CB1V-R-12V [PANASONIC]
Power/Signal Relay, SPDT, Momentary, 0.134A (Coil), 12VDC (Coil), 1600mW (Coil), 1A (Contact), 12VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT;型号: | CB1V-R-12V |
厂家: | PANASONIC |
描述: | Power/Signal Relay, SPDT, Momentary, 0.134A (Coil), 12VDC (Coil), 1600mW (Coil), 1A (Contact), 12VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT PC 光电二极管 继电器 |
文件: | 总11页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AUTOMOTIVE RELAY
WITH ISO TERMINAL
ARRANGEMENT
CB RELAYS
FEATURES
1.This relay has an ISO (International
Organization for Standardization)
terminal arrangement.
5. Surge absorbing built-in diode type
that works when the relay coil is off
and an internal resistor type are
available. (Please inquire.)
6. Protective element type is also
available.
Terminals are all solder plated.
*35 A type: Terminal is the plug-in type
(no plating).
2. Relay is compact and high capacity
(40 A).
7. For only plug-in types, types with
nominal switching capacities of 35 A
(12 V) and 15 A (24 V) are available.
Compact form factor realized with space
saving 22 × 26 mm .866 × 1.024 inch
small base area thanks to integrated
bobbin and base construction. Features
high switching capacity of 40 A
3. Features high thermal resistance of
125°C 257°F (heat resistant type).
Heat resistant type is available that can
withstand use near engines. (40 A
switching capacity)
TYPICAL APPLICATIONS
1. Automobiles
Headlights, Cell motors, Air conditioners,
ABS, EPS, etc.
2. Construction equipment
3. Agricultural equipment, Conveyor,
etc.
4. Sealed type available for resisting
adverse environments.
Compliance with RoHS Directive
ORDERING INFORMATION
CB
Contact arrangement
1a: 1 Form A
1: 1 Form C
Contact rating
Nil: Standard type
H: High contact capacity type
V: 35 A type
Protective construction
Nil: Sealed type
F: Flux-resistant type
Heat resistant of types
Nil: Standard type
T: Heat resistant type
Protective element
Nil: None
D: with diode inside
R: with resistor inside
Mounting classification
Nil: Plug-in type
P: PC board type
M: Bracket type
Coil voltage (DC)
12V, 24 V
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
TYPES
1. Standard type
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Mounting classification
PC board type
Plug-in type
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1a-P-12V
CB1a-P-24V
CB1a-12V
CB1aF-P-12V
CB1aF-P-24V
CB1aF-12V
1 Form A
CB1a-24V
CB1aF-24V
CB1a-M-12V
CB1a-M-24V
CB1-P-12V
CB1-P-24V
CB1-12V
CB1aF-M-12V
CB1aF-M-24V
CB1F-P-12V
CB1F-P-24V
CB1F-12V
Bracket type
PC board type
Plug-in type
1 Form C
CB1-24V
CB1F-24V
CB1-M-12V
CB1-M-24V
CB1aH-P-12V
CB1aH-P-24V
CB1aH-12V
CB1aH-24V
CB1aH-M-12V
CB1aH-M-24V
CB1F-M-12V
CB1F-M-24V
CB1aHF-P-12V
CB1aHF-P-24V
CB1aHF-12V
CB1aHF-24V
CB1aHF-M-12V
CB1aHF-M-24V
Bracket type
PC board type*
Plug-in type
High contact capacity
(1 Form A)
Bracket type
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
Notes: 1. Please use “CB∗∗∗R∗∗” to order built-in resistor type and “CB∗∗∗D∗∗” to order built-in diode type. (Asterisks “∗” should be filled in from parts table.)
2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using.
