FP0-E8XA_技术文档

FPS (Sigma) Series

Programmable Controllers

09/2008

FPS (Sigma)

The next generation compact PLC

Highlights

State-of-the-art PLC technology in the most compact size plus the ability to communicate via all important modern media

characterize the FPS (Sigma). With its two 100kHz pulse outputs, four high speed counters that function at up to 50kHz for

positioning applications, a programming memory capable of storing 32,000 steps, a real-time clock, and communication interfaces

for RS232C and RS485, FPS (Sigma) is one of the most flexible PLCs on the market. Remarkably, it is also one of the smallest!

Communication

Four quick and easy snap-on cassettes are available to add

different serial ports to the FPS (Sigma). All ports are capable of

communicating at speeds of up to 115.2kbps.

1-channel RS232C type

2-channel RS232C type

1-channel RS485 type

1-channel RS232C + 1-channel RS485 type

Positioning

In addition to a host of handy Panasonic functions, the FPS (Sigma)

also offers circular and linear interpolation. Circular interpolation can

be used for applications that apply glue, linear interpolation for pick &

place applications, for example. By combining the FPS (Sigma) with

servo motors, you can perform real 2-axis motion control.

Temperature control

FPS (Sigma)

Minas A4 Servo Drives

With the thermocouple input units and our accurate unique PID

and IPD algorithms, temperature can be controlled more easily and

accurately than ever.

Fast PID but

it overshoots

No overshoots

but slow

FPS (Sigma) example

fast and no overshoot

Other highlights

ꢀ High expansion capability with up to 384 I/Os

ꢀ Fastest processing time, 0.32µsec/basic command

ꢀ Compact design [30 x 90 x 60mm (WxHxD)]

ꢀ Large data memory of up to 2MByte

ꢀ Short circuit protected transistor outputs

ꢀ Built-in analog volume with two points

ꢀ Backup battery

09/2008

2

FPS (Sigma) CPUs

Outstanding performance in a compact design

(

)

(

)

FPS Sigma – Transistor output type

FPS Sigma

Relay output type

28 points

32 points

24 points

Input

Output (PNP)

12 points

Input

16 points

Output (NPN)

16 points

Input

Output

16 points

8 points

Connector type

FPG-C32T2H-A

Terminal type

FPG-C28P2H-A

FPG-C24R2H-A

(

)

(

)

FPS Sigma – Transistor output type with thermistor input

FPS Sigma –

Relay output type

with thermistor input

Temperature

control

80

70

60

50

40

30

10

0

28 points

32 points

24 points

Input

16 points

Output

Input

16 points

Output

Input

Output

12 points

16 points

8 points

2 Thermistor inputs

FPG-C28P2HTM

2 Thermistor inputs

FPG-C32T2HTM

2 Thermistor inputs

FPG-C24R2HTM

High expansion capability

FPS (Sigma) can use the expansion units of the FP0 on the right-hand side.

New FPS (Sigma) units can be added to the left-hand side.

Max. 4 expansion units

each 64 I/Os = 256 I/Os

CPU

Max. 3 expansion units

each 32 I/Os = 96 I/Os

max. 32 I/Os

Parallel

expansion

BUS

Serial

expansion

BUS

09/2008

3

FPS (Sigma) expansion units – left side

Wide variety of expansion units

(

)

FPS (Sigma)

I/O expansion unit

FPS Sigma

FPS (Sigma)

Memory expansion unit

I/O expansion unit

FPG-EM1

64 points

Input

Output (PNP)

32 points

Input

Output (NPN)

32 points

Memory: 256k words

FPG-EM1

32 points

MIL connector type

FPG-XY64D2P-A

MIL connector type

FPG-XY64D2T-A

FPS (Sigma) positioning expansion units RTEX

Real-time Ethernet system for Minas A4N servo drives

2-axis

4-axis

8-axis

FPG-PN2AN

FPG-PN4AN

FPG-PN8AN

FPS (Sigma) positioning expansion units

1-axis

2-axis

Transistor output

FPG-PP11

Line driver output

FPG-PP12

Transistor output

FPG-PP21

Line driver output

FPG-PP22

09/2008

4

FPS (Sigma) expansion units – left side

Wide variety of expansion units

(

)

FPS (Sigma)

PROFIBUS expansion unit

FPS Sigma

FPS (Sigma)

DeviceNet expansion unit

FPS (Sigma)

S-Link expansion unit

CANopen expansion unit

PROFIBUS Master

CANopen Master

DeviceNet Master

S-Link Master

FPG-DPV1-M

FPG-CAN-M

FPG-DEV-M

FPG-SL

FPS (Sigma)

FNS (Flexible Network Slave) unit

Network plug-in modules for

FPS (Sigma)

CC-Link slave expansion unit

FPS (Sigma) FNS unit

Flexible Network Slave

CC-Link Slave

PROFIBUS

Plug-in module

AFPN-AB6200

DeviceNet

Plug-in module

AFPN-AB6201

CANopen

Plug-in module

AFPN-AB6218

FPG-FNS

FPG-CCLS

Communication cassettes

FP memory loader

•ꢀ Read or write

programs from or

into a PLC

•ꢀ Personal computer is

not required

•ꢀ Applicable with FP0,

FPS (Sigma), FP-X ,

FP2 and FP2SH

1-channel RS232C type

2-channel RS232C type

1-channel RS485 type

1-channel RS232C type

+ 1-channel RS485 type

FPG-COM1

5-wire

FPG-COM2

3-wire

FPG-COM3

2-wire

FPG-COM4

2-wire

AFP8670

AFP8671

Data clear type

Data hold type

09/2008

5

FPS (Sigma) expansion units – right side

Wide variety of expansion units

A maximum of 3 FP0 expansion units can be added to the FPS (Sigma) CPU unit.

Digital I/O units

Relay output type

Input only type

Transistor output type

8 points

Input Output

4 points 4 points 8 points 8 points 16 points16 points

16 points

Input Output

32 points

Input Output

8 points

Input

8 points

16 points

Input

16 points

8 points

Output

8 points

16 points

Input Output

8 points 8 points

16 points

Output

16 points

32 points

Input Output

16 points16 points

FP0-E8RSA

FP0-E16RSA

FP0-E32RS

FP0-E8XA

FP0-E16XA

FP0-E8YPA (PNP) FP0-E16PA (PNP) FP0-E16YPA(PNP) FP0-E32PA (PNP)

FP0-E8YTA (NPN) FP0-E16TA (NPN) FP0-E16YTA (NPN) FP0-E32TA (NPN)

Option:

Output 8 points

FP0-E8YRSA

Analog I/O units

Temperature control units

3 points

4 points

8 points

4 points

8 points

6 points

Input Output

2 points 1 point

Output

4 points

Output

4 points

Input

8 points

Input

4 points

Input

8 points

Input

6 points

FP0-A21A

FP0-A04I

FP0-A04V

FP0-A80A

FP0-TC4

FP0-TC8

FP0-RTD6

•ꢀ Input (12bit):

