AXK810125YG [PANASONIC]
Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT;
| 型号： | AXK810125YG |
| 厂家： | 
PANASONIC |
| 描述： | Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT 连接器 |
| 文件： | 总13页 (文件大小：787K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AXK7, 8
NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
AND BOARD-TO-FPC
CONNECTION
NARROW PITCH
(0.4mm) CONNECTORS
P4 SERIES
3) Use of Ni barrier construction is
standard. Highly effective against solder
creeping.
• Without retention fitting: 18 contacts or
less
• With retention fitting: 22 contacts or less
4. Construction makes designing
devices easier.
ꢀ What is Ni barrier construction?
1) The lower connector bottom surface
construction prevents contact and shorts
between the PCB and metal terminals.
This enables freedom in pattern wiring,
helping to make PCB’s smaller.
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
[Contact]
Header side contact
Ni barrier
Cu Ni Au
<Socket>
<Header>
• Without retention fitting
Exposed
Ni part
Cross section of
socket side contact
Socket side contact
Socket
Header
Note: Construction makes solder creeping difficult
because header side is formed at the same time.
Connector bottom: Create any thru-hole and pattern wiring.
• With retention fitting
2) Guides are provided to take up any
position shift and facilitate insertion.
4) Porosity treatment applied for
improved resistance against corrosion.
Socket
Header
What is porosity treatment?
Insertion guide
This treatment consists of coating the
surface with a very thin film to seal pinholes
in the gold plating. This porosity treatment
technology ensures the same contact
reliability for thin gold plating as that of thick
gold plating.
FEATURES
1. 0.4 mm pitch and support for mated
heights of up to 1.5 mm, 2.0 mm, 2.5
mm, 3.0 mm, 3.5 mm, and 4.0 mm.
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
1) Contacts are highly resistant to shock
caused by dropping and employ our
original bellows contact construction.
Porosity treatment film
Pinholes
Surrounding gas
Au plating
3) The connector has a simple lock
mechanism.
Superior mated operation with click feel
to indicate that mated is complete.
Ni plating
Header side
contact
Base material
Simple lock
Socket side
mechanism
contact
ꢀ
ꢀ
ꢀ
Improvement in insertion/removal durability
Improvement in resistance to corrosion
Improvement in contact reliability for digital signals
Contacts are formed by
bending a thin metal sheet,
which provides the contact
parts with adequate spring
characteristics ensuring
greater resistance to prying
forces and drop impacts.
3. It is constructed with impact
dispersion keys inside the body to
disperse shocks when dropped.
5. Design makes efficient mounting.
Features a terminal flatness of 0.08 mm,
construction resistant to creeping flux,
and design that facilitates visual
2) V notch construction used for excellent
resistance against foreign matters.
Impact dispersion key
Socket
ꢀ What is V notch construction?
inspection of the soldered part.
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
6. Compliance with RoHS Directive
Environmentally friendly, the connectors
comply with Europe’s RoHS Directive.
Cadmium, lead, mercury, hexavalent
chromium, PBB and PBDE are not used.
7. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
Header
[Cross section of contacting part]
Without notch
Socket side contact cross section
A high level of shock resistance is
ensured by dispersing impact over the
four locations where the socket
indentations and header protrusions are
mated together.
With V notch
Header side contact cross section
Note: The following numbers of contacts are not
supported due to suction surface factors.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
APPLICATIONS
Compact portable devices “Cellular phones, DVC, Digital cameras, etc”
Ideal for Board-to-FPC connections
FPC
Reinforcing plate
Before
mating
Narrow-pitch
connectors P4
PCB
1.5mm
After
mating
The simple lock mechanism
ensures that the connector
This enables the number of pins
to be doubled while the size re-
clicks into position when it is mains the same as that for exist-
inserted for reliable single-
action insertion on the PCB.
ing FPC connectors. This, in turn,
contributes to making products
and equipment more compact.