2. Heat resistant type
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Mounting classification
PC board type
Plug-in type
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1a-T-P-12V
CB1a-T-P-24V
CB1a-T-12V
CB1aF-T-P-12V
CB1aF-T-P-24V
CB1aF-T-12V
1 Form A
CB1a-T-24V
CB1aF-T-24V
CB1a-T-M-12V
CB1a-T-M-24V
CB1-T-P-12V
CB1-T-P-24V
CB1-T-12V
CB1aF-T-M-12V
CB1aF-T-M-24V
CB1F-T-P-12V
CB1F-T-P-24V
CB1F-T-12V
Bracket type
PC board type
Plug-in type
1 Form C
CB1-T-24V
CB1F-T-24V
CB1-T-M-12V
CB1-T-M-24V
CB1aH-T-P-12V
CB1aH-T-P-24V
CB1aH-T-12V
CB1aH-T-24V
CB1aH-T-M-12V
CB1aH-T-M-24V
CB1F-T-M-12V
CB1F-T-M-24V
CB1aHF-T-P-12V
CB1aHF-T-P-24V
CB1aHF-T-12V
CB1aHF-T-24V
CB1aHF-T-M-12V
CB1aHF-T-M-24V
Bracket type
PC board type*
Plug-in type
High contact capacity
(1 Form A)
Bracket type
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
Notes: 1. Please use “CB∗∗∗R∗∗” to order built-in resistor type and “CB∗∗∗D∗∗” to order built-in diode type. (Asterisks “∗” should be filled in from parts table.)
2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using.
3. 35 A type (*Terminals are all of the plug-in type.)
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1aV-12V
CB1aV-24V
CB1V-12V
CB1aVF-12V
CB1aVF-24V
CB1VF-12V
1 Form A
1 Form C
CB1V-24V
CB1VF-24V
CB1aV-R-12V
CB1aV-R-24V
CB1V-R-12V
CB1V-R-24V
CB1aV-D-12V
CB1aV-D-24V
CB1V-D-12V
CB1V-D-24V
CB1aVF-R-12V
CB1aVF-R-24V
CB1VF-R-12V
CB1VF-R-24V
CB1aVF-D-12V
CB1aVF-D-24V
CB1VF-D-12V
CB1VF-D-24V
1 Form A with resistor inside
1 Form C with resistor inside
1 Form A with diode inside
1 Form C with diode inside
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
RATING
1. Coil data
1) 1. No protective element and with diode inside
Nominal operating
current
(at 20°C 68°F)
Coil resistance
( 10%)
(at 20°C 68°F)
Nominal operating
power
(at 20°C 68°F)
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(Initial, at 20°C 68°F) (Initial, at 20°C 68°F)
Drop-out voltage
Usable voltage
range
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
117mA
75mA
103Ω
320Ω
103Ω
80Ω
411Ω
320Ω
1.4W
1.8W
10 to 16V DC
20 to 32V DC
1 Form A,
1 Form C
6 to 14V DC
117mA
150mA
58mA
1.4W (PC board type)
1.8W
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
10 to 16V DC
20 to 32V DC
High contact
capacity
(1 Form A)
1.4W (PC board type)
1.8W
6 to 14V DC
75mA
Note: Other pick-up voltage types are also available. Please contact us for details.