10V, 0–5V,

0–20mA

•ꢀ K, J, T, R type thermocouples can be used

•ꢀ Resolution: 0.1°C

•ꢀ Pt100, Pt1000,

Ni1000

–

10V, 100mV

0–5V, 0–20mA

•ꢀ Temperature range:

-200 to 500°C

•ꢀ Accuracy: 0.8°C (R type: 3°C)

•ꢀ Temperature range: -100to1500°C

•ꢀ Output (12bit):

10V, 0–20mA

4–20mA

10V

AC power supply

Networking units

Output

24VDC/0,7A

Input

85 to 265VAC

Output

24VDC/2,1A

Input

85 to 265VAC

PROFIBUS

MEWNET-F

Ethernet

Terminal type

FP0PSA2

Terminal type

FPPS24050ED

FP0-DPS2

FP0-IOL

FPWEB2

(DP Slave) or

(MEWNET-F Slave)

Remote I/O

(Web-Server unit)

09/2008

6

FPS (Sigma)

Optimized communication function

Four types of communication

cassettes enable:

ꢁ Efficient connection to serial

devices.

ꢁ Transmission speeds of up to

115.2kbits/s.

ꢁ Long transmission distance of

up to 1200m.

ꢁ In addition, the green screw

terminal is removable for easy

wiring.

1-channel RS232C type FPG-COM1

2-channel RS232C type FPG-COM2

1-channel RS485 type FPG-COM3

1-channel RS232C + 1-channel RS485 type FPG-COM4

With the RS232C type communications cassette:

Image

processing device

FPS

Efﬁcient connection with other control devices helps to save space!

GT

ꢁ Enables connection to devices with RS232C interface, such as a programmable

display panel, image processing device and other devices.

touch terminal

ꢁ When used as a tool port, up to 3 external devices can be connected.

ꢁ A 2-channel type communication cassette is used.

RS232C

With the RS485 type communication cassette:

More links than you imagined a compact PLC could achieve

(2048 link relays / 256-word link data registers)

Link data register

Product type data

ꢁ Can be used to share product type data between different machines.

ꢁ Can be used for interlocking between different machines.

ꢁ Easy wiring between PLCs with twin-core cabling.

Process machine

Assembly machine

Inspection machine

RS485

Masterless communication using the FPS (Sigma)

ꢁ Even if a station goes into a power-off state, communications between

the other stations continue. The failed station can be integrated quickly

and smoothly into the network in the event of recurrence.

Link

station

Connection to external devices using RS485 interface

GT Touch Terminals

ꢁ Enables connection to external devices, such as temperature controllers

or Eco Power Meter, that are equipped with RS485 interface.

ꢁ Transmission speed: Max. 115.2kbits/s.

RS232C

RS485

ꢁ Transmission distance: Max. 1200m.

RS232C

ꢁ Control is possible using commercially available RS485 devices.

Temperature controller, Eco Power Meter

KT4H KW4M

09/2008

7

FPS (Sigma) positioning

Specially designed for positioning applications

Max. 100kHz pulse output performance is now standard.

Powerful device capable of linear interpolation and circular interpolation.

Pulse output max. 100kHz

Because command processing at speeds up to 100kHz is available,

Stepping motor

Servo motor

high-speed, high-precision positioning is enabled. Along with stepping

motor control, the specs also ensure plenty of scope for controlling

servo motors.

FP∑ (Sigma)

Pulse output CW

Pulse output CCW

Y0

Motor

driver

1

Y1

Pulse output CW

Pulse output CCW

Y3

Y4

Motor

driver

2

Possible to combine with pulse-train input drivers

Single unit enables two-axis control

5

Rapid 0.02ms start (when JOG operation controls are executed)

The time taken to execute the JOG operation, from the instant the trigger (execution condition) goes on to the time of pulse output,

is 0.02ms and 0.2ms even with trapezoidal control. Control time is reduced even for machines that quickly and repeatedly restart.

Linear interpolation and circular interpolation are built in

(FPG-C32T2H-A and FPG-C28P2H-A)

Linear Interpolation

Circular Interpolation

Adhesive

Interpolation functions enable simultaneous control of two axes.

Applications that a compact PLC couldn‘t previously cope with are

no longer a challenge.

And there’s more:

Smooth acceleration/deceleration

Support for CW/CCW method

You can choose to set either 30 or 60 steps of acceleration/

deceleration. This feature means you can achieve smoother

movement during long acceleration/ deceleration periods of

stepping motors.

Reduce overall costs by designing systems that combine with

servo motors and small stepping motors without support for

Pulse and Sign method.

The settings are there for a maximum 60 accelaration/

deceleration steps.

Motor

driver

Motor

driver

09/2008

8

FPS (Sigma) positioning

High-speed, high precision positioning

Programming with convenient and

easy-to-understand instructions

Selectable home return mode

ꢁ The home return method may be specified even in

situations such as when only a single sensor is being

used, depending on the design.

ꢁ When the home position return is completed, a deviation

counter clear signal can also be output.

ꢁ Uses a preset value table for starting speed, target speed,

acceleration/deceleration time, and other factors. Easy-to-

understand programming is possible since numbers can be

specified intuitively.

ꢁ Comes with dedicated instructions for each mode:

trapezoidal control, home return, JOG operation, free table

operation, linear interpolation, and circular interpolation.

Home position return

JOG operation

ꢁ Pulse output diagram

(when the home position proximity input is not used).

ꢁ Pulse output diagram.

Home sensor

ON

XA ON

ON

OFF

XB (JOG command)

2000Hz

300Hz

100Hz

0Hz

Y0 (Pulse)

0Hz

150ms

Home search automatically reverses the motor rotation when

Over limit input(+) or Over limit input (-) is input and their

searches for the home position or near home position in order

to return to it automatically.

This refers to an operation in which the motor is rotated only

while operation commands are being input. This is used to

forcibly rotate the motor using input from an external switch,

for instance when making adjustments. Depending on the

circumstances, unlimited feeding can be accomplished with

the JOG operation in some cases.

Linear interpolation

Circular interpolation

ꢁ Positioning Iocus.

ꢁ Center-radial

Current position S

(X 5000, Y 8660)

Y-axis

(CH2)

setting methods are

also available.

2000

θ

Center position O

(Xo,Yo)

Pass position P

5000

X-axis

(CH0)

(X 9396, Y -3420)

Target position E

(X 8660, Y -5000)

A control function that automatically defines the continuum of

points in a straight line based on only two coordinate positions.

Allows points to be smoothly traversed by arced paths for which

the user specifies the orientation plane, the radius of curvature,

motion path profile and direction of motion.