TABLE OF PRODUCT TYPES
P4 (0.4 mm pitch):Without retention fitting
P4 (0.4 mm pitch):With retention fitting
Socket
Header
Socket
Header
✩: Available for sale
✩: Available for sale
Mated
height
Mated
height
4.0mm
4.0mm
3.5mm
3.5mm
3.0mm
3.0mm
2.5mm
2.5mm
2.0mm
2.0mm
1.5mm
1.5mm
14
16
20
22
24
26
28
30
34
36
40
44
50
54
60
64
70
80
90
100
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
10
12
20
22
24
28
30
32
34
40
44
46
50
60
80
90
100
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
Note: Please contact us regarding numbers of contacts other
than those given above.
✩
✩
✩
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
ORDERING INFORMATION
AXK
7: Narrow Pitch Connector P4 (0.4 mm pitch) Socket
8: Narrow Pitch Connector P4 (0.4 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 1.5 mm
2: For mated height 2.0 mm
3: For mated height 2.5 mm and 3.0 mm
4: For mated height 3.5 mm
5: For mated height 4.0 mm
<Header>
1: For mated height 1.5 mm, 2.0 mm and 2.5 mm
2: For mated height 3.0 mm, 3.5 mm and 4.0 mm
Functions
1: With retention fitting, with positioning bosses
2: With retention fitting, without positioning bosses
3: Without retention fitting, with positioning bosses
4: Without retention fitting, without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
5: Ni plating on base, Au plating on surface
7: Ni plating on base, Au plating on surface (for Ni barrier product available)
<Header>
Note:
5: Ni plating on base, Au plating on surface
The post edge horseshoe
bend indicated by the “W” in
the tenth digit of the header
part number refers to a
construction that makes it
difficult for the header post
edge to deform when the
connector is inserted and
removed at an angle.
Other specifications
<Header>
Y: V notch type product
W: V notch and post edge horseshoe bend type product Note*
Packing
∗
G: 3,000 pieces embossed tape and plastic reel × 2
∗ Only a socket of mated height 3.5 mm and 4.0 mm: 2,000 pieces embossed tape and plastic reel × 2.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
PRODUCT TYPES
1. Without retention fitting
Part number
Packing
Socket
Header
Number of
Mated height
and
contacts
Inner carton
Outer carton
Post edge horseshoe
bend type
(Recommendation)
14
16
20
22
24
26
28
30
34
AXK714147G
AXK716147G
AXK720147G
AXK722147G
AXK724147G
AXK726147G
AXK728147G
AXK730147G
AXK734147G
AXK736147G
AXK740147G
AXK744147G
AXK750147G
AXK754147G
AXK760147G
AXK764147G
AXK770147G
AXK780147G
AXK790147G
AXK700147G
AXK714247G
AXK720247G
AXK724247G
AXK726247G
AXK730247G
AXK734247G
AXK740247G
AXK750247G
AXK770247G
AXK780247G
AXK700247G
AXK714347G
AXK720347G
AXK724347G
AXK730347G
AXK740347G
AXK744347G
AXK750347G
AXK760347G
AXK770347G
AXK790347G
AXK700347G
AXK814145YG
AXK816145YG
AXK820145YG
AXK822145YG
AXK824145YG
AXK826145YG
AXK828145YG
AXK830145YG
AXK834145YG
AXK836145YG
AXK840145YG
AXK844145YG
AXK850145YG
AXK854145YG
AXK860145YG
AXK864145YG
AXK870145YG
AXK880145YG
AXK890145YG
AXK800145YG
AXK814145YG
AXK820145YG
AXK824145YG
AXK826145YG
AXK830145YG
AXK834145YG
AXK840145YG
AXK850145YG
AXK870145YG
AXK880145YG
AXK800145YG
AXK814145YG
AXK820145YG
AXK824145YG
AXK830145YG
AXK840145YG
