EKMC2610111K [PANASONIC]

VZ 系列;


型号：	EKMC2610111K
厂家：	PANASONIC
描述：	VZ 系列
文件：	总10页 (文件大小：589K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

1.Product Name

PIR MOTION SENSOR “PaPIRs”

VZ series・Flat square type (170μA / Analog output)

2.Model Number

Lens Color

Model Number

EKMC2610111K

EKMC2610112K

EKMC2610113K

White

Black

Pearl White

Marking

3.Dimensions

Top VIEW

K 0 45

b) c)

a) The Marking which was

shown by a list shown below

Marking

Model Number

EKMB111011□

EKMB121011□

Side VIEW

EKMB131011□K

EKMC161011□

EKMC261011□K

b) Last-digit of the year

(Ex:2020=0,2021=1,…)

c) Lot No.

1^stweek of Jan. will be 01,

and further No. of 02,03,

will continue up to 53.

Bottom VIEW

General Tolerance ±0.5mm (±0.020inch)

Approved by

Checked by

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

4.Characteristics

4-1 Detection Performance

Conditions for measuring: Ambient temperature=25℃(77ﾟF) Operating voltage=5VDC

Value

Conditions concerning the target

(Note 1)

Detection Sensitivity

1.The temperature difference between

the target and the surroundings should

be superior to 4℃.(7.2ﾟF)

±0.22V≦

Horizontal

90ﾟ(±45ﾟ)

2.Movement speed: 1.0m/s

3.Target concept is human body

(Size:Around 700×250mm)

4.Detection range is 5m.

Detection

Area

Vertical

Detection zones

Note 1:The detection range is about 5m however, depending on the target’s speed and its temperature

difference with the surroundings, detection can occur at a range superior to the value above.

Therefore, before using, please confirm the detection characteristics under the usage environment.

4-2 Maximum Rated Values

Value

Unit

Power Supply Voltage

Usable Ambient Temperature

Storage Temperature

-0.3～7.0

VDC

-20～+60℃ (-4～+140ﾟF)

Do not use in a freezing or

condensation environment

-20～+70℃ (-4～+158ﾟF)

4-3 Electrical Characteristics

Conditions for Measuring: Ambient temperature：25℃(77ﾟF)

Subject

Symbol

Vdd

Min

3.0

Avg.

Max

5.5

Unit Special mention

Operating Voltage

－

VDC

μA

－

Iout=0

－

Electrical Current Consumption

Output Current

－

170

－

350

200

Iout

μA

High

Low

1.9

－

Analog Output

Saturated Voltage

－

1.0

－

1.1

0.2

－

Steady-state output

voltage when not

detecting.

Output offset average voltage

Steady-state noise

Vos

1.2

150

－

Circuit Stability Time

Twu

－

(when voltage is applied)

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

4-4 Timing Chart

Power

Supply

OFF

Present

Absent

Detecting

Target

Output

Voltage

V out

Vos

OFF

Twu

【Durations】

Twu:Circuit Stability Time=About 30s. (max.)

During this stage, the output’s status is undefined (ON/OFF) and detection is therefore

not guaranteed.

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

4-5 Detection Area Image

Vertical

Horizontal

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

4-6 Wiring Diagram

Vdd

Sensor

＋

GND

OUT

Microcomputer,

A/D Converter,

Etc.

Iout：Max.200μA

In this

direction, no

detection

problem

4-7 Mounting Directions

1) Direction

As detailed on the diagram, please install

the sensor so that the expected

trespassing direction corresponds to

the axis X or axis Y.

In some cases, going back and forth towards the

sensor (parallel movement to the axis Z), may

not be detected.

In this

direction,

detection is

uncertain.

Target

2) Detection Area

As shown on the diagram, the detection zone is

polarized.

If a target enters the detection zones + and – at

the same time, the signals are respectively

cancelled and detection could become impossible

at maximum detection range.

－

＋

－

＋

(Please refer to the detection area diagram in 4-5

for details)

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

5. Safety Precautions

Head the following precautions to prevent injury or accidents.

1) Do not use these sensors under any circumstance in which the range of their ratings,

environment conditions or other specifications are exceeded.

Using the sensors in any way which causes their specifications to be exceeded may

generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the

circuitry and possibly causing an accident.

2) Our company is committed to making products of the highest quality and reliability.

Nevertheless, all electrical components are subject to natural deterioration, and durability of

a product will depend on the operating environment and conditions of use. Continued use

after such deterioration could lead to overheating, smoke or fire. Always use the product in

conjunction with proper fire-prevention, safety and maintenance measures to avoid

accidents, reduction in product life expectancy or break-down.

3) Before connecting, check the pin layout by referring to the connector wiring diagram,

specifications diagram, etc., to verify that the connector is connected properly.

Mistakes made in connection may cause unforeseen problems in operation, generate

abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry.

4) Do not use any motion sensor which has been disassembled or remodeled.

5) Failure modes of sensors include short-circuiting, open-circuiting and temperature rises.

If this sensor is to be used in equipment where safety is a prime consideration, examine the

possible effects of these failures on the equipment concerned, and ensure safety by

providing protection circuits or protection devices.

Example :

・Safety equipments and devices

・Traffic signals

・Burglar and disaster prevention

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

6.Operating Precautions

6-1 Basic Principles

PaPIRs is a pyroelectric infrared sensor that detects variations in infrared rays.

However, it may not detect in the following cases: lack of movement, no temperature change in the

heat source. Besides, it could also detect the presence of heat sources other than a human body.

Efficiency and reliability of the system may vary depending on actual operating conditions:

1) Detecting heat sources other than the human body, such as:

a) small animals entering the detection area

b) When a heat source for example sun light, incandescent lamp, car headlights etc, or strong light

beam hit the sensor regardless inside or outside the detection area.

c) Sudden temperature change inside or around the detection area caused by hot or cold wind

from HVAC, or vapor from the humidifier, etc.

