AXK5S70245P_技术文档

AXK(5(S)/6(S))

NARROW-PITCH

CONNECTORS FOR

BOARD-TO-BOARD

CONNECTION

NARROW PITCH

(0.5mm) CONNECTORS

P5 SERIES — P5K, P5KS —

• P5K

2) V notch construction used for excellent

resistance against foreign matters.

(P5KS: Available from Nov. 2005)

3. Even with the low proﬁle, the

effective mating length has been

extended to ensure that there is some

latitude in the mating.

ꢀ What is V notch construction?

Socket

Header

With long effective

mating lengths, even

if the connection is

not perfect, the

electrical connection

is more than enough

for normal operations.

By using the edge for the contacting part

and increasing contact pressure per unit

area, the effectiveness in removing flux

and contaminants is increased compared

to its predecessor. This is also effective in

preventing the trapping of contaminants.

Effective mating length

• P5KS

[Cross section of contacting part]

Type

P5K

Effective mating length

Without notch

With V notch

0.75 mm

1.0 mm

Socket side contact cross section

Header

P5KS

Note) The external appearance and PC board pattern

differs for the P5K and P5KS series.

4. Automatic mounting

1) Suction area for suction-type

automatic mounting machines is

employed.

Header side contact cross section

FEATURES

3) Use of Ni barrier construction is

standard. Highly effective against solder

creeping.

1.The product lineup consists of

3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm,

5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm,

7.0 mm, 8.0 mm, and 9.0 mm.

Suction face

(P5KS: Available from Nov. 2005)

Type

Mated height

Notes

ꢀ What is Ni barrier construction?

P5K

3 mm, 3.5 mm

By providing an exposed nickel part on the

gold (Au) plated contact, solder creeping is

prevented despite the ultra low profile.

The external

4 mm, 4.5 mm,

5 mm, 5.5 mm,

6 mm, 6.5 mm,

7 mm, 8 mm,

9 mm

appearance and

PC board pattern

differs for the P5K

and P5KS series.

P5K Header

P5K Socket

P5KS

5. Compliance with RoHS’ Directive

Environmentally friendly, the connectors’

comply with Europe’s RoHS’ Directive.

Cadmium, lead, mercury, hexavalent,

chromium, PBB and PBDE are not used.

[Contact]

Header side contact

Ni barrier

Cu Ni Au

2. Strong resistance to adverse

environments! Utilizes

construction

for high contact reliability.

Exposed

Ni part

Cross section of

socket side contact

P5K

P5KS

APPLICATIONS

Socket side contact

Bellows contact

construction

1. Mobile phones, PHS, mobile info-

communications terminals, and other

small portable devices

ꢀ

Note: Construction makes solder creeping difficult

because header side is formed at the same time.

ꢀ

Note)

V notch construction

Ni barrier construction

Porosity treatment

—

ꢀ

2.The 160-contacts connector:

This connector is particularly suited to

the motherboard, CPU board, and other

multi-pin expansion boards on notebook

PCs and other info-communications

applications.

4) Porosity treatment applied for

improved resistance against corrosion.

ꢀ

Note)

ꢀ

What is porosity treatment?

Note: P5KS will support V notch and Ni barrier from

November, 2005, and will have TOUGH

CONTACT construction.

This treatment consists of coating the

surface with a very thin film to seal pinholes

in the gold plating. This porosity treatment

technology ensures the same contact

reliability for thin gold plating as that of thick

gold plating.

1) Contacts are highly resistant to shock

caused by dropping and employ our

original bellows contact construction.

Porosity treatment film

Pinholes

Surrounding gas

• What is meant by “bellows type” contact?

Rather than two broken-out surfaces, the contact is

formed by the surfaces of two rolled plates. This

helps the contact hold up better to repeated

insertions and removals, while at the same time

achieving highly reliable contact.

Au plating

CPU boards and

other multi-pin

expansion boards.

Ni plating

The roll surfaces

are in contact

with each other,

providing high

contact reliability.

Since the contact is

formed by bending

thin plate, it has a

spring-like quality.

This construction

helps make it resist-

ant to dropping and

twisting.

Base material

ꢀ

Improvement in insertion/removal durability

Improvement in resistance to corrosion

Improvement in contact reliability for digital signals

Mother board

AXK(5(S)/6(S))

TABLE OF PRODUCT TYPES

Socket

Header

Socket

Header

P5K

P5KS

Product name

P5K

P5KS

9.0mm

8.0mm

7.0mm

6.5mm

Mated

height

6.0mm

5.5mm

5.0mm

4.5mm

4.0mm

3.5mm

3.0mm

20

22

✩

24

✩

30

✩

34

36

✩

40

✩

50

60

70

80

100

120

130

160

✩

Notes: 1. The standard type comes without positioning bosses. (Positioning bosses come standard on types with

4.0 mm and 4.5 mm mated height with 120 and 160 contacts, and 6.5 mm mated height with 130 contacts.)

Connectors with positioning boss are available for on-demand production.

