AXC81S41710 [PANASONIC]

Automation Controls Catalog;


型号：	AXC81S41710
厂家：	PANASONIC
描述：	Automation Controls Catalog
文件：	总10页 (文件大小：533K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Automation Controls Catalog

For board-to-micro coaxial wire

Micro coaxial connectors

(Space saving)

CS Series

2. “

” with strong resistance to

various environments provides high contact reliability and

facilitates connection work with tactile feedback.

Ni barrier construction

Bellows contact construction

(Against solder rise!)

(Against dropping!)

Plug

Receptacle

Porosity treatment

(Against corrosive

gases!)

RoHS compliant

FEATURES

1. Cable pitch of 0.25 mm helps reduce overall board space.

(Vertical mating type: 1.27 mm mated height and 2.81 mm

wide)

The two-row mating structure ensures insertion reliability.

The center island is resistant to problems related to plug/

receptacle mating.

V notch and Double contact constructions

(Against foreign particles and flux!)

3. Compatible wires: Coaxial AWG #44 to #46 (outer

diameter: 0.25 mm or less), AWG #38 (outer diameter: 0.32

mm or less, the #38-compatible plug only)

Plug (with cable)

Receptacle

Mated condition

APPLICATIONS

Tablets, laptops, mobile phones, digital still cameras and

digital video cameras.

Two-row

mating

structure

Island at

the center

Unit: mm

ORDERING INFORMATION

AXC

5: Receptacle

6: Plug

8: Plug attachment (Cover shell)

Mated type

1: Vertical

S: Slim type

No. of pins (2-digits)

Receptacle <Terminal pitch>

5: 0.5 mm

Plug <Cable pitch>

7: 0.25 mm

Function (Plug/Receptacle)

0: Signal wire only

4: #38 wire for power supply (Two both ends × 2 wires)

[Plug attachment only]

1: Plug cover shell

[Plug attachment only]

0: Signal wire only

4: #38 wire for power supply (Two both ends × 2 wires)

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

2013.11

–1–

Micro coaxial connectors CS

PRODUCT TYPES

1. Receptacle

Part number

Receptacle (Board side)

AXC51S2150

Packing

Inner carton (1-reel)

Mated height

Number of pins

Outer carton

10,000 pcs.

1.27mm

AXC51S4150

5,000 pcs.

AXC51S5150

2. Plug (unit)

Part number

Plug (Cable side)

AXC61S2174

AXC61S4174

AXC61S5170

Packing

Number of

pins

Mated height

#38-compatible

Inner carton (1-reel)

Outer carton

10,000 pcs.

Available (Each two both ends)

Not available

1.27mm

5,000 pcs.

3. Plug cover shell

Part number

Plug cover shell (Plug side)

AXC81S21714

Packing

Number of

pins

Mated height

#38-compatible

Inner carton (1-reel)

Outer carton

10,000 pcs.

Available

AXC81S41714

1.27mm

5,000 pcs.

Not available

AXC81S41710

AXC81S51710

Notes: 1. Order unit:

For volume production: 1-inner carton (1-reel) units

Samples for mounting check: 50-connector units. Please contact our sales ofﬁce.

2. Please contact us for connectors having a number of pins other than those listed above.

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–2–

Micro coaxial connectors CS

SPECIFICATIONS

1. Characteristics

Item

Speciﬁcations

Conditions

Maximum current that 1 pin contact can conduct.

(connector characteristic except cable)

Rated current

0.25A/terminal (Max. 4A at total pin contacts)

Rated voltage

Electrical

50V AC/DC

characteristics Insulation resistance

(Connector

Min. 1,000MΩ (initial)

Using 250 V DC megger (applied for 1 minute)

Rated voltage is applied for one minute and check for short

circuit or damage with a detection current of 1mA.

Breakdown voltage

90V AC for 1 minute

unit)

Signal: Max. 70mΩ (initial)

Ground: Max. 40mΩ (initial)

Contact resistance

Based on method of JIS C 5402

AWG #44, 46 (Outside diameter: 0.25mm or less)

AWG #38 (Outside diameter: 0.32mm or less)

Applicable electrical wire

#38-compatible plug only

Composite insertion force Max. 1.2 × No. of pins + 2.4N (initial)

Composite removal force Min. 0.165 × No. of pins + 0.33N

Holding force for terminal Contact: Min. 0.20N/terminal

Measured the maximum load applied until the press-ﬁt

terminals were removed in the axial direction.