2) Difficulty in sensing the heat source

a) Glass, acrylic or similar materials standing between the target and the sensor may not allow

a correct transmission of infrared rays,

b) Non-movement or quick movements of the heat source inside the detection area.

(Please refer to 4-1 for details about movement speed.)

3) Expansion of the detection area

In case of considerable difference in the ambient temperature and the human body temperature,

detection area may be wider apart from the configured detection area.

4) Malfunction / Detection error

Unnecessary detection signal might be outputted, on rare occasions, come from sudden outbreak

output due to the nature of pyro-electric element. When the application does not accept such

condition strictly, please implement the countermeasure by introducing pulse count circuit etc.

6-2 Optimal Operating Environment Conditions

1) Temperature ： Please refer to the maximum rated values of 4-2.

2) Humidity Degree ：15～85% Rh (Avoid condensation or freezing of this product）

3) Pressure ： 86～106kPa

4) Overheating, oscillations, shocks can cause the sensor to malfunction.

5) This sensor is not waterproof or dustproof. Avoid use in environments subject to excessive

moisture, condensation, frost, containing salt air or dust.

6) Avoid use in environments with corrosive gases.

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

6-3 Handling Cautions

1) Do not solder with a soldering iron above 350℃（662ﾟF）, or for more than 3 seconds.

This sensor should be hand soldered.

2) To maintain stability of the product, always mount on a printed circuit board.

3) Do not use liquids to wash the sensor. If washing fluid gets through the lens, it can reduce

performance.

4) Do not use a sensor after it fell on the ground.

5) The sensor may be damaged by ±200 volts of static electricity. Avoid direct hand contact with

the pins and be very careful when operating the product.

6) When wiring the product, always use shielded cables and minimize the wiring length to prevent

noise disturbances.

7) The inner circuit board could be destroyed by a voltage surge. Use of surge absorption elements

is highly recommended.

Surge resistance ： below the power supply voltage value indicated in the maximum rated

values section.

8) Please use a stabilized power supply. Power supply noise can cause operating errors.

Noise resistance ： ±20V or less (Square waves with a width of 50ns or 1μs)

To reduce the effect of power supply noise, install a capacitor on the sensor’s power supply pin.

9) Operating errors can be caused by noise from static electricity, lightning, cell phone, amateur

radio, broadcasting offices etc…

10) Detection performance can be reduced by dirt on the lens, please be careful.

11) The lens is made of soft materials (Polyethylene). Please avoid adding weight or impacts that

might change its shape, causing operating errors or reduced performance.

12) Operating “temperatures” and “humidity level” are suggested to prolong usage. However, they do

not guarantee durability or environmental resistance. Generally, high temperatures or high

humidity levels will accelerate the deterioration of electrical components. Please consider both

the planned usage and environment to determine the expected reliability and length of life of the

product.

13) Do not attempt to clean this product with any detergent or solvent, such as benzene or alcohol,

as these can cause shape or color alterations.

14) Avoid storage in high, low temperature or liquid environments. As well, avoid storage in

environments containing corrosive gas, dust, salty air etc. It could cause performance

deterioration and the sensor’s main part or the metallic connectors could be damaged.

15) Storage conditions

Temperature:

Humidity:

+5 ～ +40℃(+41 ～ +104ﾟF)

30 ～ 75%

Please use within 1 year after products delivery.

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

7.When Designing Your Product

To ensure that the sensor’s detection capability corresponds to the specification, please install

the sensor in such a way that the rounded top of the lens protrudes at least 1mm above the

chassis (enclosure), see picture below.

Furthermore the hole in the chassis (enclosure) needs to take the sensor’s conical shape into

consideration.

When designing a PCB, make sure that the sensor’s back side and terminals do not come

into contact with wiring patterns to prevent short-circuits.

Recommended Hole Size

Chassis’s Hole-drilled Part

Detection range

Recommended PCB Pattern Diagram

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

Reference Specifications

Ver.1.2

Product Name

PIR MOTION SENSOR “PaPIRs”

Model No.

Page:

EKMC261011 K

8.Special Notice

This document is only for reference, so in the case of actual consideration and adoption, please order

the latest specification sheet.

As improvements are continually being made, the specifications or design of this product are subject

to change without notice.

Please strictly follow the “Safety Precautions” and “Operating Precautions” on the specifications sheet.

Normal functioning cannot be expected if used in environments or conditions other than those

specified above.

We are deeply committed to providing the highest quality control for this product.

Nevertheless:

1) For issues not addressed above, we invite you to share your suggestions, or

details about your company’s usage conditions, installation, specifications, needs of end users,

and applications for this sensor.

2) To reduce the risk of harm caused by product failure to human life or assets, this product should

always be used in conjunction with other safety measures, such as protective circuitry, double

layered circuit boards, etc., and used within the guaranteed performance, efficiency or special

characteristics values stated in the specification sheet.

3) This product is warranted for a period of one year, from date of delivery, applicable only if the

product is used in accordance with the precautions mentioned above and the specifications sheet.

We will replace or repair at the delivery location any malfunctioning or defective part or entire

product if such defect or malfunction is caused by us.

However, the above warranty shall be void in the following circumstances:

a) Damage caused to something else than the product itself.

b) Damage or loss resulting during transportation, storage or handling after the

date of supply.

c) Phenomenon unforeseeable in the state of the technology as of the supply date.

d) Damage caused by natural or unnatural events such as fire, earthquake, flood,

or conflicts beyond our control.

Issued on Dec. 1^st,2021

(SKC0410-P01,02,140701)

EKMC2610111K [PANASONIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E