DA2J001 [PANASONIC]
Silicon epitaxial planar type; 硅外延平面型
| 型号： | DA2J001 |
| 厂家： | 
PANASONIC |
| 描述： | Silicon epitaxial planar type |
| 文件： | 总3页 (文件大小：200K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
This product complies with the RoHS Directive (EU 2002/95/EC).
DA2J001 (Tentative)
Silicon epitaxial planar type
For band switching
Absolute Maximum Ratings Ta = 25°C
ꢀPackage
ꢀCode
Parameter
Symbol
Rating
35
Unit
V
SMini2-F5-B
ꢀPin Name
1: Cathode
2:Anode
Reverse voltage
Forward current
VR
IF
100
mA
°C
Operating ambient temperature *
Storage temperature
Topr
–25 to +85
–55 to +150
T
stg
°C
ꢀMarking Symbol: D1
Note) : Maximum ambient temperature during operation.
*
Electrical Characteristics Ta = 25°C
Parameter
Symbol
Conditions
Min
Typ
Max
1.0
Unit
V
Forward voltage
Reverse current
VF
IR
IF = 100 mA
VR = 33 V
100
1.2
nA
pF
Ω
Diode capacitance
CD
rf
VR = 6 V, f = 1 MHz
Forward dynamic resistance *
IF = 2 mA, f = 100 MHz
0.85
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 100 MHz
3. : Measuring instrument: YHP 4191A RF IMPEDANCE ANALYZER
*
Publication date: October 2009
ZKF00136AED
1
This product complies with the RoHS Directive (EU 2002/95/EC).
DA2J001
SMini2-F5-B
Unit: mm
1.25 ±0.10
+0.05
−0.02
0.13
0.35 ±0.05
2
0 to 0.05
1
0.50 ±0.05
ZKF00136AED
2
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20080805
相关型号：
DA2J10800L
Silicon epitaxial planar type For small current recitification High reverse voltage VR
PANASONIC
©2020 ICPDF网 联系我们和版权申明