2. Please consult us for products which have no ✩ mark.

ORDERING INFORMATION

1. P5K (3.0 mm and 3.5 mm)

AXK

5: Narrow Pitch Connector P5K Socket

6: Narrow Pitch Connector P5K Header

Number of contacts (2 digits)

Mated height

1: For mated height 3.0 mm and 3.5 mm

2: For mated height 3.5 mm

3: For mated height 3.0 mm

Functions

3: With positioning bosses

4: Without positioning bosses

Surface treatment (Contact portion / Terminal portion)

5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

Packing

J: 1,500 pieces embossed tape and paper reel × 2

P: 1,000 pieces embossed tape and paper reel × 2

AXK(5(S)/6(S))

2. P5KS (4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm and 9.0 mm)

AXK

5S: Narrow Pitch Connector P5KS Socket

6S: Narrow Pitch Connector P5KS Header

Number of contacts (2 digits)

Mated height

0: For mated height 4.0 mm, 5.0 mm and 6.0 mm

2: For mated height 4.5 mm, 5.5 mm and 6.5 mm

3: For mated height 7.0 mm, 8.0 mm and 9.0 mm

4: For mated height 4.0 mm, 4.5 mm and 7.0 mm

5: For mated height 5.0 mm, 5.5 mm and 8.0 mm

6: For mated height 6.0 mm, 6.5 mm and 9.0 mm

Functions

3: With positioning boss and direction for protection from reverse mating

4: Without positioning boss/with direction for protection from reverse mating

7: With positioning boss/without direction for protection from reverse mating

8: Without positioning boss and direction for protection from reverse mating

Surface treatment (Contact portion / Terminal portion)

0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

(Previous model: Ni plating on base, SnPb plating on surface of terminal portion)

5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

(for Ni barrier product available from Nov. 2005)

Contact portion

Nil: Without V notch product

Y: V notch type product (chamfered on both sides) (Available from Nov. 2005)

Nil: Without V notch product

Y: V notch type product (Available from Nov. 2005)

Packing

G: 1,500 pieces embossed tape and plastic reel × 2

Socket: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm

Header: Mated heights 4.0 mm, 4.5 mm, 7.0 mm

1,000 pieces plastic reel × 2

Socket: Mated heights 7.0 mm, 8.0 mm, 9.0 mm

Header: Mated heights 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 8.0 mm, 9.0 mm

J: 1,500 pieces embossed tape and paper reel × 2

P: 1,000 pieces embossed tape and paper reel × 2

Notes: 1. Models with mating directionality to prevent reverse insertion have over 100 contacts. Models without mating directionality to prevent

reverse insertion have less than 100 contacts.

2. The plating on the solder terminal portion has changed from SnPb to Au plating from the production lot of December, 2002,

in order to eliminate lead.

3. Only “J” and “P” are supported as packaging specifications for models without Ni barrier. The packaging specification for Ni barrier

models is “G” only.

Models possible for “J” are as follows:

Sockets: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 6.5 mm

Headers: Mated heights 4.0 mm, 4.5 mm, and 7.0 mm

AXK(5(S)/6(S))

PRODUCT TYPES

1. P5K

Part No.

Packing

Inner carton (1 reel)

Product

name

Mated

height

No. of

contacts

Socket

Header

Outer carton

20

22

AXK520145J

AXK522145J

AXK530145J

AXK540145J

AXK550145J

AXK560145J

AXK570145J

AXK580145J

AXK500145J

AXK5A2145J

AXK520145J

AXK522145J

AXK530145J

AXK540145J

AXK550145J

AXK560145J

AXK570145J

AXK580145J

AXK500145J

AXK5A2145J

AXK620345J

AXK622345J

AXK630345J

AXK640345J

AXK650345J

AXK660345J

AXK670345J

AXK680345J

AXK600345J

AXK6A2345J

AXK620245J

AXK622245J

AXK630245J

AXK640245J

AXK650245J

AXK660245J

AXK670245J

AXK680245J

AXK600245J

AXK6A2245J

30

40

50

3.0 mm

60

70

80

100

120

20

P5K

1,500 pieces^{Note 1)}

3,000 pieces^{Note 1)}

22

30

40

50

3.5 mm

60

70

80

100

120

Notes) 1. For the protection of our environment, orders of J: Inner carton (1 reel) 1,500 pcs. units are recommended to reduce packaging materials.

In addition, orders of P: Inner carton (1 reel) 1,000 pcs. units with embossed tape packaging are also available; to order change the sufﬁx “J” to the sufﬁx “P.”

2. Regarding ordering units: During production: Please make orders in 1 reel units.

Samples for mounting conﬁrmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to conﬁrm proper mounting” on page 13.)

Samples: Small lot orders are possible. Change the sufﬁx “J” to the sufﬁx “P”.

3. The standard type comes without positioning bosses.

Connectors with positioning bosses are available on-demand production. For P5K type of 8th digit of the part no. changes from 4 to 3.

e.g. Mated height 3.0 mm, 20 contacts for sockets: AXK520135P

AXK(5(S)/6(S))

2. P5KS

Part No.