09/2008

9

FPS (Sigma) positioning expansion units

Precise positioning

Features

ꢁ Fast startup of 0.02 or 0.005ms makes cycle time reduction possible.

ꢁ Feedback pulse count function makes output pulse counting from external encoders possible.

ꢁ JOG positioning control supports a wide range of applications.

ꢁ 4 types of S-curve acceleration/deceleration control makes smooth startup and stopping possible:

Sine curve, quadratic curve, cycloid curve and cubic curve.

FPG-PP11

FPG-PP12

FPG-PP21

FPG-PP22

ꢁ The FPS (Sigma) positioning unit can handle simultaneous startup of multiple axes, enabling simultaneous control of linear

interpolation and other elements through user programs.

ꢁ Transistor output type (open collector) and line driver output type are available.

Unit type and product number

Type

Output type

Part number

FPG-PP11

FPG-PP21

FPG-PP12

FPG-PP22

1-axis type

2-axis type

Transistor output type

1-axis type Line driver output type

2-axis type Line driver output type

09/2008

10

FPS (Sigma) RTEX expansion units

RTEX multi-axis network servo system

The RTEX positioning units support Minas A4N network servo drives. A mutually optimized system consisting of PLC and servo

drive greatly simplifies installation.

FP3 positioning unit RTEX

Configuration example: 16 axes + I/O (256)

Monitor LEDs

Status display

Link status

Pulser input

terminal

Error display

Pulser input status

Network port

(Transmit)

Network port

(Receive)

FP dedicated expansion unit

Positioning unit

RTEX

FP /FP0 common

expansion unit

(Max. of 4 units in combination

with positioning unit)

Control unit

(Max. 2 units)

(Max. 3 units)

System configuration:

ꢁ Maximum number of control axes: 16 axes. Realization of highly accurate 2-axis circular interpolation, 3-axis linear

interpolation and 3-axis spiral interpolation with high-speed 100Mbps communication.

ꢁ With 3 types in the product range, for 2 axes, 4 axes and 8 axes, provides flexible support even for control of small

numbers of axes.

ꢁ By using loop wiring Realtime Express* provides high reliability by creating smooth communication conditions with

the data flow always in the same direction.

* Matsushita Electric Industrial network servo systems

Specifications:

2-axis type

4-axis type

FPG-PN4AN

8-axis type

Part number FP∑ (Sigma) / FP2

FPG-PN2AN

FPG-PN8AN

Control method

PTP Control, Cursor Path (CP) Control

2-axis/3-axis linear interpolation, 2-axis circular interpolation,

3-axis spiral interpolation

Interpolation control

Control units

Position data

Backup

Pulse/µm/inch/degree

600 points for each axis

Positioning control

functions

Parameters and data ﬁle can be saved to FROM

Acceleration/deceleration

method

Linear acceleration/deceleration/S-curve acceleration/deceleration

Acceleration/deceleration

time

0 to 10,000ms (1ms units) different settings for acceleration and deceleration

are possible

Positioning area

(-1,073,741,823 to 1,073,741,823 pulse) increment and absolute speciﬁcation

Supported with JOG operation (free run operation)

Origin proximity (DOG) search

Speed control functions

Origin functions

Search method

Creep speed

Free settings possible

Pulser input operation support

Other functions

Auxiliary output code, auxiliary output contact support

Dwell time support

Communication speed

Cable

100Mbps

Commercially available LAN straight cable (shielded category 5e)

Ring method

Connection method

Communication cycle/no. of terminals

Transmission distance

0.5ms; max. 8 axes/system (command cycle: 1ms)

Between terminals: 60m; total length: 200m

09/2008

11

Optimized temperature control

Functions convenient for temperature control are built in

The control unit with thermistor inputs enables temperature control

at low cost

Two thermistor inputs, which cost less than thermocouples,

can be connected to the FPS (Sigma) unit via thermistor inputs

(FPG-C28P2HTM, FPG-C32T2HTM and FPG-C24R2HTM).

FPS (Sigma) control unit that

FP¤ control unit that

accepts thermistors

Thermistor

Using a simple linearization command, measuring

the temperature by the thermistor can be programmed easily.

Four- and eight-channel type thermocouple input expansion unit

Up to three units can be added to each control unit, enabling temperature

control of up to 24 channels.

Advantages over multiple temperature controllers:

ꢁ Information collection and computer-based storage.

ꢁ On-site error monitoring using programmable display.

ꢁ Significant reduction in total costs.

ꢁ Power supply stabilisation by protecting synchronisation

between heater ON and OFF states.

ꢁ Temperature settings can be easily changed using batch function.

Optimized temperature control with PID and PWM instruction

Example of temperature control

with the auto-tuning function only

You can easily set multi-stage temperature control and time

control usually available only in high performance type

temperature controllers.

Various FPWIN Pro libraries simplify the programming of closed loop

controlled electrical installations and consequently save valuable human

resurce costs. The process and temperature control Library NCL-PTC-LIB,

for example, includes linear and non-linear controller types such as the

P/I/PI/PID controller and two-point / three-point controllers with and without

hysteresis. Functions for dead band, interpolation, ramp limiting, dead time

and averaging are also included.

09/2008

12

FP∑ (Sigma) data memory expansion unit

Data capacity expandable up to 256k words

Features

ꢁ Able to store 256k words, this memory unit is well-suited for storing remote monitoring logs.

ꢁ Take advantage of FPS’s (Sigma) memory for manufacturing systems that produce more than one model. With FPS’s (Sigma)

memory, you no longer need to download new production data every time you switch manufacturing process.

ꢁ Up to 4 units can be connected to the FPS (Sigma), allowing up to 1024k words to be stored.

General specifications

Item

Description

Ambient temperature/

humidity

0 to 55°C, 30 to 85% RH (no condensation)

Storage temperature/

humidity

-20 to +70°C, 30 to 85% RH (no condensation)

10 to 55Hz, 1 sweep/min.,

double amplitude of 0.75mm, 10min. on 3 axes

Vibration resistance

Shock resistance

Noise immunity

98m/s 2 or more, 4 times on 3 axes

1000V (P-P) with pulse width 50ns,

1µs (using a noise simulator)

Basic unit mass

Approx. 80g

The amount of increase in

control unit consumption

current

35mA or less (24VDC)

(100mA or less (internal 5VDC)

FPG-EM1

Performance specifications

Item

Description

Memory capacity

Battery life

256k words (1k words x 256 banks)

5 years or more

10 to 55Hz, 1 sweep/min.,

double amplitude of 100mA or less

5V Power consumption

Number of I/O points

Input 16 points

Programming tool FPWIN Pro

Instructions F150 and F151 are necessary for reading from

and writing to memory expansion units.

Data is read with the

F150 instruction.

Data is written with

the F151 instruction.

X0-7

X8-F

0

2

4

6

RUN

1

3

5

7

PROG.

ERROR

ALARM

8

9

A

B

RUN

C

E

D

F

PROG.

