ERJ3EKF1301B [PANASONIC]

Fixed Resistor, Metal Glaze/thick Film, 0.063W, 1300ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP;


型号：	ERJ3EKF1301B
厂家：	PANASONIC
描述：	Fixed Resistor, Metal Glaze/thick Film, 0.063W, 1300ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP
文件：	总5页 (文件大小：386K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Precision Thick Film Chip Resistors

ERJ R: 0402, 0603, 0805

ERJ E: 0603, 0805, 1206,

1210, 1812

Type: ERJ 2R, 3R, 6R

ERJ 3E, 6E, 8E, 14, 12

n Features

l Small size and lightweight

l Marking

Four digit marking of resistance value on resistive

element side (except 2R, 3R, 6R, 3E Type)

The power rating for one-K size larger is available

for 3E, 6E, 8E type

l High reliability

Metal glaze thick film resistive element and three

layered electrodes.

l Compatible with placement machines

l Low Resistance Tolerance

Bulk, taping and magazine packaging available

ERJ2R, 3E, 6E, 8E, 14, 12 Series ...

ERJ2R, 3R, 6R Series ......................

l Suitable for both reflow soldering and flow soldering

0.5%

l Approved under the ISO 9001 system

Approved under the QS-9000 system

l Reference Standards

IEC 60115-8, JIS C 5201-8

n Explanation of Part Numbers (ERJ2R, 3R, 6R Series, ±0.5 % type)

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

Precision Thick Film Chip Resistors

n Explanation of Part Numbers (ERJ2R, 3E, 6E, 8E, 14, 12 Series, ±1 % type)

n Construction

n Dimensions in mm (not to scale)

Dimensions (mm)

Type

Weight

(inches)

(1000 pcs.)

ERJ2R

(0402)

1.00^±0.050.50^+0.050.20^±0.100.25^±0.050.35^±0.05

0.8 g

2 g

ERJ3R

(0603)

1.60^±0.150.80

0.30^±0.200.30^±0.150.45^±0.10

+0.15

Ð0.05

ERJ6R

(0805)

2.00^±0.201.25^±0.100.40^±0.200.40^±0.200.60^±0.10

4 g

ERJ3EK

(0603)

+0.15

1.60^±0.150.80

0.30^±0.200.30^±0.150.45^±0.10

2 g

Ð0.05

ERJ6EN

(0805)

2.00^±0.201.25^±0.100.40^±0.200.40^±0.200.60^±0.10

4 g

ERJ8EN

(1206)

+0.05

Ð0.20

+0.05

Ð0.15

3.20

1.60

0.50^±0.200.50^±0.200.60^±0.10

10 g

16 g

27 g

ERJ14N

(1210)

3.20^±0.202.50^±0.200.50^±0.200.50^±0.200.60^±0.10

4.50^±0.203.20^±0.200.50^±0.200.50^±0.200.60^±0.10

5.00^±0.202.50^±0.200.60^±0.200.60^±0.200.60^±0.10

ERJ12N

(1812)

ERJ12S

(2010)

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

Precision Thick Film Chip Resistors

n Ratings

T.C.R.

Limiting Element

Voltage (Maximum

RCWV)⁽¹⁾(V)

Resistance Ranges (W)

Type

Power Rating

at 70 ¡C (W)

Maximum Overload Resistance

Standard

´10^-6/ûC

(inches)

Voltage⁽²⁾(V)

Tolerance (%)

Resistance Values

min.

100

110 K

max.

100 K

1 M

(ppm/ûC)

±100

±50

±100

±50

±100

±50

ERJ2R

(0402)

0.063

0.1

100

±0.5

E24

ERJ3R

(0603)

100

200

100

110 K

100 K

1 M

E24

ERJ6R

(0805)

150

100

110 K

100 K

1 M

±100

ERJ2RK

(0402)

0.063

(0.1)

0.1

100

200

400

±1

1 M

±100

E24

ERJ3EK

(0603)

1 M

E24,E96

]

ERJ6EN

(0805)

150

200

2.2 M

1 M

]

(0.125)

ERJ8EN

(1206)

0.125

]

(0.25)

ERJ14N

(1210)

0.25

0.5

ERJ12N, 12S

(1812), (2010)

1 M

(1) Rated Continuous Working Voltage (RCWV) should be determined from RCWV= Power Rating ´ Resistance Values, or Limiting Element Voltage

(max. RCWV) listed above, whichever is less.

(2) Overload (Short-time Overload) Test Voltage (SOTV) should be determined from SOTV=2.5 ´ Power Rating or max. Overload Voltage listed above

whichever is less.

] Please contact us when resistors guaranteed for high power are needed.

Power Derating Curve

For resistors operating in ambient temperature above

70 ¡C, power rating should be derated in accordance

with the figure to the right.