Packing

Socket

Without V notch

Header

Product

name

Mated

height

No. of

contacts

Without V notch

Inner carton (1 reel)

Outer carton

and Ni barrier

product

and Ni barrier

product

(Paper reel)

(Recommendation)

(Paper reel)

AXK5S20047YG

(From Nov. 2005)

AXK6S20447YG

(From Nov. 2005)

20

24

AXK5S20045*

AXK5S24045*

AXK5S30045*

AXK5S40045*

AXK5S50045*

AXK5S60045*

AXK5S70045*

AXK5S80045*

AXK5S00045*

AXK5SA2075*

AXK5SA6075*

AXK5S20245*

AXK5S24245*

AXK5S30245*

AXK5S36245*

AXK5S40245*

AXK5S50245*

AXK5S60245*

AXK5S70245*

AXK5S80245*

AXK5S00245*

AXK5SA2275*

AXK5SA6275*

AXK5S20045*

AXK5S30045*

AXK5S34045*

AXK5S40045*

AXK5S50045*

AXK5S60045*

AXK5S70045*

AXK5S80045*

AXK5S00045*

AXK6S20445*

AXK6S24445*

AXK6S30445*

AXK6S40445*

AXK6S50445*

AXK6S60445*

AXK6S70445*

AXK6S80445*

AXK6S00445*

AXK6SA2475*

AXK6SA6475*

AXK6S20445*

AXK6S24445*

AXK6S30445*

AXK6S36445*

AXK6S40445*

AXK6S50445*

AXK6S60445*

AXK6S70445*

AXK6S80445*

AXK6S00445*

AXK6SA2475*

AXK6SA6475*

AXK6S20545P

AXK6S30545P

AXK6S34545P

AXK6S40545P

AXK6S50545P

AXK6S60545P

AXK6S70545P

AXK6S80545P

AXK6S00545P

AXK5S24047YG

(From Nov. 2005)

AXK6S24447YG

(From Nov. 2005)

AXK5S30047YG

(From Nov. 2005)

AXK6S30447YG

(From Nov. 2005)

30

AXK5S40047YG

(From Nov. 2005)

AXK6S40447YG

(From Nov. 2005)

40

AXK5S50047YG

(From Nov. 2005)

AXK6S50447YG

(From Nov. 2005)

50

AXK5S60047YG

(From Nov. 2005)

AXK6S60447YG

(From Nov. 2005)

4.0 mm

60

AXK5S70047YG

(From Nov. 2005)

AXK6S70447YG

(From Nov. 2005)

70

AXK5S80047YG

(From Nov. 2005)

AXK6S80447YG

(From Nov. 2005)

80

AXK5S00047YG

(From Nov. 2005)

AXK6S00447YG

(From Nov. 2005)

100

120

160

20

AXK5SA2077YG

(From Nov. 2005)

AXK6SA2477YG

(From Nov. 2005)

Note 2)

“Asterisk” mark on

end of part No.;

J: 1,500 pieces

P: 1,000 pieces

“Asterisk” mark on

end of part No.;

J: 3,000 pieces

P: 2,000 pieces

AXK5SA6077YG

(From Nov. 2005)

AXK6SA6477YG

(From Nov. 2005)

AXK5S20247YG

(From Nov. 2005)

AXK6S20447YG

(From Nov. 2005)

AXK5S24247YG

(From Nov. 2005)

AXK6S24447YG

(From Nov. 2005)

“G” mark on end of

part No.;

1,500 pieces

“G” mark on end of

part No.;

3,000 pieces

24

AXK5S30247YG

(From Nov. 2005)

AXK6S30447YG

(From Nov. 2005)

30

AXK5S36247YG

(From Nov. 2005)

AXK6S36447YG

(From Nov. 2005)

36

AXK5S40247YG

(From Nov. 2005)

AXK6S40447YG

(From Nov. 2005)

40

P5KS

AXK5S50247YG

(From Nov. 2005)

AXK6S50447YG

(From Nov. 2005)

50

4.5 mm

AXK5S60247YG

(From Nov. 2005)

AXK6S60447YG

(From Nov. 2005)

60

AXK5S70247YG

(From Nov. 2005)

AXK6S70447YG

(From Nov. 2005)

70

AXK5S80247YG

(From Nov. 2005)

AXK6S80447YG

(From Nov. 2005)

80

AXK5S00247YG

(From Nov. 2005)

AXK6S00447YG

(From Nov. 2005)

100

120

160

20

AXK5SA2277YG

(From Nov. 2005)

AXK6SA2477YG

(From Nov. 2005)

AXK5SA6277YG

(From Nov. 2005)

AXK6SA6477YG

(From Nov. 2005)

AXK5S20047YG

(From Nov. 2005)

AXK6S20547YG

(From Nov. 2005)

AXK5S30047YG

(From Nov. 2005)

AXK6S30547YG

(From Nov. 2005)

30

AXK5S34047YG

(From Nov. 2005)

AXK6S34547YG

(From Nov. 2005)

34

Note 2)

“Asterisk” mark on

end of part No.;

J: 1,500 pieces

P: 1,000 pieces

“Asterisk” mark on

end of part No.;

J: 3,000 pieces

P: 2,000 pieces

AXK5S40047YG

(From Nov. 2005)

AXK6S40547YG

(From Nov. 2005)

40

AXK5S50047YG

(From Nov. 2005)

AXK6S50547YG

(From Nov. 2005)

5.0 mm

50

“G” mark on end of

part No.;

“G” mark on end of

part No.;

AXK5S60047YG

(From Nov. 2005)

AXK6S60547YG

(From Nov. 2005)

60

Socket: 1,500 pieces Socket: 3,000 pieces

Header: 1,000 pieces Header: 2,000 pieces

AXK5S70047YG

(From Nov. 2005)

AXK6S70547YG

(From Nov. 2005)

70

AXK5S80047YG

(From Nov. 2005)

AXK6S80547YG

(From Nov. 2005)

80

AXK5S00047YG

(From Nov. 2005)

AXK6S00547YG

(From Nov. 2005)

100

AXK(5(S)/6(S))

Part No.