AXK844145YG
AXK850145YG
AXK860145YG
AXK870145YG
AXK890145YG
AXK800145YG
AXK814145WG
AXK816145WG
AXK820145WG
AXK822145WG
AXK824145WG
AXK826145WG
AXK828145WG
AXK830145WG
AXK834145WG
AXK836145WG
AXK840145WG
AXK844145WG
AXK850145WG
AXK854145WG
AXK860145WG
AXK864145WG
AXK870145WG
AXK880145WG
AXK890145WG
AXK800145WG
AXK814145WG
AXK820145WG
AXK824145WG
AXK826145WG
AXK830145WG
AXK834145WG
AXK840145WG
AXK850145WG
AXK870145WG
AXK880145WG
AXK800145WG
AXK814145WG
AXK820145WG
AXK824145WG
AXK830145WG
AXK840145WG
AXK844145WG
AXK850145WG
AXK860145WG
AXK870145WG
AXK890145WG
AXK800145WG
36
1.5 mm
40
3,000 pieces
6,000 pieces
44
50
54
60
64
70
80
90
100
14
20
24
26
30
2.0 mm
34
40
50
70
80
100
14
20
24
30
40
44
50
60
70
90
100
3,000 pieces
6,000 pieces
2.5 mm
3,000 pieces
6,000 pieces
Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible.
2. The standard type comes without positioning bosses. Connectors with positioning bosses are available on-demand production. For this type of connector, 8th digit
of the part number changes from 4 to 3. e.g. Mated height 1.5 mm and 20 contacts for socket without retention fitting: AXK720137G
3. The 10th digit “Y” in the header part number indicates the connector has V notch. (For details, please refer to page 36.)
“W” indicates a product with V notch and post edge horseshoe bend. (“Post edge horseshoe bend” refers to a construction that makes it difficult for the header post
edge to deform when the connector is inserted and removed at an angle.)
“Products with V notch” and “products with V notch and post edge horseshoe bend” are mating compatible.
4. Connectors of different mated height (3.0 mm, 3.5 mm and 4.0 mm) and different number of contacts are available on-demand production only. Please contact us
for more details.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
2. With retention fitting
Part number
Packing
Socket
Header
Number of
and
Mated height
contacts
Inner carton
Outer carton
Post edge horseshoe
bend type
(Recommendation)
10
12
22
28
30
34
40
44
46
50
60
80
90
100
24
80
20
32
40
50
60
80
90
AXK710127G
AXK712127G
AXK722127G
AXK728127G
AXK730127G
AXK734127G
AXK740127G
AXK744127G
AXK746127G
AXK750127G
AXK760127G
AXK780127G
AXK790127G
AXK700127G
AXK724227G
AXK780227G
AXK720327G
AXK732327G
AXK740327G
AXK750327G
AXK760327G
AXK780327G
AXK790327G
AXK810125YG
AXK812125YG
AXK822125YG
AXK828125YG
AXK830125YG
AXK834125YG
AXK840125YG
AXK844125YG
AXK846125YG
AXK850125YG
AXK860125YG
AXK880125YG
AXK890125YG
AXK800125YG
AXK824125YG
AXK880125YG
AXK820125YG
AXK832125YG
AXK840125YG
AXK850125YG
AXK860125YG
AXK880125YG
AXK890125YG
AXK810125WG
AXK812125WG
AXK822125WG
AXK828125WG
AXK830125WG
AXK834125WG
AXK840125WG
AXK844125WG
AXK846125WG
AXK850125WG
AXK860125WG
AXK880125WG
AXK890125WG
AXK800125WG
AXK824125WG
AXK880125WG
AXK820125WG
AXK832125WG
AXK840125WG
AXK850125WG
AXK860125WG
AXK880125WG
AXK890125WG
1.5 mm
3,000 pieces
6,000 pieces
2.0 mm
2.5 mm
3,000 pieces
3,000 pieces
6,000 pieces
6,000 pieces
AXK820225WG
(From Oct. 2005)
20
40
50
60
80
90
20
50
60
80
34
50
80
AXK720327G
AXK740327G
AXK750327G
AXK760327G
AXK780327G
AXK790327G
AXK720427G
AXK750427G
AXK760427G
AXK780427G
AXK734527G