Mechanical

characteristics

(Receptacle)

Shell: Min. 0.20N/point

When all wires bundled together are pulled, the mated joint

must not break.

Pulling direction: Wire leading direction

Min. 2.5N (Min. 21 pins)

Min. 5N (Min. 41 pins)

Wire tensile strength

Ambient temperature

Storage environment

–55°C to +85°C

–55°C to +85°C (Product unit)

–40°C to +50°C (Packing style)

No freezing at low temperatures. No dew condensation.

Conformed to MIL-STD-202F, method 107G

Order Temperature (°C) Time (minutes)

–55₋₃

Max. 5

Thermal shock resistance 5 cycles,

(Receptacle and plug

mated)

insulation resistance min. 100MΩ,

increment of contact resistance max. 40mΩ

85⁺³

Max. 5

Environmental

characteristics

–55₋₃

Humidity resistance

(Receptacle and plug

mated)

120 hours,

MIL-STD-1344A, METHOD 1002

Bath temperature 40 2°C, humidity 90 to 95% R.H.

insulation resistance min. 100MΩ,

increment of contact resistance max. 40mΩ

Saltwater spray resistance 24 hours,

MIL-STD-1344A, METHOD 1001

Bath temperature 35 2°C, saltwater concentration 5 1%

(Receptacle and plug

mated)

insulation resistance min. 100MΩ,

increment of contact resistance max. 40mΩ

H2S resistance

(Receptacle and plug

mated)

JEIDA-38-1984

Bath temperature 40 2°C, gas concentration 3 1 ppm,

humidity 75 to 80% R.H.

48 hours,

increment of contact resistance max. 40mΩ

Mechanical life: 30 times,

increment of contact resistance max. 40mΩ

Min. 0.165 composite removal force × No. of pins + 0.33N

Repeated insertion and removal speed of

max. 200 times/hours

Insertion and removal life

Reﬂow soldering: Max. peak temperature of 260°C, 2 cycles

(PC board surface temperature of near connector terminals)

Soldering iron: 350°C within 3s, 300°C within 5s

Initial electrical and mechanical characteristics must be

maintained.

Receptacle

Resistance to

soldering heat

Connecting wires portion pulse heat:

Max. peak temperature of 300°C, 3s

(Don’t touch the heater head to molded portion)

Plug cover shell soldering portion:

Initial electrical and mechanical characteristics must be

maintained.

Plug

Soldering iron: 350°C within 3s, 300°C within 5s

2. Material and surface treatment

1. Receptacle

Part name

Material

Color

Black

Surface treatment

—

Molded portion

LCP resin (UL 94V-0)

Contact portion: Ni plating on base, Au plating on surface (Min. 0.1µm)

Contact

Shell

Copper alloy

—

Soldering portion: Ni plating on base, Au plating on surface (Except for front edge of terminal)

Contact portion: Ni plating on base, Au plating on surface

Soldering portion: Ni plating on base, Au plating on surface (Except for front edge of terminal)

2. Plug

Part name

Material

Color

Black

Surface treatment

—

Molded portion

LCP resin (UL 94V-0)

Contact portion:

Soldering wire portion: Ni plating on base, Au plating on surface

Ni plating on base, Au plating on surface (Min. 0.1µm)

Post

Copper alloy

—

Insert shell

Ni plating

3. Plug cover shell

Part name

Material

Color

—

Surface treatment

Shell

Copper alloy

Ni plating on base, Au plating on surface

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–3–

Micro coaxial connectors CS

DIMENSIONS (Unit: mm)

• Receptacle

B 0.10

Terminal coplanarity

0.08

0.50 0.03

0.20 0.03

1.20

(Contact and shell

terminals bent to 90°)

0.45 0.03

0.25 0.03

C 0.10

D 0.10

Terminal coplanarity

0.10

(End face edges of

the four corners of the shell)

Not soldering portion

of the four corners

only 51 pins

X-X cross section Y-Y cross section

0.44 0.03

E 0.12

Dimension table (mm)

Number of pins/

General tolerance: 0.2

dimension

9.80

5.00

4.50

6.25

9.34

14.80 10.00

9.50 11.25 14.34

17.30 12.50 12.00 13.75 16.84

• Plug (unit) 21, 41 pin contacts

AXC61S2174

AXC61S4174

C 0.1

(1.11)