Packing

Socket

Without V notch

Header

Product

name

Mated

height

No. of

contacts

Without V notch

Inner carton (1 reel)

Outer carton

and Ni barrier

product

and Ni barrier

product

(Paper reel)

(Recommendation)

(Paper reel)

AXK5S20247YG

(From Nov. 2005)

AXK6S20547YG

(From Nov. 2005)

20

30

34

40

50

60

70

80

100

20

30

40

50

60

70

80

100

20

30

40

50

60

70

80

100

130

20

30

40

50

60

70

80

100

AXK5S20245*

AXK5S30245*

AXK5S34245*

AXK5S40245*

AXK5S50245*

AXK5S60245*

AXK5S70245*

AXK5S80245*

AXK5S00245*

AXK5S20045*

AXK5S30045*

AXK5S40045*

AXK5S50045*

AXK5S60045*

AXK5S70045*

AXK5S80045*

AXK5S00045*

AXK5S20245*

AXK5S30245*

AXK5S40245*

AXK5S50245*

AXK5S60245*

AXK5S70245*

AXK5S80245*

AXK5S00245*

AXK5SA3275*

AXK5S20340P

AXK5S30340P

AXK5S40340P

AXK5S50340P

AXK5S60340P

AXK5S70340P

AXK5S80340P

AXK5S00340P

AXK6S20545P

AXK6S30545P

AXK6S34545P

AXK6S40545P

AXK6S50545P

AXK6S60545P

AXK6S70545P

AXK6S80545P

AXK6S00545P

AXK6S20645P

AXK6S30645P

AXK6S40645P

AXK6S50645P

AXK6S60645P

AXK6S70645P

AXK6S80645P

AXK6S00645P

AXK6S20645P

AXK6S30645P

AXK6S40645P

AXK6S50645P

AXK6S60645P

AXK6S70645P

AXK6S80645P

AXK6S00645P

AXK6SA3675P

AXK6S20445*

AXK6S30445*

AXK6S40445*

AXK6S50445*

AXK6S60445*

AXK6S70445*

AXK6S80445*

AXK6S00445*

AXK5S30247YG

(From Nov. 2005)

AXK6S30547YG

(From Nov. 2005)

AXK5S34247YG

(From Nov. 2005)

AXK6S34547YG

(From Nov. 2005)

AXK5S40247YG

(From Nov. 2005)

AXK6S40547YG

(From Nov. 2005)

AXK5S50247YG

(From Nov. 2005)

AXK6S50547YG

(From Nov. 2005)

5.5 mm

6.0 mm

6.5 mm

7.0 mm

AXK5S60247YG

(From Nov. 2005)

AXK6S60547YG

(From Nov. 2005)

AXK5S70247YG

(From Nov. 2005)

AXK6S70547YG

(From Nov. 2005)

AXK5S80247YG

(From Nov. 2005)

AXK6S80547YG

(From Nov. 2005)

AXK5S00247YG

(From Nov. 2005)

AXK6S00547YG

(From Nov. 2005)

AXK5S20047YG

(From Nov. 2005)

AXK6S20647YG

(From Nov. 2005)

AXK5S30047YG

(From Nov. 2005)

AXK6S30647YG

(From Nov. 2005)

Note 2)

AXK5S40047YG

(From Nov. 2005)

AXK6S40647YG

(From Nov. 2005)

“Asterisk” mark on

end of part No.;

J: 1,500 pieces

P: 1,000 pieces

“Asterisk” mark on

end of part No.;

J: 3,000 pieces

P: 2,000 pieces

AXK5S50047YG

(From Nov. 2005)

AXK6S50647YG

(From Nov. 2005)

AXK5S60047YG

(From Nov. 2005)

AXK6S60647YG

(From Nov. 2005)

“G” mark on end of

part No.;

Socket: 1,500 pieces Socket: 3,000 pieces

Header: 1,000 pieces Header: 2,000 pieces

“G” mark on end of

part No.;

AXK5S70047YG

(From Nov. 2005)

AXK6S70647YG

(From Nov. 2005)

AXK5S80047YG

(From Nov. 2005)

AXK6S80647YG

(From Nov. 2005)

AXK5S00047YG

(From Nov. 2005)

AXK6S00647YG

(From Nov. 2005)

P5KS

AXK5S20247YG

(From Nov. 2005)

AXK6S20647YG

(From Nov. 2005)

AXK5S30247YG

(From Nov. 2005)

AXK6S30647YG

(From Nov. 2005)

AXK5S40247YG

(From Nov. 2005)

AXK6S40647YG

(From Nov. 2005)

AXK5S50247YG

(From Nov. 2005)

AXK6S50647YG

(From Nov. 2005)

AXK5S60247YG

(From Nov. 2005)