AXK750527G
AXK780527G
AXK820225YG
AXK840225YG
AXK850225YG
AXK860225YG
AXK880225YG
AXK890225YG
AXK820225YG
AXK850225YG
AXK860225YG
AXK880225YG
AXK834225YG
AXK850225YG
AXK880225YG
AXK840225WG
(From Oct. 2005)
AXK850225WG
(From Oct. 2005)
3.0 mm
3,000 pieces
6,000 pieces
AXK860225WG
(From Oct. 2005)
AXK880225WG
(From Oct. 2005)
AXK890225WG
(From Oct. 2005)
AXK820225WG
(From Oct. 2005)
AXK850225WG
(From Oct. 2005)
Socket:
2,000 pieces
Header:
Socket:
4,000 pieces
Header:
3.5 mm
4.0 mm
AXK860225WG
(From Oct. 2005)
3,000 pieces
6,000 pieces
AXK880225WG
(From Oct. 2005)
AXK834225WG
(From Oct. 2005)
Socket:
2,000 pieces
Header:
Socket:
4,000 pieces
Header:
AXK850225WG
(From Oct. 2005)
3,000 pieces
6,000 pieces
AXK880225WG
(From Oct. 2005)
Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible.
2. The standard type comes without positioning bosses.
Connectors with positioning bosses are available on-demand production. For this type of connector, 8th digit of the part number changes from 2 to 1. e.g. Mated
height 1.5 mm and 10 contacts for socket with retention fitting: AXK710117G
3. The 10th digit “Y” in the header part number indicates the connector has V notch. (For details, please refer to page 36.)
“W” indicates a product with V notch and post edge horseshoe bend. (“Post edge horseshoe bend” refers to a construction that makes it difficult for the header post
edge to deform when the connector is inserted and removed at an angle.)
“Products with V notch” and “products with V notch and post edge horseshoe bend” are mating compatible.
4. Different number of contacts are available on-demand production only. Please contact us for more details.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
SPECIFICATIONS
1. Characteristics
Item
Specifications
0.3A/contact (Max. 5 A at total contacts)
60V AC/DC
Conditions
Rated current
Rated voltage
Electrical
Breakdown voltage
150V AC for 1 min.
Detection current: 1mA
characteristics
Insulation resistance
Min. 1,000MΩ (initial)
Using 250V DC megger (applied for 1 min.)
Measured based on the HP4338B
measurement method of JIS C 5402
Contact resistance
Max. 70mΩ
Composite insertion force Max. 0.981N {100gf}/contacts × contacts (initial)
Min. 0.0588N {6gf}/contacts × contacts
(Mated height 1.5 mm, without removal and
retention fitting)
Mechanical
characteristics
Composite removal force
Min. 0.118N {12gf}/contacts × contacts
(Mated height 1.5 mm, except without removal
and retention fitting)
Measures the maximum load in the post axial
direction until removal
Post holding force
Min. 0.981N {100gf}/contacts
Ambient temperature
–55°C to +85°C
Max. peak temperature of 245°C
300°C within 5 sec. 350°C within 3 sec.
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
Soldering heat resistance
Sequence
0
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
1. –55–3 °C, 30 minutes
Thermal shock resistance
(header and socket mated)
2. ~ , Max. 5 minutes
3. 85+30 °C, 30 minutes
4. ~ , Max. 5 minutes
Environmental
characteristics
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Humidity resistance
(header and socket mated)
Bath temperature 40 2°C,
humidity 90 to 95% R.H.