Y0-7

Y8-F

0

2

4

6

1

3

5

7

COM.1

S

R

COM.2

S

R

8

9

A

B

C

E

D

F

max.

min.

V0

V1

09/2008

13

FPS (Sigma) Flexible Network Slave units

Powerful, modular network units

The Flexible Network Slave (FNS) units are powerful, modular network units used together with the programmable controllers

FPS (Sigma). By exchanging compact network blocks, you can connect to various networking systems without having to modify

your entire hardware platform. The blocks are available for three bus systems: PROFIBUS, DeviceNet and CANopen. Others are

planned for the future.

Flexible Plug-In Network modules

The world’s ﬁrst in a PLC

PROFIBUS

Plug-in module

AFPN-AB6200

DeviceNet

Plug-in module

AFPN-AB6201

CANopen

Plug-in module

AFPN-AB6218

FPG-FNS

No special tools are required for mounting. You can mount the blocks in the device at any phase between manufacturer and end

customer without having to worry about special protective provisions.

Advantages:

ꢁ Wide range of connectivity solutions for FPS (Sigma) and FP2/FP2SH.

ꢁ One PLC hardware platform for several bus systems.

ꢁ Fast reaction on new market trends possible with existing units.

No additional hardware development needed. You need only to exchange

the network block.

ꢁ Very small and compact size.

For each network type ready-made function libraries are available for the programming software

FPWIN Pro, which can be downloaded from Panasonic Electric Works’ internet homepage. These libraries will drastically shorten

the time needed to develop your applications and consequently save valuable human resource costs. They also include a complete

online help file and programming examples. In addition, you need the GSD or EDS files which describe how the slave modules

communicate with the master module. Also these can be downloaded from the same internet homepage.

FNS (Flexible Network Slave) specifications:

Item

PROFIBUS

DeviceNet

CANopen

Automatic baud rate detection

125kbps to 500kbps

Baud rate

Isolation

9.6kbaud to 12Mbaud

10kbps to 1Mbps

Galvanically isolated bus electronics

PDO (Process Data

•ꢀCyclic connections

•ꢀCOS (Change of State)

•ꢀBit strobe connections

•ꢀPolled connections

•ꢀExplicit connections

Object) exchange via:

•ꢀCyclic synchronous

•ꢀAcyclic synchronous

•ꢀCOS

DP-V0: process data is

accessed from the

PROFIBUS network as

cyclical I/O data

Connection

types

•ꢀTimer-driven connections

Maximum

inputs/

outputs

76 words altogether for

inputs and outputs

(in units of 1.2 or 4 words) direction

E.g. for cyclic connec-

tions: 128 words in each

128 words

(for TPDOs and RPDOs)

•ꢀUCMM capable

•ꢀCIP parameter object

•ꢀDiagnostic support

Additional

features

Diagnostic support

DB9F

(9-pin D-Sub female)

Interface

5-pin terminal block

DB9M (9-pin D-sub male)

Free download for FNS-related ﬁles:

www.panasonic-electric-works.com

09/2008

14

FPS (Sigma) Fieldbus Master Units

The optimal network solution for your facility

The expansion Fieldbus Master Units (FMU) allow you to integrate FPS (Sigma) PLCs into your network with a maximum degree of

flexibility. The units are available for three bus systems: PROFIBUS, DeviceNet and CANopen. Others are planned for the future.

FPS FMU PROFIBUS:

FPS FMU DeviceNet:

FPS FMU CANopen:

FPG-DPV1-M

FPG-DEV-M

FPG-CAN-M

Advantages:

ꢁ Wide range of connectivity solutions for FPS (Sigma).

ꢁ One PLC hardware platform for several bus systems.

ꢁ Gateway function between Fieldbus types simply by connecting the

corresponding expansion units to the same CPU.

ꢁ One configuration software for various Fieldbus systems:

ꢂ one-time cost, several network types,

ꢂ only one installation necessary,

ꢂ user must only be trained to use one software.

ꢁ The configuration software is integrated in the PLC programming

software Control FPWIN Pro:

ꢂ no additional software required on the PC,

ꢂ bus-relevant global variables are automatically generated for the

PLC program

ꢁ Fieldbus Master Units (FMU) Library for PROFIBUS, DeviceNet and

CANopen can be downloaded free of charge from Panasonic Electric

Works’ internet homepage.

Control Configurator FM is an add-on

software for Control FPWIN Pro and is

used to configure and diagnose the FMUs.

Part number: AFPS35510

FMU (Fieldbus Master Unit) specifications:

Technical data

Bustype

PROFIBUS DP

RS485

DeviceNet

CANopen

CAN / ISO 11898

Number of slaves

Number of process data

125

63

3584 bytes for inputs and 3584 bytes for outputs

126

100m (12Mbit/s)

100m (500kbit/s)

250m (250kbit/s)

500m (100kbit/s)

40m (1Mbit/s)

500m (100kbit/s)

200m (1.5Mbit/s)

400m (500kbit/s)

1km (187.5kbit/s)

Bus length

Connection types

DP-V0: process data is accessed •ꢀCyclic connections

PDO (Process Data Object)

Exchange via:

•ꢀCyclic synchronous

•ꢀAcyclic synchronous

•ꢀCOS

from the PROFIBUS network

as cyclical I/O data

•ꢀCOS (Change of State)

•ꢀBit strobe connections

•ꢀPolled connections

•ꢀExplicit connections

•ꢀTimer-driven connections

Internal current consumption

Connector type

450mA

150mA

5-pin terminal block

95g

450mA

DB9F (9-pin D-Sub female)

DB9M (9-pin D-Sub male)

Weight

09/2008

15

FPS (Sigma) S-Link expansion unit

Flexible wire-saving link system S-Link

Features

ꢁ Up to four S-Link units can be attached to one FPS (Sigma) CPU.

ꢁ Each unit supports up to 128 I/O signals over a pair of wires up to a distance of 200m

(400m when a booster is used).

ꢁ The combination of input and output point quantities (a total of 128 points max.) can be set by the rotary

switch in increments of 32 points.

ꢁ The transmission line connection is realized via a T-branch multi-drop wiring with hook-up connectors.

Adding devices is rendered easy and maintenance is easy.

FPS (Sigma) + S-Link unit

S-LINK unit

FPG-SL

Features

ꢁ The four-wire cable (two signal wires and two power wires) enables efficient

wiring, and the T-branch wirinig enables a flexible connection layout.

ꢁ About 60 types of S-Link input/output devices can be

connected to this unit, enabling it to meet diverse I/O

needs. In addition, the high transmission voltage

35 Ms

(24VDC) and the wide clock width (35µs) provide high

noise immunity. Flexible and reliable wiring is available,

reducing the wiring work.

Features

ꢁ The control unit automatically recognizes I/O allocation in accordance with the attached S-Link unit

position, making the S-Link unit as easy to use as a common expansion I/O device.