AXK6S60647YG

(From Nov. 2005)

AXK5S70247YG

(From Nov. 2005)

AXK6S70647YG

(From Nov. 2005)

AXK5S80247YG

(From Nov. 2005)

AXK6S80647YG

(From Nov. 2005)

AXK5S00247YG

(From Nov. 2005)

AXK6S00647YG

(From Nov. 2005)

AXK5SA3277YG

(From Nov. 2005)

AXK6SA3677YG

(From Nov. 2005)

AXK5S20347YG

(From Nov. 2005)

AXK6S20447YG

(From Nov. 2005)

AXK5S30347YG

(From Nov. 2005)

AXK6S30447YG

(From Nov. 2005)

Note 2)

AXK5S40347YG

(From Nov. 2005)

AXK6S40447YG

(From Nov. 2005)

“Asterisk” mark on

end of part No.;

J: 1,500 pieces

P: 1,000 pieces

“Asterisk” mark on

end of part No.;

J: 3,000 pieces

P: 2,000 pieces

AXK5S50347YG

(From Nov. 2005)

AXK6S50447YG

(From Nov. 2005)

AXK5S60347YG

(From Nov. 2005)

AXK6S60447YG

(From Nov. 2005)

“G” mark on end of

part No.;

“G” mark on end of

part No.;

AXK5S70347YG

(From Nov. 2005)

AXK6S70447YG

(From Nov. 2005)

Socket: 1,000 pieces Socket: 2,000 pieces

Header: 1,500 pieces Header: 3,000 pieces

AXK5S80347YG

(From Nov. 2005)

AXK6S80447YG

(From Nov. 2005)

AXK5S00347YG

(From Nov. 2005)

AXK6S00447YG

(From Nov. 2005)

AXK(5(S)/6(S))

Part No.

Packing

Socket

Without V notch

Header

Product

name

Mated

height

No. of

contacts

Without V notch

Inner carton (1 reel)

Outer carton

and Ni barrier

product

and Ni barrier

product

(Paper reel)

(Recommendation)

(Paper reel)

AXK5S20347YG

(From Nov. 2005)

AXK6S20547YG

(From Nov. 2005)

20

30

40

50

60

70

80

100

20

30

40

50

60

70

80

100

AXK5S20340P

AXK5S30340P

AXK5S40340P

AXK5S50340P

AXK5S60340P

AXK5S70340P

AXK5S80340P

AXK5S00340P

AXK5S20340P

AXK5S30340P

AXK5S40340P

AXK5S50340P

AXK5S60340P

AXK5S70340P

AXK5S80340P

AXK5S00340P

AXK6S20545P

AXK6S30545P

AXK6S40545P

AXK6S50545P

AXK6S60545P

AXK6S70545P

AXK6S80545P

AXK6S00545P

AXK6S20645P

AXK6S30645P

AXK6S40645P

AXK6S50645P

AXK6S60645P

AXK6S70645P

AXK6S80645P

AXK6S00645P

AXK5S30347YG

(From Nov. 2005)

AXK6S30547YG

(From Nov. 2005)

AXK5S40347YG

(From Nov. 2005)

AXK6S40547YG

(From Nov. 2005)

AXK5S50347YG

(From Nov. 2005)

AXK6S50547YG

(From Nov. 2005)

8.0 mm

AXK5S60347YG

(From Nov. 2005)

AXK6S60547YG

(From Nov. 2005)

AXK5S70347YG

(From Nov. 2005)

AXK6S70547YG

(From Nov. 2005)

AXK5S80347YG

(From Nov. 2005)

AXK6S80547YG

(From Nov. 2005)

AXK5S00347YG

(From Nov. 2005)

AXK6S00547YG

(From Nov. 2005)

P5KS

1,000 pieces

2,000 pieces

AXK5S20347YG

(From Nov. 2005)

AXK6S20647YG

(From Nov. 2005)

AXK5S30347YG

(From Nov. 2005)

AXK6S30647YG

(From Nov. 2005)

AXK5S40347YG

(From Nov. 2005)

AXK6S40647YG

(From Nov. 2005)

AXK5S50347YG

(From Nov. 2005)

AXK6S50647YG

(From Nov. 2005)

9.0 mm

AXK5S60347YG

(From Nov. 2005)

AXK6S60647YG

(From Nov. 2005)

AXK5S70347YG

(From Nov. 2005)

AXK6S70647YG

(From Nov. 2005)

AXK5S80347YG

(From Nov. 2005)

AXK6S80647YG

(From Nov. 2005)

AXK5S00347YG

(From Nov. 2005)

AXK6S00647YG

(From Nov. 2005)

Notes) 1. Regarding ordering units: During production: Please make orders in 1 reel units.

Samples for mounting conﬁrmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to conﬁrm proper mounting” on page 13.)

Samples: Small lot orders are possible. For models without V notch and Ni barrier, change the sufﬁx “J” to the sufﬁx “P,” or place a “P” where the “*” is located.

For V notch and Ni barrier models add “G” at the end of the part number.