2) With resistor inside
Nominal operating
current
(at 20°C 68°F)
Combined resistance
( 10%)
Nominal operating
power
(at 20°C 68°F)
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(Initial, at 20°C 68°F) (Initial, at 20°C 68°F)
Drop-out voltage
Usable voltage
range
(at 20°C 68°F)
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
134mA
84mA
89.5Ω
287.2Ω
1.6W
2.0W
10 to 16V DC
20 to 32V DC
1 Form A,
1 Form C
6 to 14V DC
2. Specifications
1) Standard type (12 V coil voltage)
Characteristics
Item
Specifications
1 Form C
High contact capacity
Arrangement
1 Form A
(1 Form A)
Contact
Contact resistance (Initial)
Contact material
Typ2mΩ (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
N.O.: 40A 14V DC
N.C.: 30A 14V DC
70A 14V DC (at 20°C 68°F)
50A 14V DC (at 85°C 185°F)
Nominal switching capacity (Initial)
40A 14V DC
Max. carrying current (Initial)
(14V DC, at 85°C 185°F, continuous)
Nominal operating power
Min. switching capacity*1
Initial insulation resistance
N.O.: 40A
1.4W
N.O.: 40A, N.C.: 30A
1.4W
N.O.: 40A
Rating
1.8W (1.4W: PC board type)
1A 12V DC (12V DC), 1A 24V DC (24V DC)
Min. 20 MΩ (at 500 V DC)
Between open contacts
Between contacts and coil
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Initial breakdown
voltage
Electrical
characteristics
Operate time (at nominal voltage)
Max. 15ms (at 20°C 68°F, excluding contact bounce time) (Initial)
(at 20°C 68°F)
Release time (at nominal voltage)
(at 20°C 68°F)
Max. 15ms (at 20°C 68°F, excluding contact bounce time, without diode) (Initial)
Functional
Min. 200 m/s2 {20G}
Min. 1,000 m/s2 {100G}
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration
10 Hz to 500 Hz, Min. 44.1m/s2 {4.5G}
10 Hz to 2,000 Hz, Min. 44.1m/s2 {4.5G} Time of vibration for each direction; X.Y. Z direction: 4 hours
Flux-resistant type: Min. 105, Sealed type: Min. 5×104 (Operating frequency: 2s ON, 2s OFF)
Min. 106 (at 120 cpm)
resistance
Destructive
Electrical (at nominal switching capacity)
Mechanical
Expected life
Standard type; Ambient temp: –40 to +85°C –40 to +185°F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and
storage*2
Conditions
Unit weight
Heat resistant type; Ambient temp: –40 to +125°C –40 to +257°F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed
15 cpm (At nominal switching capacity)
Approx. 33 g 1.16 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to Conditions for operation,
transport and storage mentioned in AMBIENT ENVIRONMENT.
2) Standard type (24 V coil voltage)
Characteristics
Item
Specifications
1 Form C
High contact capacity
(1 Form A)
Arrangement
1 Form A
Contact
Contact resistance (Initial)
Contact material
Max. 15mΩ (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
N.O.: 20A 28V DC
N.C.: 10A 28V DC
Nominal switching capacity (Initial)
20A 28V DC
20A 28V DC
Rating
Max. carrying current (Initial)
(28V DC, at 85°C 185°F, continuous)
Nominal operating power
20A
N.O.: 20A, N.C.: 10A
1.8W
20A
1.8W
1.8W, 1.4W (PC board type)
Note: All other specifications are the same as those of standard type (12 V coil voltage)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
3) Heat resistant type (12 V and 24 V coil voltage)
Specifications
High contact
Characteristics
Item
12V
24V
High contact
capacity
Arrangement
1 Form A
1 Form C
capacity
1 Form A
1 Form C
(1 Form A)
(1 Form A)
Contact
Contact resistance (Initial)
Contact material
Max. 15mΩ (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
Nominal switching capacity
(Initial)
N.O.: 40A 14V DC
N.C.: 30A 14V DC
N.O.: 20A 28V DC
N.C.: 10A 28V DC
40A 14V DC
50A 14V DC
40A 14V DC
20A 28V DC
25A 28V DC
20A 28V DC
25A 28V DC
Max. carrying current (Initial)