ꢁ If the main wire is broken and an input/output device cannot be recognized, then the S-Link unit displays

the device number. This function significantly reduces the time required for troubleshooting during an

equipment startup check or recovering from on-site problems.

Specifications

Transmission method

Synchronization

Bi-directional time-divided multiple signal transmission

Bit synchronization, frame synchronization

S-Link protocol

Transmission protocol

Transmission line

Exclusive ﬂat cable or cabtyre cable

Transmission speed

Transmission distance *¹

Connection method

Number of I/O points

28.5kbps

Main signal wires: Extensible up to 200m (400m when a booster is used)

T-branch multi-drop wiring or multi-drop wiring

128 points max. (adjustable in encrements of 32 I/O points)

*1 For boosters, see the S-Link catalog and manual issued by SUNX Limited.

09/2008

16

FPS (Sigma)

Supports the enhancement of your equipment’s performance

Network enhancement

Modbus-compatible

FPS (Sigma) can serve as Modbus master or slave

FPS (Sigma) is compatible with the world‘s

de facto standard Modbus* and can serve

as both Modbus RTU master and slave,

making it ideal for air conditioning or

temperature control etc.

Can be used as a master station [F145 (Write) and F146 (Read) instructions].

Can easily communicate with temperature controllers, inverters, FP-e and

overseas PLCs.

Also serves as

a slave station.

* Protocol developed by Modicon Inc.,

an American company

Temperature

controller

Power meter

Inverter

FP2/FP2SH

FP-e

FP-X

Other available applications

When 17 or more FPS (Sigma) units need to be

linked, you can use the Modbus function instead

of MEWNET-W0 to link up to 99 units. Since each

FPS (Sigma) unit can be either a master or a slave,

a multi-master link can be created by passing a

token from a user program.

Token passing

A multi-master link

of up to 99 units

can be created.

Master/

Slave

Master/

Slave

Master/

Slave

Master/

Slave

New “MEWTOCOL Master” function available

The MEWTOCOL master function automatically creates and transmits commands using the Panasonic open protocol

MEWTOCOL. This function significantly facilitates serial communications with MEWTOCOL-compatible equipment, such as

PD60/65, KT4H and KW4M.

RS232C

2D code reader

PD60/65

RS485

Temperature

controller

KT4H

Eco Power Meter

KW4M

Security enhancement

Programs are copy-protected by the upload restriction setting and an eight-character password.

ꢁ The setting to inhibit the uploading of PLC programs to PCs protects your programs from unauthorized copying. (If this setting is

released, programs in the PLC are forcibly cleared.)

ꢁ An eight-character password has been adopted. (The conventional four-character password is also available.)

Approx. 218 trillion passwords can be set by combining eight alphanumeric characters, making it nearly impossible to crack the

password set.

Debugging performance enhancement

Up to 512 steps can be rewritten simultaneously in RUN mode.

This improvement allows efficient program debugging without stopping the operation.

09/2008

17

FP Web-Server

FPS (Sigma) programming and operation with LAN/WAN

Wordwide communications

The FP Web-Server module connects all FP-series controllers to the Ethernet. No changes to the

PLC program are necessary. Simply assign an IP address to the FP Web-Server and connect the

PLC to the FP Web-Server via the serial RS232C interface. A standard browser, e.g. MS Internet

Explorer, can be used for access at the PC. Configuration of the unit is easily done with the FP

Web Configurator Tool, which has to be ordered once separately.

FP Web-Server main features:

ꢁ FP Web-Server advantages:

ꢂ Uses existing intranet,

saves wiring

ꢁ Web-Server:

ꢂ PLC data presented as HTML pages

ꢂ Access via standard internet browser

ꢂ HTML entry field for PLC data change

ꢂ Optional password protection

ꢂ Java applet functions library

ꢂ Ajax JavaScript examples available

ꢂ Uses standard browser,

saves Scada software

ꢂ Remote control

ꢂ Remote monitoring

ꢂ Remote programming

ꢂ Alarm information via email

ꢂ Interface/protocol converter

ꢁ Email:

ꢂ PLC can send emails, also with PLC data attachments

ꢂ Email server access via LAN or Internet dial-up

ꢂ PLC defined or pre-stored mail text

FPWEB2

ꢁ RS232C device server:

ꢂ Ethernet ↔ RS232C conversion (MEWTOCOL)

ꢂ Transparent RS232C data tunnelling via Ethernet

ꢂ Programming and visualisation access via Ethernet

ꢁ IEC60870 communicator

Based on the same hardware as the FP Web-Server safe

and easy telecontrol with FP-series PLCs using the wide

spread IEC60870-5 telecontrol standard is possible. Thus

remote process stations can easily be linked to supervisory

control systems or telecontrol main stations. The IEC60870

communicator supports both IEC60870-5-101 communication

via RS232C or modem and IEC60870-5-104 communication

via Ethernet in one module.

ꢁ Modem / Ethernet gateway:

ꢂ FP Web-Server can be dialled up via modem for local or

network access

ꢂ One remote gateway for multiple FP Web-Servers in a

local Ethernet network

ꢂ Remote password handling

Speciﬁcations

ꢁ Modbus-TCP communication

TCP/IP, UDP/IP, SMTP, PPP, NTP, FTP, TELNET,

ꢂ Modbus-TCP server or client for a PLC

ꢂ Modbus-TCP server for multiple PLCs

ꢂ Modbus-TCP server gateway for Modbus-RTU slave

unit(s)

ꢂ Modbus-TCP client gateway for any Modbus-RTU master

ꢂ Modbus-TCP master or slave interface for a PLC

Protocols

HTTP, MEWTOCOL-COM

Number of

browsers

Up to 64 browsers can be connected to one

FP Web-Server

4 predeﬁned in FP Web Flash memory

1 programmable in PLC DT memory as ASCII

Number of emails

4 predeﬁned in FP Web ﬂash memory,

1000 addresses in PLC DT memory, assuming

an average of 32 characters are used per email

address and that an FP0-T32CP with

16k word memory is used

Number of email

addresses

ꢁ Other functions:

ꢂ XML file delivery for PLC data exchange

ꢂ Network time server functions

Two PLCs can be connected

3-pin port (port number: 9094)

DB8 port (port number: 9095)

Number of PLC

per unit

IP address

DHCP or manually set by software

Password and DIP switch

24VDC, 75mA (max.)

