DZ2U20000L [PANASONIC]

VOLTAGE REGULATOR DIODE,;


型号：	DZ2U20000L
厂家：	PANASONIC
描述：	VOLTAGE REGULATOR DIODE, 二极管
文件：	总3页 (文件大小：295K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DZ2U20000L

Silicon epitaxial planar type

Unit: mm

For constant voltage

For surge absorption circuit

 Features

 Excellent rising characteristics of zener current I_Z

 Low zener operating resistance R_Z

 Halogen-free / RoHS compliant

(EU RoHS / UL-94 V-0 / MSL: Level 1 compliant)

 Marking Symbol: Z

 Packaging

DZ2U20000L Embossed type (Thermo-compression sealing): 10000 pcs / reel (standard)

1: Cathode

2: Anode

 Absolute Maximum Ratings T_a= 25°C

Parameter

Symbol

I_FRM

P_T

Rating

200

Unit

Panasonic

USSMini2-F2-B

Repetitive peak forward current

JEITA

Code

SC-116A

SOD-923

Total power dissipation ^*

120

Electrostatic discharge ^*

ESD

T_j

±8

Junction temperature

Storage temperature

150

°C

–55 to +150

°C

stg

Note) 1: Mounted on glass epoxy print board. (45 mm × 45 mm × 1 mm)

Solder in (Recommended land pattern)

2: Test method:IEC61000-4-2 (C = 150 pF, R = 330 Ω, Contact discharge:10 times)

 Electrical Characteristics T_a= 25°C±3°C

Parameter

Forward voltage

Symbol

Conditions

Min

Typ

Max

1.0

Unit

V_F

V_Z

R_Z

I_R

I_F= 10 mA

I_Z= 5 mA

V_R= 15 V

I_Z= 5 mA

1, 2

Zener voltage ^*

19.00

21.00

Zener operating resistance

Reverse current

Ω

0.05

Temperature coeﬃcient of zener voltage ^*

S_Z

18.4

mV/°C

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.

2. Absolute frequency of input and output is 5 MHz.

3. 1: The temperature must be controlled 25°C for V measurement. V value measured at other temperature must be adjusted to V (25°C)

2: V guaranteed 20 ms after current ﬂow.

3: T = 25°C to 150°C

Publication date: June 2019

Ver. BED

DZ2U20000L

Unit: mm

USSMini2-F2-B

 Land Pattern (Reference) (Unit: mm)

Ver. BED

Request for your special attention and precautions

in using the technical information and semiconductors described in this book

(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the

laws and regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2) The technical information described in this book is intended only to show the main characteristics and application circuit

examples of the products. No license is granted in and to any intellectual property right or other right owned by

Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the

infringement upon any such right owned by any other company which may arise as a result of the use of technical

information de-scribed in this book.

(3) The products described in this book are intended to be used for general applications (such as office equipment,

communications equipment, measuring instruments and household appliances), or for specific applications as expressly

stated in this book.

Please consult with our sales staff in advance for information on the following applications, moreover please exchange

documents separately on terms of use etc.: Special applications (such as for in-vehicle equipment, airplanes, aerospace,

automotive equipment, traffic signaling equipment, combustion equipment, medical equipment and safety devices) in

which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly

jeopardize life or harm the human body.

Unless exchanging documents on terms of use etc. in advance, it is to be understood that our company shall not be held

responsible for any damage incurred as a result of or in connection with your using the products described in this book

for any special application.

(4) The products and product specifications described in this book are subject to change without notice for modification

and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-

to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating

conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed

the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Other-

wise, we will not be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of break down

and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design,

arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages,

for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors

(ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. We do

not guarantee quality for disassembled products or the product re-mounted after removing from the mounting board.

When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed

time since first opening the packages.

(7) When reselling products described in this book to other companies without our permission and receiving any claim of

request from the resale destination, please understand that customers will bear the burden.

(8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our

company.

No.010618

相关型号：