DSP2A-L-DC5V-R [PANASONIC]

Electromechanical Relay, DPST, Latched, 6.5VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output;


型号：	DSP2A-L-DC5V-R
厂家：	PANASONIC
描述：	Electromechanical Relay, DPST, Latched, 6.5VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
文件：	总7页 (文件大小：1634K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DSP

1a 8A, 1a1b/2a 5A

small polarized power

relays

DS-P RELAYS

4. High breakdown voltage

Breakdown voltage has been raised by

keeping the coil and contacts separate.

TYPICAL APPLICATIONS

1. Office and industrial electronic

devices

Between contact

Between contacts

and coil

2. Terminal devices of information

processing equipment, such as

printer, data recorder.

3. Office equipment (copier, facsimile)

4. Measuring instruments

5. NC machines, temperature

controllers and programmable logic

controllers.

3,000 Vrms for 1 min.

5,000 V surge

1,000 Vrms for 1 min.

1,500 V surge

breakdown voltage

Conforms with FCC Part 68

5. Latching types available

6. Wide variation

FEATURES

Three types of contact arrangement

are offered: 1a, 2a, and 1a1b. In

addition, each is available in standard

and reversed polarity types.

7. Sealed construction allows

automatic washing

1. Compact with high contact rating

Even with small 10 mm .394 inch (H) x

11 mm .433 inch (W) x 20 mm .787 inch

(L) (dimensions, high capacity

switching is provided: 1a, 8 A 250 V

AC; 2a and 1a1b, 5 A 250 V AC.

2. High switching capability

High contact pressure, low contact

bounce, and wiping operation improve

resistance to weld bonding. Resistant

against lamp load and dielectric

loading: 1a achieves maximum

switching capacity of 2,000 VA

(8A 250 V AC).

8. Complies with safety standards

- Complies with Japan Electrical Appli-

ance and Material Safety Law

requirements for operating 200 V

power supply circuits

- Complies with UL, CSA and TÜV

safety standards

- Complies with EN 60335 / GWT (test

report available)

3. High sensitivity

Using the same type of high-

9. Creepage distance and clearances

between contact and coil: 3.5 mm

10. Sockets are available.

performance polar magnetic circuits as

DS relays, by matching the spring load

to the magnetic force of attraction,

greater sensitivity has been achieved.

The resultant pick up sensitivity of

about 190 mW makes possible direct

driving of transistors and chips.

ORDERING INFORMATION

DSP

Contact arrangement

1a: 1 Form A

1: 1 Form A 1 Form B

2a: 2 Form A

Operating function

Nil: Single side stable

L: 1 coil latching

L2: 2 coil latching

Coil voltage

DC 3, 5, 6, 9, 12, 24 V

Polarity

Nil: Standard polarity

R: Reverse polarity

Contact material

G AgSnO2 type

F: 1 Form A 1 Form B

Nil: 1 Form A, 2 Form A

Notes: 1. Reverse polarity types available (add suffix-R)

2. UL/CSA, TÜV approved type is standard.

ds_61A05_en_dsp: 070313D

DSP

TYPES

Single side stable

Part No.

1 coil latching

Part No.

2 coil latching

Part No.