Part number

Security

FP Web-Server

FPWEB2

Operating power

Dimensions

Licence to upgrade an

FP Web-Server to an

IEC60870 communi-

cator

25 x 90 x 60mm (W x H x D)

IEC60870LIS

Power, COM Ethernet connection, COM data

exchange

LEDs

Flash memory

512Kbytes

FP Web

Conﬁgurator Tool

FPWEBTOOL2

Standards fulﬁlled

CE, UL, cUL

09/2008

18

Control FPWIN Pro

PLC programming software conforming to IEC 61131-3

FPWIN Pro is the Panasonic programming software developed according to the international standard IEC 61131-3

(for Windows 98, NT V4.0, 2000, ME or XP). This new version is a result of experience gained over many years. We were one

of the first PLC manufacturers to offer an IEC 61131-3 programming software, and we are a leading member of the international

organisation PLCopen.

Multiple address assigment

is caught automatically by

the compiler.

Local variables are allocated

automatically by the compiler.

Type safe programming using

simple or complex data types.

Input and output variables

are defined once in the global

variable list.

Comfortable programming in the graphical

LD editor (ladder diagram).

Functions can be saved in

libraries for future reuse.

One instruction for different data types

(overloaded instructions).

Temporary variables are allocated and

released automatically by the compiler.

Navigator with tree representation of

called functions provides an overview

even for very complex projects.

Long variable names make the program

self-explanatory.

The SFC editor (Sequential Function Chart)

allows you to easily visualize processes.

Additional window for monitoring

and forcing variables.

Special functions for controlling the SFC

program from another program.

Using alliases names for PLC-independent

access on the special data registers, e.g. RTC

The ST editor (Structured

Text) solves complex

programming tasks.

No. C-35

04.04.2003

DS: 10 of 26

Structuring with

selection statements.

No. C-34

ST

April 4, 2003

Data types supported: 10 of 26

Using STRING functions

for analyzing incoming

data…

Using loops for running

through incoming data…

Easy handling of

formulas and

arithmetic

Free demonstration disc

…or for generating

formatted output strings.

expressions.

…or arrays.

The most important highlights at a glance:

ꢁ One software for all FP-series PLCs.

ꢁ 5 programming languages (instruction list, ladder diagram, function block diagram,

sequential function chart, structured text) available for all PLCs.

ꢁ Program organisation units, task and project management provide clear structure.

ꢁ Reuse of ready-made functions and function blocks saves time for programming and

debugging.

ꢁ Online monitoring and diagnostics.

ꢁ Forcing – turning off input and output contacts via the PC.

ꢁ Modem communication for remote programming, service and diagnostics.

ꢁ Extensive comments – online documentation created hand in hand with the program.

ꢁ 6 languages are supported: English, German, French, Italian, Spanish and Japanese.

Part numbers:

FPWINPROF: Full version

supports all FP-series PLCs

FPWINPROS: Small version,

supports FP-e, FP0, FP-X

and FPS (Sigma)

09/2008

19

FPS (Sigma)

Specification tables

Performance speciﬁcations

Item

Description

Type of control unit

NPN transistor output type

PNP transistor output type

Relay output type

FPG-C32T2H-A

FPG-C32T2HTM

FPG-C28P2H-A

FPG-C28P2HTM

FPG-C24R2H-A

FPG-C24R2HTM

Part number

Number of I/O points

No expansion

32 (Input: 16 / Output: 16)

Max. 384

28 (Input: 16 / Output:12)

Max. 380

24 (Input: 16 / Output: 8)

Max. 376

With expansion

Program memory

Program capacity

Operation speed

Memory for execution

External input (X)

External output (Y)

Internal relay (R)

Built-in Flash ROM (without backup battery)

32,000 steps

0.32 µs/step, basic instructions

1184 points

4096 points (R0 to R255F)

1024 points 1, 2 / at reset: timer 1008 points (T0-T1007), counter 16 points (C1008-C1023),

Timer range is selected by instructions from 1ms, 10ms, 100ms, 1s

Counter: 1 to 32,767 counts

Timer/Counter (T/C)

Link relay (L)

2048 points¹

Data register (DT)

32,765 words (DT0-DT32,764)¹

Link data register (LD)

Index register (I)

256 words¹

14 words (I0-ID)

Differential points

Unlimited number of points

Master control relay points

Labels (JP+LOOP)

Number of step ladder

Number of subroutine

High-speed counter

Pulse output

256 points

256 labels

1000 stages

100 subroutines

Single-phase: 1ch: 50kHz/2ch: 30kHz/3 or 4ch: 20kHz / Two-phase: 1ch: 20kHz/2ch: 15kHz

1 channel: 100kHz / 2 channel: 60kHz

PWM output

2 channels, 1.5 to 12.5kHz (at resolution of 1000) / 15.6 to 41.7kHz (at resolution of 100)

8 points (X0-X7)

Pulse catch input

Interrupt program

9 programs (external 8 points, 1 periodical interrupt point 0.5ms–30s)

Watchdog timer, program syntax checking, etc.

Self-diagnosis functions

Clock/calendar function

Volume input

6

Year, month, day, hour, minute, second, and day of week

2 points resolving power 10bits (K0-K1000)

Thermistor input

2 points, resolution: 10 bits (0 to 1000) (for C32T2HTM, C24R2HTM and C28P2HTM only)

3, 4

5

Link functions

Computer link (1:1, 1:N)

General communication (1:1, 1:N)

PLC link

220 days or more* (actual usage value: approx. 840 days (25°C)

Suggested replacement interval: 1 year

Battery life (battery is optional)

Comment storage

All kinds of comments, including I/O comments, remarks and block comments, can be stored

(without backup battery)

Linear/circular interpolution

for positioning

Available

Not available

Program edition during run, constant scan, forced I/O, password, ﬂoating point real number operation,

PID processing instruction, comment memory 328kByte

Other functions

Notes:

1) If a battery is not used, only fixed area is backed up (Counter: C1008-C1023, internal relay: R900-R97F, Data register: DT32710-DT32764). If a battery is used, backup is possible:

Area-setting of hold or no-hold is possible by system register.

2) Points can be increased using auxiliary timer.

3) Optional communication cassette (RS232C type) is necessary for 1:1 communication.

4) Optional communication cassette (RS485 type) is necessary for 1:N communication.

5) Optional communication cassette (RS485 type) is necessary.

6) Optional battery is necessary in order to use Clock/Calendar function. Precision calendar timer: at 25°C = 77°F less than 51-second error per month / at 0°C = 32°F less than

119-second error per month / at 55°C = 131°F less than 148-second error per month.

*Value applies when no power is supplied at all.

09/2008

20

FPS (Sigma)

Specification tables

Input speciﬁcations

Insulation method

Rated input voltage

Input voltage range

Rated input current

Optical coupler

24VDC

21.6 to 26.4VDC

3.5mA–8mA depends on input no.

8 points/common (FPG-C24), 16 points/common (FPG-C32/C28), 32 points/common (FPG-XY64)

Either the positive or negative of input power supply can be connected to terminal

Input points per common

Min. ON voltage /

Max. OFF current

19.2V / 3mA–6mA depending on input no.

Max. ON voltage /

Min. OFF current

2.4V / 1.3mA

Input impedance

3k–6.8k depends on input no.