2. The standard type comes without positioning bosses (However, mated heights of 4 mm or higher and 120 pins or more comes standard with bosses). Connectors

with positioning bosses are available for on-demand production. For P5KS type of 9th digit of the part no. changes from 4 to 3.

e.g. Mated height 4.0 mm, 20 contacts for sockets: AXK5S20037G

AXK(5(S)/6(S))

SPECIFICATIONS

1. Characteristics

Speciﬁcations

Item

Conditions

4mm, 4.5mm, 5mm,

5.5mm, 6mm, 6.5mm type

3mm, 3.5mm type

7mm, 8mm, 9mm type

Rated current

Rated voltage

0.5A/terminal (Max. 10A)

0.5A/terminal (Max. 16A)

60V AC/DC

150V AC for 1 min.

Min. 1000MΩ

Breakdown voltage

Detection current: 1mA

Using 500V DC megger

Electrical

characteristics

Insulation resistance

Contact resistance

Measured based on the HP4338B

measurement method of JIS C

5402

Max. 60mΩ

Max. 80mΩ

Composite insertion

force

Max. 0.785N {80gf} × no. of contacts (initial)

Min. 0.0588N {6gf} × no. of contacts

Composite removal

force

Mechanical

characteristics

Measures the maximum load in

the post axial direction until

removal

Post holding force

Min. 0.98N {100gf}/contacts

Ambient temperature

–55°C to +85°C

Max. peak temperature of 245°C

300°C within 5 sec.

No freezing at low temperatures

Infrared reﬂow soldering

Soldering iron

Soldering heat

resistance

Sequence

5 cycles,

insulation resistance

min. 100MΩ,

contact resistance

max. 80mΩ

Thermal shock

resistance (header

and socket mated)

1. –55_–3⁰°C, 30 minutes

2. ~ , Max. 5 minutes

3. 85⁺³₀°C, 30 minutes

4. ~ , Max. 5 minutes

5 cycles,

insulation resistance min. 100MΩ,

contact resistance max. 60mΩ

120 hours, insulation resistance

min. 100MΩ,

Environmental

characteristics

Humidity resistance

(header and socket

mated)

120 hours, insulation resistance min. 100MΩ,

contact resistance max. 60mΩ

Bath temperature 40 2°C,

humidity 90 to 95% R.H.

contact resistance

max. 80mΩ

24 hours,

48 hours,

insulation resistance

min. 100MΩ,

Saltwater spray

resistance (header

and socket mated)

24 hours,

insulation resistance min. 100MΩ,

contact resistance max. 60mΩ

Bath temperature 35 2°C,

saltwarter concentration 5 1%

contact resistance

max. 80mΩ

H²S resistance

(header and socket

mated)

Bath temperature 40 2°C,

gas concentration 3 1 ppm,

humidity 75 to 80% R.H.

contact resistance

max. 80mΩ

48 hours,

50 times

contact resistance max. 60mΩ

Lifetime

Insertion and removal

characteristics life

Repeated insertion and removal

speed of max. 200 times/hours

P5K 3mm 30 contacts

P5KS 4mm 30 contacts

Socket: 0.17g Header: 0.09g

Socket: 0.18g Header: 0.16g

Unit weight

2. Material and surface treatment

Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm

Part name

Material

Heat-resistant resin (UL94V-0)

Surface treatment

—

Molded portion

Contact/post

Contact portion: Ni plating on base, Au plating on surface

Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)

However, the area adjacent to the terminal on Ni barrier models is

exposed to Ni on base.

Copper alloy

mm General tolerance: 0.2

DIMENSIONS

P5K: Mated height 3mm, 3.5mm type

• Socket

A

B 0.1

0.5 0.05

0.2 0.03

2.35

2.15

(0.9)

4

Dimension table (mm)

5.8

No. of contacts

A

B

Suction

face

5

1.44

20

22

8.20

8.70

10.70

13.20

4.50

5.00

7.00

9.50

(0.9)

30

0.17 0.03

40

(Terminal flatness)

0.1

50

15.70 12.00

18.20 14.50

20.70 17.00

23.20 19.50

28.20 24.50

33.20 29.50

60

70

80

100

120

AXK(5(S)/6(S))

mm General tolerance: 0.2

• Header

A

C

B 0.1

D

0.5 0.05

0.2 0.03

0.5 0.05

(1.4)

1.8

Dimension table (mm)

4.6

Suction

face

1.44

3.8

No. of contacts

A

B

20

22

8.20

8.70

10.70

13.20

4.50

5.00

7.00

9.50

(1.4)

0.20 0.03

30

40

(Terminal flatness)

0.1

50

15.70 12.00

18.20 14.50

20.70 17.00

23.20 19.50

28.20 24.50

33.20 29.50

60

70

80

Mated height

3.0 mm

C

D

100

120

2.4

2.9

0.85

1.35

3.5 mm

• Socket and header are mated

Mated height

A

3.0 mm

3.5 mm

3.0

3.5

A⁺–⁰0^..²1

Note) P5KS series (mated heights 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, and 9.0mm)

cannot be mated to this type.