(at 85°C 185°F, continuous)*
N.O.: 50A 14V DC
N.C.: 30A 14V DC 14V DC 14V DC
45A 50A
N.O.: 25A 28V DC
N.C.: 10A 28V DC
Rating
1.4W
(PCboard
type)
1.8W,
1.4W
(PC board type)
Nominal operating power
1.4W
1.4W
1.8W
1.8W
1.8W
Notes: 1. All other specifications are the same as those of standard type (12 V coil voltage)
2. *Current value in which carry current is possible when the coil temperature is 180°C 356°F
4) 35 A type (12 V coil voltage)
Characteristics
Item
Specifications
Arrangement
1 Form A
1 Form C
Contact
Contact resistance (Initial)
Contact material
Typ2mΩ (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
Nominal switching capacity (Resistive load)
35A 14V DC
N.O.: 35A
N.O.: 35A 14V DC, N.C.: 25A 14V DC
N.O.: 35A, N.C.: 25A
1.4W, 1.6W (with resistor inside)
Max. carrying current (Initial)
(14V DC, at 85°C 185°F, continuous)
Nominal operating power
Rating
Min. switching capacity (Reference value)*
Initial insulation resistance
1A 12V DC (12V DC), 1A 24V DC (24V DC)
Min. 20 MΩ (at 500 V DC)
Between open contacts
500 Vrms for 1 min. (Detection current: 10mA)
Initial breakdown
voltage
Electrical
characteristics
Between contacts and coil
500 Vrms for 1 min. (Detection current: 10mA)
Operate time (at nominal voltage)
Release time (at nominal voltage)
Max. 15ms (excluding contact bounce time) (Initial)
Max. 15ms (excluding contact bounce time, without diode) (Initial)
Min. 100 m/s2 {10G} (Half-wave pulse of sine wave: 11ms; detection: 10µs)
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms)
10 Hz to 100 Hz, Min. 44.1m/s2 {4.5G} (Detection time: 10µs)
10 Hz to 2,000 Hz, Min. 44.1m/s2 {4.5G} Time of vibration for each direction; X.Y. Z direction: 4 hours
Functional
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration
resistance
Destructive
Flux-resistant type: Min. 105, Sealed type: Min. 5×104 (Operating frequency: 2s ON, 2s OFF)
Electrical (at nominal switching capacity)
Mechanical
With diode inside: Min. 5×104 (Operating frequency: 2s ON, 2s OFF)
Expected life
Min. 106 (at 120 cpm)
Ambient temp: –40°C to +85°C –40°F to +185°F
Conditions for operation, transport and storage
Max. operating speed
Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
15 cpm (At nominal switching capacity)
Approx. 26 g .92 oz, Approx. 28 g .99 oz (with diode inside)
Note: * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load.
5) 35 A type (24 V coil voltage)
Characteristics
Item
Specifications
Contact
Arrangement
1 Form A
1 Form C
Nominal switching capacity (Resistive load)
15A 28V DC
N.O.: 15A 28V DC, N.C.: 8A 28V DC
Max. carrying current
(14V DC, at 85°C 185°F, continuous)
Rating
N.O.: 15A
N.O.: 15A, N.C.: 8A
Nominal operating power
1.8W, 2.0W (with resistor inside)
Note: All other specifications are the same as those of 35 A type (12 V coil voltage).
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
REFERENCE DATA
CB RELAYS (Standard type)
1. Allowable ambient temperature
2. Max. switching capability (Resistive load)
(Standard type)
3. Ambient temperature and operating voltage
range
(Standard type)
(N.O. side Room temperature)
60
40
150
140
35
50
40
30
120
100
80
30
25
20
15
10
20A
30A
40A
20
60
105 cycle line
10
40
20
5
Actual value
Pick-up voltage
(Cold start)
(Max. 105 cycle)
0
0
0
10
20
30
40
50
90
100 110 120 130 140 150
Applied Coil Voltage, %V
−40 −20
0
20 40 60 8085 100 120
Switching current, A
Ambient temperature, °C
Asssumption:
• Maximum mean coil temperature: 180°C
• Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage)
4. Distribution of pick-up and drop-out voltage
Sample: CB1-P-12V, 42pcs.
5. Distribution of operate and release time
Sample: CB1-P-24V, 42pcs.