Contact

Nominal coil

voltage

arrangement

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

DSP1a-DC3V

DSP1a-DC5V

DSP1a-DC6V

DSP1a-DC9V

DSP1a-DC12V

DSP1a-DC24V

DSP1-DC3V-F

DSP1-DC5V-F

DSP1-DC6V-F

DSP1-DC9V-F

DSP1-DC12V-F

DSP1-DC24V-F

DSP2a-DC3V

DSP2a-DC5V

DSP2a-DC6V

DSP2a-DC9V

DSP2a-DC12V

DSP2a-DC24V

DSP1a-L-DC3V

DSP1a-L-DC5V

DSP1a-L-DC6V

DSP1a-L-DC9V

DSP1a-L-DC12V

DSP1a-L-DC24V

DSP1-L-DC3V-F

DSP1-L-DC5V-F

DSP1-L-DC6V-F

DSP1-L-DC9V-F

DSP1-L-DC12V-F

DSP1-L-DC24V-F

DSP2a-L-DC3V

DSP2a-L-DC5V

DSP2a-L-DC6V

DSP2a-L-DC9V

DSP2a-L-DC12V

DSP2a-L-DC24V

DSP1a-L2-DC3V

DSP1a-L2-DC5V

DSP1a-L2-DC6V

DSP1a-L2-DC9V

DSP1a-L2-DC12V

DSP1a-L2-DC24V

DSP1-L2-DC3V-F

DSP1-L2-DC5V-F

DSP1-L2-DC6V-F

DSP1-L2-DC9V-F

DSP1-L2-DC12V-F

DSP1-L2-DC24V-F

DSP2a-L2-DC3V

DSP2a-L2-DC5V

DSP2a-L2-DC6V

DSP2a-L2-DC9V

DSP2a-L2-DC12V

DSP2a-L2-DC24V

1 Form A

1 Form B

2 Form A

Standard packing: Carton: 50 pcs.; Case: 500 pcs.

Note: Reverse polarity type are manufactured by lot upon receipt of order. Self-clinching types are also available, please consult us.

RATING

1. Coil data

1) Single side stable

Nominal operating

current

[10%] (at 20C 68F)

Nominal coil

voltage

Pick-up voltage

(at 20C 68F)

Drop-out voltage

(at 20C 68F)

Coil resistance

[10%] (at 20C 68F)

Nominal operating

Max. allowable voltage

power

(at 20C 68F)

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

100mA

60mA

30

83

120

270

480

1,920

80%V or less of

nominal voltage

(Initial)

10%V or more of

nominal voltage

(Initial)

50mA

130%V of

nominal voltage

300mW

33.3mA

25mA

12.5mA

2) 1 coil latching

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)

Nominal operating

power

Nominal coil

voltage

Pick-up voltage

(at 20C 68F)

Reset voltage

(at 20C 68F)

Max. allowable voltage

(at 20C 68F)

Set coil

50mA

Reset coil

50mA

Set coil

60

Reset coil

60

167

240

540

Set coil

Reset coil

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

30mA

167

240

540

960

3,840

80%V or less of

nominal voltage

(Initial)

80%V or less of

nominal voltage

(Initial)

25mA

130%V of

nominal voltage

150mW

16.7mA

12.5mA

6.3mA

16.7mA

12.5mA

6.3mA

960

3,840

3) 2 coil latching

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)

Nominal operating

power

Nominal coil

voltage

Set voltage

(at 20C 68F)

Reset voltage

(at 20C 68F)

Max. allowable voltage

(at 20C 68F)

Set coil

100mA

60mA

Reset coil

100mA

60mA

Set coil

30

83

120

270

480

1,920

Reset coil

30

83

120

270

480

1,920

Set coil

Reset coil

3V DC

5V DC

6V DC

9V DC

12V DC

24V DC

80%V or less of

nominal voltage

(Initial)

80%V or less of

nominal voltage

(Initial)

50mA

130%V of

nominal voltage

300mW

33.3mA

25mA

33.3mA

25mA

12.5mA

ds_61A05_en_dsp: 070313D

DSP

2. Specifications

Characteristics

Item

Specifications

1 Form A 1 Form B

Arrangement

1 Form A

2 Form A

Contact

Initial contact resistance, max.

Contact material

Max. 30 m (By voltage drop 6 V DC 1A)

Au-flashed AgSnO²type

Nominal switching capacity (resistive load)

Max. switching power (resistive load)

Max. switching voltage

8 A 250 V AC, 5A 30V DC

2,000 VA, 150 W

5 A 250 V AC, 5 A 30 V DC

1,250 VA, 150 W

250 V AC, 125 V DC

5 A AC, DC

Rating

Max. switching current

8 A AC, 5 A DC

Nominal operating power

Min. switching capacity (Reference value)*¹

Single side stable, 2 coil latching: 300 mW. 1 coil latching: 150mW

10m A 5 V DC

Min. 1,000M (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

Insulation resistance (Initial)

Between open contacts

1,000 Vrms for 1min. (Detection current: 10mA.)

2,000 Vrms (1 Form A 1 Form B, 2 Form A) (Detection current: 10mA.)

3,000 Vrms for 1min. (Detection current: 10mA.)