0.49

E 0.05

0.14 0.03 (Terminal width)

0.49

(0.5)

0.25 0.04

+0.15

−0.05

X-X cross section

(0.10)

0.21

0.48

0.28

0.37

0.31

0.35

Y-Y cross section

Dimension table (mm)

Number of pins/

General tolerance: 0.2

dimension

10.60

7.08

6.68

5.45

5.00

5.45

6.50

9.22

6.28

9.20

5.88

15.60 12.08 11.68 10.45 10.00 10.45 11.50 14.22 11.28 14.20 10.88

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–4–

Micro coaxial connectors CS

• Plug (assembled condition) 21, 41 pin contacts (#38 wire for power supply)

Regarding cable pattern, please refer to “Notes”.

1.11

Cover shell

0.62

0.28

0.67

Soldering portion

0.25

0.50

X-X cross section

Y-Y cross section

Dimension table (mm)

General tolerance: 0.2

Number of pins/

dimension

10.60

7.08

2.40

7.40

3.00

9.20

6.00

4.75

9.75

15.60 12.08

8.00 14.20 11.00

• Plug cover shell 21, 41 pin contacts

AXC81S21714

AXC81S41714

0.97

1.10

0.40

0.30

0.67

Dimension table (mm)

Number of pins/

dimension

9.00

6.86

2.40

7.40

0.65

0.90

14.00 11.86

General tolerance: 0.2

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–5–

Micro coaxial connectors CS

• Plug (unit) 51 pin contacts

AXC61S5170

18.10

14.58

14.18 0.1

12.95

(1.11)

0.49

12.50 0.05

0.14 0.03 (Terminal width)

0.49

0.25 0.04

12.95

14.00

14.58

+0.15

−0.05

X-X cross section

16.72

(0.10)

0.21

0.48

13.78

16.70

0.28

0.35

0.31

0.35

0.31

Y-Y cross section

13.38

General tolerance: 0.2

• Plug (assembled condition)

41 pin contacts

51 pin contacts (signal wire only)

Regarding cable pattern, please refer to

“Notes”.

1.11

Cover shell

0.62

0.28

0.67

0.25

Soldering portion

X-X cross section

Dimension table (mm)

Number of pins/

Y-Y cross section

dimension

15.60 12.08

18.10 14.58

7.40 10.00 14.20

9.90 12.50 16.70

General tolerance: 0.2

• Plug cover shell 41 pin contacts/51 pin contacts

AXC81S41710

AXC81S51710

0.97

1.10

0.40

0.30

0.67

Dimension table (mm)

Number of pins/

dimension

14.00 11.86

16.50 14.36

7.40

9.90

0.65

0.90

General tolerance: 0.2

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–6–

Micro coaxial connectors CS

• Receptacle and Plug are mated

(0.99)

1.27 0.2

Plug

Receptacle

EMBOSSED TAPE DIMENSIONS (Unit: mm)

• Tape dimensions

• Plastic reel dimensions (Conforming to EIAJ ET-7200B)

Tape I

Tape II

(A 0.3)

(B 0.1)

+0.3

)

−0.1

(D 1.0)

Taping reel

Top cover tape

(C 0.1)

(1.75 0.1)

Embossed carrier tape

Embossed mounting-hole

Label

• Dimension table (Unit: mm)

Number of pins

Type

Type of taping

Receptacle

21, 41, 51

–

Plug

Tape I

24.0

32.0

–

11.5

14.2

25.4

33.4

Common for

receptacle and plug

41, 51

Tape II

28.4

• Metal hoop reel dimensions (Plug cover shell)

• Plastic reel dimensions (Conforming to EIAJ ET-7200B)

(A)

(B)

(C 1.0)

Taping reel

(2.25)

(1.20)

Interlayer sheet

Cover shell

Label

Dimension table (mm)

Number of pins/

dimension

15.5

20.5

23.0

13.0

18.0

20.5

17.4

25.4

• Connector orientation with respect to direction of progress of embossed tape

Type

Direction

Micro coaxial connector CS

of tape progress

Receptacle

Plug (unit)

Plug cover shell

Please refer to the latest product

speciﬁcations when designing your

product.

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB21E 201310-T

–7–

Notes on Using Micro Coaxial Connectors

NOTES (Unit: mm)

ꢀ Safety precautions

• Soldering

Observe the following safety precautions to prevent accidents

1) Manual soldering.

and injuries.