* Without diode
60
60
Operate time
Pick-up voltage
Release time
50
Drop-out voltage
50
40
30
20
10
40
30
20
10
0
0
1.01.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Voltage, V
Operate and release time, ms
6-(1). Electrical life test (Motor free)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1F-12V, 5pcs.
Load: 25A 14V DC, motor free actual load
Switching frequency: (ON:OFF = 1s:9s)
Ambient temperature: Room temperature
Circuit
6
50
40
5
Pick-up voltage
Tested sample
Max.
4
3
2
1
0
X
3
20
10
0
Min.
Relay harness
Max.
X
Min.
Drop-out voltage
Motor
M
14V DC
Max.
X
Min.
0
5
10
0
5
10
Observation of load waveform
with current probe and digital
oscilloscope
No. of operations, × 104
No. of operations, × 104
Load current waveform
Inrush current: 80A, Steady current: 25A
20A
200ms
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
6-(2). Electrical life test (Lamp load)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1F-12V, 5pcs.
Load: 45/65Wx5 parallel, 14V DC, halogen lamp
actual load
Switching frequency: (ON:OFF = 1s:8s)
Ambient temperature: Room temperature
Circuit
6
50
40
5
Pick-up voltage
Max.
4
3
X
Min.
30
20
10
0
Relay
Halogen lamp 12V 45/65W
Drop-out voltage
2
Max.
X
Min.
1
0
14V DC
Max.
X
Min.
20
0
10
20
0
10
Observation of load waveform with
current probe and digital oscilloscope
No. of operations, × 104
No. of operations, × 104
Load current waveform
Inrush current: 100A, Steady current: 20A
20.5A
200ms
CB RELAYS (High contact capacity type)
1. Allowable ambient temperature
2. Max. switching capability
(High contact capacity type)
3. Ambient temperature and operating voltage
range
(High contact capacity type)
60
50
40
40
150
140
35
30
25
120
30A
100
40A
Operation range
20
30
20
80
50A
15
10
60
105 cycle line
10
60A
70A
40
20
5
Actual value
(Max. 1 cycle)
Pick-up voltage
(Cold start)
0
0
0
20
40
60 80 100
−40 −20
0
20 40 60 8085 100 120
90
100 110 120 130 140 150
Applied Coil Voltage, %V
Switching current, A
Ambient temperature, °C
Asssumption:
• Maximum mean coil temperature: 180°C
• Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage)
4. Distribution of pick-up and drop-out voltage
Sample: CB1aHF-12V, 53pcs.
5. Distribution of operate and release time
Sample: CB1aHF-12V, 53pcs.
6. Contact resistance
Sample: CB1aHF-12V, 53pcs.
(By voltage drop 6V DC 1A)
70
12
70
60
50
40
30
20
10
0
Pick-up voltage
Drop-out voltage
60
50
40
30
20
10
0
10
8
Operate time
6
4
Release time
12
2
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Voltage, V
8
10
14
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
Resistance, mΩ
Coil voltage, V
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
7-(1). Electrical life test (Motor free)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1aH-12V, 3pcs.
Load: Inrush current: 64A/Steady current: 35A
Fan motor actual load (motor free) 12V DC
Switching frequency: (ON:OFF = 3s:7s)
Ambient temperature: Room temperature
Circuit
10
9
50
40
30
20
10
8
7
6
Pick-up voltage
5
4
Max.
X
3s
7s
Min.
Drop-out voltage
10s
3
Max.
X
Min.
Max.
2
X
Min.
1
0
0
0
5
10
0
5
10
M
No. of operations, × 104
No. of operations, × 104
Load current waveform
Inrush current: 64A, Steady current: 35A
10A
500ms
7-(2). Electrical life test (Motor lock)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1aH-12V, 5pcs.
Load: 100A 14V DC
Magnet clutch actual load (lock condition)
Switching frequency: (ON:OFF = 1s:9s)
Ambient temperature: Room temperature
Circuit
50
40
6
Pick-up voltage
5
Max.
X
Min.
4
3
30
20
10
0
Max.
