AXR3W330V [PANASONIC]
Telecom and Datacom Connector, 3 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT;型号: | AXR3W330V |
厂家: | PANASONIC |
描述: | Telecom and Datacom Connector, 3 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT 连接器 |
文件: | 总6页 (文件大小:196K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SYSTEM CONNECTORS
COMPLIANTWITH EIAJ RC-5238
(CONNECTOR A FOR IMT-2000
MOBILE PHONES)
SYSTEM CONNECTORS
FOR W-CDMA
Receptacle
FEATURES
[Features for Receptacles and Plugs]
1. Compliant with EIAJ RC-5238
(Connector A for IMT-2000 mobile
phones)
2. Lineup also includes models for
peripheral devices (accessories).
3. Compatible for high-speed transfers
(USB compatible).
4. Hot plug compatible signal contact.
(Step provided on contact location of
receptacle.)
5. Metal shell to counter static electricity
and EMI.
[Features for Plug]
1. Lineup of compact plugs ideal for
mobility.
2. Plug mating mouth constructed without
alignment location and with metal shell
that covers. (Prevents opening of
alignment location, has good
appearance, and maintains twisting
strength.)
3. Lock arm is covered by metal shell to
counter deformation caused by outside
force.
Signal 10 contacts with
coaxial, with charging
terminals (A type)
Signal 10 contacts with
coaxial (B type)
4. Constructed with bushings in two
locations to ensure sufficient retention
despite small size.
For charging block, 3 contacts (B type)
5. Smooth operation due to large lock
button.
Plug
Mini-plug for
charging, 3 contacts
(B type)
Mini-plug for
USB connection,
4 contacts (B type)
Compliance with RoHS Directive
ORDERING INFORMATION
1. Receptacle
2. Plug
AXR 3 W
AXR 3 W
3W: System connectors
for W-CDMA
3W: System connectors
for W-CDMA
<Receptacle>
1: SMD (B type)
<Plug>
0: Plug
3: DIP (B type)
A: With charging terminal (A type)
<Type>
0: Mini type (B type)
<No. of contacts>
0: 10 contacts
3: 3 contacts
<No. of contacts>
3: 3 contacts
4: 4 contacts
<Coaxial>
0: None
<Coaxial>
0: None
1: Available (a contact: without internal switch)
<Packing>
P: Embossed tape and paper reel × 2
V: Embossed tape and paper reel × 5
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
AXR3W
RECEPTACLE AND PLUG COMPATIBILITY TABLE
• Mini-plug (Cable connection type)
• Combination table
• Receptacle
A type
Plug (B type)-Receptacle (A type) are mated
10 contacts, coaxial and with charging terminals:
AXR3WA01P
Note: When using an AXR3W Series receptacle (A Type),
it must be mounted on the bottom side of the board.
B type
Plug (B type)-Receptacle (B type) are mated
Design side
B type
3 contacts for charging: AXR3W0030
4 contacts for USB connection: AXR3W0040
10 contacts, coaxial: AXR3W101P
3 contacts: AXR3W330V
Note: When using an AXR3W Series receptacle (B Type),
it must be mounted on the top side of the board.
Note: Please see page 133 for information about A Type and B Type.
PRODUCT TYPES
1. Receptacle
Packing quantity
No. of signal
terminals
No. of charging
terminal
Type
No. of coaxial
Part No.
Inner carton (1 reel)
800 pcs.
Outer carton
4,000 pcs.
2,000 pcs.
1,600 pcs.
3 contacts
For charging block
None
None
None
AXR3W330V
AXR3W101P
AXR3WA01P
(B type)
(A type)
Available
Available
1,000 pcs.
10 contacts
2 contacts
800 pcs.
2. Plug (Cable connection type)
Packing quantity
No. of signal
terminals
Type
EMI immunity
Part No.
Inner carton
Outer carton
2,000 pcs.
2,000 pcs.
3 contacts
4 contacts
Mini-plug for charging (B type)
Not available
Available
AXR3W0030
AXR3W0040
—
—
Mini-plug for USB connection (B type)
SPECIFICATIONS
1. Characteristics
1) Receptacle-Plug (cable connection type)
Specifications
Item
Condition
Receptacle: 10 contacts,
with 1 coaxial and 2 charge terminals
1 A: 5 terminals (No.1, 4, 5, 6, 10),
0.5 A: Except 5 terminals
Rated Current
Rated voltage
Signal terminal
Signal terminal 30 V AC/DC
Signal terminal Max. 50mΩ (Initial)
Measured based on the HP4338B measurement
method of JIS C 5402, except for the resistance of the
cord on the plug side.