P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type

• Socket

A

B 0.1

0.10

(1.10)

0.50 0.05

0.20 0.03

C

1.82

(Suction face)

Dimension table (mm)

5.4

No. of contacts

A

B

4.6

3.20

20

24

30

34

36

40

50

60

70

80

100

8.20

4.50

5.50

7.00

8.00

8.50

9.50

9.20

(1.10)

0.15 0.03

10.70

11.70

12.20

13.20

15.70 12.00

18.20 14.50

20.70 17.00

23.20 19.50

28.20 24.50

Mated height

C

4.0 mm, 5.0 mm, 6.0 mm 3.05

4.5 mm, 5.5 mm, 6.5 mm 3.55

7.0 mm, 8.0 mm, 9.0 mm 6.05

• Header

0.10

0.50 0.05

0.20 0.03

4.30

1.95

Dimension table (mm)

No. of contacts

A

B

20

24

30

34

36

40

50

60

70

80

100

8.20

4.50

5.50

7.00

8.00

8.50

9.50

9.20

B 0.1

A

10.70

11.70

12.20

13.20

15.70 12.00

18.20 14.50

20.70 17.00

23.20 19.50

28.20 24.50

Mated height

C

D

4.0 mm, 4.5 mm, 7.0 mm 0.95

5.0 mm, 5.5 mm, 8.0 mm 1.95

6.0 mm, 6.5 mm, 9.0 mm 2.95

3.3

4.3

5.3

AXK(5(S)/6(S))

• Socket and header are mated

mm General tolerance: 0.2

Mated height

4.0 mm

4.5 mm

5.0 mm

5.5 mm

6.0 mm

6.5 mm

7.0 mm

8.0 mm

9.0 mm

H

4.0

4.5

5.0

5.5

6.0

6.5

7.0

8.0

9.0

+0.2

H

–0.1

Note) P5K series (mated heights 3.0mm, 3.5mm)

cannot be mated to this type.

P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type

• Socket

A

Terminal flatness

B 0.1

0.50 0.05

0.10

D

0.20 0.03

(1.10)

No. of contacts

A

B

C

4.6

3.20 5.4

120

130

160

32.50 29.50 32.00

35.00 32.00 34.50

42.50 39.50 42.00

(1.10)

0.45

3.00 0.08

Mated height

4.0 mm

D

3.05

0.50 0.05 dia.

C 0.1

4.5 mm, 6.5 mm 3.55

• Header

A

0.10

B 0.10

3.30

0.95

0.50 0.05

0.20 0.03

No. of contacts

A

B

C

120

130

160

32.50 29.50 31.00

35.00 32.00 33.50

42.50 39.50 41.00

Note 1)

0.50 0.05 dia.

C 0.10

Mated height

4.0 mm, 4.5 mm 3.30

6.5 mm 5.30

D

E

0.95

2.95

• Socket and header are mated

Mated height

4.0 mm

H

4.0

4.5

6.5

Notes) 1. Inquiry separately for diagrams of the

embossed tape and cautions for use.

2. Be sure to ask for proper speciﬁcations and

drawings before actual use.

+0.2

H

−0.1

4.5 mm

6.5 mm

AXK(5(S)/6(S))

EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)

• Tape dimensions (Conforming to JIS C 0806-1990.

However, some tapes have mounting hole pitches that do

not comply with the standard.)

• Plastic reel dimensions (Conforming to EIAJ ET-7200B)/

Paper reel dimensions (Conforming to JIS C 0806-1990)

Tape I

Tape II

A 0.3

E

C

B

1.75

Top cover tape

C

4

2

4

2

Emboss carrier tape

F

D

1.5^+0.1dia.

0

Dimension table (mm)

(1) Sufﬁx: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package)

Type

Mated height

No. of contacts

20 to 50

Type of taping

Tape I

A

B

C

D

E

F

Quantity per reel

1,500 pcs.

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

—

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

12.0

25.4 1

33.4 1

45.4 1

57.4 1

25.4 1

33.4 1

45.4 1

57.4 1

380 dia.

Socket: 4.0mm, 4.5mm, 5.0mm,

5.5mm, 6.0mm, 6.5mm

Header: 4.0mm, 4.5mm, 7.0mm

60 to 70

Tape II

Tape I

28.4

40.4

52.4

—

80 to 100

120 to 160

20 to 50

P5KS

Socket: 7.0mm, 8.0mm, 9.0mm

Header: 5.0mm, 5.5mm, 6.0mm,

6.5mm, 8.0mm, 9.0mm

60 to 70

Tape II

28.4

40.4

52.4

1,000 pcs.

80 to 100

130

(2) Sufﬁx: J (1 reel, 1,500 pieces embossed tape and paper reel package)

Type

Mated height

No. of contacts

20 to 50

Type of taping

Tape I

A

B

C

D

E

F

Quantity per reel

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

—

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

12.0

24.4⁺²

370 dia.

0

60 to 70

Tape II

Tape I

28.4

40.4

52.4

—

32.4⁺²

0

Socket and header are common

3.0mm, 3.5mm

P5K

80 to 100

120

44.4⁺²

0

56.4⁺²

0

1,500 pcs.

20 to 50

24.4⁺²

0

Socket: 4.0mm, 4.5mm, 5.0mm,

5.5mm, 6.0mm, 6.5mm

Header: 4.0mm, 4.5mm, 7.0mm

60 to 70

Tape II

28.4

40.4

52.4

32.4⁺²

0

P5KS

80 to 100

120 to 160

44.4⁺²

0

56.4⁺²

0

(3) Sufﬁx: P (1 reel, 1,000 pieces embossed tape and paper reel package)

Type

Mated height

No. of contacts

20 to 50

60 to 70

80 to 100

120

Type of taping

Tape I

A

B

C

D

E

F

Quantity per reel

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

—

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

12.0

24.4⁺²

330 dia.