X
Min.
Clutch
(5V DC
applied)
2
14V DC
Drop-out voltage
M
Max.
X
Min.
1
0
Lock condition
0
10
20
40
60
80 100
0
10
20
40
60
80 100
No. of operations
No. of operations
Load current waveform
100A 14V DC
20A
200ms
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
CB RELAY (35 A type)
1-(1). Distribution of pick-up and drop-out
voltage
1-(2). Distribution of pick-up and drop-out
voltage
1-(3). Distribution of pick-up and drop-out
voltage
Sample: CB1aV-12V, 30pcs.
Sample: CB1aV-24V, 30pcs.
Sample: CB1V-24V, 30pcs.
20
20
30
25
20
15
10
Pick-up voltage
Pick-up voltage
Pick-up voltage
Drop-out voltage
18
Drop-out voltage
Drop-out voltage
16
14
12
10
8
15
10
5
6
4
5
2
0
00
00 3.5 4.5
4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Voltage, V
5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5
11.5 12.5
Voltage, V
Voltage, V
2.-(1) Contact resistance
2.-(2) Contact resistance
2.-(3) Contact resistance
Sample: CB1aV-12V, 30pcs.
(By voltage drop 12 V DC 1A)
Sample: CB1aV-24V, 30pcs.
(By voltage drop 24 V DC 1A)
Sample: CB1V-24V, 30pcs.
(By voltage drop 24 V DC 1A)
25
20
15
10
5
25
20
15
10
5
20
N.C. side
N.O. side
15
10
5
0
0
0
0
1.4
1.6
1.8
2.0
0
1.4
1.6
1.8
2.0
0
1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
Contact resistance, mΩ
Contact resistance, mΩ
Contact resistance, mΩ
3. Electrical life test (Blower fan)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1aV-D-24V, 3pcs.
Load: Blower fan load 28 V DC
Inrush current: 30 A/Steady current: 10 A
Switching frequency: (ON:OFF = 3s:3s)
Switching cycle: 105
Ambient temperature: 85°C
Coil protective element: Diode
Circuit
11
10
50
40
Max.
X
9
Pick-up voltage
Min.
8
7
6
5
4
30
20
10
0
Max.
X
Min.
3s
3s
M
3
Drop-out voltage
Max.
X
Min.
2
1
0
6s
0
5
10
0
5
10
No. of operations, × 104
No. of operations, × 104
Load current waveform
Inrush current: 30 A, Steady current: 10 A
10A
500ms
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
DIMENSIONS (Unit: mm inch)
1. PC board type
External dimensions
Schematic (Bottom view)
1 Form A
86
30
25.0
.984
87
85
Including diode type,
4.5
.177
including resistor type also available
1.0
.039
2.15
.085
22.0
.866
6.3
.248
1 Form C
26.0
86
87a
30
1.024
87
85
86
87a
Including diode type,
including resistor type also available
8.4
.331
16.8
.661
30
0.8
87
85
.031
8
PC board pattern (Bottom view)
2.6
.102
.315
8.4
.331
4(or5)-2.6
17.9
.705
4(or5)-.102
1 Form C type only
86
85
8.4
87a
.331
16.8
.661
30
87
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
General tolerance
0.1 .004
4(or5)-1.4
4(or5)-.055
1 Form C type only
8.0
.315
8.4
Min. 3mm .118 inch:
0.3 .012
.331
17.9
.705
2. Plug-in type * The dimensions are the same as those of 35A type.
External dimensions
Schematic (Bottom view)
1 Form A
86
30
25.0
.984
87
85
Including diode type,
including resistor type also available
4.0
.157
11.0
.433
1 Form C
5-6.3
22.0
.866
1.7 dia.
5-.248
.067 dia.