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Saltwater spray resistance
(header and socket mated)
Bath temperature 35 2°C,
saltwater concentration 5 1%
Bath temperature 40 2°C,
gas concentration 3 1 ppm,
humidity 75 to 80% R.H.
H2S resistance
(header and socket mated) contact resistance max. 70mΩ
48 hours,
Lifetime
characteristics
Repeated insertion and removal speed of max.
200 times/hours
Insertion and removal life
50 times
Mated height 1.5mm, 20 contacts;
Socket: 0.04g Header: 0.02g
Unit weight
2. Material and surface treatment
Part name
Material
Surface treatment
—
Heat-resistant resin
(UL94V-0), Black
Molded portion
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, upper terminal of Ni barrier production: Exposed over Ni
The area adjacent to the terminal of the sockets on models with Ni barrier is exposed to
Ni on base.
Contact and Post
Copper alloy
Copper alloy
Retention fitting portion
Ni plating on base, Sn plating on surface (Except for front terminal)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
DIMENSIONS (mm)
1. Without Retention Fitting
Socket (Mated height: 1.5 mm, 2.0 mm, and 2.5 mm)
Dimension table (mm)
A
B 0.1
Number of contacts/
dimension
A
B
C
D
14
16
20
22
24
26
28
30
34
36
40
44
50
54
60
64
70
80
90
100
5.1
5.5
2.4
2.8
—
—
2.8
3.2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.40 0.05
0.08
0.40 0.05
0.15 0.03
6.3
3.6
1.6
2.0
2.4
2.8
3.2
3.6
4.4
4.8
5.6
6.4
7.6
8.4
9.6
10.4
11.6
13.6
15.6
17.6
6.7
4.0
E
7.1
4.4
7.5
4.8
7.9
5.2
8.3
5.6
9.1
6.4
9.5
6.8
0.80
0.80
10.3
11.1
12.3
13.1
14.3
15.1
16.3
18.3
20.3
22.3
7.6
C
8.4
9.6
10.4
11.6
12.4
13.6
15.6
17.6
19.6
Max. 18 contacts
Mated height/dimension
E
1.5mm
2.0mm
2.5mm
1.50
1.92
2.42
D
General tolerance: 0.2
Header (Mated height: 1.5 mm, 2.0 mm, and 2.5 mm “products with V notch”)
Dimension table (mm)
A
Number of contacts/
0.08
B 0.1
0.40 0.05 0.40 0.05
0.15 0.03
A
B
C
D
dimension
1.31
14
16
20
22
24
26
28
30
34
36
40
44
50
54
60
64
70
80
90
100
3.9
4.3
2.4
2.8
—
—
3.04
3.44
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.1
3.6
1.6
2.0
2.4
2.8
3.2
3.6
4.4
4.8
5.6
6.4
7.6
8.4
9.6
10.4
11.6
13.6
15.6
17.6
5.5
4.0
5.9
4.4
6.3
4.8
0.10 0.03
0.76
0.76
6.7
5.2
C
7.1
5.6
7.9
6.4
8.3
6.8
9.1
7.6
9.9
8.4
11.1
11.9
13.1
13.9
15.1
17.1
19.1
21.1
9.6
Max. 18 contacts
10.4
11.6
12.4
13.6
15.6
17.6
19.6
D
General tolerance: 0.2
Note: “Products with V notch” and “products with V
notch and post edge horseshoe bend” are mating
compatible.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
Header (Mated height: 1.5 mm, 2.0 mm, and 2.5 mm “products with V notch and
post edge horseshoe bend”)
Dimension table (mm)
A
Number of contacts/
dimension
A
B
C
D
B 0.1
14
16
20
22
24
26
28
30
34
36
40
44
50
54
60
64
70
80
90
100
3.9
4.3
2.4
2.8
—
—
3.04
3.44
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.08
0.40 0.05
0.40 0.05
5.1
3.6
1.6
2.0
2.4
2.8
3.2
3.6
4.4
4.8
5.6
6.4
7.6
8.4
9.6
10.4
11.6
13.6
15.6
17.6
0.15 0.03
5.5
4.0
1.31
5.9
4.4
6.3
4.8
6.7
5.2
7.1
5.6
7.9
6.4
0.76
0.76
8.3
6.8
0.10 0.03
C
9.1
7.6
9.9
8.4
11.1
11.9
13.1
13.9
15.1
17.1
19.1
21.1
9.6
10.4
11.6
12.4
13.6
15.6
17.6
19.6
Max. 18 contacts
Note: “Products with V notch” and “products with V
notch and post edge horseshoe bend” are mating
compatible.