• Since this connector is the low proﬁle type the amount of solder

supplied should be closely monitored.

Too much solder during manual soldering may cause solder

creeping near the contacting part or a short circuit with the shell

(GND).

• Make sure that the soldering iron tip is heated within the

temperature and time limits indicated in the speciﬁcations.

• Flux from the solder wire may adhere to the contact surfaces

during soldering operations. After soldering, carefully check the

contact surfaces and clean off any ﬂux before use.

• Be aware that a load applied to the connector terminals while

soldering may displace the contact.

1) The use of the connector outside of the speciﬁed rated current

and breakdown voltage ranges may cause abnormal heating,

smoke, and ﬁre.

Never use the connector beyond the speciﬁed ranges of the

product.

2) In order to avoid accidents, make sure you have thoroughly

reviewed the speciﬁcations before use.

Consult us if you plan to use the product in a way not covered by

the speciﬁcations.

3) We are consistently striving to improve quality and reliability.

However, the fact remains that electrical components and

devices generally fail at a given statistical probability.

Furthermore, their durability varies depending on where and

how they are used. Please be sure to verify electrical

components and devices under actual conditions before use.

Continuously using them in a state of degraded performance

may cause deterioration in insulation performance, thus

resulting in abnormal heat generation, smoke generation, or ﬁre.

To avoid that, we ask you to implement safe designs that include

redundancy, ﬁre prevention, and malfunction prevention. Also,

please conduct periodic maintenance so that no accidents

resulting in injury or death, ﬁre, or harm to society will be caused

as a result of product failure or service life.

• Thoroughly clean the iron tip.

CS series

• Receptacle

Recommended PC board pattern (mounting pad layout)

(Top view)

0.05

0.50 0.03

0.25 0.03

ꢀ About plug

The plug of this product is wired by soldering the 0.25 mm pitch

(CS)/0.4 mm pitch (CF) cable.

0.25 0.03

0.05

If you will be harnessing, carry it out based on the separately

attached “Plug Assembly Procedures”. Make sure to get familiar

with and observe all the precautions in the procedures.

Note: If you would like “Plug Assembly Procedures”, please

inquire at one of our sales ofﬁces.

• Caution regarding harness handling procedures.

To prevent the cable from being severed and to prevent damage

to the product, please handle carefully making sure not to apply

undue stress to the base of the cable after connecting it and

after mating the connector.

Insulation

Recommended window size of metal mask

Metal mask thickness: When 120µm

(Signal terminal portion opening area ratio: 60%)

(GND terminal portion opening area ratio: 70%)

(Shell edge terminal portion at four corners opening area ratio: 60%)

0.03

0.50 0.01

0.22 0.01

• Caution regarding harness design

To prevent the cable from being severed and to prevent damage

to the product, please place and secure the cable in a way that

prevents the base of the cable from becoming stressed.

ꢀ About receptacle

• PC board design

0.03

Design the recommended foot pattern in order to secure the

mechanical strength in the soldered areas of the terminal.

• About (CF)

Use all the soldering terminals as GND for connecting GND

stably.

Dimension table (mm)

Numberof

pins/

dimension

7.05 5.75 5.00 4.50 7.40 8.90 9.98 6.85 9.16

12.05 10.75 10.00 9.50 12.40 13.90 14.98 11.85 14.16

14.55 13.25 12.50 12.00 14.90 16.40 17.48 14.35 16.66

• Connector mounting

When mounting, if there is too much suction nozzle pressure,

the molded and metal parts might deform and break.

Please check beforehand.

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB12E 201303-T

–8–

Notes on Using Micro Coaxial Connectors

• Plug

Recommended cable pattern

21, 41 pin contacts (#38 wire for power supply)

Recommended cable pattern

0.1

0.40 0.05

0.31 0.03

0.1

#44

(fine diameter)

or #46

0.50 0.05

0.35 0.03

0.1

#38 (Each of

the two ends)

0.25 0.05

View Y

View Z

Dimension table (mm)

Number of pins/dimension

Dimension table (mm)

15.60 16.60

Number of pins/dimension

4.75

6.00 3.00

2) Reﬂow soldering

9.75 11.00 8.00

• Screen-printing is recommended for printing paste solder.