86
87a
30
26.0
1.024
87
85
8.4
.331
86
Including diode type,
including resistor type also available
87a
16.8
.661
30
0.8
87
85
.031
2.6
.102
8
.315
8.4
.331
17.9
.705
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
3. Bracket type
External dimensions
Schematic (Bottom view)
4.0 0.1
1 Form A
.157 .004
16.0
.630
86
30
1.7
5.4 0.1 dia.
.213 .004
.067
16.0
.630
6.0
.236
87
85
Including diode type,
including resistor type also available
25.0
.984
1 Form C
86
87a
30
4.0
.157
87
85
11.0
.433
Including diode type,
including resistor type also available
5-6.3
22.0
.866
1.7 dia.
.067 dia.
5-.248
26.0
1.024
0.8
.031
17.9
.705
8.4
8
.331
.315
8.4
.331
2.6
16.8
.661
.102
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
General tolerance
0.1 .004
4. High contact capacity (1 Form A) (Plug-in type)
External dimensions
Schematic (Bottom view)
86
30
25.5
87
85
1.004
Including diode type,
including resistor type also available
4.0
11.0
.433
.157
15.0
.591
5.8
.228
0.08
2-9.5 0.08
2-.374 .003
2-6.3
2-.248
.003
26.5
1.043
4-1.7 dia. hole
4-.067 dia. hole
22.0
.866
8.4
.331
0.8
86
.031
1.2
16.8
.661
.047
30
87
85
2.6
.102
8.4
.331
17.9
.705
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
CB
5. High contact capacity (1 Form A) (PC board type)
External dimensions
Schematic (Bottom view)
86
30
25.5
1.004
1.0
1.0
.039
87
85
1.0
.039
.039
4.5
.177
Including diode type,
including resistor type also available
4.5
5.3
.209
3-1.7
3-.067
5.3
.209
.177
2-2.15
2-.085
6.3
3-1.7
3-.067
A*
9.5
9.5
.374 .248
26.5
.374
PC board pattern (Bottom view)
22.0
1.043
.866
1.4
Sealed by epoxy resin
3-2.15
3-.085
8.4
.331
2.6
.055
2-0.8
2-.031
.102
8 6
86
3.9
8.4
.331
.154
2-1.2
2-.047
16.8
.661
3-1.8
3-.071
7.8
3.9
16.8
.661
3 0
.307
.154
30
87
8 7
8 5
85
3-1.8
3-2.15
3-.085
8.4
3-.071
7.8
8.4
.331
17.9
.705
.331
3.9 3.9
.154 .154
.307
2.6
17.9
.102
.705
* Intervals between terminals is measured at A surface level.
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch:
0.3 .012
Cautions regarding the protection element
1. Part numbers without protection
elements
1) 12 V models
2. Part numbers with diodes
These relays use a diode in the coil surge
protection element. Therefore, the
release time is slower and the working life
might be shorter compared to part
numbers without protection elements and
part numbers with resistors.
Be sure to use only after evaluating under
actual load conditions.
3. Part numbers with resistors
This part number employs a resistor in
the coil surge protection circuit; therefore,
an external surge protection element is
not required. In particular, when a diode
is connected in parallel with a coil, the
release time becomes slower which
could adversely affect working life.
Please check the circuit and make sure
that a diode is not connected in parallel
with the coil drive circuit.
When connecting a coil surge protection
circuit to these relays, we recommend a
zener diode with a zener voltage of 24 V
or higher, or a resistor (680Ω to 1,000Ω).
When a diode is connected to the coil in
parallel, the release time will slow down
and working life may shorten. Before use,
please check the circuit and verify that
the diode is not connected in parallel to
the coil drive circuit.
2) 24 V models
When connecting a coil surge protection
circuit to these relays, we recommend a
zener diode with a zener voltage of 48 V
or higher, or a resistor (2,800Ω to
4,700Ω).
When a diode is connected to the coil in
parallel, the release time will slow down
and working life may shorten. Before use,
please check the circuit and verify that
the diode is not connected in parallel to
the coil drive circuit.
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明