AXR62156 [PANASONIC]
Telecom and Datacom Connector, 15 Contact(s), Male, Solder Terminal, Plug, ROHS COMPLIANT;型号: | AXR62156 |
厂家: | PANASONIC |
描述: | Telecom and Datacom Connector, 15 Contact(s), Male, Solder Terminal, Plug, ROHS COMPLIANT 连接器 |
文件: | 总4页 (文件大小:189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Discontinued products (
)
AXR(6)
I/O BACK CONNECTORS
FOR PC CARD
I/O CONNECTORS
FOR PC CARD
7. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
FEATURES
1. Receptacle is only 2.9 mm
2. Bellows-type contacts
Bellows-type contacts resist mating
stress and offer high contact reliability.
The bellows type contacts are fabricated
by bending thin sheet metal. They offer
reliable contact since a rounded corner,
instead of a sharp edge, is used for
APPLICATIONS
PC CARD, PDA etc.
tuning fork type contact.
Contact
• What are PC cards?
Receptacle
side
Plug side
• Receptacle
They are credit card-sized IC cards
which are compliant with the PCMCIA
standards. They contain memory to
expand the memory capabilities of
personal computers, modem functions
to enable data to be transmitted to and
from external sources, and achieve
other applications.
Suction space for
automatic mounting
3. A metal shell has been incorporated
to yield a construction which is
rugged and immune from EMI (for
protection from external noise).
4. Cross-manufacturer mating error
prevention key
The keys are configured in different
positions for each manufacturer to
prevent cross-manufacturer mating
errors.
Ultra low profile
2.9 mm
Built-in metal shell
and EMI immunity
provided Models
without the EMI
immunity can also be
supplied on request.
SMD SIL terminal
Terminal pitch
0.8 mm
Mobile phone, etc.
• Plug
External shape enabling front
and back to be clearly
distinguished by touch
Notebook
computer
I/O back
connector
for PC card:
I/O back
connector
for PC card:
Receptacle
Plug
Soldered type
of cord wires
Data transmission
to another
personal computer
Built-in metal shell and
EMI immunity can also
be supplied on request.
Connector
for PC card
Connector
for PC card
Cross-manufacturer mating
error prevention key
Header
Socket
Plug assembly is simply achieved by
a one-touch lock cover construction that,
once assembled, cannot be taken apart
(Preventing end user dismantling)
5. Expected operational life
In excess of 10,000 insertions and
removal. (used inside of an office)
6. Compatibility with automatic
mounting machines: Surface-mount
design includes
Note) PCMCIA standards for the PC Memory Card
International Association which is an
American trade association dedicated to
promoting IC memory cards.
Cross-manufacture mating error prevention key
Compliance with RoHS Directive
http://www.mew.co.jp/ac/e/
ORDERING INFORMATION
AXR
6: I/O back connectors for PC card
<Receptacle/Plug>
6
1
5
A type/B type
B type
2 A and B common type
Receptacle/plug
Receptacle
Plug
1
<No. of contacts (2 digits)>
15: 15 contacts
• Receptacle
4: With positioning boss, offset 1.45mm
• Plug
1: With earth side shell, solder connecting wires
6: Without earth side shell, solder connecting wires
<Packing>
• Only the receptacle is applied
Nil: 1,000 pcs. embossed tape and paper reel × 2
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Discontinued products (
)
AXR(6)
RECEPTACLE AND PLUG COMPATIBILITY TABLE
• Plug (Cable connection type)
A and B common type
• Combination table
• Receptacle
B type
*The plug is a reversible type in which the design
side can be set to either side when assembling.
Desigh side
15 contacts (on board mounting): AXR61154
15 contacts: AXR62151, AXR62156
Note: This product can be mounted on the bottom
side of the board because the cable plug
can be used on both the front and rear.
Note: Please see page 124 for information about A Type and B Type.
PRODUCT TYPES
1. Receptacle (B type)
2. Plug (Set) (A and B common type)
Packing quantity (emboss)
Packing quantity
No. of
contacts
EMI
resistance
No. of
Part No.
Part No.
Inner carton
(1 reel)
Inner carton
Outer carton
200 pcs.
contacts
15
Outer carton
2,000 pcs.
Available
AXR62151
AXR62156
—
—
15
AXR61154
1,000 pcs.
Not available
200 pcs.
Notes) 1. These products come with a boss design and EMI-immune construction
as standard specifications.
Note) For cellular phones and other applications where problems of insertion into
the wrong device is possible, the location of the key will be changed for each
order. An order number will be set for each separate order.
2. For cellular phones and other applications where problems of insertion
into the wrong device is possible, the location of the key will be changed
for each order. An order number will be set for each separate order.
SPECIFICATIONS
1. Characteristics
Item
Specifications
Conditions
Rated current
0.5A
Insulation resistance
Breakdown voltage
Min. 1,000MΩ (Initial)
250V AC for 1 min.
Using 500V DC megger (applied for 1 min.)
Detection current: 1mA
Electrical
characteristics
Measured based on the HP4338B measurement method
of JIS C 5402, except for the resistance of the cord on the
plug side.
Contact resistance
Max. 70mΩ
Ambient temperature
–55 to +85°C
10,000 times
5,000 times
Inside an office
Outside an office
Receptacle
Plug
Insertion and removal
lifetime characteristics
Reflow soldering peak temperature Max. 245°C
Manual soldering Max. 300°C 5 sec.