D
General tolerance: 0.2
Socket and Header are mated
2. With Retention Fitting
Socket (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm)
Dimension table (mm)
Number of contacts/
dimension
A
B
C
D
E
A
0.08
10
12
20
22
24
28
30
32
34
40
44
46
50
60
80
90
100
5.90
6.30
7.90
8.30
8.70
9.50
9.90
1.60
2.00
3.60
4.00
4.40
5.20
5.60
—
—
4.60
5.00
6.60
7.00
7.40
8.20
8.60
9.00
9.40
2.00
2.40
2.40
2.80
—
B 0.1
0.40 0.05
0.15 0.03
F
—
—
1.60
2.40
2.80
3.20
3.60
—
—
10.30 6.00
10.70 6.40
11.90 7.60
12.70 8.40
13.10 8.80
13.90 9.60
—
Retention
fitting
0.80
0.80
—
C
D
0.10 0.03
4.80 10.60
5.60 11.40
6.00 11.80
6.80 12.60
—
—
—
—
15.90 11.60 8.80 14.60
19.90 15.60 12.80 18.60
21.90 17.60 14.80 20.60
23.90 19.60 16.80 22.60
—
0.50
—
—
—
10 and 12 contacts
20 and 22 contacts
Mated height/dimension
1.5mm
F
1.50
1.92
2.42
2.92
3.42
2.0mm
2.5mm, 3.0mm
3.5mm
E
E
4.0mm
General tolerance: 0.2
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
Header (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm
“products with V notch”)
Dimension table (mm)
Number of contacts/
dimension
A
A
B
C
D
E
B 0.1
10
12
20
22
24
28
30
32
34
40
44
46
50
60
80
90
100
3.10
3.50
5.10
5.50
5.90
6.70
7.10
7.50
7.90
9.10
9.90
1.60
2.00
3.60
4.00
4.40
5.20
5.60
6.00
6.40
7.60
8.40
—
1.94
2.34
3.94
4.34
4.74
5.54
5.94
6.34
6.74
7.94
8.74
9.14
9.94
1.64
2.04
2.80
3.20
—
0.08
0.40 0.05
—
0.15 0.03
F
—
Retention
fitting
—
1.60
2.40
2.80
3.20
3.60
4.80
5.60
6.00
6.80
—
—
—
0.76
0.10 0.03
—
C
—
—
10.30 8.80
11.10 9.60
—
—
0.50
13.10 11.60 8.80 11.94
17.10 15.60 12.80 15.94
19.10 17.60 14.80 17.94
21.10 19.60 16.80 19.94
—
D
—
—
—
10 and 12 contacts
20 and 22 contacts
Mated height/dimension
1.5mm, 2.0mm, 2.5mm
3.0mm, 3.5mm, 4.0mm
F
G
1.31
2.26
1.20
1.20
Note: “Products with V notch” and “products with V notch and
post edge horseshoe bend” are mating compatible.