Contact
resistance
Coaxial portion Max. 50mΩ (Initial)
Electrical
characteristics
Using 250 V DC megger for signal portion and 100 V DC
megger for coaxial portion (applied 1 min.)
Insulation resistance
Min. 1,000MΩ (Initial)
Signal terminal 300V AC for 1 min.
Coaxial portion 100V AC for 1 min.
Breakdown
voltage
Rated voltage is applied for one minute and check for
short circuit or damage with a detection current of 2 mA.
Electrostatic capacity
Nominal impedance
Applicable frequency
Insertion loss
Max. 2pF
Measured frequency: 1000 Hz 200 Hz
50Ω
—
—
—
—
1.92GHz to 2.17GHz
Max. 0.5dB
Max. 1.5dB
High frequency
characteristics
VSWR
Mechanical
characteristics
Lever lock strength
30 N for 1 min
The plug is pulled off with the connectors mated.
Lifetime
characteristics
Insertion and removal life of plug
and receptacle
The connectors are connected and disconnected at a
rate of 500 times/hour or less.
10,000 times
Ambient temperature
–25°C to +70°C
No freezing or condensation in low temperatures
–40°C to +85°C (The allowable storage temperature is
–40°C to +50°C if unopened from original packaging)
Reflow soldering: peak temperature 245°C or less
Manual soldering: Soldering iron temperature 300°C,
5 sec. or less
Storage temperature
No freezing or condensation in low temperatures
Environmental
characteristics
Receptacle
Resistance to
PCB surface temperature near connector terminal
—
soldering heat
Plug
Unit weight
0.9g
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
AXR3W
2. Material and surface treatment
Portion
Material
Heat resistant resin (UL94V-0)
Stainless steel
Surface
Resin-molding portion
Shell (AXR3WA01P, AXR3W101P only)
Ni plating on base, Pd + Au plating on surface
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au flash plating on surface
(partial, not including edge)
Receptacle
Contact
Copper alloy
Retention fitting (AXR3W330V only)
Resin-molding portion
Shell
Stainless steel
Cu plating on base, Sn plating on surface (except for fracture surface)
Heat resistant resin (UL94V-0)
Stainless steel
Ni plating (AXR3W0040 Ground metal plate only)
Plug (cable
connection
type)
Contact portion: Ni plating on base, Au plating on surface
Signal terminal soldering portion: Au flash plating over Ni
Contact
Copper alloy
Steel
Tapping screw
Rust proofed
DIMENSIONS (Unit: mm)
1. Receptacle
• Signal 10 contacts with coaxial, with charging terminals (A type)
Part number
AXR3WA01P
Recommended PC board pattern
(TOP VIEW)
3.25 0.05
Terminal No.13
1.6 0.05
15.2
1.6 0.15
4.5 0.1
4.5 0.05
3.25 0.15
Terminal No.1
2.1 0.05
0.75 0.05
0.8 0.05
0.5 0.05
2.1 0.15
0.6 0.05
0.4 0.05
0.6 0.05
0.25 0.05
1.9 0.1
0.5 0.07
0.2 0.05
0.55 0.05
Through
hole
(5.1 0.1)
28.4 0.15
24.8 0.1 (Contact portion)
(9.1 0.1)
13.45 0.05
17.4 0.05
20 0.2
21.4 0.15
2.8
2.8
24.8 0.05
Please set the pattern
in this range.
Please make pattern of
this part on both sides.
3.25
0.5
1.6
0.10
1.5 0.1
0.2 0.1
1.2 0.1
2.5 0.1
4.5
0
0.25 0.1
1.5–0.1 dia.
13.45 0.1
17.4 0.1
24.8 0.25 (Terminal portion)
2.9
4.4
0.3
0.6 0.1
General tolerance: 0.3
Circuit diagram of coaxial portion
(1) Plug not mating condition
(2) Plug mating condition
Receptacle side
Receptacle side
Plug side
Ground
Center
Coaxial ground terminal
(Terminal No. 13)
Center contact
(Terminal No. 12)
Coaxial ground terminal
(Terminal No. 13)
Center contact
(Terminal No. 12)
conductor
Plug mating detection terminal
(Terminal No. 11)
Plug mating detection terminal
(Terminal No. 11)
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
AXR3W
Signal 10 contacts with coaxial (B type)
Part number
Recommended PC board pattern
AXR3W101P
(TOP VIEW)
3.25 0.05
15.2
3.25 0.15
1.6 0.05
4.5 0.05
2.1 0.05
0.75 0.05
0.8 0.05
1.6 0.15
Terminal No.1
Terminal No.13
0.5 0.05
2.1 0.15
4.5 0.1
0.25 0.05
Hole
0.6 0.05
0.4 0.05
0.6 0.05
0.5 0.07
0.2 0.05
0.275 0.05
0.36 0.05
1.65 0.1
1.3 0.1
(2.5 0.1)
1
0.15
(6.5 0.1)
10 0.1
13.45 0.05
16.2 0.15
18.2
Please set the pattern
in this range.