Breakdown voltage

Between contact sets

(Initial)

Between contact and coil

Electrical

characteristics

Surge breakdown

between contacts and coil

voltage*²

5,000 V

Temperature rise (at 65C 149F)

Max. 55C

Max. 40C

Max. 55C

Operate time [Set time] (at 20C 68F)

Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)

Max. 5 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)

(without diode)

Release time [Reset time] (at 20C 68F)

Functional

Shock resistance

Min. 196 m/s²(Half-wave pulse of sine wave: 11 ms; detection time: 10s.)

Min. 980 m/s²(Half-wave pulse of sine wave: 6 ms.)

10 to 55 Hz at double amplitude of 2 mm (Detection time: 10s.)

10 to 55 Hz at double amplitude of 3.5 mm

Destructive

Mechanical

characteristics

Functional

Vibration resistance

Destructive

Mechanical

Electrical

Min. 510⁷(at 180 times/min.)

Expected life

Conditions

Min. 10⁵(resistive load)

Ambient temperature:

–40C to +60C

Ambient temperature:

–40C to +65C

–40F to +149F

Ambient temperature:

–40C to +60C

Conditions for operation, transport and storage*³

(Not freezing and condensing at low temperature)

–40F to +140F

250C 482F (10s), 300C 572F (5s), 350C 662F (3s)

Solder heating

(Soldering depth: 2/3 terminal pitch)

Max. operating speed

3 cps

Unit weight

Notes:

Approx. 4.5 g .16 oz

*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the

actual load.

*2 Wave is standard shock voltage of 1.250s according to JEC-212-1981

*3 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.

REFERENCE DATA

1. Max. switching capacity

2.-(1) Life curve (1 Form A 1 Form B)

2.-(2) Life curve (1 Form A 1 Form B)

AC resistive

load (1a)

100

30 V DC resistive

AC resistive

load

265 V-130 V AC cosϕ = 1

(1a1b,2a)

DC resistive

load (1a)

30 V DC L/R = 7 ms

265 V-130 V AC

cosϕ = 0.4

DC resistive load

(1a1b,2a)

0.5

0.1

100

1000

Switching capacity, A

Contact voltage, V

ds_61A05_en_dsp: 070313D

DSP

3.-(1) Coil temperature rise (1 Form A)

Tested sample: DSP1a-DC12V, 5 pcs.

3.-(2) Coil temperature rise

(1 Form A 1 Form B)

Tested sample: DSP1-DC12V, 5 pcs.

3.-(3) Coil temperature rise (2 Form A)

Tested sample: DSP2a-DC12V, 5 pcs.

100

120

100

120

100

120

Coil applied voltage, %V

4.-(1) Operate & release time

(without diode, 1 Form A)

Tested sample: DSP1a-DC12V, 5 pcs.

4.-(2) Operate & release time

(without diode, 1 Form A 1 Form B)

Tested sample: DSP1-DC12V, 5 pcs.

4.-(3) Operate & release time

(without diode, 2 Form A)

Tested sample: DSP2a-DC12V, 5 pcs.)

Operate time

Max.

Min.

Max.

Release time

Min.

Release time

Max.

Min.

100

120

100

110

100

120

Coil applied voltage, %V

4.-(4) Operate & release time

(with diode, 1 Form A)

Tested sample: DSP1a-DC12V, 5 pcs.

4.-(5) Operate & release time

(with diode, 1 Form A 1 Form B)

Tested sample: DSP1-DC12V, 5 pcs.

4.-(6) Operate & release time

(with diode, 2 Form A)

Tested sample: DSP2a-DC12V, 5 pcs.

Operate time

Max.

Min.

Max.

Min.

Max.

Min.

Release time

100

Release time

100

120

110

120

Coil applied voltage, %V

5.-(1) Change of pick-up and drop-out voltage

(1 Form A)

5.-(2) Change of pick-up and drop-out voltage

(1 Form A 1 Form B)

5.-(3) Change of pick-up and drop-out voltage

(2 Form A)

Tested sample: DSP1a-DC12V, 5 pcs.

Tested sample: DSP1-DC12V, 5 pcs.

Tested sample: DSP2a-DC12V, 5 pcs.