Receptacle’s surface temperature
Resistance to soldering
heat
AWG #28 (Use shielded wire type
when using EMI countermeasure type.)
Applicable cord (plug)
Unit weight (receptacle)
0.5 g
2. Material and surface treatment
Portion
Material
Surface
—
Resin-molding portion
Heat resistant resin (UL94V-0)
Stainless steel
Shell
Cu plating base, Sn plating on surface
Receptacle
Contact portion: Ni plating base, Au plating on surface
Terminal portion: Ni plating base, Au plating on surface
(Except for thick of terminal)
Post
Copper alloy
Resin-molding portion
Heat resistant resin (UL94V-0)
Stainless steel
—
—
Shell
Plug
Contact portion: Ni plating base, Au plating on surface
Terminal portion: Ni plating base, Au plating on surface
Contact
Copper alloy
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Discontinued products (
)
AXR(6)
mm General tolerance: 0.3
DIMENSIONS
• Receptacle (B type)
Recommended PC board pattern
(TOP VIEW)
Foot pattern
for retention fitting
(17.0)
(16.0)
16.0
No. 15 terminal
Max.14.0
0.25
2.9
0.6
0.2
0.15
0.9 (Soldered portion)
NO. 1 terminal
2-0.7 0.1 dia.
2.0 2.7
6.1
0.5 0.05
0.8 0.05
Note)
11.2 0.05
14.2 0.05
Min.18.0
6.1 0.15
5.4
7.0
Notes) 1. The dimensions for types that do not have a
positioning boss are those above with the boss
0.25 0.1
0.8 0.15
section subtracted. In addition, a 2-0.9+0.1 dia. for
0
the recommended PC board pattern is not
required.
2. Since product bottom is a metal shell, do not
make pattern circuits (to prevent shorting).
11.2 0.25
14.2 0.15
17.0
Note) Cross-manufacture mating error prevention key is determined to each customer.
Please consult us for the details.
• Plug (assembled condition) (A and B common type)
Note)
5.0
25.9
23.5
3.6
2.4 0.2
16.5 0.2
15.45 0.2
3.3 0.2
(4.3)
4.3
8.3
7.0
31.6
35.9
Applicable cable:
4.5 to 5.5 dia.
7.6
9.0
Note) The place of incorrect insertion prevention key will be determined according to each customer.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Discontinued products (
)
AXR(6)
EMBOSSED TAPE DIMENSIONS (unit: mm)
• Tape dimensions (Conforming to JIS C 0806, 1995.
However, some tapes have mounting hole pitches that do not
comply with the standard.)
• Reel dimensions (Conforming to JIS C 0806, 1995)
E+20
0.3
A
B
Top cover tape
C
1.75
4
2
Embossed carrier tape
F
D
1.5 00.1 dia.
A
B
C
D
E
F
Quantity per reel
1,000
Receptacle
32.0
28.4
14.2
16.0
32.4
370 dia.
• Connector orientation with respect to direction of progress of embossed tape
Type
Direction of
Receptacle
tape progress
NOTES
1. Receptacle
4) Cross-manufacture mating error
Regarding general notes, please refer
to page 14.
1) This product comes with a positioning
boss. A positioning hole must be
provided at the PCB design stage.
The connector has two projections for
positioning. When designing PC board
pattern, holes for the projections are
necessary.
2) This product features a metal shell
around the molded part in order to
provide ruggedness and immunity from
EMI. However, when the case is
designed to enable mating to be
accomplished even more reliably, the
following points should be borne in mind.
• Provide a guide at the plug insertion
opening to prevent excessive mating
stress when the plug is mated.
• In order to reinforce the shell part of the
receptacle, guide the shell part using
the case.
prevention key is built-in, so that the key
positions of receptacle and plug should
be confirmed that they would meet.
2. Plug
2-1. Regarding plug connection and
disconnection
For other details, please verify with the
product specification sheets.
Cross-manufacture mating error
prevention key is built-in, so that the key
positions of receptacle and plug should
be confirmed that they would meet.
2-2. Precautions for cord soldering
1) Take steps to prevent the soldering
iron from melting the plastic parts.
2) Take care not to allow bulbes into the
solder or short-circuiting between
neighboring pins to occur.
3) Do not allow the solder flux to run into
the contact area since this will cause
defective contact.
4) Upon completion of the lead wire
soldering, crimp the cable clamp area of
the lock arm shell to achieve a strain
relief function.
• Ensure that the equipment case and
receptacle are configured in such a way
that the clearance between them is
minimal—in the 0.1 mm range, for
instance.
3) This product has a holder to prevent
the pin soldering from lifting off. However,
care should be taken in designing the
equipment so that an excessive lift-off
force will not be applied to the soldered
area of each pin.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号:
AXR71161P
Telecom and Datacom Connector, 16 Contact(s), Male, Surface Mount Terminal, Receptacle
PANASONIC
AXR71162P
Telecom and Datacom Connector, 16 Contact(s), Male, Surface Mount Terminal, Receptacle
PANASONIC
AXRB9000
High Stability Low Noise Rubidium Frequency Reference in 19â rack (2 HU) with up to 3 outputs
AXTAL
AXRB9000_18
High Stability Low Noise Rubidium Frequency Reference in 19â rack (2 HU) with up to 3 outputs
AXTAL
©2020 ICPDF网 联系我们和版权申明