of connection, see page 41.
Riso
50 GΩ
500 V DC
*Turn on time
2. Terminals are either solder plated or solder dipped.
Input
90%
Output
Ton
RECOMMENDED OPERATING CONDITIONS
Please follow the conditions below in order to ensure accurate
operation and release of the phototriac coupler.
Item
Symbol
IF
Value
20
Unit
mA
Input LED current
REFERENCE DATA
1-(1). ON-state RMS current vs. ambient
temperature characteristics
1-(2). ON-state RMS current vs. ambient
temperature characteristics
1-(3). ON-state RMS current vs. ambient
temperature characteristics
Allowable ambient temperature: –40°C to +100°C
Allowable ambient temperature: –40°C to +100°C
Allowable ambient temperature: –40°C to +100°C
–40°F to +212°F
–40°F to +212°F
–40°F to +212°F
Tested sample: APT1211S, APT1221S
Tested sample: APT1231S
Tested sample: APT1211(A), APT1221(A),
APT1211W(A), APT1221W(A)
70
60
50
40
30
20
10
0
70
60
50
40
30
20
120
VL 100V AC
100
80
60
VL > 100V AC
40
20
0
10
0
–40 –20
0
20
40
60
80 100
-40 -20
0
20
40
60
80 100
–40 –20
0
20
40
60
80 100
Ambient temperature, °C
Ambient temperature, °C
Ambient temperature, °C
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
1-(4). ON-state RMS current vs. ambient
temperature characteristics
1-(5). ON-state RMS current vs. ambient
temperature characteristics
1-(6). ON-state RMS current vs. ambient
temperature characteristics
Allowable ambient temperature: –40°C to +100°C
Allowable ambient temperature: –40°C to +100°C
Allowable ambient temperature: –40°C to +100°C
–40°F to +212°F
–40°F to +212°F
–40°F to +212°F
Tested sample: APT1231(A), APT1231W(A)
Tested sample: APT1212(A), APT1222(A),
APT1212W(A), APT1222W(A)
Tested sample: APT1232(A), APT1232W(A)
120
120
120
VL 100V AC
100
VL 120V AC
100
VL 120V AC
100
80
80
80
60
60
60
VL > 100V AC
VL > 120V AC
VL > 120V AC
40
40
40
20
0
20
0
20
0
–40 –20
0
20
40
60
80 100
–40 –20
0
20
40
60
80 100
–40 –20
0
20
40
60
80 100
Ambient temperature, °C
Ambient temperature, °C
Ambient temperature, °C
2. On voltage vs. ambient temperature
characteristics
3.Trigger LED current vs. ambient temperature
characteristics
4. LED dropout voltage vs. ambient
temperature characteristics
10
1.5
1.4
1.3
1.2
1.1
1
1.8
8
1.6
APT121❍❍
6
APT122❍❍
50mA
1.4
4
30mA
20mA
APT123❍❍
1.2
10mA
2
0
0
–40 –20
0
20
40
60
80 100
–40 –20
0
20
40
60
80 100
–40 –20
0
20 40 60 80 100
Ambient temperature, °C
Ambient temperature, °C
Ambient temperature, °C
5. Turn on time vs. LED current characteristics
6. Repetitive peak OFF-state current vs. Load
voltage characteristics
7. Hold current vs. ambient temperature
characteristics
0.001
2
1.5
1
50
40
10–5
10–7
30
20
10–9
0.5
0
10–11
10–13
10
0
0
20
40
60
80
100
0
10
20
30
40
50
–40 –20
0
20
40
60
80 100
LED current, mA
Load voltage, V
Ambient temperature, °C
8. Zero-cross voltage vs. ambient temperature
characteristics
50
40
30
APT121❍❍
20
10
0
APT123❍❍
–40 –20
0
20
40
60
80 100
Ambient temperature, °C
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. SOP Type
APT1211S, APT1221S, APT1231S
External dimensions
Recommended mounting pad (TOP VIEW)
CAD Data
0.5
.020
6.0
.236
1.2
.047
4.4 0.2
6.8 0.4
.173 009
.268 016
0.8
.032
2.54
.100
0.5
.020
4.3 0.2
.169 .009
2.0 0.2
.079 .009
Tolerance: 0.1 .004
0.1
0.4
.004
.016
0.4
.016
2.54
.100
Terminal thickness = 0.15 .006
General tolerance: 0.1 .004
2. DIP4 Type
APT1211(A), APT1221(A), APT1231(A)
External dimensions
CAD Data
Through hole terminal type
Surface mount terminal type
Max. 10°
Max. 10°
6.4 0.05
.252 .002
7.62 0.05
.300 .002
6.4 0.05
.252 .002
7.62 0.05
.300 .002
Max. 10°
4.78 0.05
.188 .002
1.0
.039
2.7 0.05
.106 .002
4.78 0.05
.188 .002
2.7 0.05
.106 .002
3.2 0.2
.126 .008
0.2
2.7 0.05
.008
3.0
.118
.106 .002
0.33
.013
0.2
0.20.008
.0080
0.47
.019
1.0
0.47
.019
0.47
.019
0.47
.019
.039
1.0
.039
1.0
.039
2.54
.100
2.54
.100
Terminal thickness = 0.20 .008
General tolerance: 0.1 .004
PC board pattern (BOTTOM VIEW)
Recommended mounting pad (TOP VIEW)
4-0.8 dia.
