ET-PFD310 [PANASONIC]
Frame;
| 型号： | ET-PFD310 |
| 厂家： | 
PANASONIC |
| 描述： | Frame |
| 文件： | 总1页 (文件大小：148K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S
P
E
C
F
I
L
E
Frame
ET-PFD310
Description
This frame is designed especially for use on the Panasonic’s applicable projector. The frame can also be used for a
dual stack configuration in which two projectors are used together.
Specifications
Dimensions (W × H × D):
596 × 322.5 × 656 mm
(23-15/32 × 12-11/16 × 25-13/16 inches)
Approximately 8.7 kg (19.2 lbs)
Weight*:
Applicable projector:
PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DS8500/
DW8300/DZ110X/DS100X/DW90X
Average value. May differ depending on the actual unit.
*
Parts
Frame (already assembled) . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 16) . . . . . . 5
Spring washers (M10) . . . . . . . . . . . . . . . . . . . . . 8
Hex bolts (M10 × 110) . . . . . . . . . . . . . . . . . . . . 4
Washers (M10) . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 8
Adjustment nuts (M10) . . . . . . . . . . . . . . . . . . . . 4
Caution:
•
•
•
•
Mounting should be done by a qualified technician.
Make sure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions thoroughly before starting.
Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
•
When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the frame attached to a projector.
596 (23-15/32)
610 (24-1/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of April 2013
1/1
SFD10A009-1
相关型号：
©2020 ICPDF网 联系我们和版权申明