• To determine the relationship between the screen opening area

and the PC board foot pattern area, refer to the diagrams in the

recommended patterns for PC boards and metal masks.

Make sure to use the terminal tip as a reference position when

setting.

41 pin contacts/51 pin contacts (signal wire only)

Recommended cable pattern

0.1

0.25 0.05

0.03

• Too much solder may cause solder creeping near the

contacting part or a short circuit with the shell (GND).

Terminal

Paste

solder

View Z'

PC board

foot pattern

Dimension table (mm)

Number of pins/dimension

10.00 11.00 0.34

12.50 13.50 0.31

• Consult us when using a screen-printing thickness other than

that recommended.

• Depending on the size of the connector being used, self

alignment may not be possible. Accordingly, carefully position

the terminal with the PC board pattern.

CF series

• Receptacle

• The recommended reﬂow temperature proﬁle is given in the

ﬁgure below

Recommended PC board pattern (mounting pad layout)

0.05

Upper limit (Soldering heat resistance)

Lower limit (Solder wettability)

0.40 0.03

0.23 0.03

Temperature

Peak temperature

260°C

230°C

220°C

200°C

Preheating

180°C

150°C

25 sec.

70 sec.

Insulation

60 to 120 sec.

Insulation

0.90 0.03

Insulation

GND connection

(4 places)

Time

• The temperature is measured on the surface of the PC board

near the connector terminal.

• Certain solder and ﬂux types may cause serious solder

creeping.

Solder and ﬂux characteristics should be taken into

consideration when setting the reﬂow soldering conditions.

• Do not apply adhesive to secure the connector, because it can

affect the spring action of the contact.

• When coating the PC board after soldering the connector to

prevent the deterioration of insulation, perform the coating in

such a way so that the coating does not get on the connector.

3) Reworking on a soldered portion

Recommended window size of metal mask

Metal mask thickness: When 120µm

(Signal terminal portion opening area ratio: 70%)

(GND terminal portion opening area ratio: 80%)

0.05

0.40 0.03

0.21 0.02

• Finish reworking in one operation.

0.03

• For reworking of the solder bridge, use a soldering iron with a

ﬂat tip. Do not add ﬂux, otherwise, the ﬂux may creep to the

contact parts.

• Use a soldering iron whose tip temperature is within the

temperature range speciﬁed in the speciﬁcations.

Dimension table (mm)

Number of pins/dimension

19.10 15.60 18.20 20.00

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB12E 201303-T

–9–

Notes on Using Micro Coaxial Connectors

4) Others

ꢀ Other Notes

• Do not drop or handle the connector carelessly. Otherwise, the

terminals may become deformed due to excessive force or

applied solderability may degrade.

• When cutting or bending the PC board after mounting the

connector, be careful that the soldered sections are subjected to

excessive forces.

The connectors are not meant to be used for switching.

Please refer to the latest product speciﬁcations

when designing your product.

ꢀ Insertion / Removal and mating retention of connectors

• Do not insert or remove the connector when it is not soldered.

Also, forcibly applied external pressure on the terminals can

weaken the adherence of the terminals to the molded part or

cause the terminals to lose their evenness.

• Excessive prying-force applied to one end may cause product

breakage and separation of the solder joints at the terminal.

Excessive force applied for insertion in a pivot action as shown

may also cause product breakage.

Always align the connector with the mating part and slide it in

parallel.

Plug

Cable

Receptacle

• Pushing the plug excessively when inserting it may deform and

break the product.

• This product has a simple lock structure for mating. However,

connectors may become unmated due to cable weigh, cable

reactive force, and impact by dropping, etc. Please take

measures to prevent inadvertent connector disconnections at

the equipment side.

• When removing the connector, do not pull the cable to avoid

damaging the product.

Insert the tip of the removal jig under the ﬂange of the plug and

lift the jig straight up as shown below. (Removable from either

the left or right side.) We recommend a tip thickness of 0.4 0.03

mm (CS), 0.2 0.03 mm (CF).

• CS

Removal

jig

Flange

Plug

Lift

straight up

0.4 0.03

Receptacle

Tip

Removal jig

Plug

• CF

Removal

jig

Receptacle

0.2 0.03

Cable

Tip

Panasonic Corporation Automation Controls Buisiness Division

industrial.panasonic.com/ac/e/

ACCTB12E 201303-T

–10–

AXC81S41710 [PANASONIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E