Drop-out

voltage

Pick-up voltage

Drop-out

voltage

Pick-up voltage

-40 -20

20 40 60

Ambient

temperature, °C

20 40 60 80

Ambient

20 40 60 80

Ambient

temperature, °C

Drop-out voltage

-50

ds_61A05_en_dsp: 070313D

DSP

6.-(1) Influence of adjacent mounting

(1 Form A)

6.-(2) Influence of adjacent mounting

(1 Form A 1 Form B)

6.-(3) Influence of adjacent mounting

(2 Form A)

Tested sample: DSP1a-DC12V, 5 pcs.

Tested sample: DSP1-DC12V, 5 pcs.

Tested sample: DSP2a-DC12V, 5 pcs.

Pick-up voltage

A, C

relays

are not

energized

are not

energized

are not

energized

-2

A, C

Drop-out voltage

relays

are

relays

are

relays

are

-4

energized

-6

-8

-10

Inter-relay distance ( ), mm

DIMENSIONS(mm inch)

Download CCAADD DDaattaa from our Web site.

1. 1 Form A type

Single side stable

2 coil latching

External dimensions

2 coil latching

4-1.2 dia.

6-1.2 dia.

Single side stable

CAD Data

4-.047 dia.

6-.047 dia.

2.54

.100

2.54

.100

20.2

11.0

.433

.795

10.0

10.5

10.0

.394

2.54

.100

2.54

.100

10.5

.413

.394

.413

Tolerance: 0.1 .004

Schematic (Bottom view)

0.3

1.0

0.3

3.5

.012

.039

.012

.138

1.0

0.8

.031

0.8

.031

.039

.031

1.21

Single side stable

2 coil latching

7.2

7.62

.300

.048

.283

15 16

2.54

.100

10.16

7.62

.300

7.62

.300

7.62

.400

.300

General tolerance: 0.3 .012

PC board pattern (Bottom view)

(Deenergized condition)

(Reset condition)

2. 1 Form A 1 Form B type

Single side stable

2 coil latching

External dimensions

6-1.2 dia.

8-1.2 dia.

Single side stable

2 coil latching

CAD Data

6-.047 dia.

8-.047 dia.

20.2

11.0

.433

2.54×3

2.54×3 2.54×3 2.54

.100×3 .100×3 .100

2.54×4

.795

.100×3 .100×4

10.0

.394

10.0

.394

2.54×3

.100×3

2.54×3

.100×3

10.5

.413

10.5

.413

Tolerance: 0.1 .004

Schematic (Bottom view)

0.3

1.0

0.3

3.5

.012

.039

.012

.138

1.0

.039

0.8

.031

0.8

.031

1.21

7.2

7.62

.300

.048

Single side stable

2 coil latching

.283

2.54

.100

15 16

10.16

7.62

.300

7.62

.400

.300

General tolerance: 0.3 .012

PC board pattern (Bottom view)

(Deenergized condition)

(Reset condition)

ds_61A05_en_dsp: 070313D

DSP

3. 2 Form A type

Single side stable

2 coil latching

External dimensions

2 coil latching

6-1.2 dia.

8-1.2 dia.

Single side stable

CAD Data

6-.047 dia.

8-.047 dia.

20.2

11.0

.433

2.54×3

2.54×3 2.54×3 2.54

.100×3 .100×3 .100

2.54×4

.795

.100×3 .100×4

10.0

10.5

10.0

.394

2.54×3

.100×3

2.54×3

.100×3

10.5

.413

.394

.413

Tolerance: 0.1 .004

Schematic (Bottom view)

0.3

1.0

0.3

3.5

.012

.039

.012

.138

1.0

.039

0.8

.031

0.8

.031

1.21

7.2

7.62

.300

.048

Single side stable

2 coil latching

.283

2.54

.100

15 16

10.16

7.62

.300

7.62

.300

7.62

.400

.300

General tolerance: 0.3 .012

PC board pattern (Bottom view)

(Deenergized condition)

(Reset condition)

SAFETY STANDARDS

UL/C-UL (Recognized)

Contact rating

CSA (Certified)

Contact rating

TÜV (Certified)

Item

File No.

E43028

File No.

Rating

8A 250V AC

LR26550

etc.