1ms or less, 5µs (HSC, pulse catch, interrupt input)

0.2ms (OFF → ON)

0.3ms (ON → OFF)

CPU:

Expansion:

Response time

LED

Operating indicator

Output speciﬁcations – Transistor output type

FPG-C32 (NPN)

FPG-C28 (PNP)

Item

Optical coupler

Insulation method

Output method

Open collector

5 to 24VDC

24VDC

Rated voltage range

Operating load voltage range

Max. load current

Max. surge current

Output points per common

4.75 to 26.4VDC

21.6 to 26.4VDC

For Y0, Y1, Y3, Y4: 0.3A – For Y2, Y5 to YF: 0.1A

For Y0, Y1, Y3, Y4: 0.9A – For Y2, Y5 to YF: 0.5A

16 points/common

For Y0, Y1, Y3, Y4: 0.5A – For Y2, Y5 to YB: 0.3A

For Y0, Y1, Y3, Y4: 1.5A – For Y2, Y5 to YB: 0.7A

12 points/common

For Y0, Y1, Y3, Y4 at 15mA or less: <2µs – For Y2, Y5 and higher: < 0.2ms

For Y0, Y1, Y3, Y4 at 15mA or less: <8µs – For Y2, Y5 and higher: < 0.5ms

OFF → ON

ON → OFF

Response time

Power supply for driving

internal circuit

21.6 to 26.4VDC (70mA)

LED

Operating indicator

Thermal protection for Y2, Y5 and higher

Phase fault protection

Output speciﬁcations – relay output type

Normally open (1 Form A)

Output type

2A 250VAC, 2A 30VDC (max. 4.5A/common) (resistive load)

8 points/common

Rated control capacity

Output points per common

OFF → ON

ON → OFF

10ms or less

8ms or less

Response time

20 million operations or more

Mechanical life time

Electrical life time

Surge absorber

100,000 operations or more

None

LED

Operating indicator

98m/s2 or more,

4 times on 3 axes

Shock resistance

1000V (p-p) with

pulse widths 50ns and 1µs

Noise humidity

Operating condition

Free from corrosive gasses and excessive dust

09/2008

21

FPS (Sigma) product overview

Part numbers

FPS (Sigma) control units

Product name

Part number

FPS C28 CPU, 16 inputs, 12 outputs (transistor PNP)

FPS C32 CPU, 16 inputs, 16 outputs (transistor NPN)

FPS C24 CPU, 16 inputs, 8 outputs (relay)

FPS C28 CPU, 16 inputs (+ 2 thermistor inputs) , 12 outputs (transistor PNP)

FPS C32 CPU, 16 inputs (+ 2 thermistor inputs) , 16 outputs (transistor NPN)

FPS C24 CPU, 16 inputs (+ 2 thermistor inputs), 8 outputs (relay)

FPG-C28P2H-A

FPG-C32T2H-A

FPG-C24R2H-A

FPG-C28P2HTM

FPG-C32T2HTM

FPG-C24R2HTM

FPS (Sigma) expansion units (left side expansion)

FPS 64-points I/O expansion unit, 32 inputs, 32 outputs (transistor PNP)

FPS 64-points I/O expansion unit, 32 inputs, 32 outputs (transistor NPN)

FPS memory expansion unit, 256k words

FPG-XY64D2P-A

FPG-XY64D2T-A

FPG-EM1

FPS positioning expansion unit, 1 axis type, transistor output

FPS positioning expansion unit, 1 axis type, line driver output

FPS positioning expansion unit, 2 axes type, transistor output

FPS positioning expansion unit, 2 axes type, line driver output

FPS positioning expansion unit RTEX, 2 axes type

FPS positioning expansion unit RTEX, 4 axes type

FPS positioning expansion unit RTEX, 8 axes type

FPS PROFIBUS master expansion unit

FPG-PP11

FPG-PP12

FPG-PP21

FPG-PP22

FPG-PN2AN

FPG-PN4AN

FPG-PN8AN

FPG-DPV1-M

FPGFNS + AFPNAB6200

FPG-CAN-M

FPS FNS + PROFIBUS DP slave module

FPS CANopen master expansion unit

FPS FNS + CANopen slave module

FPS DeviceNet master expansion unit

FPGFNS + AFPNAB6218

FPG-DEV-M

FPS FNS + DeviceNet slave module

FPS S-Link master expansion unit

FPGFNS + AFPNAB6201

FPG-SL

FPS CC-Link slave expansion unit

FPG-CCLS

FP0 expansion units (right side expansion)

FP0-E8RS, 4 inputs, 4 outputs (relay)

FP0-E8X, 8 inputs

FP0-E8RSA

FP0-E8XA

FP0-E8YPA

FP0-E8YTA

FP0-E16RSA

FP0-E16PA

FP0-E16TA

FP0-E16XA

FP0-E16YPA

FP0-E16YTA

FP0-E32PA

FP0-E32RS

FP0-E32T

FP0-A21A

FP0-A04V

FP0-A04I

FP0-E8YP, 8 outputs (transistor PNP)

FP0-E8YT, 8 outputs (transistor NPN)

FP0-E16RS, 8 inputs, 8 outputs (relay)

FP0-E16P, 8 inputs, 8 outputs (transistor, PNP)

FP0-E16T, 8 inputs, 8 outputs (transistor, NPN)

FP0-E16X, 16 inputs

FP0-E16YP, 16 outputs (transistor PNP)

FP0-E16YT, 16 outputs (transistor NPN)

FP0-E32PA, 16 inputs, 16 outputs (PNP)

FP0-E32RS, 16 inputs, 16 outputs (relay)

FP0-E32T 16 inputs, 16 outputs (NPN)

FP0-A21A, 2 analog inputs, 1 analog output

FP0A04V, 4 analog outputs, -10 to 10V

FP0-A04I, 4 analog outputs, 4 to 20mA

FP0-A80A, 8 analog inputs

FP0-A80A

FP0-TC4

FP0 thermocouple unit, 4 inputs

FP0 thermocouple unit, 8 inputs

FP0-TC8

FP0 RTD input unit, 6 inputs

FP0-RTD6

FPWEB2

FP Web-Server

09/2008

22

FPS (Sigma) product overview

Part numbers

FPS (Sigma) accessories

Product name

Part number

FPS 1 channel, RS232C type communication cassette

FPS 2 channels, RS232C type communication cassette

FPS 1 channel, RS485 type communication cassette

FPS 2 channels, RS232C & RS485 type communication cassette

FPS battery, for memory backup & clock functions

FPS power supply cable, 1m

FPG-COM1

FPG-COM2

FPG-COM3

FPG-COM4

AFPG804

AFPG805

AFPG807

AFP8670

High capacity battery holder

FP memory loader, for transfer of programs without a PC or memory unit (data clear type)