E
E
General tolerance: 0.2
Header (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm
“products with V notch and post edge horseshoe bend”)
Dimension table (mm)
Number of contacts/
A
B
C
D
E
A
dimension
B 0.1
10
3.10
3.50
5.10
5.50
5.90
6.70
7.10
7.50
7.90
9.10
9.90
1.60
2.00
3.60
4.00
4.40
5.20
5.60
6.00
6.40
7.60
8.40
—
1.94
2.34
3.94
4.34
4.74
5.54
5.94
6.34
6.74
7.94
8.74
9.14
9.94
1.64
2.04
2.80
3.20
—
0.08
12
—
0.40 0.05
0.40 0.05
20
—
F
22
—
0.15 0.03
24
1.60
2.40
2.80
3.20
3.60
4.80
5.60
6.00
6.80
28
—
30
—
32
—
34
—
0.76
40
—
0.10 0.03
C
D
44
—
46
10.30 8.80
11.10 9.60
—
Retention fitting
50
—
60
13.10 11.60 8.80 11.94
17.10 15.60 12.80 15.94
19.10 17.60 14.80 17.94
21.10 19.60 16.80 19.94
—
80
—
90
—
100
—
10 and 12 contacts
20 and 22 contacts
Mated height/dimension
1.5mm, 2.0mm, 2.5mm
3.0mm, 3.5mm, 4.0mm
F
G
1.31
2.26
1.20
1.26
Note: “Products with V notch” and “products with V notch and
post edge horseshoe bend” are mating compatible.
E
E
General tolerance: 0.2
Socket and Header are mated.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806-1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
• Reel dimensions (Conforming to EIAJ ET-7200B)
Tape I
Tape II
A 0.3
A 0.3
E 1
C
B
1.75
1.75
Cover tape
C
4
2
4
2
Embossed carrier tape
F
D
D
1.5+0.1 dia.
1.5+0.1 dia.
0
0
Dimension table (mm)
1. Without Retention Fitting
Mated height
Number of contacts
Max. 18
Type of taping
Tape I
A
B
C
D
E
F
Quantity per reel
16.0
24.0
32.0
—
—
7.5
8.0
8.0
8.0
17.4
φ380
φ380
φ380
3,000
3,000
3,000
Common for socket and header:
1.5 mm, 2.0 mm and 2.5 mm
20 to 70
Tape I
11.5
14.2
25.4
33.4
80 to 100
Tape II
28.4
2. With Retention Fitting
Number of contacts
Mated height
Type of taping
A
B
C
D
E
F
Quantity per reel
Socket
Max. 18
20 to 60
70 to 90
100
Header
Max. 18
20 to 70
Tape I
Tape I
Tape II
Tape II
Tape I
Tape I
Tape II
Tape II
16.0
24.0
32.0
44.0
16.0
24.0
32.0
44.0
—
—
7.5
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
17.4
25.4
33.4
45.4
17.4
25.4
33.4
45.4
φ380
φ380
φ380
φ380
φ380
φ380
φ380
φ380
3,000
3,000
3,000
3,000
2,000
2,000
2,000
2,000
Common for socket and header:
1.5 mm, 2.0 mm, 2.5 mm, and 3.0 mm
Header: 3.5mm and 4.0 mm
11.5
14.2
20.2
7.5
80 to 100
—
28.4
40.4
—
Max. 18
20 to 60
70 to 90
100
—
11.5
14.2
20.2
Socket: 3.5mm and 4.0 mm
28.4
40.4
3. Connector orientation with respect to direction of progress of embossed tape
1) Without retention fitting
Type
Common for P4
Direction of
tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
2) With retention fitting
Type
Common for P4
Header
Direction of
tape progress
Socket
Note: There is no indication on this product regarding top-bottom or left-right orientation.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Narrow Pitch Connector P4 (0.4 mm pitches) for Inspection Usage
CONNECTOR FOR INSPECTION USAGE APPLICATIONS
WITH 3,000 INSERTION AND REMOVAL TIMES
TABLE OF PRODUT TYPES
✩: Available for sale
P4 for
inspection with
retention fitting
Product
name
P4 for
inspection
Socket
Header
10
12
14
16
20
22
24
26
28
30
34
36
40
42
44
46
50
54
60
70
80
90
100
✩
✩
FEATURES
✩
✩
✩
1. 3,000 insertion and removals (when
as recommended)
✩
✩
✩
From the 50 insertion and removals of
standard type, up to 3,000 insertion and
removals (with recommended insertion
and removal) are possible for use in
inspection.