370 dia.

0

Tape II

Tape I

28.4

40.4

52.4

—

32.4⁺²

0

Socket and header are common

3.0mm, 3.5mm

P5K

44.4⁺²

0

56.4⁺²

0

20 to 50

60 to 70

80 to 100

120 to 160

20 to 50

60 to 70

80 to 100

130

24.4⁺²

0

Socket: 4.0mm, 4.5mm, 5.0mm,

5.5mm, 6.0mm, 6.5mm

Header: 4.0mm, 4.5mm, 5.0mm,

5.5mm, 7.0mm, 8.0mm

Tape II

Tape I

28.4

40.4

52.4

—

32.4⁺²

0

1,000 pcs.

44.4⁺²

0

56.4⁺²

0

P5KS

24.4⁺²

0

Tape II

28.4

40.4

52.4

32.4⁺²

0

Socket: 7.0mm, 8.0mm, 9.0mm

Header: 6.0mm, 6.5mm, 9.0mm

44.4⁺²

0

56.4⁺²

0

AXK(5(S)/6(S))

Connector orientation with respect to direction of progress of embossed tape

Type

Direction

of tape progress

P5K

P5KS (Less than 100 contacts)

Socket

P5KS 120, 130, 160 contacts

Socket

This corner is oriented on the C side.

Header

Note: There is no indication on this product

regarding top-bottom or left-right

orientation.

This corner is oriented on the C side.

NOTES

1. Prevention of reverse mating

Other than 120, 130, 160 contacts type,

the socket and header are protected from

reverse mating by a molded resin key.

Excessive mating force may damage the

key, so be sure to match chamfered

corners when mating.

• P5K Socket

• P5K Header

Recommended PC board pattern

(TOP VIEW)

B 0.05

0.50 0.05

0.25 0.05

B 0.05

0.50 0.05

0.25 0.05

Outline (top view)

Chamfered corner

0.125 0.05

0.75 0.05

0.125 0.05

0.75 0.05

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 56%)

Metal mask thickness: Here, 150 µm

(Opening area ratio: 62%)

Mating state

B 0.01

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.50 0.01

Chamfered corner

2. PC Boards and Recommended

Metal Mask Patterns

Connectors are mounted with high

density, with a pitch interval of 0.4 to 0.5

mm. It is therefore necessary to make

sure that the right levels of solder are

used, in order to reduce solder bridge

and other issues. The ﬁgures to the right

are recommended metal mask patterns.

Please use them as a reference.

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Opening area ratio: 69%)

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Opening area ratio: 78%)

B 0.01

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.50 0.01

* See the dimension table on page 70 for more information on the B dimension of the socket and header.

AXK(5(S)/6(S))

P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type

• Socket

Recommended PC board pattern

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 60%)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 76%)

(TOP VIEW)

B 0.05

B 0.01

0.50 0.05

0.25 0.05

0.50 0.05

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.50 0.01

0.125 0.05

0.75 0.05

* See the dimension table on page 71 for more information on the B dimension.

• Header

Recommended PC board pattern

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 69%)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 87%)

(TOP VIEW)

B 0.01

0.50 0.01

0.23 0.01

B 0.01

0.50 0.01

0.23 0.01

B 0.05

0.50 0.01

0.50 0.05

0.25 0.05

0.50 0.05

0.125 0.05

0.75 0.05

* See the dimension table on page 71 for more information on the B dimension.

P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type

• Socket

Recommended PC board pattern

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 60%)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 76%)

(TOP VIEW)

B 0.01

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.50 0.01

B 0.05

2.40 0.05

(Pattern

3.00 0.05

(Positioning

boss

0.50 0.05

0.25 0.05

0.125 0.05

0.5 0.05

dimensions)

dimentions)

Min6.4

C 0.05

2-0.65 0.05 dia. (hole)

* See the dimension table on page 72 for more information on the B and C dimensions.

• Header

Recommended PC board pattern

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 69%)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 87%)

(TOP VIEW)

B 0.01

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.50 0.01

B 0.05

2.00 0.05

(Pattern

2.10 0.05

(Positioning

boss

0.50 0.05

0.25 0.05

0.125 0.05

0.50 0.05

dimensions)

dimentions)

MIN 6.00

C 0.05

2-0.65 0.05 dia. (hole)

* See the dimension table on page 72 for more information on the B and C dimensions.

Regarding general notes, please refer

to page 12.

For other details, please verify with the

product speciﬁcation sheets.


型号：	AXK5S70245P
厂家：	PANASONIC
描述：	Board Stacking Connector, 70 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT 连接器
文件：	总13页 (文件大小：410K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AXK5S70245P [PANASONIC]

相关型号：

AXK5S70247YG

AXK5S70340P

AXK5S70347YG

AXK5S80035J

AXK5S80035P

AXK5S80045J

AXK5S80045P

AXK5S80047YG

AXK5S80235J

AXK5S80235P

AXK5S80245J

AXK5S80245P