8A 250V AC

¹/6HP 125, 250V AC

5A 30V DC

B 02 10

13461 238

8A 250V AC (cos=1.0)

5A 250V AC (cos=0.4)

5A 30V DC

1 Form A

¹/6HP 125, 250V AC

5A 30V DC

E43028

5A 250V AC

LR26550

etc.

5A 250V AC

B 02 10

13461 238

5A 250V AC (cos=1.0)

3A 250V AC (cos=0.4)

5A 30V DC

1 Form A

1 Form B

¹/6HP 125, 250V AC

5A 30V DC

¹/6HP 125, 250V AC

5A 30V DC

5A 250V AC

¹/10HP 125, 250V AC

5A 30V DC

LR26550

etc.

5A 250V AC

¹/10HP 125, 250V AC

5A 30V DC

B 02 10

13461 238

5A 250V AC (cos=1.0)

3A 250V AC (cos=0.4)

5A 30V DC

2 Form A

* Remarks: The standard certified for may differ depending on where the product was manufactured.

NOTES

1. Soldering should be done under the

following conditions:

3. External magnetic field

5. When using, please be aware that

the a contact and b contact sides of 1

Form A and 1 Form B types may go on

simultaneously at operate time and

release time.

Since DY relays are highly sensitive

polarized relays, their characteristics will

be affected by a strong external magnetic

field. Avoid using the relay under that

condition.

250C 482F within 10 s

300C 572F within 5 s

350C 662F within 3 s

2. Cleaning

For automatic cleaning, the boiling

method is recommended. Avoid

ultrasonic cleaning which subjects the

relays to high frequency vibrations, which

may cause the contacts to stick.

It is recommended that a fluorinated

hydrocarbon or other alcoholic solvents

be used.

4. Coil operating power

Pure DC current should be applied to the

coil. The wave form should be

rectangular. If it includes ripple, the ripple

factor should be less than 5%.

However, check it with the actual circuit

since the characteristics may be slightly

different.

For Cautions for Use, see Relay Technical Information.

ds_61A05_en_dsp: 070313D

DSP

SOCKETS FOR

DS-P RELAYS

ACCESSORIES

TYPES AND APPLICABLE RELAYS

For DSP1a

For DSP1a, DSP1, DSP2a

Type No.

Applicable relays

DSP1a relays

DSP1a-PS

DSP1a-PSL2

DSP2a-PS

DSP2a-PSL2

DSP1a-L2 relays

DSP1 relays

DSP1-L2 relays

DSP2a relays

DSP2a-L2 relays

SPECIFICATIONS

Item

Specifications

3,000 Vrms between terminals

(Except for the portion between coil terminals)

Breakdown voltage

Insulation resistance

Heat resistance

1,000 M between terminals at 500 V

150C for 1 hour

Max. continuous current

8 A

DIMENSIONS (Unit: mm inch)

DSP1a-PS, DSP1a-PSL2

DSP2a-PS, DSP2a-PSL2

External dimensions

11 0.6

.433 .024

2.54

.100

2.54

.100

23 0.6

.906 .024

1.2 dia.

047 dia.

1.2 dia.

047 dia.

2.54

.100

2.54

.100

Terminal No.2 and 15 are for

DSP1a-PSL2 only.

Terminal No.2 and 15 are for

DSP2a-PSL2 only.

17 0.6

.669 .024

5.7 0.3

3.7

.224 .012 .146

0.8 0.1

0.65 0.1

.031 .004

2.54 0.3

.100 .012

0.3 0.1

.026 .004

.012 .004

7.62 0.3

2.61

.103

7.62 0.3 10.16 0.3

.300 .012 .400 .012

.300 .012

PC board pattern (Bottom view)

FIXING AND REMOVAL METHOD

1. Match the direction of relay and

socket.

3. Remove the relay, applying force in the

direction shown below.

4. In case there is not enough space for

finger to pick relay up, use screw drivers

in the way shown below.

2. Both ends of relays are fixed so tightly

that the socket hooks on the top surface

of relays.

Notes: 1. Exercise care when removing relays. If

greater than necessary force is applied at

the socket hooks, deformation may alter the

dimensions so that the hook will no longer

catch, and other damage may also occur.

2. It is hazardous to use IC chip sockets.

Good

No good

ds_61A05_en_dsp: 070313D

DSP2A-L-DC5V-R [PANASONIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E