Ideal for inspection of module units and
inspection during the device assembly
process
2. Same external dimensions and foot
pattern as standard type.
Since shape is the same as standard
type, inspection is possible without
interfering with devices in the vicinity of
standard connectors.
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
3. Improved mating
✩
✩
✩
Insertion and removal have become
easier due to a reduction in the mating
retention force required by the simple
locking structure and also in the amount
of force needed for insertion and
removal. (We cannot warrant anything
regarding mating retention.)
Notes:
1. You can use with each mated height in common.
2. Please inquire about numbers of contacts other than those given above.
3. Please inquire with us regarding delivery times.
4. Please keep the minimum unit for ordering no less than 50 pieces per lot.
5. Please inquire for further information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
NOTES
1. As shown below, excess force
during insertion may result in damage
to the connector or removal of the
solder. Please be careful. Also, to
prevent connector damage please
confirm the correct position before
mating connectors.
1) Without retention fitting
Socket
Recommended PC board pattern (TOP VIEW)
Header
Recommended PC board pattern (TOP VIEW)
0.40 0.05
0.23 0.03
0.40 0.05
0.40 0.05
0.40 0.05
0.23 0.03
0.115 0.05
0.40 0.05
0.115 0.05
0.40 0.05
2. Keep the PC board warp no more
than 0.03 mm in relation to the overall
length of the connector.
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
Metal mask thickness: Here, 150 µm
(Opening area ratio: 40 %)
(Opening area ratio: 32 %)
0.40 0.01
0.35 0.01
0.40 0.01
0.20 0.01
0.10 0.01
0.35 0.01
0.10 0.01
0.20 0.01
Max. 0.03 mm
Max. 0.03 mm
3. PC Boards and Recommended
Metal Mask Patterns
Connectors are mounted with high
density, with a pitch interval of 0.4 to 0.5
mm.
In order to reduce solder bridge and
other issues make sure the proper levels
of solder are used.
The figures to the right are recommended
metal mask patterns.
Please use them as a reference.
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
Metal mask thickness: Here, 120 µm
(Opening area ratio: 40 %)
(Opening area ratio: 50 %)
0.40 0.01
0.35 0.01
0.40 0.01
0.20 0.01
0.10 0.01
0.35 0.01
0.10 0.01
0.20 0.01
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK7, 8
2) With retention fitting
Socket
Recommended PC board pattern (TOP VIEW)
Regarding general notes, please refer
to page 12.
Header
Recommended PC board pattern (TOP VIEW)
0.40 0.05
0.40 0.05
For other details, please verify with the
product specification sheets.
0.40 0.05
0.23 0.03
0.40 0.05
0.115 0.05
0.23 0.03
0.115 0.05
0.80 0.05
2.15 0.05
0.80 0.05
0.82 0.05
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 40 %)
(Metal portion opening area ratio: 65 %)
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 32 %)
(Metal portion opening area ratio: 65 %)
0.40 0.01
0.20 0.01
0.35 0.01
0.10 0.01
0.40 0.01
0.35 0.01
0.20 0.01
0.10 0.01
0.58 0.01
2.15 0.01
0.58 0.01
0.82 0.01
0.82 0.01
2.15 0.01
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 50 %)
(Metal portion opening area ratio: 80 %)
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 40 %)
(Metal portion opening area ratio: 80 %)
0.40 0.01
0.20 0.01
0.35 0.01
0.10 0.01
0.40 0.01
0.35 0.01
0.10 0.01
0.20 0.01
0.72 0.01
0.82 0.01
0.72 0.01
2.15 0.01
0.82 0.01
2.15 0.01
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明