FP memory loader, for transfer of programs without a PC or memory unit (data hold type)

AFP8671

AC power supply

FP0 AC power supply, 24VDC, 0.7A

FP Power supply, 24VDC, 2.1A

FP0-PSA2

FPPS24050ED

Software

FPWIN Pro PLC programming software, small version for

FP-e, FP0, FPS (Sigma) and FP-X

with English manual

FPWINPROSEN5

FPWINPROSDE5

FPWINPROSFR5

with German manual

with French manual

FPWIN Pro PLC programming software, full version for all FP-series PLCs

with English manual

with German manual

with French manual

FPWINPROFEN5

FPWINPROFDE5

FPWINPROFFR5

FP OPC server software with one license

AFPS03510D

AFPS03517D

AFPS04510D

AFPS35510

AFPS66510

AFW10031

AFW20031

AFW1033

FP OPC Server license

FP Data Analyzer software tool to read and display PLC data

Control conﬁgurator FM, conﬁguration software for FPS (Sigma) FMU

Conﬁgurator PM software tool for FPS (Sigma) positioning units RTEX

PCWAY data monitoring, logging and setting software based on Microsoft Excel

CommX software with USB port dongle

USB port dongle for CommX and PCWAY

09/2008

23

Global Network

North America

Europe

Asia Pacific

China

Japan

Panasonic Electric Works

Please contact our Global Sales Companies in:

Europe



Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Tel. +49 (0) 8024 648-0, Fax +49 (0) 8024 648-111, www.panasonic-electric-works.com

Rep. of PEWDE, Josef Madersperger Str. 2, 2362 Biedermannsdorf, Tel. +43 (0) 2236-26846, Fax +43 (0) 2236-46133

www.panasonic-electric-works.at

Headquarters

Austria

Panasonic Electric Works Europe AG

Panasonic Electric Works Austria GmbH

Ennshafenstraße 30, 4470 Enns, Tel. +43 (0) 7223 883, Fax +43 (0) 7223 88333, www.panasonic-electronic-materials.com

De Rijn 4, (Postbus 211), 5684 PJ Best, (5680 AE Best), Netherlands, Tel. +31 (0) 499 372727, Fax +31 (0) 499 372185,

www.panasonic-electric-works.nl

PEW Electronic Materials Europe GmbH

Panasonic Electric Works

Sales Western Europe B.V.



Benelux



Prumyslová 1, 34815 Planá, Tel. (+420-)374 799 990, Fax (+420-)374 799 999, www.panasonic-electric-works.cz

Succursale française, 10, rue des petits ruisseaux, 91370 Verrières Le Buisson, Tél. +33 (0) 1 6013 5757, Fax +33 (0) 1 6013 5758,

www.panasonic-electric-works.fr

Czech Republic Panasonic Electric Works Czech s.r.o.

France

Panasonic Electric Works

Sales Western Europe B.V.



Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Tel. +49 (0) 8024 648-0, Fax +49 (0) 8024 648-555, www.panasonic-electric-works.de

Magyarországi Közvetlen Kereskedelmi Képviselet, 1117 Budapest, Neumann János u. 1., Tel. +36 (0) 1482-9258, Fax +36 (0) 1482-9259,

www.panasonic-electric-works.hu

Germany

Hungary

Panasonic Electric Works Deutschland GmbH

Panasonic Electric Works Europe AG



Dublin, Tel. +353 (0) 14600969, Fax +353 (0) 14601131, www.panasonic-electric-works.co.uk

Via del Commercio 3-5 (Z.I. Ferlina), 37012 Bussolengo (VR), Tel. +39 (0) 456752711, Fax +39 (0) 456700444,

www.panasonic-electric-works.it

Ireland

Italy

Panasonic Electric Works UK Ltd.

Panasonic Electric Works Italia srl

Building Materials Division, Piazza della Repubblica 24, 20154 Milano MI, Tel. +39-02-2900-5391, Fax +39-02-2900-3466

Sjöängsvägen 10, 19272 Sollentuna, Sweden, Tel. +46 859476680, Fax +46 859476690, www.panasonic-electric-works.se

Citadellsvägen 23, 21118 Malmö, Tel. +46 40 697 7000, Fax +46 40 697 7099, www.panasonic-ﬁre-security.com

Al. Krakowska 4/6, 02-284 Warszawa, Tel. +48 (0) 22 338-11-33, Fax +48 (0) 22 338-12-00, www.panasonic-electric-works.pl

Portuguese Branch Ofﬁce, Avda Adelino Amaro da Costa 728 R/C J, 2750-277 Cascais, Tel. +351 214812520, Fax +351 214812529

Barajas Park, San Severo 20, 28042 Madrid, Tel. +34 913293875, Fax +34 913292976, www.panasonic-electric-works.es

Grundstrasse 8, 6343 Rotkreuz, Tel. +41 (0) 41 7997050, Fax +41 (0) 41 7997055, www.panasonic-electric-works.ch

Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6 LF, Tel. +44 (0) 1908 231555, Fax +44 (0) 1908 231599,

www.panasonic-electric-works.co.uk

Panasonic Electric Works Italia Srl

Nordic Countries Panasonic Electric Works Nordic AB

PEW Fire&Security Technology Europe AB



Poland

Portugal

Spain

Panasonic Electric Works Polska sp. z o.o

Panasonic Electric Works España S.A.

Panasonic Electric Works Schweiz AG

Switzerland

United Kingdom Panasonic Electric Works UK Ltd.

North & South America



629 Central Avenue, New Providence, N.J. 07974, Tel. 1-908-464-3550, Fax 1-908-464-8513, www.pewa.panasonic.com

USA

PEW Corporation of America

Asia Paciﬁc/China/Japan



Level 2, Tower W3, The Towers Oriental Plaza, No. 2, East Chang An Ave., Dong Cheng District, Beijing 100738, Tel. (010) 8518-5988,

Fax (010) 8518-1297

RM1205-9, 12/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (0852) 2956-3118, Fax (0852) 2956-0398

China

Panasonic Electric Works (China) Co., Ltd.

Hong Kong

Panasonic Electric Works

(Hong Kong) Co., Ltd.



1048 Kadoma, Kadoma-shi, Osaka 571-8686, Japan, Tel. (06) 6908-1050, Fax (06) 6908-5781, www.mew.co.jp/e-acg/

101 Thomson Road, #25-03/05, United Square, Singapore 307591, Tel. (06255) 5473, Fax (06253) 5689

Japan

Singapore

Matsushita Electric Works, Ltd.

Panasonic Electric Works Asia Paciﬁc Pte. Ltd.

ꢀ

ꢀꢀ

4136ꢀeuenꢀ08/08

09/2008


型号：	FP0-E8XA
厂家：	PANASONIC
描述：	Programmable Controllers
文件：	总24页 (文件大小：2480K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FP0-E8XA [PANASONIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E