4-.031 dia.
2.54
.100
8.3
.327
7.62
6.4
.300
.252
1.9
.075
2.54
.100
1.5
.059
2.54
.100
Tolerance: 0.1 .004
Tolerance: 0.1 .004
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
APT1
3. DIP4 Wide Terminal Type
APT1211W(A), APT1221W(A), APT1231W(A)
External dimensions
CAD Data
Through hole terminal type
Surface mount terminal type
Max. 10°
Max. 10°
0.05
.002
0.5
6.4
.252
10.16
.400
.020
0.5
0.05
.002
10.16
.400
6.4
.252
Max. 12.0
Max. .472
.020
Max. 10°
0.05
.002
0.05
.002
2.7
.106
4.78
1.88
0.05
2.7
.106
0.05
.002
4.78
.188
0.75
.030
.002
0.2
0.2
.008
.008
0.2 .008
3.0
.118
0.33 .013
2.54
.100
0.47 .019
0.47 .019
1.0 .039
Terminal thickness = 0.20 .008
General tolerance: 0.1 .004
2.54
.100
PC board pattern (BOTTOM VIEW)
Recommended mounting pad (TOP VIEW)
4-0.8 dia.
2.54
.100
4-.031 dia.
10.8
.425
1.9
6.4
.252
10.16
.400
.075
1.5
.059
2.54
.100
2.54
.100
Tolerance: 0.1 .004
Tolerance: 0.1 .004
4. DIP6 Type
APT1212(A), APT1222(A), APT1232(A)
External dimensions
CAD Data
Through hole terminal type
Surface mount terminal type
Max. 10°
Max. 10°
6.4 0.05
.252 .002
7.62 0.05
.300 .002
6.4 0.05
.252 .002
7.6
.299
Max. 10°
1
.039
8.8 0.05
.346 .002
3.4
8.8 0.05
.346 .002
3.4
.134
.134
3.9 0.2
3.4
.134
+0.2
.154 .008
0.2
−0
+.008
.008
−0
3.0
.118
0.47
.019
0.47
.019
0.47
.019
0.47
.019
0.47
.019
1.25
.049
1.25
.049
0.47
1.25
.049
2.54 2.54
.100 .100
.019
1.25
.049
1.25
.049
1.25
.049
2.54
.100
2.54
.100
Terminal thickness = 0.25 .010
General tolerance: 0.1 .004
PC board pattern (BOTTOM VIEW)
Recommended mounting pad (TOP VIEW)
5.08
5-0.8 dia.
.200
5-.031 dia.
2.54
.100
8.3
.327
7.62
.300
1.9
6.4
.252
2.54
.100
.075
1.5
.059
2.54 2.54
.100 .100
Tolerance: 0.1 .004
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
Tolerance: 0.1 .004
ASCTB217E 201201-T1
APT1
5. DIP6 Wide Terminal Type
APT1212W(A), APT1222W(A), APT1232W(A)
External dimensions
CAD Data
Through hole terminal type
Surface mount terminal type
Max. 10°
MAX. 10°
0.05
.002
6.4
.252
0.5
10.16
.400
.020
0.05
0.5
6.4
.252
Max. 12.0 10.16
Max. .472 .400
.002
.020
MAX. 10°
0.75
.030
3.4
.134
0.05
.002
8.8
.346
3.4
.134
0.05
8.8
.346
.002
3.0
.118
3.4
.134
0.47
.019
0.2
0.2
.008
0.47
.019
1.25
.049
.008
0.47
.019
0.47 .019
0.47
0.47
.019
1.25
.049
1.25
.049
1.25 .049
.019
1.25
.049
1.25
.049
2.54 2.54
.100 .100
2.54 2.54
.100 .100
Terminal thickness = 0.25 .010
General tolerance: 0.1 .004
PC board pattern (BOTTOM VIEW)
Recommended mounting pad (TOP VIEW)
5-0.8 dia.
5.08 .200
2.54 .100
5-.031 dia.
10.8
.425
1.9
6.4
.252
10.16
.400
.075
2.54
.100
1.5
.059
2.54 2.54
.100 .100
Tolerance: 0.1 .004
Tolerance: 0.1 .004
SCHEMATIC AND WIRING DIAGRAMS
Notes: E1: Power source at input side; IF: LED forward current; VL: Load voltage; IL: Load current
Output
configuration
Schematic
Load
Wiring diagram
1
2
4
3
ZC
Load
4
3
4
3
1
2
Zero-cross circuit
E1
I
F
VL (AC)
VL (AC)
1
2
4
3
Load
1 Form A
AC
1
2
3
6
4
Load
6
4
1
2
3
6
4
ZC
Zero-cross circuit
I
F
E1
VL (AC)
VL (AC)
1
2
3
6
4
Load
ASCTB217E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明