Please make pattern of
this part on both sides.
0.25 0.1
0.1
13.45 0.15
1.2 0.1
2.7
10
General tolerance: 0.3
Circuit diagram of coaxial portion
(1) Plug not mating condition
(2) Plug mating condition
Receptacle side
Receptacle side
Plug side
Coaxial ground terminal
(Terminal No. 11)
Coaxial ground terminal
(Terminal No. 11)
Ground
Center contact
(Terminal No. 12)
Center contact
(Terminal No. 12)
Center
conductor
Plug mating detection terminal
(Terminal No. 13)
Plug mating detection terminal
(Terminal No. 13)
• For charging block, 3 contacts (B type)
Part number
AXR3W330V
Recommended PC board pattern
(TOP VIEW)
13.45 0.05
10.5 0.05
4.5 0.05
3.85 0.05
2
0.05
Terminal No.5
Terminal No.1
Terminal No.10
0.55 0.05
0.3 0.1
2
0.2
0.2 0.05
1.5 0.1 dia.
1
0.1
3.85 0.2
0.25 0.05
4.5 0.2
10.5 0.1
13.45 0.2
15.6
16.6
General tolerance: 0.3
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
AXR3W
2. Plug (Cable connection type)
• Mini-plug for charging, 3 contacts (B type)
Part number
AXR3W0030
4.50
3.85
A-A cross section
2.00
Range of R0.5
19.0
18.2
0.2
0.74 0.15
5.0
+0.02
14.6 0.2
2.5
–0.08
+0.02
0.74 0.15
13.15
–0.08
portion:
R 0.2 base
9.10
4.35
A
A
9.80
15.7
18.5
portion:
R 0 base
6.80
General tolerance: 0.3
• Mini-plug for USB connection (B type)
Part number
AXR3W0040
A-A cross section
3.85
0.50
Range of R0.5
19.0
18.2
0.2
0.74 0.15
5.0
+0.02
14.6 0.2
2.5
–0.08
+0.02
0.74 0.15
13.15
–0.08
portion:
R 0.2 base
9.10
4.35
A
A
9.80
15.7
18.5
portion:
R 0 base
6.80
General tolerance: 0.3
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
AXR3W
NOTES
1. Being more compact and thinner than
its predecessor, the bushing of this
product has been molded together with
the cable during manufacture.
Also, it is constructed so that the cable is
not secured by clamps.
Therefore, please request the
manufacturer where the assembly will
take place to make bushings in
accordance with the bushing build-in
dimensions given on the product use
diagram.
Also, if the cable is being pulled, please
implement a method to secure the cable
so that stress is not applied to the
soldered parts of the contacts.
2. Avoid stripping the lower hole of the
cover surface with a tapping screw.
Tighten the screw with a torque of 0.059
N·m/0.6 kgf·cm or less.
For other details, please verify with
the product specification sheets.
Matsushita Electric Works, Ltd.
http://www.mew.co.jp/ac/e/
相关型号:
AXR3WA01P
Telecom and Datacom Connector, 10 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51188P
Telecom and Datacom Connector, 18 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR5121
Telecom and Datacom Connector, 12 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle
PANASONIC
AXR51224P
Telecom and Datacom Connector, 22 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51228P
Telecom and Datacom Connector, 22 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51248P
Telecom and Datacom Connector, 24 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR5125
Telecom and Datacom Connector, 12 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle
PANASONIC
AXR51268
USB Connector, 26 Contact(s), Female, Right Angle, Surface Mount Terminal, Guide Slot, Plug
PANASONIC
AXR51268P
Telecom and Datacom Connector, 26 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51508P
Telecom and Datacom Connector, 50 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR5154
Telecom and Datacom Connector, 50 Contact(s), Female, Surface Mount Terminal, Receptacle
PANASONIC
AXR5157
Telecom and Datacom Connector, 50 Contact(s), Female, Surface Mount Terminal, Receptacle
PANASONIC
©2020 ICPDF网 联系我们和版权申明