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

Precision Thick Film Chip Resistors

n Packaging Specifications

l Standard Quantity

Type

(inches)

Thickness

(mm)

Punched (Paper) Taping

(4 mm pitch)

Embossed Taping

Bulk Case

(4 mm pitch)

ERJ2R

0.35

0.45

0.6

10000 pcs./reel(2 mm pitch)

5000 pcs./reel

(0402)

ERJ3R

(0603)

ERJ6R

(0805)

5000 pcs./reel

ERJ2RK

(0402)

0.35

0.45

0.6

10000 pcs./reel(2 mm pitch)

5000 pcs./reel

ERJ3EK

(0603)

25000 pcs./case

10000 pcs./case

ERJ6EN

(0805)

5000 pcs./reel

ERJ8EN

(1206)

0.6

5000 pcs./reel

ERJ14N

(1210)

0.6

5000 pcs./reel

ERJ12N,12S

(1812), (2010)

0.6

(mm)

l Bulk Case

l Taping Reel

l Embossed Taping

Type

2R,3R,6R

3EK,6EN,

8EN,14N

Dimensions

(mm)

9.0^±1.011.4^±2.0

13.0^±1.015.4^±2.0

180.0_Ð⁰_3.060 min. 13.0^±1.0

12N, 12S

l Punched (Paper) Taping

Type

P₁

14N 2.80^±0.203.50^±0.208.00^±0.303.50^±0.05

Dimensions

(mm)

12N 3.50^±0.204.80^±0.20

12S 2.80^±0.205.30^±0.20

1.75^±0.104.00^±0.10

12.00^±0.305.50^±0.05

Type

P₂

P₀

fD₀

t₂

fD₁

14N

1 min.

Dimensions

(mm)

12N 2.00^±0.054.00^±0.101.50^+0.101.00^±0.10

1.5 min.

12S

Type

P₁

P₂

P₀

fD₀

0.70^±0.05

1.20^±0.05

1.90^±0.10

2.50^±0.20

3.60^±0.20

2.00^±0.10

0.52^±0.05

0.70^±0.05

Dimensions

(mm)

3R,3EK 1.10^±0.10

6R,6EN 1.65^±0.15

8.00^±0.20

3.50^±0.05

1.75^±0.10

4.00^±0.10

2.00^±0.05

4.00^±0.10

1.50^+0.10

0.84^±0.05

8EN

2.00^±0.15

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

Precision Thick Film Chip Resistors

n Recommended Land Pattern

In case of flow soldering, the land width must be smaller than the Chip Resistor width to control the solder amount

properly. Generally, the land width should be 0.7 to 0.8 times (W) of the width of chip resistor. In case of reflow soldering,

solder amount can be adjusted, therefore the land width should be set to 1.0 to 1.3 times chip resistor width (W).

Dimensions (mm)

Type

(inches)

ERJ2R

(0402)

0.5 to 0.6

1.4 to 1.6

0.4 to 0.6

ERJ3R, 3EK

(0603)

ERJ6R, 6EN

(0805)

ERJ8EN

(1206)

ERJ14N

(1210)

ERJ12N

(1812)

ERJ12S

(2010)

0.7 to 0.9

1 to 1.4

2 to 2.4

3.3 to 3.7

3.6 to 4

2 to 2.2

3.2 to 3.8

4.4 to 5

5.7 to 6.5

6.2 to 7

0.8 to 1

0.9 to 1.4

1.2 to 1.8

1.8 to 2.8

2.3 to 3.5

1.8 to 2.8

n Recommended Soldering Conditions

Recommendations and precautions are described below.

lRecommended soldering conditions for reflow

áReflow soldering shall be two times maximum.

áPlease contact us for additional information when

used in conditions other than those specified.

áPlease measure temperature of terminations and study

solderability for every kind of solder and board, before

actual use.

For soldering (Example : Sn/Pb)

Temperature

Time

Preheating

Main heating

Peak

140 ¡C to 160 ¡C

Above 200 ¡C

235 ± 5 ¡C

60 s to 120 s

30 s to 40 s

max. 10 s

For lead-free soldering (Example : Sn/Ag/Cu)

Temperature

150 ¡C to 180 ¡C

Above 230 ¡C

max. 260 ¡C

Time

Preheating

Main heating

Peak

60 s to 120 s

30 s to 40 s

max. 10 s

lRecommended soldering conditions for flow

For soldering

For lead-free soldering

Temperature

140 ¡C to 160 ¡C

245±5 ¡C

Time

60 s to 120 s

20 s to 30 s

Temperature

150 ¡C to 180 ¡C

max. 260 ¡C

Time

60 s to 120 s

max. 10 s

Preheating

Soldering

Safety Precautions

1. If transient load (heavy load in a short time) like pulse is to be applied, carry out an evaluation

and confirmation test with the resistors actually mounted on the board.

When a load of more than the rated power is applied under load condition at steady state, it

could impair performance and/or reliability of the resistor.

Never exceed the specified rated power.

2. Chlorine type or other highly-reactive flux is not recommended. Residue could affect performance or reliability of

the resistors.

3. When using a soldering iron, never let the tip of the soldering iron touch the body of the chip resistor. When

using a soldering iron with a tip at a high temperature, solder for as short time as possible (no more than three

seconds and up to 350 ¡C).

4. Avoid physical shock to the resistor and nipping of the resistor with hard tool ( pliers or tweezers) as it may

damage protective coating or the body of the resistor and may affect its performance.

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

相关型号：